Issue with Logical data clear in ASO

Since we upgraded to version 11 we have done away with clearing data from the ASO cube using #MI files, and have started using the Clear Data In Region MDX functionality. From my understanding, when doing a logical clear it should load offsetting values to a new slice, that will result in a value of 0 being retrieved from the DB.
The problem is that there is a 2-3 minute window between the clear script and the new data load where users are pulling not 0's, but incomplete data. Again, from my understanding this is not how a logical delete should act. This process runs every 2 hours, so there is a 2-3 minute window every 2 hours where the data users see may be incorrect. If we can't resolve this issue we will have to go back to loading #MI to clear data from the ASO DB which we are hoping to avoid. Also, we can't do a physical delete because it takes too long.
Any ideas? Am I misinterpreting the Logical Delete functionality?
Thanks in advance.

Just to confuse matters, this problem is intermittent and I haven't been able to successfully replicate it in our Test environment.
That would seem to indicate something else was going on in the DB that was interfering with the clear, but the logs aren't showing any errors, locks, etc that could have caused the problem.

Similar Messages

Performance issues with Logic Pro 9

Hi,
I'm experiencing quite big performance issues with Logic Pro 9:
bad midi timing and sync, user interface is kinda slowing and less reactive, ...
Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
Should I upgrade to 10.6.2?
Thanx

Hi,
I'm using the same machine ...
I never get any performance issues
I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
so more details about your setup are required to answare!
4GB ram???
I suggest to check your ram!!!
Ram must be compatible with Xeon Nehalem Try specification!
if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
G

I am having a issue with getting data useage alerts for my iphone 4s

I am having a issue with getting data useage alerts for my iphone 4s from AT&T. I do not download anything huge at all.
I looked into it and figured out that the phone dials out nightly at 12:29am every night. I went into my settings and went to general..about..diagnostics and useage..then diagnostics and useage data to see this. I then clicked don't send...but I am still getting useage alerts. Can anyone help me please...
Thanks

Honestly, from reading the thread linked, they all come off as a bunch of whiney people that cannot be bothered to help themselves.
Little to nothing in that thread indicates an issue beyond inept consumers. Yes, I read several pages on the incessant gripes. Very few made any actual attempts to troubleshoot issues before whining about the "Apple issue" and those that did actual troubleshooting got their issues resolved.
So no, Apple has nothing to fix beyond a few specific devices that are experiencing hardware issues.
If you have actually put forth effort and done the basic troubleshooting, take the device to Apple for evaluation and possible replacement. Whining will get nothing accomplished.

I am having major issues with Logic 8 and want to reinstall.

I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?

What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

Has anyone had issues with Administration\Data Import/Export\Data Import???

Has anyone had issues with Administration\Data Import/Export\Data Import???
I have a client who has recently upgraded from V2007 to V8.81. They were succesfuly using this standard function to import supplier prices to their master price list, but now it has failed?
I have looked at the file they are importing and it appears to be fine.
On closer inspection, it did contain approx 46,000 entries, so I took the first 1,000 and created a test file, which imported fine.
The only issue I found was Speed, with the test file of 1,000 records taking about 30 Mins to import. This appeared to get slower and slower the further through the file it got!
Based on this, I have estimated that the whole file would takle about 13 hours to import. The client say that when they used to run it on version 2007 it was far quicker?
In practice, it does appear to run, but the speed is the issue. Having said this, I set the whole file to run last night (over night)and this morning it had appeared to hang after about 2,307 rows, with nothing else being updated.
Has anyone any ideas or is aware of performance issues like this?
Thanks,
Ian

Always an option, but would you give your clients access to this tool?
Not sure really.
I have uploaded a copy of their database onto my test system and run the same routine. Its equally as SLOW
I can't gauage if its an issue with 8.81 that 2007 didn't have, as I only have the client's word on it, however I have no reason to disbelieve them.
Kind regards,
Ian

