Issue with Master Detail OAF Page

Hi Friends,
I have an issue with the Master-Detaiil Page.
I have developed a Master-detail form in OAF similar to the one in Oracle Forms. The master details are appearing fine. I have created a transient variable selectFlag that represents if the master record is selected. I am also able to see the detailed records after I have written the code in CO to populate the details table when a master is chosen.
But in the detail table I am seeing all the records. I should be able to see only the records that are children for the master record.
I have created the ViewLink as well. How can I pass the id of the master record to the detail table.
Any ideas. Kindly help.
Thanks

Hi,
Are u using partialAction on master form for this ?
You can add parameters from property inspector and put some unique attribute from VO and later filter the details record based on that.
--Sushant

Similar Messages

Developer Mode Error: Stale Data -- Master Detail OAF Page

Dear Members,
I have created a simple master detail OAF Page by following the below steps:-
1/ Created a MasterEO
2/ Created a DetailEO
3/ Created a MasterDetailAO
4/ Created a MasterVO based on MasterEO
5/ Created a DetailVO based on DetailEO
6/ Created a MasterDetailVL (view link) based on MasterDetailAO
7/ Created an AM
7/ Attached the MasterVO and MasterDetailVL to the AM
8/ Created a simple Master Detail Page in which user can enter the master and detail records. After entering the details user can click on the save button.
Code in AM_
public void createHeader()
+{+
OAViewObject vo = getMasterVO1();
if (vo.getFetchedRowCount() == 0)
+{+
vo.setMaxFetchSize(0);
+}+
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
+}+
public void createLines()
+{+
OAViewObject vo = (OAViewObject)getDetailVO1();
if(!vo.isPreparedForExecution())
+{+
vo.setWhereClause("1=2");
vo.executeQuery();
+}+
vo.setWhereClause("1=2");
vo.setWhereClauseParams(null);
vo.executeQuery();
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
+}+
Code in ProcessRequest method of CO_
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("createHeader");
am.invokeMethod("createLines");
I am facing the below error when trying to save the master detail records in the respective OAF Page_
Developer Mode Error: Stale Data_
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The number of displayed records, 1, exceeds the actual number of records, 0, in view object AstfAM.DetailVO1. Some of the displayed records may have been deleted.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
I request the members to help me in resolving the above error.
Many thanks in advance.
Regards,
R4S.

Hi user11991972,
I just faced the same issue and I managed to fixed it using this thread:
Developer Mode Error: Stale Data
In my case, I amended the "Change indicator" checkbox on some of EO attributes.
One of the master attributes was updated by the AM from the detail page, but when navigating back, the master page was not refreshed due to a customer requirement.
But I wonder if it could be of any help in your case...
Regards,
Olivier

Issue with Master Detail relation in OAF page -- Help

Hi,
I am developing an OA page with a master detail relation. The detail records are displayed in the subtab region.
The issue that I am facing is as follows:
If there are 2 detail records in the detail table, then my page is displaying these 2 records twice i.e.
Detail Records:
Header Id Line Id
2 1
3 1
Header Id Line Id
2 1
3 1
If the number of detail record increases, then again the display also increases that many times i.e. 3 records gets displayed thrice.
Kindly help to figure out the issue.
Thanks In Advance.

Hi,
Take the following actions.
1. Try to display your records in simple Table and remove it from subtab,
2. check relations as well, you can delete and re-create all the relations with EOs and VOs and recreate them.
3. Also check when your VO get popluated that how many rows are there in Detail VO ?
For example.
int x = yourViewObject.getRowCount();
System.out.println("Number of rows in detail view Object"+x);
Haroon.

Problem with Master-Detail web page tutorial

My student asked me about this problem:
I just completed the following Master-Detail tutorial...
http://www.oracle.com/technology/products/jdev/collateral/4gl/HO_Workshop/hos1_1/HOS1_1_ADF_Forms_Designer.pdf
... The problem here is that when I try to define Order By CUSTOMER_ID in CustomersView the App Module test and the application both fail...
JBO-30003: The application pool (model.OrderEntryAMLocal) failed to checkout an application module due to the following exception:oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.domain.DataCreationException, msg=JBO-25029: Data class (a domain?) String not found at oracle.jbo.JboException.<init>(JboException.java:343) at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1772) at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2611)
(etc...)
Note that I can define Order By ORDER_ID in OrdersView without problems.

