Issue with Maintenence View generated using SE54

Hello all,
We generated a view V_T16FC with the tables T16FC
T16FD
T16FG
when we try to see the data in the view , it is saying no data in the view , though the data is ther in all the three tables .
I checked foreign key relations they are fine .
can any please provide what could be the problem .
Helpful answers will be rewarded.
Urgent !!!!

Check the below link.
[http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ecec446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ecec446011d189700000e8322d00/content.htm]
Hope it helps.
Thanks,
Balaji

Similar Messages

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Issue with Tree view

Hello experts,
I am facing a very strange issue with tree view.
I have created a custom component with a tree view. All data are coming in the tree view. But the strange thing is that the data is not getting displayed on the screen.
I am sure about the data because, when I am selecting a line from the tree, the data from that line is coming to the main screen.
Please help!!
Regards
Debolina

Hi experts...
Any pointers to this issue???
Please help!
Regards,
Debolina

I have some issue with my bluetooth im using an iphone 5 its just keep on searching bluetooth devices it cannot detect other bluetooth device, any solutions to my problem?

I have some issue with my bluetooth im using an iphone 5 its just keep on searching bluetooth devices it cannot detect other bluetooth device, any solutions to my problem?

Hi miffyzoo,
If you are having bluetooth pairing issues with your iPhone and your Mac, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
- Brenden

Issue with Adobe Viewer.

I am a Coldfusion developer. I have an application that takes some coldfusion variables and populates a pdf form that was created in LiveCycle. In the past this worked fine. Today someone told me of an issue they are having. Now when the view this pdf in a browser the fields are not populated. This is a major drawback from the way things use to work. Is this a bug or did you intend to do this?

Yes, I have tested on Chrome, Firefox, Safari, Opera and IE. It does not work in Firefox 19 or in Chrome 25. In Firefox I only get the hard coded text of the form. In Chrome I get the placeholder text in the form fields. Firefox shows a yellow message at the top "This PDF document might not be displayed correclty." and their is a button labeled Open With Different Viewer. Some of my users are not very tech savy and may miss that option. I am populating the form using the cfpdfform tag with an action of populate on a pdf form created in live cycle. I use the cfpdfformparam tag to put the values in the fields.

Performance Issue with PAY_BALANCE_VALUES_V View in Oracle R12

Dear all ,
We have recently upgraded from 11i(11.5.10.2) to R12(12.1.3). We are facing one Issue with slow performance of the queries where PAY_BALANCE_VALUES_V is used. We have so many reports & logic in Payroll which uses this View.
In 11i this works fine, however in R12 it takes very long time. There are no configuration changes we have done from 11i to R12.
Is there any way to optimize the performance or alternate way to retrieve the Balances Data in Payroll ?
Any heads up would be highly Appreciated.
Thanks,
Razi

Hi Razi,
The balance related performance issue is written in the following note.
Note:1494344.1 UK Payslip Generation - Self Service Program Takes Much Time To Complete (Performance Issue)
This issue was fixed in HR_PF.B RUP6 or patch:14376786. Did you apply this patch? If not, I suggest you apply it.
Also, HR_PF.B RUP6 has some balance related performance issues.
If you already have applied HR_PF.B RUP6, I suggest you log a SR with SQL trace.
Thanks,
Hideki

