Issue with load from livecache

Dear all
In our APO system we have encountered a strange issue with data loaded from livecache into the infocube.
Problem is in the infocube, where there are two requests with a forecast version data with the same amount of data.
When I look in my infocube in APO I see e.g. the two following request IDs for a given product:
REQU_4CZ4SQ5PSM9V5PHJCHTIS24GK is the most recent load from Livecache (replacing any previous livecache loads).
APO_R43U3KZLM0V3WVK112YEK3KKLE cannot be located. It is not available on the infocube manage section
Ultimately this results in double data for this given product.
Do any of you have an idea as to what this APO_* request could be triggered from?
This is the input from the BW-team:
This indicates that an APO program has modified the infocube data without updating the request tab of the manage infocube. But it has updated the request id of the data which is transformed. With subsequent loads into the infocube, these records are split based on different request idu2019s, and loaded collectively into BI.
I hope you can help me out.
Best regards,
Anders Thinggaard

Hi Visu
It seems I made a typing error in my description of the problem. It is of course the DESTINATION combination, not the SOURCE combination, that is written into the infocube when realigning on the infocube.
This, of course, creates the request ID starting with APO. Besides that I get the request starting with REQU when I load from livecache using an infopackage. So far so good.
What confuses me though is that when I load back into livecache (load my planning area) is seems to pick up the correct amount of data (not taking the APO* request into account) whereas my load to my external BW out of my APO infocube seems to pick up both the REQU* and the APO* requests, resulting in dublicate data.
Have you had this challenge as well?
My first idea is to make the BW team make some ABAP coding leaving out any request ID starting with APO*. However it seems to me that this is a stardard functionality of APO, and I'd like to get to the bottom of this...
Best regards,
Anders
P.S. As I understand, the copy logic only dertermines whether data from source combination is added to or overwriting the data for the destination combination.

Similar Messages

Issues with load from Excel

Dear all,
I have issues with loading the data from excel.
My excel file looks like this:
Time
Store
Neto_prodaja_ACT
Neto_prodaja_TAR
Jan-12
C1
16
16
Feb-12
C1
2
2
Jan-12
C2
1
1
Feb-12
C2
3
3
My procedure for load is:
CLEAR STATUS
Across Var Down Time, Store
Sel Neto_prodaja_ACT, Neto_prodaja_TAR
Sel Store Input
access lslink
     connect test1
     select * from my_list
     peek only 10
     read
end
When I load the data I receive following error:
      Time                         Store Neto_prodaja_ACT Neto_prodaja_TAR
    1 01/01/2012                   C1 16.00             16.00
    2 02/01/2012                   C1 2.00              2.00
    3 01/01/2012                   C2                                                                                                                                                                                                                                                                       1.00              1.00
    4 02/01/2012                   C2 3.00              3.00
4 Record(s) Read, 0 Record(s) Skipped.
DAT096:
Unexpected Dimensions in ACROSS/DOWN List For Variable NETO_PRODAJA_ACT
DAT096:
Unexpected Dimensions in ACROSS/DOWN List For Variable NETO_PRODAJA_TAR
The loaded data looks like this:
The data for store C2 is loaded also on store C1 so everything is messed up.
I also have a question regarding dimensions. I have a model in PAS which has data from different data sources (BW and excel). In excel I have dimensions which are not loaded from BW (they don't exist there). How to create such dimenison?
Thank you a lot in advance.
Best regards,
Petra

Petra,
The Forum isn't really designed as a training system but rather where people can share questions or get a separate pair of eyes to look afresh at issues that aren't working for some reason. This is particularly the case for something which is as important as creating dimensions.
The idea of the SSM Cube Builder/Model Designer was to enable people to build models with their relevant dimensions and metrics for demos and simple initial systems using manual data entry. If you are getting into building dimensions that will be outside BW then you are moving into the implementation arena rather than demo creation and need to work carefully so that things tie up.
I doubt people would expect to be able to set up/implement BW without training and SSM is the same.
If you would like training or would like to collaborate on a first project to enable skills transfer then my colleague Pedro and I would be happy to discuss this. We have done this with other people and it has worked well.
Regards
Colin

