Issue with items that really do have a 0 (zero) price.
If we have items that have a price of 0. SAP allows us to enter this in price lists but does not agree when we use this item on an order because it does not accept that the price is 0.
Please tell us what we should do. I do not like the solution of putting a price of 0.01 in because it will look messy on our invoices if we have to apply a 100% discount to put it at 0.
Hi,
What item is that in your Sales Order that has zero value?
It is recommended that you should use Free Goods Pricing for this item in your sales order as Allen have suggested.
This would solve your problem..
Thanks.
Rgds.
Similar Messages
-
I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?
I had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged.... -
Hi All,
I have an issue with item proposal. This issue is as follows:-
I created a item proposal for a sale area. I created it for around 10 items with no qty.
Now I create a sales order. When I create a sales order, i get an info message that dynamic credit check is exceeded. I just press enter and then I choose.... Edit----additional functions-propose items.. And then I give the item proposal number and click on the selection list button. The system shows me all the 10 materials with no qty. I select a material A and give the qty in the qty column of item proposal and then click on "copy" qty" button. the system copies the material to the sales order but it does not copy the qty.
Why it is not copying the qty from the item proposal to sales order for material A ?.The system is not giving any message too after copying the material to sales order (qty not copied) .There is no exlusion list maintained too for the material A and customer
I tried for other materials by giving qty in the item proposal and the system is copying the qty from item proposal to sales order.
why qty of material A is not copied to sales order.
regardsHi All,
I have an issue with item proposal. This issue is as follows:-
I created a item proposal for a sale area. I created it for around 10 items with no qty.
Now I create a sales order. When I create a sales order, i get an info message that dynamic credit check is exceeded. I just press enter and then I choose.... Edit----additional functions-propose items.. And then I give the item proposal number and click on the selection list button. The system shows me all the 10 materials with no qty. I select a material A and give the qty in the qty column of item proposal and then click on "copy" qty" button. the system copies the material to the sales order but it does not copy the qty.
Why it is not copying the qty from the item proposal to sales order for material A ?.The system is not giving any message too after copying the material to sales order (qty not copied) .There is no exlusion list maintained too for the material A and customer
I tried for other materials by giving qty in the item proposal and the system is copying the qty from item proposal to sales order.
why qty of material A is not copied to sales order.
regards -
Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.
Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.
-
Can EJB 3.0 beans be used with tables that do not have a primary key?
Can a EJB 3.0 persistence bean be used with tables that do not have a primary key defined? I am building a test application based on the HowTo - Building EJB 3.0 Faces App paper posted after Openworld (schalk). The issue I am running into when trying to run the application is: Exception Description: Entity class [class com.persistence.Rpthead] has no primary key specified. Note: I get a simular error when using toplink directly.
The tables I am binding to do not have primary keys defined. They use unique constraints to manage the table integrity.
Is it possible to use EJB 3.0 on tables without a primary key? If not, are there plans to support this in the future?The spec requires a primary key Id annotation. I will take your suggestion to EJB 3.0 expert group.
Can you also send an email to [email protected] with your requirement?
-Debu -
Revision: 4610
Author: [email protected]
Date: 2009-01-21 12:48:01 -0800 (Wed, 21 Jan 2009)
Log Message:
Commit Josh's patch for 3.x to fix bug SDK-17367 which works around an issue with Dictionary that stops ObjectUtil.toString() working with QNames.
QE: Yes, please add a test case to ObjectUtil tests for this scenario.
Doc: No
Checkintests: Pass
Bugs:
SDK-17367 ObjectUtil.toString(QName) causes RTE
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17367
http://bugs.adobe.com/jira/browse/SDK-17367
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/utils/ObjectUtil.asVPN-User,
Ok - I see the list of issues and will ensure our X300 specialist takes a look at it.
Please do understand that while you have put together a very coherent list, I try to ensure priority to threads in which multiple customers are focused on a single issue, as we deliver the most benefit to the community in working on those. This forum is primarly a peer to peer discussion forum rather than a Lenovo chat / tech support where we try to solve each and every issue put forth.