Thanks Frank... I had entered just CUSTOMER_ID as you said. After trying this, the App Module is "permanently" broken. It will not work again even if I remove the Order By entry. I was able to use Order By ORDER_ID successfully in the OrdersView. The Order By is not part of the tutorial, but I wanted to use it because I would if this was a real application.
Message was edited by:
user463505

Urgent please: Master-Deatils OAF Page for enter and Update data

Hi all,
i need your help to build master-details oaf page for Enter / Update data
for example: We have Locations , Department , Employees tables
all these tables on one oaf page (OAAdvancedTable)
when user enter New Location and go to Enter it's Departments and for each department, he can Enter they employees.
and Regarding to Update date:
- when user select Location , Department table fetch all departments and user can update
waiting your support for urgent please
Regards
Hany

i do these Steps :
1- Create LocationEO,DepartmentEO and EmployeesEO
2- Create Association between LocationEO and DepartmentEO with one-to-Many relation (LocToDeptAO)
3- Create Association between DepartmentEO and EmployeesEO with one-to-Many relation (DeptToEmpAO)
4- Create View Object (LocationVO)
5- Create DepartmentVO (and add LocationEO due to LocToDeptAO)
6- Create EmployeesVO (and add DepartmentEO due to DeptToEmpAO)
7- Creare View Link between LocationVO and DepartmentVO (Based On LocToDeptAO) --> LocToDeptVL
8- Creare View Link between DepartmentVO and EmployeesVO (Based On DeptToEmpAO)---> DeptToEmpVL
9- Add LocaionVO to Application Module, then add DepartmentVO Via (LocToDeptVL)
10-Add EmployeesVO to Application Module Via (DeptToEmpVL)
and Then Run Test AM, all data fetch sucessfully, and i can insert data with proper relations
NOw, i want to implement this Business Logic in single oaf Page using 3 OAAdvancedTable (Master - Details -Details )
Regards

Help needed to create a master-detail JSP page using OAF.

I like to create a master-detail JSP page using OAF. If any help or guide will be appreciate.
- Kausik

A Master Detail Page is a basically a game between two VOs(Master and Detail mostly connected through a View Link). You can also have a look at the View Link section in the Dev guide. Page Layouts is one thing which you can take a call yourself.
Regards
Sumit

How to build a screen with master detail data

Hi ,expert ,
Someone can teach me how to build a screen with master detail table ?
I wnat to build a screen for user to maintain FERT group and FERT detail list in one screen .
just like this ..
MASTER Block
FERT1
FERT2
FERT3
DETAIL Block
FERT1A1
FERT1A2
FERT1A3
when I double click FERT1 in the Master Block the detail view will show FERT1A1 A2 A3
Thanks for your help ....
Moderator message : Not enough research before posting. Spec dumping not allowed. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 1:38 PM

An inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
Attachments:
Crude Build Array.PNG ‏4 KB
Better Build Array.PNG ‏6 KB

Populate PK(DBSequence) in three related tables with master detail association

Hi
I use jdeveloper 11.1.1.6.0.
My English isn't very good.
I have 3 tables with master detail association between them and primary key from table A should populate to tables B and finally C .The primary key is a sequence from data base and I set PK attribute in table A as a DBSequence. (table C is the child of table B and table B is the child of table A)
My association is like this: A->B(BAFk1Assoc) and B ->C(CBFk1Assoc) and also I select Composition Association for these two association. And I select ‘Cascade Update Key Attribute’
When I insert row in these three related tables, a negative number create but when I COMMIT the PK populate only to table B not to table C and the exception below raises:
Constraint "C_B_FK1" is violated during post operation "Insert"
ORA-02291: integrity constraint (HR.C_B_FK1) violated - parent key not found.
If I only work with tables A and B, there isn't any problem but if I add table C as the child of B, this exception raises.
Habib

The question is how you create the row for table C. Do you create it as child from table b (using the VO for B and using the link to C)?
In this case the framework should populate the PK of the master row B as FK in table C.
You may need to control the order in which the rows are posted to the DB to avoid this problem. Read Advanced Entity Object Techniques - 11g Release 1 (11.1.1.6.0) to get more info about this.
However, sometimes it's easier to control the generation and setting if the PK attributes in the model layer, not relating on db triggers where you get the real values only after the commit operation is done in the db. For this you can use a Groovy expression so you have access to the PK of each new created row right after creation. Read Using Groovy Expression to set a Primary Key with a Sequence Number | JDev &amp; ADF Goodies to find out how to do this.
Timo