Issue with 2LIS_02_SCL Data source

Hi Everybody,
I am facing the below 2 issues with 2lis_02_scl data source,
1) This is fetching only the records ETENR (Delivery Schedule Line Counter) value with ' 1 ', It is ignoring others ex:2,3 and 4. Hence Data is not reconciling with ECC system.
2) The standard field GLMNG is not getting any data, Data was existed in table(EKET) level. So i have written the code and data is coming now. But the problem is, This is not considering the ROCANCEL indicator it seems. All the other key figures values are coming in with Negative sign When ROCANCEL Value is ' X ' or ' R ', But this field is getting all the positive values irrespective of ROCANCEL indicator. Hence showing the incorrect values compared to the ECC.
Can anybody help me on this,
Regards,
Gopinath

Hi Gopinath:
Have you already applied any SAP Note to solve this problem?
Please check if the SAP Note below is applicable to your system.
668177 - "LIS BW: wrong quantity for documents with invoice plan"
Regards,
Francisco Milán.

CVC creation - Strange issue with Master data table of 9AMATNR

Hi Experts,
We have encountered a strange issue with Master data table (/BI0/9APMATNR) of info object 9AMATNR.
We have a BADI implemented for checking the valid Characteristic before creation of the CVC using transaction /SAPAPO/MC62. This BADI puts a select on master data tab of material /BI0/9APMATNR and returns no value. But the material actually exists in the table (checked through SE16).
Now we go inside the info object 9AMATNR and go to the Master data Tab. There we go inside the master table
/BI0/9APMATNR and activate that. After activating the table it is read by the select statement inside BADI (Strange) and allows the CVC to be created.
Ideally it should not allow us to activate the SAP standard table /BI0/9APMATNR. I observed that in technical settings of this table it has single record buffering as switched on. (But as per my knowledge buffer gets refreshed every 2 to 4 mins and not in 2 days or something).
Your expert comment is valuable to us. Thanks.
Best Regards,
Chandan Dubey

Hi Chandan,
Try to use a WAIT statment with 5 seconds before your select statment.
I'm not sure whether this will work. Anyway check it and let me know the result.
Regards,
Siva.

Metronome click issue with Logic 8

Hello.
I'm having a strange issue with Logic 8 where the first click after hitting play or record is lower in volume than the rest of the clicks and sometimes isn't there at all - every subsequent click sounds fine. I have checked the metronome preferences and made sure the bar click is the same velocity as the beat click. I've double checked my entire configuration to see if there is a problem somewhere and everything seems to be right. I figured this might be just a bug but I wanted to post this to make sure.
Any ideas on how to fix this?
Here is the configuration I'm working with which has all the latest drivers and updates:
Mac Pro 3.2 GHz 8-core Intel
Mac OS 10.5.2
14 GB RAM
Logic Pro 8
Apogee Ensemble
Trilogy with the Intel wrapper (this might be pertinent)

You need to add more RAM.

10g Reports issue with XML Data Source

Hi,
Has anybody ever encountered an issue with Oracle 10g report using an XML as the data source? What happens is, some of the values in the XML are printed to the wrong column.
One of the elements in our XML file is a complex type with 10 elements under it. The first 5 are picked up properly, but the last 6 are not. Elements #6 to #9 has a minimum occurence of 0. What happens is when element #6 is present, but #7 is, the value for element #7 is passed on to element #6.
The XSD and XSL files are both valid since the reports were working when we were still using 9i. There is no hidden logic in the report which might cause this issue to come up, i.e., the report just picks up the values from the XML and prints it to the appropriate columns.
Any help will be greatly appreciated.

