Issue with IP address resource

Hi
I have been having an issue on our file server cluster recently where an IP address for the backup LAN scope will not come online. This happened a few days ago and the IP address eventually went online, but now it has been failing for over of day with the
following message in cluster logs (Client Identifying information removed):
000040a8.000020c8::2014/05/15-11:19:42.768 WARN [RES] IP Address <IP Address 10.*.*.*>: NetInterface *************-****-****-************ is not reachable. Wait & retry.
000040a8.000020c8::2014/05/15-11:19:43.782 ERR [RES] IP Address <IP Address 10.*.*.*>: Timed out waiting for NetInterface *************-****-****-************ to be available. Failing resource.
I can not see any issue with network cards, and this issue occured even on another node. This single resource failing is also causing the networks in that scope to show as failed.
Update:
I have been able to get this issue to resolve by reapplying the Static Routes (even though they show as already existing when I put them in). The resource then goes online. Unfortunately this reoccurs on a daily basis.

Hi DH84,
I see what you say but when you can write static route please you use interface ID.
It is a best practise for all cluster systems
For example, here is my route table, the interface id 7 is my data nw. when i write a static route it must be;
route add x.x.x.x mask 255.255.255.0 x.x.x.x if 7
Regards

Similar Messages

I have an issue with the address browser in mail in Yosemite

I am using IOS 10.10.1 now on an iMac and have discovered an issue with the address browser in mail.
Previously in my pending to send email toolbar there was a contacts icon which I clicked on to display my contacts list. I could hold down the Command button and select as many contacts I wanted (often up to 100), then select the field to send (to, ccc, bcc) and the contact would appear.
Now, I have to click the + sign at the end of the field line, and select recipients one at a time. Not only that, but I have to click twice to get to the email address, once on the name and then the email address drops down under the name and then I click on the email address. When I do that the drop down box disappears and the recipient's email address goes to the field. I have tried all combinations of buttons to be able to choose multiple addresses but haven't found the right one yet.
An Apple Support guy told me to open my regular Address book, and hold down the command button to choose multiple recipients then drag them to the field on my already opened send email.
This is one way around the issue (which wasn't an issue in Mavericks) but where some recipients have two or more email addresses listed in my contacts it means I have to manually go through the finished list on my emails to make sure the most desired one was selected. What a pain.
Also, previously, where I was sending out many emails and wanted to stop say half way down my list, and send, I could come back to that list for the next email and see where I'd got up to.
I don't want to make groups because my recipients vary depending on what I am sending so my lists change constantly.
Any suggestions?
Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
Cheers,

Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

I am having issues with the address book in iphone 4s ios 7. it won't let me add an address to a new contact. anybody knows what's going on ?

I am having issues with the address book in iphone 4s ios 7. it won't let me add and adress for a new contact. anybody has an idea of what's wrong and the solution ?

Do you have Restrictions turned on in Settings>General?

Has anyone had an issue with group addressing in OS X 10.9 Mail

Has anyone had an issue with group addresses in Mail after installing Mavericks? Both my MBP-15 and my Mac Pro stopped automatically filling in the addresses when I typed the name of the group that I have in Contacts, after updating to Mavericks. Prior to updating they worked just fine.

Hi,
I just found these work arounds.
https://discussions.apple.com/thread/5490015?tstart=0
The first is appropriate if you want to send as an undlisclosed resicpient. The second method shows all addresses.

Issue with Delivery Address in PO

Hi All,
I have an Issue with Purchase order. PO created with delivery address ( # 27856 ) on 2007. PO item got deleted and address # 27856 also deleted from table ADRC. When I try to change or display the PO we got the message Address # 27856 doesn't exit and not able to do anything. We came out fom the PO screen.
Please any one guide me how to fix the Issue WITHOUT creating an New PO.
Regards,
Senthil

Hi,
PO item got deleted means Deletion indicator has been set for the PO. PO was not archived.
When I execute the ADRC table with the address number 27856 i didn't get any output. It shows no table entries available.
The exact message i got was
Address doesn't exist 27856 4500178450 00010
Message no. AM010
I can't do anything in the PO.
Please guide,
Regards,
Senthil

Issues with Firefox hogging resources...

