Issue With IT0057 - Memberships fees
Hello,
Issue with
Problem Description:
Scenario is that
we need to maintain the infotype IT0057 and subtype for one pernr for particular date and
for other date the infotype and subtype should be deleted.
As we have maintained the subtype for IT0057,
in Screen modification the field is q0007-BETRG for Country Grouping 16 is hide,
When iam trying to delete an infotype along with subtype,
Iam geting the error message ,"enter Amount or Number", the infotype is not getting deleted.
Kindly help me in advance so that i will useful for me
plz do the needful
Regards
Sowmya
Hello Experts ,
Can anybody plz provide the necessary solution as running short of time or anybody can elborate how can i make changes for this.
Regards
Similar Messages
-
User is receiving message of "we are having trouble verifying your membership" and is a constant problem. Can you please assist with this? Thank you!
Hi Gabbie_rubio@dabs,
Welcome to the Adobe Forums,
This might be an issue with the Adobe ID.
You might also try :
Rename the opm.db file.
Close the Creative Cloud application if it's running.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
Rename the opm.db file to opm_old.db
Launch Creative Cloud
Refer to : http://helpx.adobe.com/creative-cloud/kb/convert-cs6-licensed-under-ccm.html#main-pars_hea der_1
Regards,
Rajshree -
Routing Issue with 3550 Switch
I am having an issue with routing with one of my Cisco 3550 switches. I know the 3550s are EoL but some of us have to work with what we have.
I am using a 3550 on either side of a Layer 2 link. The Layer 2 link is 2 Extreme Summit X-440 switches with Microwave between the switches. I have a VLAN configured on both switches and tagged on the ports connected to the Microwave. The 3550 switch on each end is configured for IP routing but I cannot pass traffic between the switches. If I unplug the switch on the local end and plug in a laptop, I can ping the switch on the remote end and access devices at the remote end.
I know this should work because I am doing the same thing over another Microwave link and Layer 2 link using another 3550 and a HP ProCurve at the remote end.
Here are the configs for each 3550:
Local end; Port Fa0/23 goes to the Remote Side. Port Fa0/24 goes to the rest of the network
Current configuration : 5417 bytes
! No configuration change since last restart
version 12.2
no service pad
service timestamps debug datetime localtime show-timezone
service timestamps log datetime localtime show-timezone
no service password-encryption
service sequence-numbers
hostname Brindley3550
enable secret 5 $1$3A.n$lzBUQg.fn4hJ7f0jEOqe71
no aaa new-model
clock timezone UTC -6
clock summer-time UTC recurring 1 Sun Apr 2:00 1 Sun Nov 2:00
mls qos map cos-dscp 0 8 16 26 32 46 48 56
mls qos min-reserve 5 170
mls qos min-reserve 6 10
mls qos min-reserve 7 65
mls qos min-reserve 8 26
mls qos
ip subnet-zero
ip routing
ip domain-name morgan911.net
ip name-server 1.2.150.11
ip name-server 1.2.150.5
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet0/1
switchport access vlan 18
switchport mode dynamic desirable
spanning-tree portfast
{Removed for Brevity}
|
interface FastEthernet0/7
switchport access vlan 13
switchport mode dynamic desirable
spanning-tree portfast
interface FastEthernet0/8
switchport access vlan 13
switchport mode dynamic desirable
spanning-tree portfast
{Removed for Brevity}
interface FastEthernet0/23
description To Gum Springs via Extreme P10
no switchport
ip address 1.2.147.1 255.255.255.252
speed 100
duplex full
interface FastEthernet0/24
description To Flint via Ceragon Eth 2
switchport trunk encapsulation dot1q
switchport mode trunk
speed 100
duplex full
mls qos trust cos
auto qos voip trust
wrr-queue bandwidth 20 1 80 1
wrr-queue min-reserve 1 5
wrr-queue min-reserve 2 6
wrr-queue min-reserve 3 7
wrr-queue min-reserve 4 8
wrr-queue cos-map 1 0 1 2 4
wrr-queue cos-map 3 3 6 7
wrr-queue cos-map 4 5
priority-queue out
spanning-tree link-type point-to-point
interface GigabitEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
interface GigabitEthernet0/2
switchport access vlan 10
switchport trunk native vlan 50
switchport mode dynamic desirable
spanning-tree portfast trunk
interface Vlan1
ip address 1.2.145.2 255.255.255.0
ip default-gateway 1.2.145.1
ip classless
ip route 0.0.0.0 0.0.0.0 1.2.145.1
ip route 1.2.165.0 255.255.255.240 1.2.147.2
ip route 1.2.166.0 255.255.255.240 1.2.147.2
ip http server
snmp-server community public RO
snmp-server community public/RO RO
snmp-server location Brindlee Mountain Tower Site
snmp-server contact Jamey Wright
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps cluster
snmp-server enable traps entity
snmp-server enable traps envmon fan shutdown supply temperature
snmp-server enable traps vtp
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps flash insertion removal
snmp-server enable traps port-security
snmp-server enable traps config
snmp-server enable traps syslog
snmp-server enable traps mac-notification
snmp-server enable traps vlan-membership
snmp-server host 1.2.150.100 public tty envmon syslog snmp
control-plane
ntp clock-period 17180143
ntp server 1.2.150.21
end
And this is the config for the remote end. Port Fa0/24 is the port for the link back to the local end.