Issues with importing from excel

I have been running into a several issues with importing from Excel.
First my configuration
I am running SQL Developer ver 1.5.5 Build MAIN-5969
I am on a Windows XP Professional Version 2002 with Service Pack 3
I am importing into an Oracle 10g database.
1. SQL Developer doesn't work on Excel 2007, I have to save all my files into Excel 97-2003 format before I can use them.
2. If I run into an error loading and stop the process, SQL Developer doesn't release the Excel file and I get a sharing violation if I try to save the spreadsheet without closing SQL Developer.
3. I have found that I have to set print area to the area I want to work with, otherwise the import wizard tries to keep adding rows.
4. When using the Import wizard, it keeps adding commas on fields with numerics unless I specify the column in excel as text. Currently the column is formatted as General in the spreadsheet or I can change the wizard format to say the column is an integer, but it actually is just a code field with numeric characters so it may have leading zeroes that I need to keep.
This might be related,
I have a column in excel defined as text but only contains numerics. It is of length 4, but the wizard sets a precision of 5 with a datatype of VARCHAR2. If I try to change it to 4, I get an error saying the field is not large enough. Yet, when I do a LEN on the column, it only gives me a 4. I have other fields in the same sheet that a 3 position numeric and 2 position numeric and those are fine. I am thinking this is related to the comma being inserted in a numeric field for anything greater than 3 positions.
5. Importing excel dates to oracle dates doesn't work. I have to convert the excel date column to text then import as a VARCHAR, then convert to Date once in the database.
6. The default of nullible is not set on any columns and I have to set them before the import. (I would prefer it set to nullible and I have to uncheck the box to make it not nullible. I would prefer to import all of the data and then deal with the nulls after they have been pulled in)
7. When I select header columns included it uses that as the column names. Is it possible to do the name length check then? It has bit me a few times where I try to import and forget to check the name length and then I get an error when I start running the import.
8. If one of the columns to import has all nulls, then the precision comes out to 0 and if it isn't changed an error occurs on import. Could this situation default to a precision of 1?
9. It would be nice if there was a completion message displayed and a cancel option while running.

On point 3.
I have a column in excel that consists of numbers. 4 digit numeric codes. Ex, 1111, 2345, etc
The column's format is general. It displays as just 4 numbers.
When I start the wizard initially, the column appears with data as 1,111, 2,345, etc, on the Data Preview screen.
It determines the precision to be 5 on the column definition screen.
If I change the precision to 4 then continue, that field will error out when I verify with "not big enough to hold the data in source columns"
If, I change the excel column to a TEXT column.
Excel still displays as 1111, 2345, etc
The wizard then displays the same data 1111, 2345 on the Data Previeiw screen
Yet, when I get to the column definition screen it still sizes it as a 5
If I change it to a 4, I get the same error when verifying.
If I leave them alone as 5, then it processes just fine.

Performance issue with loading Proclarity Main Page..

Hi All,
I have Proclarity 6.3 installed on a Windows 2008 R2 OS. The Proclarity Reports was working well until last week. From last few days I am seeing a slow response time in loading the Proclarity Main page.
Loading Proclarity Main page on Internet Explorer 8 is taking 150 seconds and the same Proclarity Main page is loading on Google Chrome in 30 seconds.
Have any of you faced similar issue ?
Already below things explored
1. Clear Cache on PAS Tool
2. Event Viewer, Noticed if there is any error or warning
3. Tried browsing the Proclarity URL from server itself ( still the performance is slow)
4. Memory consumption validated on server side. MSSQLServer was consuming more space. Hence restarted /. After restart also same issue ( with loading main page in IE ONLY)
5. Checked drive space .. All drives has minimum 1.5 GB of free space
6. Cleared up Proclarity Event Logs
The issue is NOT ONLY with loading Main page.. Navigating to any further web pages in Proclarity STANDARD and PROFESSIONAL version is responding VERY slowly.
The only other option, that I am thinking now is RESTARTING THE WINDOWS SERVER. Which may not be a easy deal SINCE ITS A PRODUCTION SERVER.
But the loading of web page on Chrome is 30 seconds and on IE its 150 seconds ( i.e, 5 times more..) .. So does proposing to restart the server makes sense ?
Any help, suggestion , thoughts on what I am facing.. ? Thanks
Regards,
Aravind