I have several issues with Firefox intermittently consuming 99-100% of my CPU memory. Now, let me preface this by saying that I am NOT an advanced user, and can only tell you what I see on things like the Task Manager and such. Furthermore, I know that you guys know about some of this stuff - at least, I am pretty sure you do - but I am nowhere near comfortable enough to mess with any command line... stuff... in Firefox. I just am not knowledgeable enough about the program, and I don't want to 'break' it (lol). Anyway, down to business. Here are the issues I am having:
1. Upon startup, Firfox takes between 30 seconds and a minute and a half to load 5 tabs. When I first downloaded and installed it, these same tabs took less than 10 seconds to load. I have tried clearing my cache and history but nothing seems to help. If it matters, I have been using Firefox for going on 5 years now.
2. Once the program has loaded, '''any''' keyboard shortcuts I use in it (ctrl+a, ctrl+c or v, alt=tab, etc) cause the CPU memory usage of Firefox to spike to 99 or 100 percent. In affect, it freezes my computer for anywhere between 2 and 30 seconds, roughly. It does this usually, but not always, and I frequent all the same sites, so the page I am on does not seem to matter.
3. I have noticed that some of the addons I use with Firefox, mainly Multi Links, lag as well when the above issue is occurring. Not sure if the two are connected in any way (also not sure why that feature is not ''built into Firefox to begin with'') and would have checked this but I will not risk not being able to get back here again. See below.
4. This is unrelated, but I felt it merited some small mention. This is effectively my SIXTH attempt at posting my query. The first time, I created an account and it forwarded me to some page basically saying 'Yup, you're logged in alright.' Then it KEPT doing that every time I tried to flesh out and ask my question, until I navigated COMPLETELY away from the page ''four times'' and attempted this one last time. Very frustrating. I even tried going to Live Chat for help, but somehow got off the chat window page and then suddenly chat was closed... right. Anyway, point being, it was difficult to get this posted and it has me even more annoyed. >.<
I have always loved Firefox because it was faster and more reliable than IE. But here recently... it just seems to be going downhill. For instance, I have seen others ask questions about what's going on with the plugin container and that stupid flash plugin - I happen to have that issue rather severely, to the point that I must leave Flash off entirely until I ''have to'' turn it back on (which is wearing down my last nerve, I might add, since I use sites that require that particular plugin daily), and while I did see a couple rather nice solutions about editing/tweaking internal Firefox settings, I must profess that I am nowhere near competent or comfortable enough to even think about attempting them. Furthermore, I do not believe I should be required to make such changes in order to get the program to function properly and risk ruining it completely so that I have to uninstall and reinstall just so I have Firefox. This is all rather exasperating, and judging from the replies I saw on those topics, I do not expect much help here (a couple of people were rather rude on one of those topics, I am afraid I am a minority here, not knowing my way around program language and all =( ). My main goal is to make you aware, if you are not already, that issues exist and if you have tried anything on your end to rectify them, it has not worked for some. I am at my wit's end here, I do not know what else to do to try to solve these issues other than clear cache and history, restart Firefox, so on and so forth. *sigh* I'm seriously thinking about going back to IE, and you have no idea how much that really ticks me off; I think, out of all of this, even all my wasted time, that's what upsets me the most.

