Issue with LDAP Connection becuase of Network issue

Hello All,
We have some network issues going on which is causing the NIC (Network interface card) to failover to another NIC. Due to this failover SUN access manager's LDAP connection pool fills up and we see errors in logs "Directory is down". We have to restart the Access manager to resolve this issue which refresh the connection pool of LDAP.
Now we have set the setting as recommended in admin guide/tuning guide. Like
1. Set event connection idle timeout to less that firewall or loadbalancer idle timeout value.
2. event connection retry count and interval on perticular error code.
Despite of above settings its not working out. Is there other way to get all the stale connections back to the LDAP pool without restarting the server?
Or something which handles the network failover or failback?
Regards
Chetan Kulshrestha

The user search name is the value you should be looking at in the LDAP attributes, that's the one that it will send to LDAP on a logon attempt. If you changed this value after mapping a group, I'm not sure but you may have to remap the group to get the change.
So on the LDAP side verify the user search attribute = the username you expect to login with (i.e. cn, samaccountname, uid, etc)
Regards,
Tim

Similar Messages

  • Issues with WiFi connection to Deskjet 3545

    Hi,
    I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
    1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
    2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer,  so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
    3.  Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
    All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

    Hi @DmiBro,
    Welcome to the HP Forums!
    I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
    I would recommend the following guides:
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
    HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
    Tips for troubleshooting wireless connection issues
    The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
    Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
    If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
    Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
    Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
    I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
    Hope this information is helpful, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Issues with my connection when gaming (Insurgency)

    Hello,
    I just bought the MSI GT72 2QE. I am very pleased with de specs like the Geforce GTX 980m and the i4710hq but there is an issue that is bothering me some days now. When i am playing my beloved game Insurgency, i get ping spikes all the time. So i followed up some instruction on uninstalling the Killer software suite and just installing the drivers when i encountered the next problem. My Killer Wireless-n/a/ac 1525 Wireless Network Adapter couldn't find the drivers in the 'drivers only' package. But i did my best to find other drivers and accomplished after 5 hours full of frustration. So that is done but still doesn't solve my problem.
    I don't know what to do anymore and I'm starting to think that maybe my Killer Wireless-n/a/ac 1525 Wireless Network Adapter is the issue. Maybe this is a hardware issue. I contacted the store where i bought it and they will contact me in 48 hours with a possible solution but the guy said that after all my effort it seems like a hardware issue indeed. You guys are my last hope or my laptop will be gone for 3 weeks at the factory.
    Video of ping:
    nl.tinypic.com/r/ztisd1/8
    I hope someone has the solution.
    Excuse me for my incorrect English, it's not my native language.
    Bye!

    Thanks for your reply.
    I'm glad (and I'm not glad for the others..) that I'm not the only one. But it's not because there are more devices connected to my router because I am the only one now and I'm still having this problem while my other laptop doesn't have any problems at all. I've tried everything so far now. Resetting my router, restarting my router, reinstalled windows, reinstalled drivers, got rid of the software suite, turned off firewalls, virusscanners etc. Everything.
    I thought it was only with Insurgency but it's also bugging me with Battlefield 4.
    So i have tried and done everything i could find on every forum on the internet. Still I don't get the download/upload/connection I am used to when using wireless. When i am in my room, which is 10m away from the wireless router, my download speed is max 1200 kb/s where I would easily get 2300 kb/s. Also when playing online games I am having big issues with my latency/ping. It goes from 60 to 200 to 400 and back every 15/20 seconds. I also own a Asus laptop and I don't have any issues at all with the wireless connection. When I am in my room there are no problems at all. I am starting to think that the Killer Wireless adapter is just a f*cked up thing. I bought a laptop (GT72 with 980m) for €2300 but I am having all these issues with the connection. It makes me really frustrated.
    Longer vid of ingame netgraph:
    nl.tinypic.com/r/97mjae/8
    I am hoping that there is something that solves my issues. I'm starting to think that another wireless network adapter from another brand is the only option. Is there an option to change the wireless network adapter on my laptop because I will if I can. This piece of sh*t needs to be replaced.
    Bye

  • TS1398 After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise. Thank you.

