Issue with Logical Expression CO & Chinese Characters

All - I have the following issue.
y = 'ABCD...abcd...'
IF x CO y.
ENDIF.
This doesn't seem to work if x contains a value in only Chinese characters.  Does anyone know why?  Is there another way to evaluate a field to see if it contains only Chinese characters?

May be because text environment not set to chinese (sy-langu = 1)
add the following code before Y=' ABCD...'.
data lv_langu type sy-langu value '1'.
set locale language lv_langu.
Regards
Sridhar

Similar Messages

  • Syncing Fast Track Ultra (Slave) With Logic Express (Master)

    I'm trying to get my fast track to slave with Logic Express, using Logic as the master. It doesn't appear to be sending out any messages. On my fast track I can get the midi 'in' light to blink but not the 'out.' in Logic, the transport bar on the bottom, says 'no midi' for both the in and the out. Does this sound like a Logic setup issue or a fast track ultra setup issue?

    Hi,
    1st: You need to set your drum machine clock to external. That's important if you want to make Logic the master. Be aware any clock signal only is available when Logic is in play mode (naturally, but sometimes i forget even the most logical things).
    2nd: In the Audio-Midi-Setup, the Fast Track should be displayed. Open the MIDI window (Window-> show MIDI window). Click on the "add device" icon. A new device will be added (new external device). Now open the inspector for this new device. You can name it, adjust all these things like MIDI clock send/receive and other gizmos and give it a nice icon. Now you must "connect" this new device with you Fast track by simpy dragging a line from it's outputs to the Fast track input and vice versa. The MIDI setup window will now represent your hardware's cabeling.
    Once you have done this correctly, you should be able to correctly select the Drum machine in Logic.
    Fox

  • I have East/West Symphony.  Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?

    I have East/West Symphony. 
    Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?
    Also, would it work with Garageband??

    Thanks-that's the same driver I'm using now.
    The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
    They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
    Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
    Thanks very much for the response, it helps me get beyond this phase.
    Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

  • Performance issues with Logic Pro 9

    Hi,
    I'm experiencing quite big performance issues with Logic Pro 9:
    bad midi timing and sync, user interface is kinda slowing and less reactive, ...
    Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
    Should I upgrade to 10.6.2?
    Thanx

    Hi,
    I'm using the same machine ...
    I never get any performance issues
    I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
    so more details about your setup are required to answare!
    4GB ram???
    I suggest to check your ram!!!
    Ram must be compatible with Xeon Nehalem Try specification!
    if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
    G

  • I am having major issues with Logic 8 and want to reinstall.

    I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
    Any suggestions?

    What problems?
    The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

  • Issue with SSRS Expression

    Hi all, 
    I am facing some issue with ssrs expression. 
    I used below expression to show sum of budget. 
    =Sum(  CDbl(Fields!Budget.Value))
    When I preview the report it shows #Error in that textbox. 
    Please help me to fix this one , I am not getting where its breaking.. 
    Thanks
    Rohit

    Hi Rohit,
    According to your description, you want to sum the [EstimatedCostField] with an expression.
    In your scenario, since the [EstimatedCostField] is budget which you want to perform sum calculation, you should specify the sum expression like below:
    =Sum(CDbl(Fields!EstimatedCostField.Value))
    If issue persists, please run the report in the BIDS then check the warning message in output to see the detail information about the #Error. Besides, please also share the report design for our analysis.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • HT3423 My iMac came with logic Express 8 installed, how do I get it to work on my mac book pro

    My iMac came with Logic Express 8 Pre installed. How do I get it to work on my Mac Book Pro

    Along with your OS and applications installation DVDs, you should have gotten an LE8 installation DVD along with its manual and serial numbers when you bought your iMac. 
    Your license allows you to install LE8 on two computers as long as they are your computers, you are the sole user, and you do not run Logic on both simultaneously. So dig out your installation DVD, install it on your MacBook Pro and enter your serial number and you will be good to go.

  • Sync microKorg with Logic Express 9

    I'm trying to sync the arpeggiator of my microKorg XL with Logic Express 9, using Logic as the master. I seem to have almost done it, in that tempo changes in Logic change the microKorg's tempo. However, I can only hear the microKorg whilst I'm either recording or playing back - I can't hear it if I press a few keys.
    I think the problem lies in that I have "Local off" set in accordance with the microKorg manual. The manual says I should also "turn on echo back" on the computer - but I don't know how to do this in Logic Express.
    Grateful for advice.