Current configuration : 5058 bytes
version 12.2
no service pad
service timestamps debug datetime localtime show-timezone
service timestamps log datetime localtime show-timezone
no service password-encryption
service sequence-numbers
hostname GS3550
enable secret 5 $1$3A.n$lzBUQg.fn4hJ7f0jEOqe71
no aaa new-model
clock timezone UTC -6
clock summer-time UTC recurring
mls qos map cos-dscp 0 8 16 24 32 46 46 56
udld aggressive
ip subnet-zero
ip routing
ip domain-name morgan911.net
ip name-server 1.2.150.11
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet0/1
switchport access vlan 21
switchport mode dynamic desirable
spanning-tree portfast
interface FastEthernet0/2
switchport access vlan 21
switchport mode dynamic desirable
power inline delay shutdown 20 initial 300
spanning-tree portfast
{Removed for Brevity}
interface FastEthernet0/23
switchport access vlan 22
switchport trunk encapsulation dot1q
switchport mode trunk
speed 100
duplex full
spanning-tree portfast
interface FastEthernet0/24
description To Brindlee via Extreme P10
switchport mode dynamic desirable
(Is a member of VLAN 1)
speed 100
spanning-tree portfast
interface GigabitEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
interface GigabitEthernet0/2
switchport mode dynamic desirable
spanning-tree portfast
interface Vlan1
ip address 1.2.147.2 255.255.255.252
interface Vlan21
ip address 1.2.165.1 255.255.255.240
ip helper-address 1.2.150.11
ip helper-address 1.2.150.5
interface Vlan22
ip address 1.2.166.1 255.255.255.240
ip helper-address 1.2.150.5
ip helper-address 1.2.150.11
ip default-gateway 1.2.147.1
ip classless
ip route 0.0.0.0 0.0.0.0 1.2.147.1 10
ip http server
snmp-server community public RO
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps cluster
snmp-server enable traps entity
snmp-server enable traps envmon fan shutdown supply temperature
snmp-server enable traps vtp
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps flash insertion removal
snmp-server enable traps port-security
snmp-server enable traps config
snmp-server enable traps hsrp
snmp-server enable traps bridge newroot topologychange
snmp-server enable traps syslog
snmp-server enable traps mac-notification
snmp-server enable traps vlan-membership
snmp-server host 1.2.150.100 public envmon syslog snmp
control-plane
ntp clock-period 17180192
ntp server 1.2.150.21 key 0 prefer
Ideas? Anything stand out as grossly wrong? I have worked on this for 2 days and am at a loss.
Thanks
JameySorry for the delay in replying. Other items at the office took priority over this project. I tried that and no change. I pulled the switch from the remote site and took it back to the local end and connected the switches with a crossover cable and everything works fine. I have pretty much determined that it is an issue with the config in one of the Extreme switches. The config in those look pretty normal but there are a few things I am unsure of. Guess I'll see if there is a similar site for Extreme gear.