    After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
    It works fine in LTE network. The problem is with WIFI only.
    Thank you.

    Hey Siddh.s!
    Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Issues with ODI connection to Hyperion Financial Management

    Hi,
    I am having some issues with ODI connection to Hyperion Financial Management. ODI and Financial management are setup on different machines.
    The ‘Cluster(Data Server)’ name in Topology is given as ‘hfm03cl’. On reverse-engineering a model it gives the following error:
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 38, in ?
    com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [HFM1] on [hfm03cl] using user-name [admin].
    at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
    When HFM is installed on the same machine, it works fine. How does ODI identify a cluster on a different machine? Do I have to give the machine name along with the cluster name? If so, what is the format?
    Thanks,
    Su

    You will need to have the HFM client installed on any machine that will be running ODI (i.e. Designer or Agent) that will be executing connections to an HFM server.
    Once you have the HFM client installed, see if you can actually connect to HFM from that machine using the HFM client.
    Couple of other thing, in the Physical Schema, have you set the Application Catalog and Work Catalog to the same HFM application?
    Also, when you are reversing, are you using the local agent or one you have installed using agentservice?
    geeo

  • Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

    Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

    That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
    Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
    These little tweaks are the only thing I HATE about upgrading my OS.

  • I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
    What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

  • Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

    Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
    Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

    Lindsay,
    Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
    Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
    It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
    I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
    Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

  • Network issue with initial connections on Hyper-V

    This is the opposite of all the other networking issues I have seen with Hyper-V- anyone run into this?
    I am running Hyper-V on a Server Core installation, and have had the same issue when I used Server 2012R2 as when I used Server 2008R2 on the same server as a virtual host. The server is an HP ProLiant DL360 Gen8 with 2x 8-core processors, 32 GB RAM. The
    VM is sized and configured to stay within 1 NUMA node. It uses a single port of the 4-port HP/Broadcom 331 NIC, with all the TCP LSO settings disable at the switch, host, and guest, same with the power management settings. We have ProxyARP on the network,
    so I have set the ArpRetryCount key to 0.
    I have seen it happening with and without SR-IOV enabled. The guest OS is an RDS server, so for the sake of our CAL's it has to stay at Server 2008R2. I have set up a HOSTS file to mitigate this problem, as it seems to be a DNS issue- Here's what happens:
    The first time I visit a resource, the server will timeout. An example not in our HOSTS file does this consistently: If I go to https://mail.mydomain.com/OutlookWebAccess, it spins for a couple of minutes before timing out. I hit refresh and the page loads
    immediately. This server is colocated in-house, as is the mailserver. I'd say it is a DNS issue at some level, but I'd like to know what level it is- Is it just timing out trying to cache the DNS request, or is there a performance issue with a DNS server on
    the network? (All of our DNS is AD-integrated running on DC's).
    Here is where I'm seeing this:
    Internet Explorer- described above
    Salient Interactive Miner- at the login screen, it searches for a database and times out. If I go to the setup and enter the IP address, it still times out. It will not find the database server until I quit and restart the program. If this is the same issue,
    it would obviously not be a DNS problem.
    I DON'T see it in GP9 connecting to a datasource
    Prior to setting up the HOSTS file, I saw this in Windows Explorer connecting to network shares on the same LAN segment.
    This appears to only happen to the Hyper-V guest OS. As a best practice, whenever Windows Update runs, I update the Integration Components.
    I have the bindings properly ordered on the guest VM, with the network adapter the goes to the physical NIC first, and IPv4 ordered before IPv6.
    All updates are isntalled, and the firmware is at it's latest revision.
    Any ideas?