    When you set "Local Off" in any synth with MIDI capability, it disconnects synth's keyboard from its sound engine. Switch it back ON to be able to play sounds again using microKorg's keyboard. There is no point to disable the keyboard in your case anyways. Unless of course, you want to avoid midi-loop (but that's only when you have both MIDI IN and MIDI OUT wired to Logic).

  • What's the best controller keyboard to run with Logic Express?

    I am a composer of mostly acoustic/classical music and was wondering about best user friendly controller keyboard for Logic Express. Does anyone have any recommendations? I am not a rocket scientist when it comes to working with connections, so I need something real easy in a 61 or 76 key synthesizer/controller. jack

    Cant really answer thatqestion in terms of the "best to use" with logic express, however, im in the opposite postion as you in the sense that im using logic with a motif 6 and want to sell it, and just get a controller. I produce hip hop, and have always prefered the sounds in the triton to the ones in the motif.....fo waht im using it for at least.

  • Control surfaces with Logic Express

    hello all
    Im new to MAc , completely new having been PC since the year dot...Having used Cubase since atari days I have a Steinberg Houston Controller surface. Anyone know if it is possible to use it with Logic Express before I spend £150 on the programe please??

    Hi,
    nope, the surface wouldn't work natively on a Mac. You can only use it's MIDI features and remap the controls to functions in Logic. As long as the interface sends MIDI, this will work, but there won't be any access to the special features i guess. Guess why? Steinberg wouldn't want to provide a driver for another DAW than Cubase. Sneaky little ones they are...
    But you can try to sell it through ebay.
    Fox

  • Can I use MainStage 2 with Logic Express 9.1.6

    Is it possible to use MainStage 2 with Logic Express 9.1.6.?  Are there any limitations to not having Logic Pro 9.  I'm very happy with LE9.1.6. as it meets all my needs (perhaps with the exception of not having Space Designer) but if I need to upgrade to get the most out of MainStage 2 then I will.
    Thanks.

    Actually I have found a way for at least the instrument plug ins to be accessed.
    I was able to set up an instance of Sculpture in MS2 and record it in LE using Soundflower.
    Route the audio from MainStage to Logic and record onto an audio track in Logic as follows:
    If not already installed, get SoundFlower. After installing it.
    A) Setup the sound you want in MS2 and audio output to Soundflower (remember to Apply Changes or it does not hold).
    B) In Logic Express set the audio input to Soundflower and create a new audio track for recording. Important: set Soundflower's audio output to however you listen to your audio or you won't hear anything.
    C) Press RECORD and start playing, LE captures Mainstage's sound.
    I have not tried to wire LE's output to MS2 to take advantage of Space Designer. but since this functions, I'm not sure why that couldn't work as well. It is still flipping though a few screens though...might just be easier to get Logic Pro from the App store....

  • Set-up Roland Octapad 2 with Logic Express 8

    Is anyone familiar with how to set up the Roland Octapad 2 Pad-80 with Logic Express 8. I want to use it as a midi controller for some drum samples I have (not general midi drums). But like Addictive Drums or BFD Lite. I have it connected with an edirol e-mux 1x1 interface. But when I hit the pads there is no response. I have it set up in the Audio Midi set up. Are there settings within the Octapad I need to change? I've spent two hours trying to get it to respond and it's becoming a pain in the arse.
    Thanks for any help.

    Logic has a built-in midi monitor in the transport bar. When you hit the pads, are you seeing notes listed there?
    The Octapad's model was "pad-80", and there's a manual available on the web - http://www.scribd.com/doc/8356768/ Roland-Octapad-II-PAD80OM. If you're seeing midi notes show up and can't change the settings in Addictive Drums to match them, you're going to have to change the notes on the pad -- which will probably be more difficult than doing it in the software.