Thanks
Jamey -
Performance Issues with Photoshop CS6 64-Bit
Hello -
Issue at hand: over the course of the last few weeks, I have noticed significant issues with performance since the last update to PS CS6 via the Adobe Application Manager, ranging from unexpected shut downs to bringing my workstation to a crawl (literally, my cursor seems to crawl across my displays). I'm curious as to if anyone else is experiencing these issues, or if there is a solution I have not yet tried. Here is a list of actions that result in these performance issues - there are likely more that I have either not experienced due to my frustration, or have not documented as occuring multiple times:
Opening files - results in hanging process, takes 3-10 seconds to resolve
Pasting from clipboard - results in hanging process, takes 3-10 seconds to resolve
Saving files - takes 3-10 seconds to open the dialog, another 3-10 seconds to return to normal window (saving a compressed PNG)
Eyedropper tool - will either crash Photoshop to desktop, or take 5-15 seconds to load
Attempting to navigate any menu - will either crash Photoshop to desktop, or take 5-15 seconds to load
Attempts I've taken to resolve this matter, which have failed:
Uninstalled all fonts that I have added since the last update (this was a pain in the ***, thank you Windows explorer for being glitchy)
Uninstall application and reinstall application
Use 32-bit edition
Changing process priority to Above Normal
Confirm process affinity to all available CPU cores
Change configuration of Photoshop performance options
61% of memory is available to Photoshop to use (8969 MB)
History states: 20; Cache levels: 6; Cache tile size: 1024K
Scratch disks: active on production SSD, ~10GB space available
Dedicated graphics processor is selected (2x nVidia cards in SLI)
System Information:
Intel i7 2600K @ 3.40GHz
16GB DDR3, Dual Channel RAM
2x nVidia GeForce GTS 450 cards, 1GB each
Windows 7 Professional 64-bit
Adobe Creative Cloud
This issue is costing me time I could be working every day, and I'm about ready to begin searching for alternatives and cancel my membership if I can't get this resolved.Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3392 MHz
Built-in memory: 16350 MB
Free memory: 12070 MB
Memory available to Photoshop: 14688 MB
Memory used by Photoshop: 61 %
Image tile size: 1024K
Image cache levels: 6
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.1 CUDA 4.2.1
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 1024 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTS 450/PCIe/SSE2
Display: 2
Display Bounds: top=0, left=1920, bottom=1080, right=3840
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 3
Video Card: NVIDIA GeForce GTS 450
Driver Version: 9.18.13.1106
Driver Date: 20130118000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GTS 450
Video Card Memory: 1024 MB
Video Card Number: 2
Video Card: LogMeIn Mirror Driver
Driver Version: 7.1.542.0
Driver Date: 20060522000000.000000-000
Video Card Driver:
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: LogMeIn Mirror Driver
Video Card Memory: 0 MB
Video Card Number: 1
Video Card: NVIDIA GeForce GTS 450
Driver Version: 9.18.13.1106
Driver Date: 20130118000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTS 450
Video Card Memory: 1024 MB
Serial number: 90970233273769828003
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\ANDREW~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 111.8G, 7.68G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/09/10-12:31:21 5.0.4 79.517869
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1686
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.0.20577 2.1.0.20577
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1681
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
Required plug-ins:
3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
Angled Strokes 13.0
Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 8.1
Camera Raw Filter 8.1
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Embed Watermark 4.0
Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Extrude 13.0
FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mezzotint 13.0
Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Pinch 13.0
Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.1.2
Shear 13.0
Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Sumi-e 13.0
Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Wind 13.0
Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE -
I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?
The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
10.8 Mountain Lion is a download from the App Store, the price is $19.99.
Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
Ethernet "seizures" on MacBook Pro (coincide with IGMP membership reports)
In a nutshell, nearly every time my Mac blurps out a seemingly normal IGMP Membership Report (V1 & V2), it goes mute for anywhere from a couple of seconds to tens of seconds before returning to normal. Of course, a span of that many seconds will cause an iChat Video stream to crash and burn (as well as stall downloads, delay web page loading, etc).
During this "mute" period, the Mac quits talking to any other hosts and does not appear to hear any unicast traffic while continuing to hear (as evidenced by my packet captures) normal broadcast traffic.
I've written a more detailed description of this problem on my blog where I can provide a diagram showing the packet captures that illustrate what I'm describing:
http://www.halfpress.com/archives/2006/11/frustrating_os.html
I wouldn't normally link a post here to an outside site, but the diagram and other details are important to my description of the problem.
What I can summarize here, though, is that the problem appears to affect only my ethernet interface (not when I use AirPort) and seemed to start happening for no apparent reason earlier this week. The closest correlation with a software update or other installation was iTunes 7.0.2 some hours before first witnessing the start of the issue. I'm not saying that caused it... but it's a factor worth considering.I'd look to the router you might be using.
I was getting these same blips with a Linux-based PC running as a firewall ('smoothwall') and would drop the iChat connection audio/video/both, with precisely the same message. NoDataReceived. ([edit]changed routers, video worked again).
See if you can eliminate the router as the cause?