Issue with instant ringback when using sip trunk to SP

Hi all,
We use CUCM 8.0.2.
We have a SIP trunk to a SP connected via one of our Cisco 2911 routers configured as a CUBE.
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, RELEASE SOFTWARE (fc2)
c2900-universalk9-mz.SPA.150-1.M3.bin
Cisco CISCO2911/K9 (revision 1.0)
Technology Package License Information for Module:'c2900'
Technology Technology-package
                  Current       Type
ipbase        ipbasek9      Permanent
security      securityk9    Permanent
uc              uck9            Permanent
data           None            None
We also have several ISDN lines that run out via various Cisco routers configured as H323 gateways.
We use 7945 and CIPC for our phones.
We're having an issue with calls going via the SIP trunk where we hear ringing instantly after dialling - but before the actual device at the other end starts ringing (considerable difference).
Using the SIP trunk: If I make a call to my mobile phone - I hear ringing instantly - about 3 rings before my mobile phone actually starts ringing - undesireable.
Using H323 gateway: If I make a call to my mobile phone - I hear silence for a bit - then ringing when the mobile starts ringing - desired.
Using SIP trunk: If I make a call to a landline that is ready - it rings instantly for at least 1 ring - before the actual phone I'm calling starts ringing - undesireable.
Using H323 gateway: There is a momentary pause before hearing ringing on my phone and the phone I dialled - desired.
Using SIP trunk: If I make a call to a landline that is off-hook (with no call-waiting/etc.) - it rings once and then returns the busy signal (the worst issue) - undesireable.
Using H323 gateway: There is a momentary pause before hearing busy signal - desired.
Phone to phone internally (same network): Operates as expected (instantly rings locally and on the phone I'm calling). Between phones that utilise the SIP trunk and phones that utilise the H323 gateways within the same network - communication is instant and as expected.
Any ideas why this happens and how to stop it?
I want it to not ring until the situation is known and that it can provide the appropriate feedback (ringing/busy/etc.).
Some possibly relevant config (note that there is a known bug with this IOS that meant I had to declare the codec in each dial-peer as the voice class would not work):
voice service voip
address-hiding
mode border-element
allow-connections sip to sip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
header-passing error-passthru
early-offer forced
midcall-signaling passthru
interface GigabitEthernet0/0
ip address x.x.x.x 255.255.255.252
ip access-group acl.SIP-IN in
no ip redirects
no ip unreachables
ip verify unicast reverse-path
ip virtual-reassembly
duplex full
speed 100
no cdp enable
gateway
timer receive-rtp 1200
sip-ua
connection-reuse
gatekeeper
shutdown
dial-peer voice 1 voip
description *** INBOUND CALLS FROM CARRIER ***
translation-profile incoming SIPTRUNK-INCOMING
session protocol sipv2
incoming called-number #blah blah#
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 61 voip
description **** WA, SA AND NT NUMBERS ****
destination-pattern 0[8]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[8]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 81 voip
description **** MOBILE NUMBERS ****
destination-pattern 0[4]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[4]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 500 voip
description *** INBOUND SIP TRUNK TO CUCM PUB ***
translation-profile outgoing SIPTRUNK-CALLING-ADD-0
preference 1
destination-pattern 5[12]..
session protocol sipv2
session target ipv4:<OUR CUCM PUBLISHER IP>
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
Any help or a point in the right direction would be greatly appreciated.
Cheers,
Brett

I ended up resolving this issue as follows:
In CUCM, under Device > Device Settings > SIP Profile.
I modifed the profile relevant to my SIP trunk, under the "Trunk Specific Configuration", I set "SIP Rel1XX Options" from "Disabled" to "Send PRACK if 1xx Contains SDP".
Now, I get the expected delay before hearing ringback.
Solved!

Issues with UpdateAction and later using jbo:RowsetIterate

Hello -
I am putting together a BC4J/Struts web app and am having some issues
with using the oracle.jbo.html.struts11.actions.UpdateAction class.
I am trying to figure out the correct way to reset a row after validation exceptions
so that <jbo:RowsetIterate> doesn't blow up when it hits the row if the user doesn't fix the
data they entered in to pass validation.
Call the objects being update 'Accounts'.
Pass 1:
User changes account data in an edit page and submits.
Struts hands off control to an action that is a subclass of UpdateAction which invokes super.execute(...).
UpdateAction does its thing - catches the validation errors and sticks them in ActionErrors.
Control gets passed back to the edit page with the errors displayed.
This is expected. HOWEVER, if the user goes to a page that lists accounts (via <jbo:RowsetIterate>) it blows
up on the edited account because it tries to validate the row. So...
Pass 2:
After super.execute(...) check to see if any errors happened (by whether or not the forward returned indicated success).
If there were errors, refresh the row via:
BC4JContext context = BC4JContext.getContext(request);
Row row = context.getRow();
row.refresh(Row.REFRESH_WITH_DB_FORGET_CHANGES | Row.REFRESH_REMOVE_NEW_ROWS);
This works (not blowing up if user goes back to listing page) for emptying a mandatory field (JBO-27014)
but not for inserting too much data into a field (JBO-27010). I've tried this with REFRESH_UNDO_CHANGES as
well with the same results. So...
Pass 3:
Instead of refreshing the row in my update action, rollback the transaction via:
BC4JContext.getContext(request).getApplicationModule().getTransaction().rollback();
However this seems unnessary - I don't want to rollback the whole transaction just to undo changes to one row. Is there some better way to fix the issue?
Any suggestions?
Thanks,
-- Scott