Issues of this sort are, unfortunately, more common and the we'd like them to be. However, they tend not to be cause by Firefox itself, but rather by software that is running either inside or alongside it, such as add-ons or firewalls. Since these issues have a broad span of possible causes, you need to diagnose your problems before fixing them. Follow these instructions ''to the line'', as they'll probably help you diagnose and fix the problems you're having.
#run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your problem, be it with RAM or CPU usage, then you know it's a problem with add-ons (plugins, themes or extensions). Proceed to number 2. If safe-mode doesn't fix your problem, then read bellow, after this list;
#update all extensions (go into ''Tools > Add-ons > Extensions > Find Updates''), themes and plugins (see [https://www.mozilla.com/en-US/plugincheck/ this page] in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions, themes and plugins in your Firefox (not running safe-mode). This is temporary and for diagnostic purposes only. Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you actually want that plugin to be enabled. It's best to keep the overall number of enabled plugins as low as possible. When you encounter problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all. If you need support for a problematic plugin, you need to contact its author for support;
#enable one extension at a time. Again, be certain that you actually want that extension to be enabled. As with plguins, it's best to keep the overall number of enabled extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all. Just the same as with plugins, if you need support for a problematic extension/plugin, you need to contact its author;
#if you've followed my instructions above, you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their authors for support.
Ok, now... ''If'' disabling all extensions and plugins through safe-mode didn't work to fix your problems (or, in other words, if you've just read number 1 on the list above and come straight here), then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Detecting which program it is may be tricky, but the following list should help you. Make sure you follow it carefully. Don't forget to answer the question on the last point, if nothing else helps.
#try reinstalling Firefox. No data will be lost. You can get the latest version (for free, as always) at [http://www.getfirefox.com/ getfirefox.com]. Make sure you [http://support.mozilla.com/en-US/kb/Uninstalling+Firefox uninstall Firefox] prior to reinstalling it. For help installing Firefox, see [https://support.mozilla.com/en-US/kb/Installing+Firefox this support article]. If that doesn't fix the problem, proceed;
#do a virus/malware check on your computer. See [https://support.mozilla.com/en-US/kb/Is+my+Firefox+problem+a+result+of+malware?s=malware&as=s this support article] for help on this point. ''This is a very important step'', so please pay attention to it. If your problem is not due to viruses/malware, proceed;
#disable all software running in the background that you don't want to have running in the background (in Windows operating systems, this is done by pressing WINDOWS+R in your keyboard, typing ''msconfig'' and pressing Enter; now, under the ''Startup'' tab, you can uncheck the software you don't want, and reboot your system for changes to take effect; if you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
#check if your firewall/antivirus/security suite is conflicting in any way with Firefox's normal behavior. Check for enabled functions/features that you don't want and/or may be causing problems with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them temporarily to see whether or not that's true. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem, it's remotely possible. If this doesn't work, proceed to the following point;
#update your modem/router software. There have been some reports that some modem/router software may cause Firefox and other browsers to loose performance and/or stability. If updating doesn't fix your issue, try other versions of the software, if possible. If you need support with this, contact your modem/router manufacturer. If this doesn't help, proceed;
#if you are using a Windows operating system, clean up your OS registry using appropriate software. There have been reports that badly maintained Windows Registries may case problems with Firefox. If this doesn't help, see the following point;
#please try creating a new temporary Firefox profile ([http://support.mozilla.com/en-US/kb/Managing+profiles managing profiles]) and see if the issues persist. Please report the results, so we can help you further.

Issue with Home Address and Phone of ESS(data not getting saved)

Hi Everyone,
We have a issue with ESS HomeAddress and Phone. when we edit and save data, its showing a message that data is saved. but the data is not getting updated in the backend and the view also is showing old data only. Pleas help us, if anyone came across this type of issue.
Thanks & Regards,
Ravi

Please check the fields you are editing are not marked as unused in
V_T588M
V_T588MFPROPS
V_T588MFPROPC
Best wishes
Stuart

BPM Studio-Issue with Creating External Resources - Oracle Database RAC

Hi All,
This must be an easy fix and hope you guys have an answer to it. I was having no issues connecting to a single instance database as the parameter Host = "xxx.111.200.10" for a SQL Database Oracle 10,11 driver is pointing to a single instance and the SID = "yyyyy". TNS Name entry is as below...
xyz =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxx.111.200.10)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = yyyyy)
However we have upgrade our oracle database and it is in a RAC with load balancing hence the TNS Name entry looks like this.
xyz =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = abcdh-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = abcdi-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = yyyy.abcd.com)
Any combination using "xyz", "abcdh-vip" , "abcdi-vip" etc is erroring and I am getting the following error:
[BEA][Oracle JDBC Driver]Error establishing socket. Unknown host: abcdh-vip
java.sql.SQLException: [BEA][Oracle JDBC Driver]Error establishing socket. Unknown host: abcdh-vip
     at albpm.jdbc.base.BaseExceptions.createException(Unknown Source)
     at albpm.jdbc.base.BaseExceptions.getException(Unknown Source)
     at albpm.jdbc.oracle.OracleImplConnection.makeConnectionHelper(Unknown Source)
     at albpm.jdbc.oracle.OracleImplConnection.makeConnection(Unknown Source)
     at albpm.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source)
     at albpm.jdbc.oracle.OracleImplConnection.open(Unknown Source)
     at albpm.jdbc.base.BaseConnection.connect(Unknown Source)
     at albpm.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
     at albpm.jdbc.base.BaseConnection.open(Unknown Source)
     at albpm.jdbc.base.BaseDriver.connect(Unknown Source)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.connector.impl.DriverManagerHack.getConnection(DriverManagerHack.java:49)
     at fuego.connector.impl.BaseJDBCConnector.createJDBConnection(BaseJDBCConnector.java:205)
     at fuego.jdbc.FaultTolerantConnection.createConnection(FaultTolerantConnection.java:917)
     at fuego.jdbc.FaultTolerantConnection.getConnection(FaultTolerantConnection.java:871)
     at fuego.jdbc.FaultTolerantConnection.getMetaData(FaultTolerantConnection.java:163)
     at fuego.sqlintrospector.BrowserPanel.populateTree(BrowserPanel.java:220)
     at fuego.ui.wizards.ui.CheckTreeBrowser$1.construct(CheckTreeBrowser.java:63)
     at fuego.ui.SwingWorker$2.run(SwingWorker.java:39)
     at java.lang.Thread.run(Unknown Source)
Any help would be highly appreciated.
Regards,