We can see from reading about IGMP, is that it's a "hey, are ya there?" protocol used between routers and hosts.
There are security issues.
This might be a firmware issue with your router.
Get the mac out from behind the router onto the modem itself for these tests... and see if you can videophone to mom...
Otherwise, I can't see why this is a Mac issue. (your blog is nice, though Nice pic on the arc d'triomphe. We did that OUR first jet-laggy morning in Paris, too...don't look down. -
SL Server Permission Issues with Windows XP Clients
I'm running into some permissions issues with Snow Leopard Server. I know it's specific to SL Server because I have two Leopard servers and neither one is affected. All servers are set up the same way.
I'm using this SL server as a file server in the golden triangle approach: AD for Users, OD for Groups that supply AD User membership. I have one volume per OD group, and that group has read/write privileges to that volume via the default Server Admin read/write ACL. POSIX permissions are 770 on the top level directory, and ownership is set to the AD user who owns the volume, and the OD group the volume belongs to.
The client is XP SP3. When the client accesses a share on the SL server, their access is correctly granted and they can browse the share and read any files inside the share. They can copy files to the share from wherever. They can open, edit, and save files. However, they cannot rename or delete files within the share. They cannot rename folders, but can delete them. This affects all AD users regardless of the OD group they're in.
I have a few Windows 7 and Vista clients on the network, and these two OS's are not affected by this so the problem is limited to XP. If I create a user in OD, and auth to the sever from the XP client as that user, the problem goes away, so it's something to do with AD and SMB.
I do have a ticket in with Apple support, which was escalated to Engineering. Still waiting on that.
Things I have tried that have not worked/helped:
-Modify the ACL to Full Privileges
-Tried removing/re-adding user to OD group.
-Remove darwin_streams from vfs_objects in smb.conf
stream support = no
ea support = yes/no (tried both ways)
darwin_streams:brlm = no
-Added nt acl support = no to smb.conf
per http://bit.ly/6aYycW
-Animal sacrifice..... ??
Help?I need to do more testing, but I think the fix is to add "acl check permissions = no" to the bottom of /etc/smb.conf:
; Site-specific parameters can be added below this comment.
[global]
acl check permissions = no -
Issues with Backup-GPO Scheduled Task as a non-admin account
I'm having an issue trying to get a daily backup of domain GPO's from a non-administrative account. I'm using Powershell 2.0, the Backup-GPO cmdlet runs fine as a standard user, but when I run the same cmdlet with the same user, but with a scheduled task,
the backup does not produce valid output. The command I run is:
[batch file called by scheduled task]
powershell.exe d:\loj\psps.ps1
[psps.ps1]
import-module grouppolicy
backup-gpo -all -path d:\loj
The specific problem is, all other files created by the backup are created successfully except the 'gpreport.xml' file found directly under the folder identified by the backup ID. All of the subdirectories under DomainSysvol\GPO contain xml files with the
appropriate data, and the Backup.xml and bkupInfo.xml files are also created normally. The manifest.xml file is also created normally in the root directory.
The gpreport.xml file however is malformed. It contains only two bytes of data, FF FE.
The reason this is a problem is that the xml in the gpreport file can be used to restore whether the GPO is 'enforced' and also contains link data. Using this when restoring the GPO's makes the process a lot less painful.
Running the batch file while logged in interactively as the user removes the problem, without making them an administrator.
I've been using a test domain to investigate this, I tried adding the user in question to every local group except administrators, gave it full control to the destination folder for backups, the powershell executable, batch and ps1 files. Resultant set of
policy access has been granted (rsop.msc run-as the user tested fine). The scheduled task stores credentials (needs to run when the user is not already logged in) and runs with the highest privileges.
The only possibly related error I could find in the logs was this:
This error goes away if enough group memberships are added to the account or alternatively if this string is added to the security descriptor for the LanManServer service: (A;;GA;;;S-1-5-21-1191697313-1384311512-914143962-35706), which just adds
generic all to this account by referencing the SID. However, despite the fact that the error is no longer raised, the issue with the gpreport.xml file remains.
Does anyone have any ideas on why this is happening? At this point my best guess is something UAC related, since the gpreport.xml file is created like normal if the user is made an administrator on the local machine (I'd rather not do that in production).Hi Fergubru,
Thanks for your posting.
To troubleshoot Task scheduled that a task ran, but the program that should have been executed did not run correctly.