    Hi Daniel,
    " This appears to only happen to the Hyper-V guest OS. "
    Do you mean that any other hosts can access the network resource normally  except these VMs ?
    If yes , my suggestion is to disable the VMQ on the physical NIC  for the VMs , then try test again .
    Best Regards
    Elton Ji
    If it is not the answer please unmark it to continue
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Issues with WIFI-connection in the Spotify app

    I have a very annoying problem with my Nokia 5800 XM and the Spotify-app. I updated the app to v. 0.4.3.9 yesterday and it required that I uninstalled the old version first, i.e deleting all my cached tracks. Now today when I'm going to resync (on WLAN, since it's about 500 tracks) it just won't connect. I choose the correct WLAN from the list, but the app continues being blue (not green) and then the list pops up again. I read another discussion about almost the same thing a moment ago, so I tried to go to the menu and check the WLAN connection from its menu. So I did that, and it says my WLAN has full signal strength (I'm right next to the router) but then it loses the connection and asks me again which network I want to use. I have not had any issues with WLAN in any other app, and I have synced tracks with Spotify on my WLAN before, so I have no idea where the problem lies. Maybe something with the update and my WLAN? I don't know...
    About the attachments: The list that shows several times and then the WLAN list where I'm connected to my network and it has full strength. "Marsvinsfarmen" is my network.
    I'm thankful for answer, I use Spotify every day!
    Solved!
    Go to Solution.
    Attachments:
    Scr000012.jpg ‏51 KB
    Scr000013.jpg ‏54 KB
    Scr000014.jpg ‏50 KB

    Okay everyone! I struggled with this problem for a long time, and I was just about to send a complaint to Spotify when it worked for me! See, I did a little different than before; this is the list I was going to file:
    "1. I open Spotify from the application menu.
    2. I choose "Online" mode.
    3. My phone asks me how I want to connect to the Internet.
    4. I pick "Easy WiFi".
    5. I choose my WiFi network from the list.
    6. Application seems to be signing me in.
    7. My phone asks me again how I want to connect to the Internet.
    8. I repeat the procedure. Spotify can't connect with WiFi.
     -I have tried to connect using other WiFi networks, didn't work.
     -Before I updated last time I could connect without problem.
     -I can connect using 3G.
     -I can connect using WiFi in other applications than Spotify, for example Opera Mobile and the native browser.
     -I have reinstalled the application without difference."
    However, I did it a little different, which made it work: instead of choosing "Easy WiFi", I choose my network directly from the list: see attachment. I never thought of that I could do so and I can't remember I did that before the update either. I have now synced my tracks and the app seems to be a little buggy, I still hope for an update, though it now works at least. Sometimes it crashes.
    Please, tell me about if this worked for you and if you have other, better solutions. This isn't good enough, I still seek a better way.
    /L
    Attachments:
    Scr000020.jpg ‏53 KB

  • IPhone 6/iOS 8 email issues with wifi connection

    Hi
    I have just upgraded from an iPhone 4 (iOS 7) to an iPhone 6 (iOS 8) and am having an issue with my pop email account. I used my iPhone 4 backup to set up new iPhone, so all the settings were as they were in my old phone. I have two email accounts, one is an IMAP account and the other is a POP account (which is my main email), I have no problems connecting to the server and downloading emails when connected via 4G (its super fast), but when I am connected via wifi, the POP account takes ages to connect to the server and check for emails (stuck on checking for email). I can speed up the process by closing mail app completely and reopening, then it checks and downloads really quickly (IMAP account has no problems), but this is frankly a pain.
    I have spent ages on the phone with Apple support, who have got me to delete my POP email account twice, reset network settings, reset the phone using on/off button and home button, all to no avail. They are intent on telling me it's my email service providers fault, but as I pointed out there is no issue on 4G and my old iPhone (using iOS 7) on wifi has no issues, so can't be email provider. I have also tried using Apple's wifi in store to rule out router issue and the problem happened there too.
    Have now run out of suggestions and options. I'm not sure if it's the phone itself, either a hardware or software issue (Apple support think not). Someone told me that it could be the wifi on my phone blocking the connection to the server. I have an appointment booked at the genius brand they have suggested wiping the phone and setting up as a new phone to see if the problem occurs, but this seems a bit drastic and I would lose all messages etc. Any help would be appreciated.