I don't know why either, but I'd love to fix it. Please install one of the debug packages (this looks like x86_64?):
http://dev.archlinux.org/~dreisner/kmod … pkg.tar.xz
http://dev.archlinux.org/~dreisner/kmod … pkg.tar.xz
Run 'gdb --args depmod 3.2.2-1-ARCH'. When it crashes, type 'bt full'. Post all that output here (either in code tags or on a paste service)

Any suggestions on how to fix installation issues with iPhoto & iMovie on used Mac mini?

I bought a used, mid 2011, mac min. The selller deauthorized all his applications and resotred it to factory settings for me. When I received it, I added myself as an administrator and deleted the dummy user the seller had created after restoring the OS. The first thing I wanted to do was install applications I already have on my iMac (also running OSX Lion). It would not install iPhoto or iMovie. It said these applications were assigned to a different apple id, the previous owner. I decided to erase the hard drive and reinstall Lion myself. I ran into some snags (due to my internet connection) and had to use recovery thumb drive, but it worked.
I successfully re-installed Lion on the newly formatted hard drive.
I still cannot install iPhoto and iMovie. It just give me an error now. Couriously, it installed Garage Band just fine. I haven't had any other issues with other applications I purchased on my other iMac.
Anyone have any suggestions, besides purchasing iPhoto and iMovie on the mac mini?

Ethernet cord connected to the router solved it. This is exactly what I had to do when I reinstalled the operating system. For some reason my wireless internet is highly inreliable. It drops out constantly. I've always had my iMac hard wired to the router, but I'll have to figure out a fix for this Mac mini. I can't have a 30ft ethernet cord running through the middle of my basement. Thanks.

Issues with iTunes Home Sharing using iPhone 6 Plus

Hi guys,
I'm having problems with streaming music and video on my iPhone 6 plus from my Macbook Pro (mid 2010 model) using iTunes' Home Sharing . I am able to stream without any issues using my iPhone 4S and my Apple TV, however.
I am using iTunes version 12.0.1.26, iOS 8.1.2, and OSX 10.9.5.
Using my 6 plus, I am able to connect to my iTunes library, both music and video. Album art shows up for music but no cover art for the videos. So, all in all, I am able to see the contents of my library.
However, when I try to play songs, a couple things may happen. First, nothing plays for about 10 seconds; then a second or two of the song plays followed by silence again, appearing as if it's buffering. Second thing that may happen is that a second or two plays immediately followed by silence. If I press next to play the next song, what usually happens is that nothing plays, although the song title does appear.
As seen in this video, I don't have any issues with my WIFI connection or internet speed, as demonstrated using the iPhone 4S and Apple TV.
I have no clue as to why this is happening.
Hopefully someone could shed some light with this issue. Please feel free to comment. I'm open to and appreciate any suggestions while Apple tries to find a solution. Thanks.

UPDATE
So, after working with the guys at Apple, they were able to provide a solution. Now I have no problems using Home Sharing with my iPhone 6 Plus!!!
(I should add that I have the Linksys Advanced Dual-Band N Router (E2500))
The issue was fixed by giving one of the wi-fi channels a different name, thus splitting the channels into 2.4 GHz and 5 GHz. Then, I connected my iPhone to one channel (2.4 GHz) and my MacBook Pro to the other channel (5GHz). In this configuration, I have had no issues streaming my music and video.
It seems that the problem is some kind of interference between both devices when using the same channel (i.e., when both the 2.4 GHz and 5 GHz channel share the same name).