onInputProcessing for two pages
DATA: event TYPE REF TO if_htmlb_data.
event = cl_htmlb_manager=>get_event_ex( request ).
IF event IS NOT INITIAL AND event->event_name = 'button'.
 navigation->goto_page( event->event_server_name ).
ENDIF.
page1.htm
<%@page language="abap" otrTrim="true"%>
<%@extension name="htmlb" prefix="htmlb"%>
<htmlb:content design="design2003">
 <htmlb:page>
 <htmlb:form>
 <htmlb:button text = "next"
 design = "NEXT"
 onClick = "page2.htm" />
 </htmlb:form>
 </htmlb:page>
</htmlb:content>
page 2
<%@page language="abap" otrTrim="true"%>
<%@extension name="htmlb" prefix="htmlb"%>
<htmlb:content design="design2003">
 <htmlb:page>
 <htmlb:form>
 <htmlb:button text = "Page 1"
 design = "PREVIOUS"
 onClick = "page1.htm" />
 </htmlb:form>
 </htmlb:page>
</htmlb:content>
above will work fine.
another way :
you can define a global variable in your application class and subsquently change its value according to your requirement as the name of the page
and whenever you want to move to some page. jaust assign on onclick event of the button:
navigation->goto_page(global_variable);
where global variable is the variable you have defined.
hope this works for you.
if not reply
regards,
Hemendra

Issues with loads

There has been issues with loads to a Sales cube. The issue is that delta loads for the first few days in January have been lost (also deleted from PSA). I wanted to check the following before I make a suggestion:
1. Data up until the end of last year is available and okay
2. Create a copy of the original Sales cube
3. Generate a DataSource from the original cube
4. Load up until the end of last year to the new cube via the Datamart
5. Load from Sales LO extractors, carrying out the init from the beginning of this year to 9999 into the new copy
6. Load Deltas into the new copy
Thanks

Hi,
I hope You had taken no restriction on the date when you were doing delta init.thats why you are getting delta for all records.It would continue in futue also.
We can easily find out the sales document number which was created somewhere in December ending( Iam not saying the document should be last document of the December). Use that documetn number to fil the setup table as starting document number.
Now do selective deletion of the data from the cube which has Calnder day >= 01.01.2007. Now Do repair request with selection on calender day(or the field which is used to map to Calnder day) with the range 01.01.2007,12.12.9999 .
Next time when you are doing delta load to the cube, it will bring the records as nothng was happend.
Ofcourse as Roberto mentioned ,it is possible only in a specific case: if you are sure that a every sales document created before 31/12/06 cannot change anymore after that date !
What ever the date you feel comfotable (i.e you feel that the records which were created before that date were not changed in after Jan 01) instead of 01.01.2007 in the above explanations.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Issues with loading master data and hierarchy from BI InfoObject

Hi,
I was successful with loading the master data from BI InfoObject. It copies the text node as well but it discards the space I have in the technical name when it copies it to BPC. For example if my Text Node technical ID is "NODE 1" it copies it as "NODE1" on BPC side because of which my hierarchy load fails as it is not able to find "NODE 1".
What is the reason it deletes the space from technical ID? and how can I resolve this issue?
Do we have a provision to write a ABAP exit where I can check?
(PS: If i manuallay enter space on my BPC dimension the hierarchy loads successfully)
Thanks in advance,
Diksha.