Individuals with a long list of issues on a particular machine may find benefit from either contacting technical support and working through their list, or publishing it as you have done and wait for other users of the same system to share their experiences.
Thanks for your patience
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Issues with item determination in SRVR
Folks
I am having issues with item determination in SRVR. I am trying to determine items by Multilevel categorization but it is not getting determined in SRVR.
I have done all the config settings.
Please help.
Thanks
TarangANSWERED
-
That really *****, we have 4g, but poor signal outside cities, so it drains battery in 1 day! All other phones has 2g option,maybe it is time to switch to other os!
There may be nothing wrong with the phone. If the signal in your location is weak then the fault lies with the providers of that signal. Perhaps an alternate provider would help, even if the service costs more. Ultimately, in most countries it is the government that encourages the improvement of infrastructure.
-
i have deleted items that seem to have filled my storage but it does not seem to have emptied/cleared it out. What step have I missed to clear out my icloud storage? Thank you.
How long was it in storage & what battery percentage was it originally stored with? You can kill Lithium batteries if they are not stored properly is why I ask.
-
How to find item that do not have GI for long term.
Hi MM Expert
What is the best way to identify the the items that do not have goods movement (goods issue) for long term.
I think of 1 idea using t-cd MCBE, but I would like to find out other possibility, to check more better idea.
Do you have any good idea (Which table is useful for this analysis).
Best Regards
Keiji MishimaHi Antony
Thanks for the information.
Your information is also helpful.
Best Regards
Keiji -
I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV. This feature seems to be lost in the Mountain Lion upgrade. Did Apple feel that once Mountain Lion came out that EVERYONE would have Apple TV? There are no settings in System Preferences/Display like there used to be...only for AirPlay Mirroring.
Running a cable to the HDMI port is still supported. (and still works on mine).
If the Arrangement tab in System Preferences > Displays isn't present then it doesn't recognize the physical connection. Double check all cables. If that doesn't work try a PRAM reset:
http://support.apple.com/kb/ht1379 -
Revision: 14871
Revision: 14871
Author: [email protected]
Date: 2010-03-19 01:05:54 -0700 (Fri, 19 Mar 2010)
Log Message:
Fixing anchoring 'right' and 'bottom' properties not being applied on items that don't have a width/height and position set.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/layout/LayoutRenderer.asIf you're just doing it in a back and forth or spiral fashion, you don't need to check whether a square's been filled in. You just go from a start point to an end point. Those points and the squares in between are determined by simple arithmetic.
If you're doing it randomly, I wouldn't use the GUI elements themselves. I'd have, for example, and array of booleans that tells whether each square has been filled in. -
Hi, I'm having issues with my airdrop. I have looked in my finder perfrences and didn't see the check box for airdrop. I have a macbook air running on 10.9.4 Mavericks. Does anyone know how to get my airdrop back? Thanks.
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support
-
how do you disable available downloads that keep trying to download? they are items that i already have and keep popping back up!
No one from Apple can answer this question??? Come On!!
-
Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, BelgiumHi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.
Maybe you are looking for
-
Order with referance to a contract using BAPI_SALESORDER_CREATEFROMDAT2
Hi All, I tried to create an order with reference to a sales contract . 1) I passed the contract number to the field REF_DOC at header level , But I got the error message" Document 4000003639 doesn't have document " where 4000003639 was the contra
-
When I press the home button my iPad won't go to he home page. It is as though the button isn't working properly?
-
Any one know where to dowload CS5.5 DESIGN STANDARD FULL VERSION? I have active product key.
-
Enabling comments and markups by default.
My orginization uses Adobe Distiller, watching a shared netowrk location to automatically convert .prn files to PDF. I am trying to find a way to make it to that these files BY DEFAULT have comments and markups enabled. Does anyone know how to do t
-
How well will it run on the older PowerBook G4 12" 867MHz - 640MB RAM?