XSD used
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
        
        <xs:element name="TradeDetail">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="TradeType"/>
                                <xs:element ref="TradeID"/>
                                <xs:element ref="TradeDate"/>
                                <xs:element ref="FundID"/>
                                <xs:element ref="FundName"/>
                                <xs:element ref="DollarValue" minOccurs="0"/>
                                <xs:element ref="UnitValue" minOccurs="0"/>
                                <xs:element ref="PercentageValue" minOccurs="0"/>
                                <xs:element ref="OriginalTradeID" minOccurs="0"/>
                                <xs:element ref="CancellationFlag"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        <xs:element name="Instruction">
                <xs:complexType>
                        <xs:sequence minOccurs="0">
                                <xs:element ref="TradeDetail" maxOccurs="unbounded"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="InterchangeHeader">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="Instruction"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="FundID" type="xs:string"/>
        <xs:element name="TradeType" type="xs:string"/>
        <xs:element name="TradeID" type="xs:string"/>
        <xs:element name="TradeDate" type="xs:string"/>
        <xs:element name="FundName" type="xs:string"/>
        <xs:element name="DollarValue" type="xs:decimal"/>
        <xs:element name="UnitValue" type="xs:decimal"/>
        <xs:element name="PercentageValue" type="xs:decimal"/>
        <xs:element name="OriginalTradeID" type="xs:string"/>
        <xs:element name="CancellationFlag" type="xs:string"/>
</xs:schema>
XML used
<?xml version = '1.0' encoding = 'UTF-8'?>
<InterchangeHeader xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="TradeInstruction.xsd">
   <Instruction>
      <TradeDetail>
         <TradeType>Purchase</TradeType>
         <TradeID>M000038290</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>ABN Fund</FundName>
         <DollarValue>2111.53</DollarValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>Redemption</TradeType>
         <TradeID>M000038292</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>AMRO Equity Fund</FundName>
         <UnitValue>104881.270200</UnitValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>ISPurchase</TradeType>
         <TradeID>M000038312</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>MLC0011AU</FundID>
         <FundName>Cash Fund</FundName>
         <OriginalTradeID>M000038311</OriginalTradeID>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
   </Instruction>
</InterchangeHeader>
XSLT used
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
        <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
        <xsl:template match="/">
                <InterchangeHeader>
                        <xsl:for-each select="InterchangeHeader/Instruction/TradeDetail">
                        <xsl:sort select="FundName"/>
                        <xsl:sort select="TradeDate"/>
                                <TradeDetail>
                                        <TradeType><xsl:value-of select="TradeType"/></TradeType>
                                        <TradeID><xsl:value-of select="TradeID"/></TradeID>
                                        <TradeDate><xsl:value-of select="TradeDate"/></TradeDate>
                                        <FundID><xsl:value-of select="FundID"/></FundID>
                                        <FundName><xsl:value-of select="FundName"/></FundName>
                                        <DollarValue><xsl:value-of select="DollarValue"/></DollarValue>
                                        <UnitValue><xsl:value-of select="UnitValue"/></UnitValue>
                                        <PercentageValue><xsl:value-of select="PercentageValue"/></PercentageValue>
                                        <OriginalTradeID><xsl:value-of select="OriginalTradeID"/></OriginalTradeID>
                                        <CancellationFlag><xsl:value-of select="CancellationFlag"/></CancellationFlag>
                                </TradeDetail>
                        </xsl:for-each>
                </InterchangeHeader>
        </xsl:template>
</xsl:stylesheet>

Issue with the data of attachment of the mail with FM 'SO_NEW_DOCUMENT_ATT'

Hi Gurus,
I am developing my program in SAP R/3 4.7 system.
I have a requirement to attach a txt file to the email. I am able to attach the file and fill the contents of the file.
But the issue is with the data in the file. There are no line breaks in the data of file and all the words are saperated by space.
For EG: If I have filled 2 records(line1,line2) in the internal table provided to content_bin field, the data in the attachment looks like this.
l i n e 1 l i n e 2
but I want the data to be like below:
line1
line2
Below is my code:
Fill the document data and get size of attachment
     DATA:w_cnt TYPE i.
    DATA: WA_ATTACH LIKE LINE OF P_ATTACHMENT.
DESCRIBE TABLE p_attachment LINES w_cnt.
READ TABLE p_attachment INTO WA_ATTACH INDEX w_cnt.
Fill the document data and get size of attachment
gd_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( WA_ATTACH ).
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'EMAIL'.
gd_doc_data-obj_descr = sub.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Create attachment notification
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num   = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type   = 'RAW'.
it_packing_list-obj_descr = 'Job Log'.
it_packing_list-obj_name   = 'Job log'.
it_packing_list-doc_size   = it_packing_list-body_num * 255.
APPEND it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
loop at i_t_list_of_emailids INTO i_t_list_of_emailids_wa.
it_receivers-receiver = i_t_list_of_emailids_wa-emailid.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
it_receivers-express    = 'X'.
append it_receivers.
ENDLOOP.
data:   new_object_id like sofolenti1-object_id.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
            COMMIT_WORK                = 'X'
       importing
            sent_to_all                = gd_sent_all
            new_object_id              = new_object_id
       tables
            packing_list               = it_packing_list
            contents_bin               = p_attachment
            contents_txt               = it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
Kindly let me know to procedure to solve the iisue
Thanks in advance,
Kiran Kumar K