Hi,
You can check this in start routine which can be called from Transformation file using BADI.
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/28/b66863b41f47589b9943f80b63def6/content.htm
Hope this helps...
regards,
Raju

Issues with Loading Images from a Jar File

This code snippet basically loops through a jar of gifs and loads them into a hashmap to be used later. The images all load into the HashMap just fine, I tested and made sure their widths and heights were changing as well as the buffer size from gif to gif. The problem comes in when some of the images are loaded to be painted they are incomplete it looks as though part of the image came through but not all of it, while other images look just fine. The old way in which we loaded the graphics didn't involve getting them from a jar file. My question is, is this a common problem with loading images from a jar from an applet? For a while I had tried to approach the problem by getting the URL of the image in a jar and passing that into the toolkit and creating the image that way, I was unsuccessful in getting that to work.
//app is the Japplet
MediaTracker tracker = new MediaTracker(app);
//jf represents the jar file obj, enum for looping through jar entries
Enumeration e = jf.entries();
Toolkit toolkit = Toolkit.getDefaultToolkit();
//buffer for reading image stream
byte buffer [];
while(e.hasMoreElements())
fileName = e.nextElement().toString();
InputStream inputstream = jf.getInputStream(jf.getEntry(fileName));
buffer = new byte[inputstream.available()];
inputstream.read(buffer);
currentIm = toolkit.createImage(buffer);
tracker.addImage(currentIm, 0);
tracker.waitForAll();
images.put(fileName.substring(0, fileName.indexOf(".")), currentIm);
} //while
}//try
catch(Exception e)
e.printStackTrace();
}

compressed files are not the problem. It is just the problem of the read not returning all the bytes. Here is a working implementation:
InputStream is = jar.getInputStream(entry);
ByteArrayOutputStream os = new ByteArrayOutputStream(1024);
try{
byte[] buf = new byte[1024];
int read;
while((read = is.read(buf)) > 0) {
os.write(buf, 0, read);
catch(Exception e){
e.printStackTrace();
return null;
image = Toolkit.getDefaultToolkit().createImage(os.toByteArray());
This works but I think you end up opening the jar a second time and downloading it from the server again. Another way of getting the images is using the class loader:
InputStream is = MyApplet.class.getResourceAsStream(strImageName);
In this case, the image file needs to be at the same level than MyApplet.class but you don't get the benefit of enumerating of the images available in the jar.

Issues with loading some webpages and dropbox. OS X Yosemite Wifi

I am experiencing issues with my imac. As I was browsing Chrome this morning I went to load a page and suddenly it would not load and gave a page cannot be displayed error. Since then I'm having issues.
My wifi says it's connected and everything is working fine. I can load some pages but not others (this is across all browsers I've tried: Chrome, Firefox, Safari). My dropbox desktop client will not load, nor can I load my dropbox account online. Also when I quit dropbox from the menu tray and try and reopen from applications it does nothing.
My Google Drive desktop client and my google drive online is working perfectly though..
I have shutdown and restarted my computer. I have also reset the modem. Nothing changed unfortunately though.
I updated to OS X version 10.10.1 3 days ago. So maybe the update is partly responsible?
Any ideas?

Hello workingcars,
I would start your troubleshooting with the first article below and use the Wireless Diagnostic to help isolate and resolve the issue. You also may want to create a new Network Location to see if there is that resolves the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/ht4628
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G.

Having issues with loading pages with large web articles..

I'm having issues with pages loading all the way when I read articles off of wikipedia. Mainly from pages that have tons and tons of text, but it doesn't make sense. The browser indicates that the page is loaded all the way, but when I make it half way down the page, everything becomes completely white. Like LITERALLY everything becomes white. This prevents me from reading any further down the page, even though I would force the page to scroll down all the way, that doesn't help one bit.
Does anyone have a solution or a fix to this? I would like to continue reading my web articles, without being interrupted with these white pages/bugs.
Post relates to: HP TouchPad (WiFi)

Try clearing the cache for the web browser. While the browser is open, go up to Web/Preferences and choose "Clear cache".
Also try rebooting the TouchPad via Device Info/Reset Options/Restart.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Issue with Load Runner Recording

Hi Techi, I need to record the script for following funcitonality. when I click a button on application, it should download the templet and it open with MS Word, it is working fine, when I manualy executed. but when trying to record the script with Load runner 12.02 , it is not downloading the templet. Can you please help me to solve this issue. Thanks Muralikrishna P

I've used LoadRunner for this purpose before. There is a tutorial that comes with the product. My suggestion is to go through that and from there you should be able to get it working with enterprise. I feel that's the best way to get up and running quickly.