As AZ said above, some programs require elevated privileges to run correctly. If a task is running a program that requires elevated privileges, ensure that the task runs with the highest privileges. You can set a task to run with the highest privileges
by changing the task's security options on the General tab of the Task Properties dialog box.
If a task program does not run correctly, check the history of the task for errors. For more information, see
View Task Properties and History.
For the Event ID 4656, this is an Audit log, This event will be Audit Success or Audit Failure depending on whether the user account under which the account is running has the requested permissions or not.
For more detailed information about Event ID 4656, please refer to this article:
http://www.ultimatewindowssecurity.com/securitylog/encyclopedia/event.aspx?eventid=4656
I hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Screen/Display Issues with Aperture 3.6 & iPhoto 9.6 on Yosemite
When I open Aperture or iPhoto, my screen goes all wonky. I have an early 2011 MacBook Pro with 8 GB Ram with the Intel HD Graphics 3000 512 MB. What is it doing this? How can I fix it?
Hello there, tehat17.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with the display on your MacBook Pro:
Apple computers: Troubleshooting issues with video on internal or external displays
Start with these:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
If you tried all of these steps for your display and the video issues persist, contact Apple technical supportor take your Apple computer to the nearest Apple Store or Apple Authorized Service Provider (AASP) for diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Serious Issues with Creative Zen Vision M 3
This all started when I was fast forwarding through a track and it freezes. So, I did reset and it's in recovery mode, whereas usually it will just restart again.So I tried turining it on and off and was still stuck in Recovery Mode. Tried plugging it into the computer, the computer doesn't recognize it. I did everything the website told me to, but my computer will not recognize that it is plugged into the usb. When I have it docked it will not let me do anything at all. I tried to clean it up and it stays in "scan disk" for hours,I tried to format it, knowing it would erase everything but hoping it would fix, and when I tried to format it, I got a message saying "harddisk problem", when I rebbot it simply reboots back to Recovery Mode and the other option I have is reload firmware, and it prompts me to start updating firmware, but my computer won't even recognize that it is plugged in , in the first place, so I am at a loss with what to do next. The best help Creative can give me is email support. As most of you probably have found out there is no technical support phone number, only for returns/exchanges. I am using Windows Vista if that makes a difference, which it probably does since nothing seems to work on Winows Vista, and when I look at My computer, it shows that the device is present, but yet I can't access it through any media source or when trying to install this firmware? garbage. Any help would be extremely appreciated. Thank you in advance. Sarah
That is just crazy, I am so sorry....Mine was bought just this past June, my boyfriend bought it for me because ipods seem to have really negati've reviews when it came to needing repairs and so on... It hasn't even been a year!! I pasted the st and second email below. I can't believe how frustrating this must be for you. I am still extremely annoyed though, it seems like the only option I have now is to send it in , and god knows how much it may cost to fix it. They really do have some customer service issues. They even elude that no matter if I am under warranty or not there is a possibility of "fees" ARGHHH!!!! Most recent email: Dear,Thank you for replying Creative Technical Support.From the description you provided, I can see that there is a "hard disk
error" in the screen of the ZEN Vision M and the troubleshooting steps
did not help. I apologize for the inconvenience caused. Please allow me
to help you.Based on the description of the issue that you have provided, it appears
that your product needs to be scheduled for a repair or replacement.
Please note that your product will be tested upon receipt and if no
malfunction is found in the product, it will be returned to you. Please
follow this link to have an RMA issued for your product:http://us.creative.com/onlinermaAll applicable fees will be assessed at the time that your RMA is
processed in an effort to expedite the repair or replacement of your
product.You might want to browse our online store for accessories for the Zen
Vision: M. These accessories will definitely enhance your experience,
and will allow you to get the most of your player. A leather case for
your Vision:M is a great product to protect it from scratches. http://us.creative.com/products/prod...=&product=4486If you still require assistance, please reply to this email with any
previous correspondence to ensure the quickest and most accurate
service. Thank you.Best Regards,<name removed>
Technical Support
Creative Labs Americas Original Message Follows:
------------------------ I have done all of the things you have told me to do and still no
change. I cannot get out of recovery mode....and the computer doesnt
recognize no matter where it is plugged in. It is fully charged, and that
is the one thing it will do, is charge, otherwise, when it is docked it
wont let me scroll or select any options. Thank you in advance for any
help you can give me. Is there a number I can call?
On Jan 2, 2008 2:43 AM, Creative Americas Customer Support wrote: 1st email:
Thank you for contacting us at Creative Technical Support; we appreciate
the opportunity to assist you. I understand you are having issues with your ZEN Vision:M could not be
recognized by your computer and could not get out of the recovery mode.
