Issue with master data deletion

Hi,
In one of our report, there is a filter option on country.The help values on this filters shows some country codes along with country Text values.These codes were once used before the codes with text were maintained.We dont want these codes to appear in the selection options.
Filter looks like this :
AE
AZ
Austria
Australia
B
Belgium
Now, once the texts were maintained, we deleted the data from cube and reloaded it however, the filter option still shows those codes.
I checked in the cube entries and these codes are no where used.
These codes are however, still lying in the dimension table.
how can we get rid of these country codes in the selection option.
Query already have option of having only posted values in Infoprovider as selection input.
I hav tried RSRV elementary test "Entries not used in dimension table" n this didnt work.
Any clue ?
Regards,
Tapish

Dbl click 0COUNTRY infoobject, under 'Business Explorer' tab, select Only Values in InfoProvider' for 'Query Def Filter Value selection' & 'Query Execution Filter Value selection'. See whether this works.
ELSE
Delecion of the master data
Deleting Master data

Similar Messages

CVC creation - Strange issue with Master data table of 9AMATNR

Hi Experts,
We have encountered a strange issue with Master data table (/BI0/9APMATNR) of info object 9AMATNR.
We have a BADI implemented for checking the valid Characteristic before creation of the CVC using transaction /SAPAPO/MC62. This BADI puts a select on master data tab of material /BI0/9APMATNR and returns no value. But the material actually exists in the table (checked through SE16).
Now we go inside the info object 9AMATNR and go to the Master data Tab. There we go inside the master table
/BI0/9APMATNR and activate that. After activating the table it is read by the select statement inside BADI (Strange) and allows the CVC to be created.
Ideally it should not allow us to activate the SAP standard table /BI0/9APMATNR. I observed that in technical settings of this table it has single record buffering as switched on. (But as per my knowledge buffer gets refreshed every 2 to 4 mins and not in 2 days or something).
Your expert comment is valuable to us. Thanks.
Best Regards,
Chandan Dubey

Hi Chandan,
Try to use a WAIT statment with 5 seconds before your select statment.
I'm not sure whether this will work. Anyway check it and let me know the result.
Regards,
Siva.

Issues with Master Data Change Run after upgrade 7.3.1

We have upgraded to 7.3.1 on both our BW and ECC clients. When we first run out change run in BW it chose to drop and rebuild aggregates
on changes that usually don't cause a drop and rebuild. They usually do a delta.
Has anyone had this issue once upgraded?
We looked at our performance setting in SPRO for aggregates and the settings have not changed.

I loaded data for 0Material, 4 fields are not getting populated....when I checked in R/3 base table and RSA3, I am able to see data for those 4 fields. But in PSA and 0MATERIAL I am not seeing data for those fields.
THose 4 fields are Z fields mapped to Standard fields in MARA table.
As you say you can see the values of these fields in RSA3, We can rule out that the fields arent hidden. Check the mapping on the BI side, do you have all the Zinfoobjects added to the Omaterial and the corresponding mapping of source fields to target fields.
0CUSTOMER_ATTR has some data...I added new field in datasource as well as in BW also. After creating transformation I executed the DTP, it is throwing same error in every data package
"Record filtered in advance as error records with the same key exist".
Load till PSA is Init with data transfer and DTP is delta.
there are some duplicate records in the master data values that are coming in. You can manually change them in PSA and load. And if you are sure the duplicated records can be dropped, you can tick the HANDLE DUPLICATE RECORDS in DTP - update tab

Issue with Master data change workflow in GRC PC 10.1

Hi,
I have configured the work flow for master data changes in GRC PC 10.1, however approver is not able to view the request in inbox where are the organization owner is able to see the review for change request in inbox.
Please let me know if there is any config where we need to set the approvers for workflow, so that the system creates a request for approver.
Regards,
Giridhar