HT1925 I am having an issue with loading Itunes. I receive a missing dll file notice. Then another error message. I have reinstalled Windows & still get the error. I did not get the error until I recently did an ITunes update.

I am having an issue with ITunes after a recent ITunes update. I can not open ITunes, I get a message missing MSVCR80.dll file, Then an error 7 message. I have redone the OS for Windows 7 and restarted the computer. I keep getting the errors.

Do the following:
Uninstall from Windows the following five programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

Oracle 10g - issue with "DELETE from TABLE WHERE ID in (1,2,3)" (cfqueryparam used)

Hello, everyone.
I am having issues with running a DELETE statement on an Oracle 10g database.
DELETE
FROM tableA
WHERE ID in (1,2,3)
If there is only one ID for the IN clause, it works. But if more than one ID is supplied, I get an "SQL command not properly ended" error message. Here is the query as CF:
DELETE
FROM TRAINING
WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#">
AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
Anyone work with Oracle that can help me with this? I'm an experienced MS-SQL developer; Oracle is new to me.
Thanks,
^_^

Nevermind.. a co-worker just told me that I still have to use parenthesis around the values for the IN clause.

Issues with loading slideshows

I have built a site for a client using Muse and the client is experiencing problems with a couple of slideshows that won't load. I'm not having this issue using either Safari or Firefox, and there doesn't appear to be any problems using separate desktops (mates online are not having any issues).
The site in question has a number of slideshows on different pages, this issue is with the Gallery Page slideshow (apparently it doesn't load images at all, but the captions still rotate)
And the same slideshow issue with the Covers & Cloths page.
No-one else is experiencing this, the client's site renders fine on her tablet (running Safari) no problems there, it's just the desktop version . . . and there is no separate version for tablet or Desktop, I only created two versions of the site a Desktop and a Mobile. The site in question is www.finishingtouchuk.co.uk
Off the top of my head I was wondering if perhaps the client has loaded an image into the offending slideshows through the Dashboard and it hasn't been optimized, or perhaps the file names are conflicting, but because no-one else is having this issue I'm not sure how to advise my client, could it be some specific settings within their version of Safari?
Thanks
Penny

Hi Penny,
This could very well be as simple as their browser cache or a plugin/extension/add-on causing this.
You could advise them to try a different browser or try resetting their current browser to default settings. This seems pretty much a browser/machine specific issue.
Cheers,
Vikas

Issues with loading my iWeb site on my Yahoo hosted ftp

I consider myself pretty good at troubleshooting applications on mac but iweb 09 has really stumped me. My gut feeling tells me its more of a Yahoo site ftp issue but not sure. I'm not sure if anyone else has had this issue with Yahoo web hosting but after I have built my site on iWeb and hit upload it says successful. I go to my website and nothing is there at all. Nothing except an error. This is the site im building for: http://www.peterherro.com/ As you can see there is nothing. Yet I have tried uploaded via FTP in the settings. i even tried using mobileme and having it redirect from the site to the mobileme hosted site. iWeb always thinks it did it's job when i upload but it isn't doing a thing. If i go to my mobile me it shows that my site is uploaded but if i click the clink i get an error. this is the link. http://www.peterherro.com/Main/Welcome.html
I hope this makes sense and I am hoping someone might be able to give me some insight. I hate feeling defeated by this but i am at a lose. Thanks in advance!

Cany you tell iweb to redirect people from your domain name (EX: www.PeterHerro.com) to http://web.me.com/PeterHerro ?
You have it backwards. You tell the place where your personal domain name (Yahoo?) to point that name at your site hosted on iWeb. You can do this via url forwarding, where you just type http://web.me.com/PeterHerro into a form. Or you can do it via CNAME, where you set the www CNAME to web.me.com (plus put your personal name in the MobileMe account settings).

Issue with load from livecache

Similar Messages

Maybe you are looking for