You had also tried formatting and updating the firmware but failed to doso. I'm sorry for the complications you are having with your player.
Also, I would like to apologize for any inconvenience this issue(s)
is/are causing you. Let me see what I can do to assist you.Prior to sending this email, our website asked you for some simple and
easy troubleshooting ste
ps.
The steps that I'll be suggesting might be
the same as what were asked previously, but these will be essential for
us to resolve your query.With regard to your issue , please try the following troubleshooting
steps which may help resolve the issue.. Check all connections to make sure that your player is securely
connected to the PC. If you have already verified your connections, you
might try using a different USB port preferably one located in the back
or a different USB Port.2. Try to access the Recovery Mode on your player and run a disk clean
up you may also try the format option. For more information on how to
access the recovery mode please visit our Knowledge Base article,Recovery Mode: What to Do and How to Access
http://us.creative.com/support/kb/ar...p?l=3&sid=47943. If you have tried all the steps above and your Zen, is still not
being recognized by the system, please refer to our Knowledge Base
articles:MP3 player not detected
http://us.creative.com/support/kb/ar...p?l=3&sid=4275USB - General Information and Essential Troubleshooting
http://us.creative.com/support/kb/ar...p?l=3&sid=2490If the player is now recognized in the Device Manager but not in the
applications including Windows Media Player, please refer to the
article.MTP players not recognized
http://us.creative.com/support/kb/ar...p?l=3&sid=00534. If you have tried all of the steps above, then you will want to go to
our extensi've Knowledge Base for further troubleshooting ste
ps.
Here is
the link: http://us.creative.com/support/kbIf you are still experiencing the issue, please respond to this thread
on the outcome of each of the troubleshooting steps suggested and on
your information on the following:. Does the player works fine by itself (boots up and plays music
normally)? If no, do you see any error messages on the player's screen?
2. Does the player works on another Windows XP (with at least Service
Pack ) computer?I apologize for the issues you are having on your player. In the
meantime, you may like to take a look at our Zen Aurvana In-Ear
earphones that is acoustically and ergonomically designed for a superiorlistening experienceThe Creative Zen Aurvana In-Ear Earphones are premium earphones that
significantly reduce up to 90% of ambient noise. Ergonomically designed,
the Zen Aurvana In-Ear Earphones completely transforms your listening
experience. Powered by efficient Balanced Armature drivers, the
earphones are acoustically tuned for exceptional audio performance.For more information regarding this great accessory for your player,
kindly check it out on our website at:
http://us.creative.com/products/prod...7&product=4702
I hope I have helped address and resolved your concerns. If in any case,
other complications occur, please do send us a reply with any previous
correspondence so we can look onto other solutions that can help solve
this case. Thank you again for contacting Creative Technical Support.Best Regards,<name removed>
Technical Support
Creative Labs AmericasOriginal Message Follows:
------------------------==================================
Subject: CLI - Technical Support Request - (ZEN Vision:M)
Self Description: Intermediate PC User
Region: Americas
Country: United States of America Support Inquiry: ID(8) My MP3 player is not detected
Product: ZEN Vision:M
CCPP Certificate Number:
Serial Number:
Purchase Date: 20/6/2007 Operating System: Windows Vista 32-bit
Creative Model Number: DVP-HD0003
Computer Brand/Model:
Processor/CPU:
Memory:
BIOS Type/Revision:
System Board/Chipset:
Detailed Problem Description:
My computer isn't recognizing the player. I can't get out of recovery
mode. When I try to format it says there is a hard disk error. When I
try to update the firmware it won't let me because it acn't detect the
product. When it reboots, it reboots to recovery mode. I can't access
the main settings or screen. When it is docked it won't let me do
anything. I tried all the suggestions on the site. The product was 50%
charged when I was doing all this. It won't let me reload firmware
either.
Moderator note: Please remove the name of the advisor before posting up e-mails received from Customer Support.Message Edited by Catherina-CL on 0-22-2008 0:59 PM -
Possible Issues with Duplicate Training Database?
Hello everyone!
First off, please forgive my ignorance! I've only been working with databases lightly over the last couple of years, and thus far only with MySQL and MS SQL.
Recently the company I work for purchased a new software package that required Oracle. We purchased a copy of Oracle 10.2 as part of the deal and the company that sold it to us, and set it up for us, has denied us dev access to the database, on our server, because it would expose their underlying data schema. I wasn't in change when the decision was made and we spent the money on a crippled copy of Oracle, but that's in the past.
