Issue with loading a Planning Area using TSCUBE

Hi All:
I tried to load the data in production PA into QA PA (two different systems).
Steps I followed were:
1. Create a DataSource of the Production PA
2. Download the data from the DataSource into an Excel spreadsheet for specific range of date.
3. Then save the excel in .csv format.
4. Create a DataSource in QA and load data from .csv file. checked for data
5. Created an InfoCube matching the PA and loaded data from DataSource in QA.
6. Created CVC based on this InfoCube.
7. Loaded the PA in QA system using this InfoCube.
I found that the PA had data for all the KF excepting the Sales History and Invoice History. I checked the InfoCube and it had hsitory data. Not sure why history is not loaded. I have Proportional factor in the Infocube and I have mapped the UOM to the sales history.
Not sure why. Could anyone pl. help understand?
Thanks much in advance.
narayanan

Did you map the key figure of the cube to the key figure in the planning area?

Similar Messages

Having issues with loading web pages after using migration assistant

Last week my old macbook pro died and i purchased a new 13" mbp. I brought it home the first day i bought it and just turned it on and started playing with it and the internet was blazing fast, no issues at all. I then brought it back to the apple store where they peformed a migration from my old hdd to my new macbook pro. I then took it back to my dorm and connected to the same exact internet and now i am having problems loading web pages. Sometimes the page will load on the first try (click) and other times it will hang there loading but never fully load the page, and if it does load somewhat certain things are missing from the page. So i have to click the link again, and again, and sometimes again for it to finally load correctly. I dont know what is wrong but i have a feeling it is files from my old system conflicting with new ones when it comes to loading web pages. Everything is up to date the OS and firefox and i am having the same issues in safari. Also my ipad and blackberry have no problem connecting to the wifi so that is not the issue. I really hope someone can help me out because this is really starting to drive me crazy.

If your still having problems, or anyone else......
For future info, your in the wrong forum, your need the MBP area, this is the MacPRO area, no big deal, I can barely keep up with the M & B & P, etc...
Sounds like when it migrated over your old settings it may have gotten corrupted? It has been known to work if you were to just make another "Location" and just re-enter the information again and sometimes that will help. You might take it back to the store and see if it does it on their connection also. The silly person should have tested it first before letting you go.
Hope you got it fixed...

Issue with load from livecache

Dear all
In our APO system we have encountered a strange issue with data loaded from livecache into the infocube.
Problem is in the infocube, where there are two requests with a forecast version data with the same amount of data.
When I look in my infocube in APO I see e.g. the two following request IDs for a given product:
REQU_4CZ4SQ5PSM9V5PHJCHTIS24GK is the most recent load from Livecache (replacing any previous livecache loads).
APO_R43U3KZLM0V3WVK112YEK3KKLE cannot be located. It is not available on the infocube manage section
Ultimately this results in double data for this given product.
Do any of you have an idea as to what this APO_* request could be triggered from?
This is the input from the BW-team:
This indicates that an APO program has modified the infocube data without updating the request tab of the manage infocube. But it has updated the request id of the data which is transformed. With subsequent loads into the infocube, these records are split based on different request idu2019s, and loaded collectively into BI.
I hope you can help me out.
Best regards,
Anders Thinggaard

Hi Visu
It seems I made a typing error in my description of the problem. It is of course the DESTINATION combination, not the SOURCE combination, that is written into the infocube when realigning on the infocube.
This, of course, creates the request ID starting with APO. Besides that I get the request starting with REQU when I load from livecache using an infopackage. So far so good.
What confuses me though is that when I load back into livecache (load my planning area) is seems to pick up the correct amount of data (not taking the APO* request into account) whereas my load to my external BW out of my APO infocube seems to pick up both the REQU* and the APO* requests, resulting in dublicate data.
Have you had this challenge as well?
My first idea is to make the BW team make some ABAP coding leaving out any request ID starting with APO*. However it seems to me that this is a stardard functionality of APO, and I'd like to get to the bottom of this...
Best regards,
Anders
P.S. As I understand, the copy logic only dertermines whether data from source combination is added to or overwriting the data for the destination combination.