    I have solved the issue! I tried my pop account on other devices with iOS 8 and the same thing happened, so I deduced that the issue is a glitch in iOS 8 with wifi and pop accounts. I managed to get hold of the IMAP settings for my email provider and all seems to be well. Happy days!

  • Iphone 5 issues with wifi connection

    Hope someone can help.  in the past few days my iphone 5 cannot or will not connect to the wifi network in my home.  It will connect if in close proximity to the home hub.
    Hub security been checked and all ok
    My phon has worked fine with wifi until then, and no issues.
    Two other iphone 5's in the house and they have no issue and connect without issue
    Can anyone help
    Regards
    Atomictnt

    Try resetting your network settings, go to settings>general>reset then tap reset network settings, then restart your iPhone by holding down the on/off and the home buttons until you see the Apple logo. 
    If you are still having problems try restarting your router. 

  • Iphone 4S issues with wifi connection related to 8.2?

    I haven't had issues with this before and have had my phone for 4 months.  Suddenly this morning I was alerted I am almost at my data limit and I still have 14 days to go!  I noticed my phone wasn't connected to my home wifi!  I tried to connect several times and it told me the password was wrong.  I know it was right so I restarted my phone, router, and modem.  I was able to connect but had to leave for work.  When I got to work, I connected to the wifi as well in an attempt to not go over my data.  My phone connects, then I look at it a while later, and it says 3G again.  I googled the issue and found a lot of people talking about the same problem but it all seems to be from last year.  Anyone else having this problem suddenly?  I have Sprint.   

    Hello Elita One,
    Thanks for using Apple Support Communities.
    To start troubleshooting this issue where your iPhone is dropping different Wi-Fi networks after being connected, I'd like you to please reset your network settings by following the directions outlined below.
    Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    Have a good one,
    Alex H.

  • Iphone issues with wifi connection?

    while connected to my home network internet connection does not work properly.
    Most of the time safari will work fine, although sometimes it can say can't connect... but the most annoying of all is that itunes almost ALWAYS gets the "cannot connect to itunes store" error. it will often work ok when i first load it, and then if i click say the updates or seach buttons it will try to load and then fail, or if i try to install an app it keeps saying "cant connect" with the option to retry.. if i retry 10-15 times eventually it might work..
    my home network is fine. i have a few laptops that connect to it, and other iphones that connect to my network experience the same problems.
    my router is a billion 7500G

    i gave it a go last nite, same problem.
    this morning i opened the appstore while connected to wifi (with bluetooth on).. and mind you i was probably sitting about 6 metres from the router through a wall so my connection should have been perfect
    as i opened the appstore it loaded fine. i click "updates" i get the dreaded "cannot connect to itunes" message. after trying a couple of times i get the page to load eventuall, and when i try to instal an app update, i get the same message with the "retry option". after retrying 5-6 times i couldnt be bothered anymore and gave up.
    i should also point out that my internet connection is fine.. adsl2+, which is pretty much as good as it gets here in australia.
    to me it seems to be some ort of issue between my billion router and the iphone, being incompatible in some way, whether its configuration or not..
    on another forum somebody suggested a while ago that i try to set a static ip for the phone.. did that to no avail..

  • Anyone else having an issue with TCP connections using iCloud for Windows?