Because we don't have dev access to Oracle we're unable to create a training database for this new software in house. We have to pay this company to create a test environment for us. I was told it would cost $500, until the tech said he was going to install Oracle on our training server.
At this point I stopped him and said at $500 they'll either be breaching their licensing agreement, or giving us a free copy! The other possibility is that they were going to install this and then just bill us for Oracle later on, despite quoting the job at $500.
The tech who was about to do the installation went to check with someone more senior and then returned to inform me that installing the second copy of Oracle would indeed require more licensing fees.
This verified what I already had told him, and I said we want a training database on our existing Oracle server, and then training copies of the new software can just point to that training database.
He now needs to take time with the more senior technicians while they're "analyzing the existing database server/environment". He was trying to talk me out of installing a training database on the existing server, and instead buying another copy of Oracle, which I believe to be a total cash grab. He had no solid reason why he couldn't do it, but refused to anyway and said he needs to talk to a more senior tech (the same one who said that yes, we'll need to purchase a second copy of Oracle rather than use a second database on the existing server).
So, these two databases, one live data and one a duplicate of that live data used in a training environment where changes won't be reported against, should be able to exist peacefully should they not? The same version of the same software accessing the same data from the same server, just a different database, shouldn't present any problems with my limited knowledge of Oracle! There will only ever be maybe 5 connections to the training environment at a time, and the server should be able to currently handle twice as many users connected as it's current maximum (edit: expected) load.
I know this wouldn't be a problem with MySQL, or MS SQL, and Oracle is a superior database package, so can anyone think of any legitimate reason that might back up the claim that having that duplicate database will be a problem?
Thanks in advance for any guidance here!Thank you very much John!
We have a per user license and I don't expect our training needs to exceed even a half dozen people at a time to start (A small, significant, fraction of the initial user base). In the future we can easily recommission other resources, or purchase more. The whole project is in the earlier stages anyway, so the needs are smaller now (but the money we spend on licensing could be recurring).
I understand the requirements angle from a server perspective, but those points you brought up drill down into what I need to know a bit more.
I doubt rollback segments would be necessary, I was thinking more along the lines of scheduled replication/duplication of the production database on a weekly or monthly basis, just to keep the material at least somewhat up to date.
I also don't think temporary table space would put much load on storage either, at least in the long run.
RAM isn't much an issue with a 64 bit version running either, for our needs now at least.
My instinct, and what you mention about even potential impact of altering the existing database schema enforces this, is that it's basically safer to create a separate database, but less resource intensive to alter the schema of an existing Oracle database to suit training needs (in this situation, maybe, making some vague assumptions about software probably), if done correctly (although still carrying risks).
I do wish I had the time to read up on this more now, and I will as soon as I have the time.
I probably will download 10g express edition to familiarize myself a bit more now, as soon as I come up with an application for it, to at least try out whatever I read.
Thanks for the advice -
Weird screen issues with safari
Hi, I just got a refurbished 15" macbook pro...not retina, but I believe it's a 2012 model. I'm experiencing a couple weird issues with it. So far, they seem to be exclusive to Safari, but I'm not sure yet. Haven't been able to recreate the same problems in Chrome or other programs. The problems are:
1) When filling text into a blank or box...as in a google search, or typing a facebook message, the text I am typing will often disappear or be invisible until i move the cursur to someplace else...then the text will show up. Words at a time can be invisible. Like I said, so far, I'm only noticing this in Safari, not Chrome, but I'll have to test with Chrome some more to know for sure.
2) Sometimes portion of a page will be misplaced on the screen. For example, if I'm on Safari, and reading a news story, the left side of the page will look normal, and the right side of the page will look normal, but they won't match in the middle....I'll be seeing text from the beginning of the article one the left side, but from the end on the right side as though only part of the page is able to scroll. Again, this is only in Safari so far.
Both these issues (which I assume are related) have been happening since the first day I got the computer last week and it hasn't been dropped or had anything spilled on it or anything. I'm well within the warranty period, but this problem may be hard to recreate immediately if I bring it in to a store, so I want to check here first and see if anybody has any ideas.
I'm hoping this is a simple known bug with Safari that will eventually be fixed and not a problem with my new computer. It is enough to have me second guessing my decision to go with a refurbished model, but I'm probably just paranoid. I'd appreciate any info that anyone has. Thanks!!!I could suggest a reset, but I don't believe that will do much good.