Hi,
Sure you've probably tried this but here goes...
Use the Oracle Driver that comes with Oracle BPM to integrate with RAC.
To integrate to Oracle RAC, you're typically given something like this by the DBA.
jdbc:oracle:thin:@(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = atwood-vip.int.westgroup.com)(PORT = 1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = kenwood-vip.int.westgroup.com)(PORT = 1521)) ) (CONNECT_DATA = (Service_name = bpms_pot_dev.int.westgroup.com) (SERVER = DEDICATED) ) )
When defining the External Resource for Oracle RAC check the “Advanced” checkbox (not the tab) and insert this text into the “Database” field:
//atwood-vip.int.westgroup.com:1521;ServiceName=bpms_pot_dev.int.westgroup.com;LoadBalancing=true;AlternateServers=(kenwood-vip.int.westgroup.com:1521)
Hope this helps,
Dan

Oracle 10g R2 - Metadata Issue With Version Controlled Resources

We are trying to utilize the Oracle 10g R2 feature that allows user-defined metadata to be attached to XML DB resources. However, we are encountering errors when we try to append/attach metadata to a version-controlled resource (VCR). The following steps were followed:
1. Register a new schema to be used for metadata (XMLSCHEMA.registerSchema).
2. Add a new resource to to the XML DB and make it version controlled (DBMS_XDB.createResource and DBMS_XDB_VERSION.makeVersioned).
3. Checkout the newly created version-controlled resource (DBMS_XDB_VERSION.checkout)
4. Add metadata to the version-controlled resource (DBMS_XDB.appendResourceMetadata)
However, after step 4, the errors shown below are encountered:
========================================================
begin
ERROR at line 1:
ORA-00600: internal error code, arguments: [qmxStrCopy: INLOB 2], [], [], [],
ORA-06512: at "XDB.DBMS_XDB", line 890
ORA-06512: at line 2
========================================================
The steps followed for adding metadata to a resource were taken from Chapter 26 of the "Oracle XML DB Developer's Guide 10G Release 2" (http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb_repos_meta.htm#sthref2302).
Is is possible to append and maintain metadata to an XML DB version controlled resource (VCR)? If so, what are the correct steps to do this? Note that if this is tried with a resource that is not version controlled, then no errors are encountered.
Thanks,
Steve