Issue with deleting a group using Request APIs in OIM 11g R1

Hi,
I am facing an issue with Request Based provisioning in OIM 11g R1.
I am currently testing a scenario where i have imported a data set for 'Modify Provisioned Resource' and am able to add a group/entitlement to an already provisioned resource by using the following code :
        RequestBeneficiaryEntityAttribute childEntityAttribute= new RequestBeneficiaryEntityAttribute();
        childEntityAttribute.setName("AD User Group Details");
        childEntityAttribute.setType(TYPE.String);
        List<RequestBeneficiaryEntityAttribute> childEntityAttributeList=new ArrayList<RequestBeneficiaryEntityAttribute>();
        RequestBeneficiaryEntityAttribute attr = new RequestBeneficiaryEntityAttribute("Group Name", <group>,                                                                       RequestBeneficiaryEntityAttribute.TYPE.String);
        childEntityAttributeList.add(attr);
        childEntityAttribute.setChildAttributes(childEntityAttributeList);
        childEntityAttribute.setAction(RequestBeneficiaryEntityAttribute.ACTION.Add);
        beneficiaryEntityAttributeList = new ArrayList<RequestBeneficiaryEntityAttribute>();
        beneficiaryEntityAttributeList.add(childEntityAttribute);
        beneficiarytEntity.setEntityData(beneficiaryEntityAttributeList);
This works fine for adding a group but if i try to remove a group by changing the action to Delete in the same code, the request fails. The only change made is in the following line:
childEntityAttribute.setAction(RequestBeneficiaryEntityAttribute.ACTION.Delete);
Could you please suggest where can this possibly be wrong.
Thanks for your time and help

Hi BB,
I am trying to follow up your response.
You are suggestng to use prepopulate adapter for to populate respource object name, that means We have to just use an sql query from obj tabke to get the resource object name. right ?? it could be like below, what should I have entity-type value here ??
<AttributeReference name="Field1" attr-ref="act_key"
available-in-bulk="false" type="Long" length="20" widget="ENTITY" required="true"
entity-type="????"/>
<PrePopulationAdapter name="prepopulateResurceObject"
classname="my.sample.package.prepopulateResurceObject" />
</AttributeReference>
<AttributeReference name="Field2" attr-ref="Field2" type="String" length="256" widget="lookup-query"
available-in-bulk="true" required="true">
<lookupQuery lookup-query="select lkv_encoded as Value,lkv_decoded as Description from lkv lkv,lku lku
where lkv.lku_key=lku.lku_key and lku_type_string_key='Lookup.xxx.BO.Field2'
and instr(lkv_encoded,concat('$Form data.Field1', '~'))>0" display-field="Description" save-field="Value" />
</AttributeReference>
Then I need think about the 'Lookup.xxx.BO.Field2' format.
Could you please let me know if my understanding is correct?? What is the entity-type value of the first attribute reference value?
Thanks for your all help.

Issue with Parent child dashboards using SWFLoader component

Hello Gurus,
I am using Parent-child dashboards approach in our project.
I have multiple child files embedded in Parent dashboard using the SWFLoader (directly passing the URL as SWFLoader value) to load child dashboards. All the child, parent swf's are saved in the same intranet folders.
When I open the parent SWF, everything loads fine in the intranet.
But for some users, when they open from the intranet, the child dashboard doesnt load up properly or size of the dashboard gets reduced to a small version. (Iam sure that it has nothing to do with the access/privileges)
Any thoughts/ideas what could be causing an issue with child dashboard/resizing of the child dashboard.
Please help!
regards,
S R

Check whether the machine has compatible flash version in error specific machine and your machine.