Dear Giridhar,
Please, check the following configuration:
1. Activate the workflow (Path: SPRO -> GRC -> Shared Master Data Settings -> Activate Master Data Changes)
2. See whether Checkbox "Approval" is ticked for the selected entity
3. If you activate master data changes, please check whether the correct roles are indicated in the Maintain Custom Agent Determination Rules in the Workflow settings.
Business Event: 0FN_MDCHG_APPR
Role: Select the role you gave to the approver
After performing this configuration, a task must appear in the work inbox.
Best Regards,
Fernando

Master Data Deletion

Hello Experts,
I know this is not a new topic to be posted in forum as we can find lots of threads on the same. But i tried different ways and could not succeed and so there is no other way except to post what i did and get suggestions from you all. Any help will be greatly appreciated and rewarded.
Now coming to the scenario where i am in: There are two invalid master data values in SID table (no attributes for this, => SID and value). I tried deleting the two values
1. using functional module RSDDCVER_USAGE_MDATA_BY_SID. But this resulted in short dumps with messsage INVALID TAB NAME
2. using program RSDMD_DEL_MASTER_DATA: Though i could delete values in development in few seconds, this program took more than 3hrs and did not complete. When i checked the process in SM66, it was deleting unused dimension Ids in other dimension of infocube in which this object is being used.
3. i could not try "maintain master data" of infoobject from RSA1 since i dont have authorization to do it.
i think the only way is to delete using a custom program. Any thoughts, any experiences please share and do let me know in case of any details.
thanks,
Madhav

Hi Madhav,
I don't have a specific answer for you, but I had a similar problem with master data deletion. It was with 0Vendor and I just wanted to delete all the unused entries, but running the RSDMD_DEL_MASTER_DATA program would always give a short dump. Same think if I tried to delete using the Delete Master Data button on InfoObject.
Applying the latest SPs worked for me. We are on BW 3.5 (NW2004), SP 18.
Good Luck.
Dave

Has anyone had issues with Administration\Data Import/Export\Data Import???

Has anyone had issues with Administration\Data Import/Export\Data Import???
I have a client who has recently upgraded from V2007 to V8.81. They were succesfuly using this standard function to import supplier prices to their master price list, but now it has failed?
I have looked at the file they are importing and it appears to be fine.
On closer inspection, it did contain approx 46,000 entries, so I took the first 1,000 and created a test file, which imported fine.
The only issue I found was Speed, with the test file of 1,000 records taking about 30 Mins to import. This appeared to get slower and slower the further through the file it got!
Based on this, I have estimated that the whole file would takle about 13 hours to import. The client say that when they used to run it on version 2007 it was far quicker?
In practice, it does appear to run, but the speed is the issue. Having said this, I set the whole file to run last night (over night)and this morning it had appeared to hang after about 2,307 rows, with nothing else being updated.
Has anyone any ideas or is aware of performance issues like this?
Thanks,
Ian

Always an option, but would you give your clients access to this tool?
Not sure really.
I have uploaded a copy of their database onto my test system and run the same routine. Its equally as SLOW
I can't gauage if its an issue with 8.81 that 2007 didn't have, as I only have the client's word on it, however I have no reason to disbelieve them.
Kind regards,
Ian

Interface and conversion testing of SAP environments with Master Data

Hi guy's
Please let me know if some one of you know about SAP Conversion Project. Below you have more description:
- testing of Interfaces from Legacy Systems
- testing of conversion programs used in the conversion or transposition of data from legacy systems
- data cleansing activities associated with conversion
- identify and populate various SAP environments with Master Data necessary for both conversion and interface testing
Any detail info in that and what kind of knowledge you need to have in some of project will be useful.
Thanks in advance
Adeel

Hi Yannick,
I am trying to do the exact same thing. Have you gotten any further on this issue?