It appears that this issue has been solved in the next release of the database
QL> spool testcase.log
SQL> --
SQL> connect &1/&2
Connected.
SQL> --
SQL> var schemaURL varchar2(256)
SQL> var schemaPath varchar2(256)
SQL> var resourcePath varchar2(256)
SQL> --
SQL> begin
2    :schemaURL := 'metadata.xsd';
3    :schemaPath := '/public/metadata.xsd';
4    :resourcePath := '/public/metadataTest.txt';
5 end;
6 /
PL/SQL procedure successfully completed.
SQL> call dbms_xmlSchema.deleteSchema(:schemaURL,4)
2 /
Call completed.
SQL> declare
2    res boolean;
3    xmlSchema xmlType := xmlType(
4 '<?xml version="1.0" encoding="UTF-8"?>
5 <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="qualified" attributeFormDefault="unqualified" xdb:storeVarrayAsTable="true">
6          <xs:element name="root" type="rootType" xdb:defaultTable="METADATA_TABLE"/>
7          <xs:complexType name="rootType" xdb:SQLType="METADATA_ROOT_T">
8                  <xs:sequence>
9                          <xs:element name="child" type="childType"/>
10                  </xs:sequence>
11          </xs:complexType>
12          <xs:complexType name="childType" xdb:SQLType="METADATA_CHILD_T">
13                                  <xs:sequence>
14                                          <xs:element name="Child1" type="xs:string"/>
15                                          <xs:element name="Child2" type="xs:string"/>
16                                  </xs:sequence>
17          </xs:complexType>
18 </xs:schema>
19 ');
20 begin
21    if (dbms_xdb.existsResource(:schemaPath)) then
22      dbms_xdb.deleteResource(:schemaPath);
23    end if;
24    res := dbms_xdb.createResource(:schemaPath,xmlSchema);
25 end;
26 /
PL/SQL procedure successfully completed.
SQL> begin
2    dbms_xmlschema.registerSchema
3    (
4      :schemaURL,
5      xdbURIType(:schemaPath).getClob(),
6      TRUE,TRUE,FALSE,TRUE,
7      enableHierarchy=>DBMS_XMLSCHEMA.ENABLE_HIERARCHY_RESMETADATA
8    );
9 end;
10 /
PL/SQL procedure successfully completed.
SQL> declare
2    res boolean;
3 begin
4    if dbms_xdb.existsResource(:resourcePath) then
5      dbms_xdb.deleteResource(:resourcePath,4);
6    end if;
7    res := dbms_xdb.createResource(:resourcePath,'Mary Had a Little Lamb');
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> commit
2 /
Commit complete.
SQL> select xdbUriType(:resourcePath).getClob()
2 from dual
3 /
XDBURITYPE(:RESOURCEPATH).GETCLOB()
Mary Had a Little Lamb
SQL> declare
2    resid raw(16);
3 begin
4    resid := dbms_xdb_version.makeVersioned(:resourcePath);
5 end;
6 /
PL/SQL procedure successfully completed.
SQL> commit
2 /
Commit complete.
SQL> begin
2    dbms_xdb_version.checkout(:resourcePath);
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> commit
2 /
Commit complete.
SQL> set long 10000 pages 0 lines 150
SQL> --
SQL> select r.res.getClobVal()
2    from resource_view r
3   where equals_path(res,:resourcePath) = 1
4 /
<Resource xmlns="http://xmlns.oracle.com/xdb/XDBResource.xsd" Hidden="false" Inv
alid="false" VersionID="1" ActivityID="0" Container="false" CustomRslv="false" V
ersionHistory="false" StickyRef="true">
<CreationDate>2006-06-10T05:01:25.355009</CreationDate>
<ModificationDate>2006-06-10T05:01:25.355009</ModificationDate>
<DisplayName>metadataTest.txt</DisplayName>
<Language>en-US</Language>
<CharacterSet>UTF-8</CharacterSet>
<ContentType>text/plain</ContentType>
<RefCount>1</RefCount>
<ACL>
    <acl description="Public:All privileges to PUBLIC" xmlns="http://xmlns.oracl
e.com/xdb/acl.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:sch
emaLocation="http://xmlns.oracle.com/xdb/acl.xsd                           http:
//xmlns.oracle.com/xdb/acl.xsd">
      <ace>
        <grant>true</grant>
        <principal>PUBLIC</principal>
        <privilege>
          <all/>
        </privilege>
      </ace>
    </acl>
</ACL>
<Owner>SCOTT</Owner>
<Creator>SCOTT</Creator>
<LastModifier>SCOTT</LastModifier>
<SchemaElement>http://xmlns.oracle.com/xdb/XDBSchema.xsd#binary</SchemaElement
>
<Contents>
    <text>Mary Had a Little Lamb</text>
</Contents>
<VCRUID>15DE79F263F7CC00E040578C2A0656F8</VCRUID>
</Resource>
SQL> begin
2    dbms_xdb.appendResourceMetadata(:resourcePath,xmltype(
3 '<root xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
4         xsi:noNamespaceSchemaLocation="metadata.xsd">
5      <child>
6        <Child1>AAA</Child1>
7        <Child2>BBB</Child2>
8      </child>
9 </root>'));
10 end;
11 /
PL/SQL procedure successfully completed.
SQL> commit
2 /
Commit complete.
SQL> select r.res.getClobVal()
2    from resource_view r
3   where equals_path(res,:resourcePath) = 1
4 /
<Resource xmlns="http://xmlns.oracle.com/xdb/XDBResource.xsd" Hidden="false" Inv
alid="false" VersionID="0" ActivityID="0" Container="false" CustomRslv="false" V
ersionHistory="false" StickyRef="true">
<CreationDate>2006-06-10T05:01:25.355009</CreationDate>
<ModificationDate>2006-06-10T05:01:25.558913</ModificationDate>
<DisplayName>metadataTest.txt</DisplayName>
<Language>en-US</Language>
<CharacterSet>UTF-8</CharacterSet>
<ContentType>text/plain</ContentType>
<RefCount>1</RefCount>
<ACL>
    <acl description="Public:All privileges to PUBLIC" xmlns="http://xmlns.oracl
e.com/xdb/acl.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:sch
emaLocation="http://xmlns.oracle.com/xdb/acl.xsd                           http:
//xmlns.oracle.com/xdb/acl.xsd">
      <ace>
        <grant>true</grant>
        <principal>PUBLIC</principal>
        <privilege>
          <all/>
        </privilege>
      </ace>
    </acl>
</ACL>
<Owner>SCOTT</Owner>
<Creator>SCOTT</Creator>
<LastModifier>SCOTT</LastModifier>
<SchemaElement>http://xmlns.oracle.com/xdb/XDBSchema.xsd#text</SchemaElement>
<Contents>
    <text>Mary Had a Little Lamb</text>
</Contents>
<VCRUID>15DE79F263F7CC00E040578C2A0656F8</VCRUID>
<Parents>15DE79F263F8CC00E040578C2A0656F8</Parents>
<root xmlns="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNam
espaceSchemaLocation="metadata.xsd">
    <child>
      <Child1>AAA</Child1>
      <Child2>BBB</Child2>
    </child>
</root>
</Resource>
SQL> quit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.0.0 - Alpha
With the Partitioning and Data Mining options
I've filed bug 5313655 for the 10.2.x behavoir. If this is important to you you might want to consider signing up for the forthcoming beta program for the next release of the database