LightweightDispatcher issue with Applets in Browser using Java 7, not 6

Spent the last year at work setting up some GUI JApplets for demos our of code. The JApplets house a number of layers of JPanels and JComponents, but should have no heavyweight components as children. I've set up standalone applications that run one of the JApplets as a child of a JFrame, and those demos have no trouble. When I run the same demo but as a JApplet in a browser, I get errors. Please note that the demo is a JApplet but written like the demo that uses a JFrame, so the JApplet causing an issue is a child of the JApplet the browser knows about.
The issue is seen when the user mouses-over the child JApplet. The listener of the component being moused-over is trying to send an event that the LightweightDispatcher is erroring trying to retarget. It does not seem to find the component that should be receiving the event. For reference, the JApplet implements the mouse-listener interface and is set as the mouse-listener for all its children recursively. Here is the error that is seen:
Exception in thread "AWT-EventQueue-2" java.lang.AssertionError
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.trackMouseEnterExit(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
     at java.awt.EventQueue.access$000(Unknown Source)
     at java.awt.EventQueue$3.run(Unknown Source)
     at java.awt.EventQueue$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue$4.run(Unknown Source)
     at java.awt.EventQueue$4.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
and it repeats that for every mouse event that tries to fire within the child JApplet.
Any thoughts on what this could be?
I had a similar issue with key strokes not finding the focused JComponent within the child JApplet, but I made my own KeyboardEventManager to handle that issue. Unfortunately there are no paths like that to override for the mouse listeners, not to mention that there is no focused object for the events erroring.
I do see that when I stop adding the mouse-listeners then the error does not appear, so I'm sure its related to that.
I suppose the most important note here though is that the JApplets were built using Java 6, but the error is seen when running the JApplet with the 1.7 JRE. Also, the JApplet is opened using a JNLP. When the JNLP is set to run at 1.6+ the demo runs fine, when set to 1.7+, the error is seen.
Please let me know if anyone has seen this or has a solution, or if I should report this as a bug to Oracle.

This shouldn't be the case. You did make sure you are pointing the applet at the plug in correct? That means you are using an <object> tag as opposed to the <applet> tag in the HTML file?
If not, run your HTML page through the HtmlConverter that comes with the plugin and try using the resulting HTML.
Bryan

Planning Data from formatting issue with Smart view in 11.1.2

Hi,
We are facing one strange issue in Smart view.
We have created a dataform in Planning as follows:
Columns:
FY10 FY10 FY10
Budget Budget Budget
Jan Feb Mar
But when we open this in Smart view, we are getting the columns as follows:
FY10
Budget
Jan Feb Mar
i.e. year and scenario are spreading across months instead coming at each column level.
We are using Hyperion Planning 11.1.2, Smart View 11.1.2 and Office 2003.
Please help us.
Thanks,
Naveen Suram

Are you saying you want the dimension members FY10 and Budget to be repeated in each column?
I think that can be done for Ad-Hoc Analysis mode, but not where you have opened up a Planning form.
Cheers

Issue with correct trajectory reading using Labview and Compumotor

Hi everyone,
I am having some issues with my compumotor/Labview communication and was wondering if anyone had any advice.
My setup is a National Instruments PCI-7432 control board linked to a
UMI-7762 Interface board then I have my driver and motor, the Compumotor
M83-135 R14, serial 18054. When I use the NI Measurement and Automation Explorer and tell it to go at a velocity, the velocity is no where near the commanded value.
It is not returning any errors either, I’ll tell it to do say 500 rpm’s and it will take ~2.5 seconds to make a complete revolution. I can get the motor to spin at a very fast rate so it is working, I just was wondering if there was something wrong that would cause it to deviate so far off the assigned velocity.
I didn't know if I accidentally changed a setting with labview that would cause it not to read the velocity correctly or something like that.
Thank You
Keith Kirkwood

Keith,
It sounds like one possible issue is that your feedback is not correct. In which case you'll want to check encoder feedback -- disable your motor in software but leave everything connected. Then manually turn the motor and check if the 1-D Interactive section in MAX reports the correct steps per one revolution. If not, then check that the encoder setup section is correct, specifically the encoder counts per revolution.
Also, your motor may need to be tuned, assuming that it hasn't already been tuned. Is your motor a servo or stepper motor? From what I could find online it looks like the M83-135 is probably a servo. Here are a couple links to documents that will help you tune your motor, which often solves velocity issues:
Understanding Servo Tune
http://zone.ni.com/devzone/cda/tut/p/id/2923
And if that seems not to work,
Unable to Tune a Servo Motor
http://digital.ni.com/public.nsf/websearch/19668AB2D4997F3D86256E940082F1EF?OpenDocument
Let me know how it goes, or if you have more questions. Thank you.
-Allison S.
Applications Engineering
-Allison S.
Calibration Services
Product Support Engineer

Issue with Maintenence View generated using SE54

Similar Messages

Maybe you are looking for