Issues with load from Excel

Dear all,
I have issues with loading the data from excel.
My excel file looks like this:
Time
Store
Neto_prodaja_ACT
Neto_prodaja_TAR
Jan-12
C1
16
16
Feb-12
C1
2
2
Jan-12
C2
1
1
Feb-12
C2
3
3
My procedure for load is:
CLEAR STATUS
Across Var Down Time, Store
Sel Neto_prodaja_ACT, Neto_prodaja_TAR
Sel Store Input
access lslink
     connect test1
     select * from my_list
     peek only 10
     read
end
When I load the data I receive following error:
      Time                         Store Neto_prodaja_ACT Neto_prodaja_TAR
    1 01/01/2012                   C1 16.00             16.00
    2 02/01/2012                   C1 2.00              2.00
    3 01/01/2012                   C2                                                                                                                                                                                                                                                                       1.00              1.00
    4 02/01/2012                   C2 3.00              3.00
4 Record(s) Read, 0 Record(s) Skipped.
DAT096:
Unexpected Dimensions in ACROSS/DOWN List For Variable NETO_PRODAJA_ACT
DAT096:
Unexpected Dimensions in ACROSS/DOWN List For Variable NETO_PRODAJA_TAR
The loaded data looks like this:
The data for store C2 is loaded also on store C1 so everything is messed up.
I also have a question regarding dimensions. I have a model in PAS which has data from different data sources (BW and excel). In excel I have dimensions which are not loaded from BW (they don't exist there). How to create such dimenison?
Thank you a lot in advance.
Best regards,
Petra

Petra,
The Forum isn't really designed as a training system but rather where people can share questions or get a separate pair of eyes to look afresh at issues that aren't working for some reason. This is particularly the case for something which is as important as creating dimensions.
The idea of the SSM Cube Builder/Model Designer was to enable people to build models with their relevant dimensions and metrics for demos and simple initial systems using manual data entry. If you are getting into building dimensions that will be outside BW then you are moving into the implementation arena rather than demo creation and need to work carefully so that things tie up.
I doubt people would expect to be able to set up/implement BW without training and SSM is the same.
If you would like training or would like to collaborate on a first project to enable skills transfer then my colleague Pedro and I would be happy to discuss this. We have done this with other people and it has worked well.
Regards
Colin

Issues with loads

There has been issues with loads to a Sales cube. The issue is that delta loads for the first few days in January have been lost (also deleted from PSA). I wanted to check the following before I make a suggestion:
1. Data up until the end of last year is available and okay
2. Create a copy of the original Sales cube
3. Generate a DataSource from the original cube
4. Load up until the end of last year to the new cube via the Datamart
5. Load from Sales LO extractors, carrying out the init from the beginning of this year to 9999 into the new copy
6. Load Deltas into the new copy
Thanks

Hi,
I hope You had taken no restriction on the date when you were doing delta init.thats why you are getting delta for all records.It would continue in futue also.
We can easily find out the sales document number which was created somewhere in December ending( Iam not saying the document should be last document of the December). Use that documetn number to fil the setup table as starting document number.
Now do selective deletion of the data from the cube which has Calnder day >= 01.01.2007. Now Do repair request with selection on calender day(or the field which is used to map to Calnder day) with the range 01.01.2007,12.12.9999 .
Next time when you are doing delta load to the cube, it will bring the records as nothng was happend.
Ofcourse as Roberto mentioned ,it is possible only in a specific case: if you are sure that a every sales document created before 31/12/06 cannot change anymore after that date !
What ever the date you feel comfotable (i.e you feel that the records which were created before that date were not changed in after Jan 01) instead of 01.01.2007 in the above explanations.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

My iPhone 5S has not connected to 4G LTE service in the last few days? Is there an outage/issue with 4G in my area (Pittsburgh) or is this a device specific issue?

My iPhone 5S has not connected to 4G LTE service in the last few days? Is there an outage/issue with 4G in my area (Pittsburgh) or is this a device specific issue?

JHblues Let's get your data working again. There are not any reported issues in the area. Try this step: http://vz.to/1kUSSk2
Sheritah_vzw
Follow us on Twitter
@VZWSupport

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using.

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?

From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
Sorry to bring the bad news.