Issues with Global Address Book and Out of Office saying Exchange is Offline.

So we have an Exchange 2010 server that has been running fine for quite a few years. We recently changed our firewall to an ASA 5510 and created all the firewall rules necessary to have email work through it. Everything works fine so naturally we thought
everything was good to go.
Then I started getting messages that the Out of Office wasn't working an that when users where trying to set their away message they would get a message from outlook that the exchange server was unavailable, yet when I
check the outlook client it would say Connected to Microsoft Exchange at the bottom. I thought this was crazy so I started looking further into it and it turns out that the name for the server owa.xxxxxx.net points to a public address, which of course lives
on the outside interface to the ASA. In ASA world it doesn't like private space (ie. 192.168.x.x) talking to the outside interface and drops the packets, where our old firewall did not. So as a short term fix I had the users using OWA site with a internal
address to set their out of office message. This worked fine until today when I rebooted the email server and started getting support calls saying that when users where selecting the To: button in a new email that once again they were getting messages saying
that they were not connected to exchange, yet they once again outlook said they were. I then started playing with the host name owa.xxxxxx.net again. This time I changed the hosts file on a box and pointed the internal IP of the exchange server to that
host name. Restarted the outlook client and things started to work as they should. I have played with split DNS to see if this would help so I wouldn't have to do this with every client in the network, and it was promising until I realized that we many hosts
that use this domain and an external DNS server that takes care of these requests that now the internal users will never reach. Funny part is that if we take one of our laptops out side the network everything works fine as well.
So I'm guessing that some of the processes that connect Outlook to Exchange use the FQDN of the server or IP address, and that other things such as the Global Address Book and Out of Office use the External Host Name.
Any help to point these request at the Internal FQDN/IP would be great, or if someone can think of another way of dealing with this issue would be greatly appreciated.