Hi Kira,
you can try to use a CR_LF to separate the records.
constants: con_cret type c value cl_abap_char_utilities=>CR_LF.
And when you append your record to the internal table add to the end the con_cret.
LOOP AT t_build into wa_charekpo.
    CONCATENATE wa_charekpo-order wa_charekpo-kunnr
                wa_charekpo-sel
           INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.

Partial data clear in ASO possible for multiple tuples?

Hi,
I am trying to do a partial data clear in an ASO cube. I need to clear FY12->Oct & FY13->Nov (consecutive periods). Here's what I tried:
+alter database 'GL_TXT'.'GL_TXT' clear data in region '{([FY12],[Oct]),([FY13],[Nov])}' physical;+
No error is thrown but the data isn't cleared either. The statement finishes execution almost immediately.
I tried the UNION function but that didn't work either. Here's how my statement looks with the UNION function:
+alter database 'GL_TXT'.'GL_TXT' clear data in region '{UNION({([FY12],[Oct])},{([FY13],[Nov])})}' physical;+
Again, no error but no clear either. The UNION pulls the correct data set when used in a Select statement:
+SELECT UNION({([FY12],[Oct])},{([FY13],[Nov])}) ON COLUMNS FROM GL_TXT.GL_TXT;+
I can get it to clear if I write separate statements for each period but I want to have them in a single script as I suspect two scripts wouldn't be very efficient.
Please help!
Thanks,
Shashi

Thanks for your reply Vasavya! Running the region clear scripts twice (once for each month) is still faster for me than using the report script approach. I want to see if having both periods in one statement will improve the performance :)
Regards,
Shashi

TenFourFox issues with computer date/time

I had an interesting problem tonight which I fixed and can replicate whenever I feel like. On my old Powermac I run TenFourFox which is what I assume most are doing.
The battery in my Powermac needs to be replaced, but I almost never unplug the computer so I'm never worried about the computers time, as it is always right.
Tonight I had to unplug it and when I started it up I got the "wrong time" notice but I mostly ignorred it. Everything worked well and then I tried using TenFourFox...it was an utter disaster.
It was slow, unreponsive and overall unuseable to say the least. After a lot of thinking I set the time right and it worked again, as it had before.
So after this I set the time wrong again and sure enough, TenFourFox before unuseable.
Does anyone know if there are any known issues with TenFourFoxx in the department? Could someone else try this? (Just set your clock back a few days and try to open TenFourFox)
I'm curious if I've found an issue with the app because I know for a fact ti's not hardware issues.

Running v 5.0 here, no problem in TFF changing the Time backwards, but Safari wouldn't work here until I cleared the Caches.
Some Servers are Date/Time critical & consider anything trying to connect reporting the Time off by more than a minute will refuse connections.

Presonus Faderport - issues with Logic?

Hi - I've just gotten the Presonus single-channel faderport - great and affordable little product; however, it's causing a strange issue in Logic despite their claim that it's compatible, and their tech support has led me to one possible issue I wanted to ask about...the faderport sends data exclusively on MIDI channel 1 apparently, which makes sense because when it's hooked up, any external sampler I have will not play out of channel 1. This seems like a fatal flaw - they said it could have to do with my environment setup, ie if any instrument has its MIDI port set to all...why would that be? I have multi-instruments that have each channel going to 1 of 16, and there are some old icons in the environment of instruments no longer attached that say "All". Otherwise, seems fine.
Any ideas of whether this is my Logic environment setup or the faderport? The faderport by the way is set up and installed correctly.
thanks!