I am having a issue with getting data useage alerts for my iphone 4s

I am having a issue with getting data useage alerts for my iphone 4s from AT&T. I do not download anything huge at all.
I looked into it and figured out that the phone dials out nightly at 12:29am every night. I went into my settings and went to general..about..diagnostics and useage..then diagnostics and useage data to see this. I then clicked don't send...but I am still getting useage alerts. Can anyone help me please...
Thanks

Honestly, from reading the thread linked, they all come off as a bunch of whiney people that cannot be bothered to help themselves.
Little to nothing in that thread indicates an issue beyond inept consumers. Yes, I read several pages on the incessant gripes. Very few made any actual attempts to troubleshoot issues before whining about the "Apple issue" and those that did actual troubleshooting got their issues resolved.
So no, Apple has nothing to fix beyond a few specific devices that are experiencing hardware issues.
If you have actually put forth effort and done the basic troubleshooting, take the device to Apple for evaluation and possible replacement. Whining will get nothing accomplished.

Use of "with master data & with out master data" at DTP update level

Hello experts,
In DTP, I check "with out master data". When I try to send corresponding transactional data, It is showing SID related error. Can anybody suggest what is the use of "with master data & with out master data" at DTP level.
Thanks in advance,
Zakir.

HI
HI in DTP level If you set this indicator, the system terminates the update of the request if no values are available for a data record.
Load the relevant master data before you load the transaction data.
If you set this indicator, the system terminates activation if master data is missing and produces an error message.
If you do not set this indicator, the system generates any missing SID values during activation.
In DataStore maintenance, if you do not set the SIDs Generation upon Activation indicator, the No Update without Master Data indicator in the DTP has no effect.
thx
vijju

How to start with Master data management

Hi All,
I want to start with Master Data Management. Can any one provide me proper material to get the knowledge on Master Data Management Integration. And What is the relationship between XI.and for starting MDM what all settings i have to do???
Its really urget plz help me out.
Thanks,
Seema Khandelwal
Message was edited by:
Seema khandelwal

Hi ..
look at this documents
/people/andreas.seifried/blog/2007/08/30/how-to-use-the-test-environment-of-the-mdm-enrichment-controller
/people/harrison.holland5/blog/2006/11/27/mdm-syndication
/people/harrison.holland5/blog/2007/01/22/testing-and-monitoring-an-interface-between-mdm-xi
see this Wiki to find all the documentation on MDM:
https://wiki.sdn.sap.com/wiki/display/HOME/MasterDataManagement
Here, for the components you need to install:
https://wiki.sdn.sap.com/wiki/display/HOME/MasterDataManagement+Components
Others smart links are here:
- sdn e-learning.
https://www.sdn.sap.com/irj/sdn/mdm-elearning
http://service.sap.com/installMDM for a
you can use expression editor to do that:
have a look at this guide on how dates can be calculated there
with your field it can be very similar:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b025fab3-b3e9-2910-d999-a27b7a075a16
for more details about expression editor:
Calculation Fields chapter
https://websmp108.sap-ag.de/~sapidb/011000358700006291622006E
MDM 5.5 SP05 - ABAP API
https://websmp101.sap-ag.de/~sapidb/011000358700000271902007E
MDM 5.5 SP05 - ABAP API How To Guides (ZIP File)
https://websmp101.sap-ag.de/~sapidb/011000358700000271912007E
How to Identify Identical Master Data Records Using SAP MDM 5.5 ABAP APIs
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e060251e-b58d-2910-02a2-c9a1d60d9116

Issue with 2LIS_02_SCL Data source

Hi Everybody,
I am facing the below 2 issues with 2lis_02_scl data source,
1) This is fetching only the records ETENR (Delivery Schedule Line Counter) value with ' 1 ', It is ignoring others ex:2,3 and 4. Hence Data is not reconciling with ECC system.
2) The standard field GLMNG is not getting any data, Data was existed in table(EKET) level. So i have written the code and data is coming now. But the problem is, This is not considering the ROCANCEL indicator it seems. All the other key figures values are coming in with Negative sign When ROCANCEL Value is ' X ' or ' R ', But this field is getting all the positive values irrespective of ROCANCEL indicator. Hence showing the incorrect values compared to the ECC.
Can anybody help me on this,
Regards,
Gopinath

Hi Gopinath:
Have you already applied any SAP Note to solve this problem?
Please check if the SAP Note below is applicable to your system.
668177 - "LIS BW: wrong quantity for documents with invoice plan"
Regards,
Francisco Milán.