Issue with PR conversion to PO using ME59 withqty of similar line items

Hi All,
I'm having an issue with PR conversion to PO using ME59
I have a PR with the following line items with all same details except quantity
ex 1
Mat Qty Unit Plant   St Loc
M1   1    EA   P1      S1
M1   29   EA   P1      S1
The PR brings in the Unit automatically
EA is Base Unit Of Measure -Material Master
BT is Order Unit           -Material Master
Conversion
30 EA = 1BT
When i convert this PR to PO using ME59N then i see 2 lines items
M1   1   BT
M2   1   BT
Its doubling the qty (2 BT = 60 EA)
ex 2
Mat Qty Unit Plant   St Loc
M1   1    EA   P1      S1
M1   2    EA   P1      S1
M1   27   EA   P1      S1
The PR brings in the Unit automatically
EA is Base Unit Of Measure -Material Master
BT is Order Unit           -Material Master
Conversion
30 EA = 1BT
When i convert this PR to PO using ME59N then i see 2 lines items
M1   1   BT
M1   1   BT
M1   1   BT
Its 3 times no
PR Qty = 30 EA
PO qty = 3 BT = 90 EA
I guess during conversion to PO
It sees PR Line item 1 and looks for another line items with similar fields ( in our case it sees line 2 in ex 1 and 2 and 3 in ex 2)
i adds the qty 1 and 29 in ex1 and converts the total 30 each to 1 BT and when it moves to 2 line it see item1 and again creates 1BT but the line item 2 was already considered and it should be ignored
Similarly if you see ex2 then it creates 3 limes with 1 BT each
Let me know how to resolve this issue
Thanks

As for std SAP ME59N - make sure there is not rounding value is activated in the Material master as well as info record
If this is not the case than check any custom code is activated for ME59N
becuase generally in many compnay when they use ME59n they don't want the same material from diff PR to create the diff line item in the PO so using the custom logic in the user exist they trick the code
it might be the case for you where you have issue.

Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

Hi, just got off the phone from BT Business. It is the Business 2wire hub that has the issue. The girl from technical talked through a direct modem to Mac connection and my download took 20 minutes. If you are on Fibre broadband this is the only current fix or a new router if non fibre customer. Hope that helps.

Performance issue with loading Proclarity Main Page..

Hi All,
I have Proclarity 6.3 installed on a Windows 2008 R2 OS. The Proclarity Reports was working well until last week. From last few days I am seeing a slow response time in loading the Proclarity Main page.
Loading Proclarity Main page on Internet Explorer 8 is taking 150 seconds and the same Proclarity Main page is loading on Google Chrome in 30 seconds.
Have any of you faced similar issue ?
Already below things explored
1. Clear Cache on PAS Tool
2. Event Viewer, Noticed if there is any error or warning
3. Tried browsing the Proclarity URL from server itself ( still the performance is slow)
4. Memory consumption validated on server side. MSSQLServer was consuming more space. Hence restarted /. After restart also same issue ( with loading main page in IE ONLY)
5. Checked drive space .. All drives has minimum 1.5 GB of free space
6. Cleared up Proclarity Event Logs
The issue is NOT ONLY with loading Main page.. Navigating to any further web pages in Proclarity STANDARD and PROFESSIONAL version is responding VERY slowly.
The only other option, that I am thinking now is RESTARTING THE WINDOWS SERVER. Which may not be a easy deal SINCE ITS A PRODUCTION SERVER.
But the loading of web page on Chrome is 30 seconds and on IE its 150 seconds ( i.e, 5 times more..) .. So does proposing to restart the server makes sense ?
Any help, suggestion , thoughts on what I am facing.. ? Thanks
Regards,
Aravind

onInputProcessing for two pages
DATA: event TYPE REF TO if_htmlb_data.
event = cl_htmlb_manager=>get_event_ex( request ).
IF event IS NOT INITIAL AND event->event_name = 'button'.
 navigation->goto_page( event->event_server_name ).
ENDIF.
page1.htm
<%@page language="abap" otrTrim="true"%>
<%@extension name="htmlb" prefix="htmlb"%>
<htmlb:content design="design2003">
 <htmlb:page>
 <htmlb:form>
 <htmlb:button text = "next"
 design = "NEXT"
 onClick = "page2.htm" />
 </htmlb:form>
 </htmlb:page>
</htmlb:content>
page 2
<%@page language="abap" otrTrim="true"%>
<%@extension name="htmlb" prefix="htmlb"%>
<htmlb:content design="design2003">
 <htmlb:page>
 <htmlb:form>
 <htmlb:button text = "Page 1"
 design = "PREVIOUS"
 onClick = "page1.htm" />
 </htmlb:form>
 </htmlb:page>
</htmlb:content>
above will work fine.
another way :
you can define a global variable in your application class and subsquently change its value according to your requirement as the name of the page
and whenever you want to move to some page. jaust assign on onclick event of the button:
navigation->goto_page(global_variable);
where global variable is the variable you have defined.
hope this works for you.
if not reply
regards,
Hemendra