update on this issue - I've found that the faderport can be installed and work without bottle-necking MIDI channel 1 and anything external that transmits on it only if it is installed while any external samplers are shut down and booted up after faderport installation.
however, the issue with it losing its connection to Logic quite frequently still occurs way too often making it too frustrating to use thus far- would love to know if anyone's figured out how to eliminate this problem and use the unit productively, because it has potential to be a great studio addition.
thanks, look forward to any feedback-

Issue with xsd Data type mapping for collection of user defined data type

Hi,
I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
Here is the code snippet.
sample.java
@WebMethod
public QueryPageOutput AccountQue(QueryPageInput qpInput)
public class QueryPageInput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class QueryPageOutput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class Account_IO implements Serializable, Cloneable {
protected ArrayList <AccountIC> fintObjInst = null;
public ArrayList<AccountIC>getfintObjInst()
return (ArrayList<AccountIC>)fintObjInst.clone();
public void setfintObjInst(AccountIC val)
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
Public class AccountIC
protected String Name;
protected String Desc;
public String getName()
return Name;
public void setName(String name)
Name = name;
For the sample.java code, the wsdl generated is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
name="SimpleService"
targetNamespace="http://example.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<wsdl:types>
<xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://example.org/types"/>
<xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
</xs:schema>
<xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://examples.org"/>
<xs:complexType name="queryPageOutput">
<xs:sequence>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="queryPageInput">
<xs:sequence>
<xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
<xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
<xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
<import namespace="http://example.org/types"/>
<xsd:complexType name="AccountQue">
<xsd:sequence>
<xsd:element name="arg0" type="ns1:queryPageInput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQue" type="tns:AccountQue"/>
<xsd:complexType name="AccountQueResponse">
<xsd:sequence>
<xsd:element name="return" type="ns1:queryPageOutput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
</schema>
</wsdl:types>
<wsdl:message name="AccountQueInput">
<wsdl:part name="parameters" element="tns:AccountQue"/>
</wsdl:message>
<wsdl:message name="AccountQueOutput">
<wsdl:part name="parameters" element="tns:AccountQueResponse"/>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="AccountQue">
<wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
<wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="AccountQue">
<soap:operation soapAction=""/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
<soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
Can some one help me with this.
Thanks,
Sudha.

Did you try adding the the XmlSeeAlso annotation to the webservice
@XmlSeeAlso({<package.name>.AccountIC.class})
This will add the schema for the data type (AccountIC) to the WSDL.
Hope this helps.
-Ajay

Issue with write Security filter in ASO 9.3.1

Hello All -
I'm having a strange security filter issue in system 9.3.1 ASO cube. We've the native users for the ASO cube and created several write security filters based on cost centers in that cube.
For example, the below security filter sometime works, and sometime not:
Write "Adjustments", @RELATIVE ("S532179", 0), @RELATIVE ("S587724", 0), @RELATIVE ("S525701", 0)
There are total 8 standard dimensions in the cube. I tried all possible combinations to make it work constantly, but it doesn't. Even modified the filter like below so that it has all dimensions (using LEVMBBRS, IDESCENDANTS, RELATIVE) , still users can't load data at level 0 members.
Write @LEVMBRS ("Chart of Accounts",0),@LEVMBRS ("Full Year",0),@LEVMBRS ("Business Unit",0),@LEVMBRS ("Fixed/Variable",0),@LEVMBRS ("Source",0),@LEVMBRS ("Products",0),@LEVMBRS ("Scenario",0),@LEVMBRS ("Cost Center",0)
It looks like the user and filter association is not working. If I give the user direct write access to the cube (bypassing filter totally), the users can write fine. Please help!

I didn't know that the logs didn't work; I tested it and they are not generated for ASO updates in 9.3.1. I didn't see any other setting that would cause them to be created; my guess is that the logs are created based on block manipulations that Essbase does internally using BSO. As there are no blocks in ASO then the same algorithm doesn't apply.
We log Essbase changes in our Dodeca product but we use a different algorithm. We evaluate the update in our server before committing the changes and generate a relational log that has the datapoint information plus the old value, new value and standard 'who' information for the person making the update.
Tim Tow
Applied OLAP, Inc

Issue with Logical data clear in ASO

Similar Messages

Maybe you are looking for