First, I would contact your local Apple Store, should you be near one, and see if the Genius Bar can solve the problem quickly.
Second, if they require repairs, you can use their expertise; or, you can use iPod Juice - a business that's more competitive. The latter is where I had my repairs done; email them for fees and services. -
Issues with Creative Cloud for teams deployment workflow
The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
[Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
It can be installed from command line by:
Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe SystemsHi Boncker,
I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
Please do let us know if that worked for you or not .
Cheers,
Kartikay Sharma -
Issue with magsafe/charging (blinks green, amber, off)
Having a quirky issue with my mid-2009 Macbook Pro.
A month or so ago, I began having an issue with my macbook charging. When the computer is up and running and I plug in the magsafe it will say "Calculating..." and then say "Not Charging" and then switch to battery use. It constantly does this as long as the magsafe is connected. The lights on the magsafe will constantly cycle from green to amber to no light.
At first, it would do it a few times then it would start charging. Now it constantly does this without ever stopping. I was editing video the other day for a while and it never stopped the cycle.
Thinking it was the battery, I took it into the Apple Store last week and got a new battery because it had been saying "Service battery" for a while and the battery would only last about 20 minutes on a charge. So I just thought the battery finally refused to charge.
But the problem still exists.
The magsafe is new (only 3 months old) and here's the quirky thing: the computer will charge if it's asleep (lid closed) or shut down completely. No blinking lights at all. It will charge as long as it's asleep or shut down. So I don't think it's the charger. But as soon as you hit the power button to starting booting up, it will blink.
I have reset the SMC a couple times actually, but no change.
Is there something software/firmware related that I haven't tried? Any insight or suggestions would be greatly appreciated before I take it back to the Apple Store (which is about an hour away).
Thanks!Try resetting the system management controller
http://support.apple.com/kb/HT3964?viewlocale=en_US
If that did nothing for you, try resetting the NVRAM
https://support.apple.com/kb/HT1379 -
Issue With Page Break When Sorting is also applied on group
Hi
I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
The following is the sample XML
<ROWSET>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Accounts</ORGANIZATION>
<FULL_NAME>test1,</FULL_NAME>
<ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
<CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
<RUN_VALUE>250</RUN_VALUE>
<MONTH_VALUE>500</MONTH_VALUE>
<QUARTER_VALUE>500</QUARTER_VALUE>
<YEAR_VALUE>500</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test2</FULL_NAME>
<ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
<CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
<RUN_VALUE>5.19</RUN_VALUE>
<MONTH_VALUE>10.38</MONTH_VALUE>
<QUARTER_VALUE>10.38</QUARTER_VALUE>
<YEAR_VALUE>10.38</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test3</FULL_NAME>
<ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>19.67</RUN_VALUE>
<MONTH_VALUE>39.34</MONTH_VALUE>
<QUARTER_VALUE>39.34</QUARTER_VALUE>
<YEAR_VALUE>39.34</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test4</FULL_NAME>
<ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>0</RUN_VALUE>
<MONTH_VALUE>360</MONTH_VALUE>
<QUARTER_VALUE>360</QUARTER_VALUE>
<YEAR_VALUE>360</YEAR_VALUE>
</ROW>
</ROWSET>
In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
kumarHi All,
I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
Can anybody throw some light on this?
FYI...
I am using this code:
?if: position() mod 6= 0?
?split-by-page-break:?
?end if?
(Of course with in tags)
in G_LINES loop.
Can anybody help me out :-(
--Saritha
Maybe you are looking for
-
Muse Crashes When I Try to Save
Hello, I've been encountering an issue when I try to save a particular muse site. I don't get this on all of my sites, just one in particular. I open this site, it asks if I want to recover changes made (it crashed previously) I say no. It opens the
-
Is there a way to copy a class object into a byte array? If so, how?
-
I'm creating a site for someone's business and they would like restricted access to 'member' content. This would then require the issuance of many userid's. Anyone know how this can be done with iWeb. I know I can create a userid for a site but don't
-
Hi all, I am currently doing a heart sound analyzer project. I acquired signal using NI USB 6008 continuosly. My program is able to saved the acquired signal into a wave file. But when I browse open the saved file, the output waveform did not look th
-
We have installed Portal Server 7.2 in solaris 10 on sparc and deployed all our portlets. After some time, when we try to access psconsole, the IE browser says 'redirecting' and waits infinitely. We cannot see the login page. Any idea how to overcome