Hi Titan,
correct me if i have missed something but are users able to look up contacts in GAL?
If you update (ex mobile number for a user) then run the following commands(one for each line):
Get-GlobalAddressList | update-GlobalAddressList
Get-AddressList | update-AddressList
Get-OfflineAddressBook | Update-OfflineAddressBook
Restart Your Outlook in 5 min,then do a manual OAB download.Is info on that user updated?
Does GAL from frm OWA?
if im not wrong,Status and Out of Office use EWS for status update.
Please run the following command:
Get-WebServicesVirtualDirectory -Identity “mailserver01\EWS (Default Web Site)” |fl *internalUrl*
where mailserver01 is the server that is having the issue.
Then please check if internal URL is correct for that server (and those that are having issues.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

WiFi issue with MAC address

I've been using MAC filtering as part of my home network wireless security for years. This means inputting the MAC address of every device and computer that I want to have connect to my network. So I get my new WiFi + 3G iPad on May 28th and look in Settings to find the MAC address so I can input it into my router info. The router (D-Link) says that it's not a valid MAC format, presumably because it begins with E8 instead of the 00 that all my other devices have. I ended up having to disable MAC address filtering in order to have my iPad connect to my WiFi network. Does anybody have any comments or ideas about how I can get the router to recognize a MAC that begins E8:06 etc.?
Would appreciate any help. Thanks.
Glenys

I am using MAC filtering on my network using a Linksys router (WRT300N) and had no problems adding our iPad to the MAC table. Also, if I'm not mistaken, the first portion of a MAC address is unique to the manufacturer, so unless all of your wireless devices are from the same manufacturer (at least the wireless component of the device), then it isn't likely that all of your MAC addresses will start with the same digits. Make sure when you enter the MAC address that you include the colon in between each pair. My Linksys won't accept the MAC address without them. As someone else recommended, you may also want to see if there is a firmware update for your router that addresses this issue. Good Luck.

A small issue with iCloud, Address Book, and Admin accounts

Ok, I have a Macbook Pro running Lion/iCloud, and my wife has an iMac running Lion/iCloud.
I first noticed this issue when I went to Airdrop a file to her, and her picture in Airdrop turned into my picture that I have as my User account & "Me" in Address Book.
So I went to the iMac and noticed that the "Me" in Address Book was no longer my wife, but me. Not a big deal. I figure it must be the "new way" of iCloud. Whatever.
But I went to change her Admin account back to her normal picture and it worked. But then it changed back by itself. Annoying. I tried it again and it changed itself back again. So, it must be reading the default picture from Address Book/iCloud.
I guess the overall issue is that iCloud wants 1 identity for an entire family of devices. I understand this for syncing purposes, but it's annoying because my wife and I are not 1 person. She has her personality on her iMac, and I have mine on my MBP. That's why we have 2 different computers. (Steps off soap box).
I hope Apple loosens up a bit with iCloud and makes it a little more customizable.

I'm having the same frustration. Ugggh.

Smartform to PDF conversion having issue with Russian address

We are having a business situation we are the invoice in English language and the the address of ship-to party and sold-to party in Russian.
The issue we face is.
When the smartform is converted to PDF the Russian specific characters are missing in the PDF output. The same are perfect in the smart form print preview.
we are using   CONVERT_OTF function module and we are getting the Russian characters correctly in the table parameter OTF.
We are using "SX_TABLE_LINE_WIDTH_CHANGE" and " SO_DOCUMENT_SEND_API1"
function module to attach and mail the pdf.
In the PDF we are missing the Russian specific characters .
For Example in "Sedláčkova čč" the output is "Sedláčkova    " means "čč" is mising
Thanks in advance
Regards
Joby

Hi,
As described in note 999712 - PDF conversion for Unicode, there is a new unicode PDF converter PDFUC.
It depends on the SAP Version if you have to install the device type or not. You can check also via SPAD -> Full Administration -> Device Types -> Display.
You can pass the device type in the output options. I used:
SSFCTRLOP-no_dialog   = 'X'.
SSFCTRLOP-getotf      = 'X'.
SSFCTRLOP-langu       = 'EN'.
SSFCOMPOP-tdprinter = 'PDFUC'.
If you specify a device other than printer in the control options like SSFCTRLOP-device      = 'TELEFAX'., above will not work as
SSFCOMPOP-tdprinter is only evaluated for printer.
You have to check in SCOT -> Settings -> Device Types for Format Conversion.
You can make a general entry or for a specific language:
PDF                           SAPscript/Smart Forms    PDFUC
PDF    EN    English    SAPscript/Smart Forms    PDFUC
Let me know if you get this working.
Jeroen.