  • Does mainstage work with logic express 9

    hi ,  do all the features and plug-ins work with logic express 9 or are some features disabled .
    or are they not compatible at all
    thanks

    I have just spoken to two supervisors and 4 underlings about this exact concern and they ABSOLUTELY REFUSE TO BUDGE in regard to a sidegrade or smaller upgrade fee. I have been a loyal Mac user, ****, an EVANGELIST since 1990, spent well over 100 grand on the apple products I needed and I tried being super polite, explained that I had barely had a chance to learn a thing about Express since I bought it in the store after realizing that there was no way I could afford the Logic Pro 9 box sitting next to it.
    THE ANSWER IS IF YOU WANT THE NEW, CHEAPER VERSION OF LOGIC PRO 9 AND MAINSTAGE, YOU NEED TO TOSS OUT YOUR ALREADY CANCELLED LOGIC EXPRESS 9 DISKS, FORGET YOU BOUGHT THEM IF YOU CAN, AND, IF YOU WERE DOWNSIZED LIKE I WAS 3 YEARS AGO BECAUSE MY BACK GAVE OUT...
    GO AHEAD. SEE IF YOU CAN KEEP YOURSELF FROM THROWING UP WHEN YOU HIT THAT PURCHASE BUTTON ON THE TWO PROGRAMS THEY REDUCED IN PRICE.
    REMEMBER, THOUGH...IT IS NOT LOGIC STUDIO YOU ARE GETTING. THEY SPLIT THE BOX UP SO THE REMAINDER OF THE SOFTWARE IN IT WENT INTO FINAL CUT PRO. THE ORIGINAL BOX YOU CAN STILL GET FOR $500 UNTIL THEY SELL OUT.
    DON'T SHOOT THE MESSENGER. THIS IS ONE ANGRY EX-EVANGELIST WHO NO LONGER HAS ANY REVERENCE LEFT FOR APPLE. I GUESS WHEN THEY LOST STEVE, THEY LOST TOO MUCH. SOMETHING IS VERY, VERY WRONG ABOUT THIS POLICY. SCREW THE PEOPLE WHO SPENT THE WHOLE AMOUNT, NOBODY AT APPLE REALLY CARES ABOUT ANYTHING EXCEPT WHAT IS LEFT IN YOUR WALLET.
    SORRY FOR THE RANT, BUT I AM IN SHOCK AFTER THE LAST TWO HOURS OF TRYING TO GET THEM TO SEE HOW WRONG THIS POLICY IS.
    WE HAVE BEEN SHAFTED, BIG TIME. IN THIS ECONOMY, THAT IS ONE HUGE INSULT IMHO.
    GOOD LUCK EVERYONE.

  • How can I midi Roland TD-9 KX2 with Logic EXpress 9?

    Hello everyone,
    Here is my setup:
    I have the Roland TD-9 KX2 connected to M-Audio MIDI In & Out and Audio 1/4" In & Out, Then connected to Logic 9 thru USB on my MacBook Pro.
    I create a new track and select Audio and then I create another track and this time I choose External.
    When I hit record, the audio track shows waveform recorded but the External/MIDI does not.
    Note: When I'm recording, I can see the MIDI notes (look like little blocks), but when I stop recording, They disappear...
    Can someone please tell me how I can execute this or of if anyone has a tutorial that they can share link of it.
    Thanks in advance,

    I had a simular problem. Only I had Ver 9 and needed 9.1.4 to be compatable with Lion. I had installed Lion and didn't think I would have any problem with Apple apps. Not the case with Logic Express. Here is what I did.
    First: I removed all versions that were previously installed on my Mac Pro. Then using the latest (9.0) I reinstalled. Important. DO NOT TRY TO OPEN APP. Next: down load (free) version 9.1.4 and install. Once everything is closed and disks are removed. Start Logic Express 9.1.4 and guess what...if just works.
    I believe some of the residual files were residing in my library some place and I didn't see them. Before I reinstalled I was recieving the message that I didn't have a qualifing version of Logic Express. This is when I had two versions 9.0.0 and 9.0.1. Someone said to remove the older version, I didn and nothing.
    Do what I say above and you will be rewarded.
    Good Luck

  • Bundled content with Logic Express?

    As a current Garageband user looking to upgrade to Logic 8 in the not-too-distant future, I'm wondering what bundled content (ie Apple loops, instruments etc) the Logic Express version comes with.
    I know that Logic Studio 8 comes with all the Jam Packs, and these aren't included with Logic Express. Even so, I'm wondering how Logic Express compares - does it still come with a decent amount of bundled loops, instruments etc (over and above what you get with Garageband) that a fledgling musician could use to get started?

    Logic Express comes with a nice amount of instruments and effects (as per the above links from Wikipedia & Apple) and all of your GarageBand jam packs will be available to Logic Express, too. So, right out of the box, you've got a very respectable setup - much better than GarageBand. The sampled instruments are fantastic, as are the amp simulations, effects, etc. etc...plus, it's very intuitive and your learning curve will be minimal. You'll definitely be happy with the big move upwards!

Maybe you are looking for