Possibility of combining exception broadcasting with master data bursting

Hi Experts,
We have a scenario where it is required to combine exception broadcasting with master data bursting.
As per my understanding if you choose broadcast method as 'exception broadcasting', there is no option for choosing 'master data bursting'.
Am I missing something or Is there a workaround or some method to achieve the same.
Thanks
Rajeev

Hi,
62 Scheduling: Master data inconsistent Check master data !
Remove "In House Processing Time" from the Material Master MRP2
view. Ensure that the Production Version & Routing are correct. Run
MPS/MRP manually once corrected.
Regards
Sunil

Cannot Load Text Without Cheking the (With Master Data option)

Hi,
Suppose I want to create a Characteristic Infoobject, that will have only <b>text</b> but no attributes or hierarchies.
For that in the Master data/texts tab of the Infoobject definition I checked the WITH TEXTS option but unchecked the WITH MASTER DATA option.
But when I was trying to load the text to the infoobject it was not giving an error. But when I checked the WITH MASTER DATA option I was able to load the text.
Can any one say why this happens, that though we do not want to load attributes, we have to check the with master data option for loading texts only.
Thanks in advance.

Can You tell us the error description..
You donot need to check the master data option..
Texts can be loaded without checking that option..
If you tell us the error message we would be able to help you identify the real cause..
Check for error log in SM37 or ST22
ashish

Transction data loading with master data as key?

Expert's,
I am trying to load the transction data with master data as a key.ZEMPID is my masterdata which having attributes ZEMPNAM and ZEMPDES .My transction data contains ZEMPID.ZEMPSAL and ZEMPAGE.I could create the master data and also load it successfully.But when I tried to create the infosource for trasctional data I should get all the attributes whatever I have given it for the ZEMPID.This I am not getting.Also While creating the cube if I select the infosource then in chraracterstic tab I am not getting my characterstics(master data+attribute).Please any one help me.

Hello Vasu
You are talkin abt transactional data and saying that not created cube/Ods ..
Let me put the things again
1. When you load master data you create infosource ( direct or indirect), All the attribute will be automatically comes in the infosource...when you define application component in master data tab in infoobject maintenance it is ready for data to be loaded. Search for application component in infosource..u will get the flow
2. When you load data in infocube only transactional data goes in it.....master data presents in master data tables...In infosource you define what are the field which need to be present in cube.......so you will be able to include only these objects which are present in cube dimensions + attribute which are defined navigational in the cube....
Master data attribute will never be pushed automatically....only componding object are pushed automatically.....
If you want to load attribute of ZEMPID then make them navigational in cube or add them in one of cubes dimension...
Hope i could make myself clear
Thanks
Tripple k

Assigning InfoObject with Master Data as InfoProvider

Hi,
In BW 3.x we used to assign the InfoObject with Master Data as InfoProvider only if we want to perform Query on that InfoObject.
But in BI 2004's, is it must to assign InfoObject with Master Data as an InfoProvider???
Because when I create the Transformation to load Text or Attribute Data, the system automatically assigs that InfoObject as an InfoProvider.
Is there a way to skip using that InfoObject as an InfoProvider during Tranformation if I do not want to perform any reporting on it.
Thanks,

Hello Sesh,
No. It is not possible.
However for easy grouping, create another infoarea and attach all report relevent infoproviders under this infoarea.
Ravindra

Issue with master data deletion

Similar Messages

Maybe you are looking for