Making internet sharing work (Issue with Network Address Translation)

Trying to use internet sharing to enable a BluRay player to get access to the internet for firmware updates, BDLive, etc.
MacBook Pro is setup with Airport (en1) enabled and connected to the internet.
Ethernet port (en2) is set to "Configure IPv4: Off."
I have configured the /etc/bootpd.plist file with the following configuration as mentioned in http://www.macosxhints.com/article.php?story=20071223001432304&query=xbox%2B360.
<key>replythresholdseconds</key>
<integer>0</integer>
After starting up Internet Sharing, the following is observed:
Ethernet port(en2) is reporting 192.168.2.1 as its IP address in Network Utility but not in the Network System Preferences Pane.
The Mac is responding to the DHCP request from the BluRay player and the BluRay is assigned an IP address of 192.168.2.2/24 with a default gateway and DNS of 192.168.2.1.
So you think there would be success with this but wrong. The system log is reporting that NATD "failed to write packet back (No route to host)" or "failed to write packet back (Host is down) and the connection test on the BluRay player is consistently failing.
Even manually configuring the ethernet port on the Mac is resulting in failure. Is there something else I'm overlooking?
Hoping someone can spread some light on this. Thanks.

Ashy Larry wrote:
So you were able to get it to work then?
I ask because I want to get the Sony BDP-N460 Bluray player for my parents, as it's the only Sony player aside from the Playstation 3 that is Netflix capable. I'm not sure why their other wi-fi enabled player doesn't have Netflix on it. I suppose I could get them a Playstation 3, but they don't really need one.
More than likely that Sony is positioning its products that way so people do go for the PS3 and increase it install base and possibly get you to by a game or two.
I want to connect the player to an old iBook G3 that's running 10.4 and share its connection. I did this successfully with the iBook and my Xbox 360 and wanted to know if it was possible to do so with a Bluray player.
I would bet that you will be able to accomplish this if you were able to get a 360 running through it. Just ignore the Blu-Ray player's test connection tool and try to connect to Netflix. Just play it safe and buy it through a retailer like Amazon where returns are hassle free.

Issues with second router disconnecting and reconnecting

My second wireless router keeps disconnecting... it reboots then becomes availble after a minute.
The second wireless router is a Netgear WNDR3400v2 and is connected to a Actiontec MI424WR via an ethernet wire. I changed the settings as noted in a forum post to hook up a second router... the setting changes fixed the issues with IP address conflicts that I was having. The issue is that the Netgear router keeps disconnecting. The Actiontec router never disconnects.
There are 16 devices connected to the internet.
Parts of my house don't get a signal from the Actiontec router.
Please let me know if you have any suggestions on enabling more wireless coverage throughout my house from my Actiontec router and/or how to stop the Netgear router from disconnecting. I can't find any specific information that isn't confusing.
My Actiontec router is on the main floor in a cabinet, which prevents the signal from reaching to parts of the house... there is an ethernet cable that runs from the cabinet to a room upstairs, which is where the Netgear router is located... that signal reaches most of the house.

Hi Clueless777,
Most likely if your Netgear router is randomly disconnecting but the Actiontec is not, it's going to be an issue with your settings in the router. There is a post over at http://www.dslreports.com/faq/12506 that will tell you exactly how the settings should be in both routers for this to work properly.
As to increasing the signal from the Actiontec router, a couple of things come to mind but you may have already did these things. First, make sure to change the wireless channel in the Actiontec to something like 8. Also, make sure that no cordless phones are located nearby the Actiontec router as much as you can. We mention this because many cordless phones operate in the 2.4ghz range which is the range of most WiFi routers and devices. You could also look into getting a range extender but I wouldn't recommend it because your Netgear router is essentially doing the same function without sacrificing service. Other than these suggestions, take a look at the link above and make sure your settings match. That should help you out more so than changing the channel in the Actiontec router and/or relocating cordless phones.
We hope that this helps.
CJ

Issue with IP address resource

Similar Messages

Maybe you are looking for