Serious issues with Timer when RunTimeExceptions are thrown in TimerTask

Hi All,
I am facing serious issues with Timer and TimerTask.
Runtime exceptions thrown in TimerTask kill that one thread, thus making Timer dead i.e. scheduled tasks will not run anymore. Is there any way we can overcome this with Timer or it is just not possible?
I used try, catch blocks in TimerTask for RunTimeExceptions but no luck. Timer is not running any more once TimerTask throws any exceptions. Why it is not able to catch them? Is this known issue with Timer?
I am using Java 1.5.0_08.
Any guidance is appreciated.
Thanks in advance,

sairamvla wrote:
Runtime exceptions thrown in TimerTask kill that one thread, thus making Timer dead i.e. scheduled tasks will not run anymore. Is there any way we can overcome this with Timer or it is just not possible?Not possible (at least, not possible just by using a Timer).
I used try, catch blocks in TimerTask for RunTimeExceptions but no luck. Timer is not running any more once TimerTask throws any exceptions. Why it is not able to catch them? Is this known issue with Timer?It's perfectly possible for you to catch a RuntimeException, in a TimerTask or anywhere else. If you were thinking that there is a language feature or something which makes catching exceptions work differently in a TimerTask, you weren't thinking right. Your code is just wrong.

How can I share my ical work calendar with my coworkers that are using google calendar?

How can I share my ical work calendar with my coworkers that are using google calendar?

You can only do this by syncing your calendar to an external server - MobileMe is designed for this but if you don't already have a MobileMe account you can't start one now.
If you do have a MobileMe account the method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/sharedcalendar.html#publicshare
If you don't, you could sync to Google Calendar (Google accounts are free) or wait for iCloud which should be out in a couple of months and will probably provide this sort of facility.
You might like to consider BusyCal which is like iCal Pro - similar to iCal but with extra facilities. It can sync calendars on a Lan and also between accounts on the same machine (you have to have fast user switching enabled).
There is a free trial available on their website: it's slightly cheaper from the Mac App Store. (I have no connection with this company).

Issues with loading slideshows

I have built a site for a client using Muse and the client is experiencing problems with a couple of slideshows that won't load. I'm not having this issue using either Safari or Firefox, and there doesn't appear to be any problems using separate desktops (mates online are not having any issues).
The site in question has a number of slideshows on different pages, this issue is with the Gallery Page slideshow (apparently it doesn't load images at all, but the captions still rotate)
And the same slideshow issue with the Covers & Cloths page.
No-one else is experiencing this, the client's site renders fine on her tablet (running Safari) no problems there, it's just the desktop version . . . and there is no separate version for tablet or Desktop, I only created two versions of the site a Desktop and a Mobile. The site in question is www.finishingtouchuk.co.uk
Off the top of my head I was wondering if perhaps the client has loaded an image into the offending slideshows through the Dashboard and it hasn't been optimized, or perhaps the file names are conflicting, but because no-one else is having this issue I'm not sure how to advise my client, could it be some specific settings within their version of Safari?
Thanks
Penny

Hi Penny,
This could very well be as simple as their browser cache or a plugin/extension/add-on causing this.
You could advise them to try a different browser or try resetting their current browser to default settings. This seems pretty much a browser/machine specific issue.
Cheers,
Vikas

Delta load from planning area to third party system

Hi All,
Generally we sent full data load from DP planning area to back up cube in BW system..But suppose we are to send delta load from DP planning area to third party BW system, then what changes we need to do on the DP planning area side so that we send all the changed data from livecache. Can this be done in a standard way?
Thanks

Hi Tarun,
It's not possible to extract delta loads from the APO planning areas. The delta loads are only possible with standard BW objects, and planning area is not a BW object.
SAP doesn't provide the functionality to have delta loads when you use export data source based on the planning area.
PS: From backup point of view, anyway having delta load would not make much sense. We take the backup as a snapshot of a particular time, and if restoration is required, based on the request numer or the date of extraction, we restore the relevant data from cube to the planning area.
Thanks - Pawan

Illustrator CS5/CS6 on OSX 10.9.1 - Issue with loading fonts.

I'm using Illustrator CS6 on OSX 10.9.1. Ever since I've upgraded to OSX Mavericks, Illustrator has stopped loading some of the document fonts even though they are enabled and available for other applications. I get the font missing dialog every time I open the artboard after a system restart. I usually resolve this by opening the Font Book app, disabling and re-enabling the fonts. This refreshes the artboard and the fonts then appear to work as normal. Initially, I suspected a compatability issue with Illustrator CS5 and OSX Mavericks, but after upgrading to CS6, I continue to have the same issue. The fonts in question are ttfs and these worked fine previously.
How can I fix this?

Do you use any third party font maangement tool?
Which fonts are affected?

Issue with loading a Planning Area using TSCUBE

Similar Messages

Maybe you are looking for