    Hi,
    Before I asked this question, I did wait to see if any related questions came up, but none did, so I submit it now.
    On my admittedly older laptop running Windows 7 64b Home, I've run into difficulties with the iCloud for Windows app to the extent that I had to uninstall it.
    It would that, as my laptop was running, in the background, iCloudServices.exe would endlessly iterate TCP connections, which, while not actively sending or receiving any data, after some hours would number over 100 instances, taking up resources, and grinding my laptop's WiFi connection to a grindingly slow pace. I ended up, within the app, turning off everything, iCloud Drive and Photos, (I never used bookmarks), but still this would continue to occur.
    I contacted Apple Support, explaining what was going on, and they stated they only dealt with IOS and gave me a Microsoft Support number. When I called Microsoft support, I came more and more to the realization that the issue was specifically with the iCloud for Windows app, as that was the only software that was endlessly creating and not closing TCP connections as it was. How was Microsoft supposed to solve an issue with Apple code?
    So I called Apple back, whereupon they insisted it was a Microsoft issue. I explained other cloud services installed on the same computer were not having the same issue, it was unique to ICloudServices.exe. They stated they only dealt with IOS. I stated I purchased an iPad Air less than 7 months ago, and was trying to run iCloud in support of that.  They again stated they only dealt with IOS, and suggested I again try Microsoft. I asked them if it was reasonable to expect Microsoft to solve issues with Apple code? They said regardless, there was zero support offered for anything having to do with Windows, and all I could do was uninstall the app, which I did, though that did not feel very satisfactory to me. My thinking is, if Apple writes a Windows app in support of their hardware, they should offer support for it.
    Anyway, I was just wondering, is this an issue unique to me? or have others experienced a similar issue? I found this issue by opening the Windows Resource Monitor, looking under the Networking tab, and scrolling through the TCP Connections section to find 100+ concurrent iCloudServices.exe instances listed, whereas even Chrome, with multiple tabs and extensions, topped out at around 20.
    My one month old Desktop, DYI, sports a solid Asus 1150 MoBo, i7-4790k cpu, 16GB Ram, and an EVGA GTX 970 video card. I list some specs only to illustrate this computer has no hardware issues in comparison to my long in tooth laptop. On this desktop, running Win 8.1 Pro 64b,  at least as many, identifiably Apple, background service TCP connections are created even compared to Chrome, regardless of many tabs being open, many extensions, and even some related apps. Adobe does not even come close, though I run the full CC subscription. On this new computer, running Windows 8.1 Pro 64b, there are currently over 50 TCP connections and loopbacks that do not identify themselves, with just a - for the Image, and PID. With the experience on my laptop, I wonder how many of these are generated by Apple software, if not specifically iCloud software?
    The frustrating aspect of these connections is they seem in no way active, While the Chrome and Adobe connections can be seen to be transferring data, as long as I am not running iTunes, or so have my iPad actually plugged in, it seems 99% of the time these iCloudServices.exe connections are just taking up ports, neither sending nor receiving any data discernable to me under the Processes with Network Activity, or Network Activity lists, both displayed in the same window as the TCP Connections in the Windows Resource Monitor.
    Though I am fairly ignorant as regards coding, it seems as if there is no call to close a connection, very specifically, iCloudServices.exe, when it is no longer needed, and the next time a connection is needed, a new one is opened, rather than accessing the one previously opened. The only other reason I could imagine this might be occurring is if my Norton Internet Security software might mask and/or block the port after a certain time of inactivity.
    Anyone out there have any ideas or advice about this? Thanks in advance.

    Thanks jared,
    I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
    So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
    Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
    For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

Maybe you are looking for

  • Ole Word Automation, Remove Table Borders

    Hi All, I have created a new word document with a table of 3 rows and 3 columns using the ole. I want to remove vertical lines. The borders property enable only shows or disables the borders. I want to remove any border I want. I recorded a macro at

  • Method for Date Stamping

    Hi, I know Keynote does not have the ability to date stamp its slides. However, if you wish to do this, simply insert a table and place a custom function within a cell. The function to use is =TODAY() This auto-updates as the date changes. Hopefully,

  • ITunes download incorrect.

    Can I get reimbursed for an unintended iTunes download?

  • IGS in BI 7.0

    Must I use the IGS inside UNIX in BI version 7.0 or can we have a standalone IGS in Windows?

  • Installation Error J2sdk1.4.1 version on Window NT- Please Help

    I downloaded J2SDK1.4.1 version sucessfully on window NT, When I click on Install, I get the following error "The contents of this file cannot be unpacked. The executable your are attempting to run is corrupted. Please obtain another copy of the file