CVC creation - Strange issue with Master data table of 9AMATNR

Hi Experts,
We have encountered a strange issue with Master data table (/BI0/9APMATNR) of info object 9AMATNR.
We have a BADI implemented for checking the valid Characteristic before creation of the CVC using transaction /SAPAPO/MC62. This BADI puts a select on master data tab of material /BI0/9APMATNR and returns no value. But the material actually exists in the table (checked through SE16).
Now we go inside the info object 9AMATNR and go to the Master data Tab. There we go inside the master table
/BI0/9APMATNR and activate that. After activating the table it is read by the select statement inside BADI (Strange) and allows the CVC to be created.
Ideally it should not allow us to activate the SAP standard table /BI0/9APMATNR. I observed that in technical settings of this table it has single record buffering as switched on. (But as per my knowledge buffer gets refreshed every 2 to 4 mins and not in 2 days or something).
Your expert comment is valuable to us. Thanks.
Best Regards,
Chandan Dubey

Hi Chandan,
Try to use a WAIT statment with 5 seconds before your select statment.
I'm not sure whether this will work. Anyway check it and let me know the result.
Regards,
Siva.

Problem with Master -Details forms in seperate pages

Hi ,
Below is the scenario:
I have Institution and a department tables where there is a foreign key relation between the tables. So now i have two entity objects for the 2 tables and 2 view objects(DepartmentView,InstitutionView) from the entity objects.
I also have a view link between them.I made a master-detail relation between them in the datamodel using the view link.So my appmodule now has getters for the department view,institution view and viewlink.
I now have a jsp page "createInstitution.jsp" which contains a form for the institution , i have a "next" button on the same jsp which calls a method in my appmodule class .This methods just inserts the record into the Institution view. In this method i am able to see what the user entered in the form by getting the viewrow record like the below code :
InstitutionViewRowImpl newInstitutionRow=(InstitutionViewRowImpl) getInstitutionView().first();
The next button navigates to the next page "listDepartments.jsp" which contains the list of departments that are added. This page has a button "Add Department" which takes to to the "addDepartment.jsp" page which shows a form for adding a department. This page also has a button which calls a method in app module class. The method just inserts the record into the view(DepartmentView)
Here when i say
DepartmentViewRowImpl newDepartmentRow=(DepartmentViewRowImpl ) getDepartmentView().first();
the newDepartmentRow is null.
Also on the addDepartment.jsp form , i had used a output field to see what the parent id was and interestingly the parent id is 75 which is first institution in the database. It should have been "-10" , a temporary id assigned.
Can someone please tell me what is the problem with my approach?

I don't understand why you are using a method on your button to insert the record into the table - An Oracle ADF Form will do the insert for you by default without any coding.
See the create pages in these tutorials:
http://www.oracle.com/technology/products/jdev/11/cuecards/adf_set_21/ccset21_ALL.html
http://www.oracle.com/technology/obe/obe11jdev/11/dev_ui/developuserinterface.html#t2s5
The method that you are calling just returns the first record in the rowset - I don't see how it has anything to do with actually inserting the data into the table.

OBIEE 11g: Inconsistencies with Master-Detail events and Navigate to BI

Hi everyone,
I'm getting some pretty annoying inconsistencies with the Navigate to BI Content action as well as the Master-Detail events. Basically the main issue I get is that 90% of the time, the click does nothing.
It's a pretty simple setup, I am setting up bulb gauges to act like a fancy column selector. The bulb gauges are setup to pivot based on a Metric Type column. The goal is that if you click on "Metric 1" bulb a trend report should refresh to show Metric 1. If you click on the "Metric 2" bulb, the same trend report will show that metric.
Here's how I implemented it:
Dashboard Tab A -- Uses Navigate to BI Content
1) I have a prompt on Fiscal month in dashboard tab A.
2) I created the bulb gauge and put it in dashboard tab A
3) Setup the interaction on the bulb measure to navigate back to Dashboard Tab A.
3) Prompted the trend on Metric Type column and put it in dashboard tab A.
4) In theory, clicking on the bulb, should navigate back to the same tab and update the trend report appropriately
5) In reality, nothing happens.
6) The only way I can get the navigate to work is if I first change the value in the fiscal month prompt and click Go. Then I click on the bulb and the navigation will work ONCE. After that it's broken again.
Dashboard Tab B -- Use Master Detail -Events
1) Pretty much same situation as dashboard A, but instead of navigate to BI Content, I use the master-detail events.
2) Pretty much the same results. I cannot get it to consistently work, in fact the trick with the filter didn't do anything.
3) One thing I tried was cleared my browser history completely (Mozilla Firefox) and then launched the page. It work for about 5 clicks and then stopped.
Either way, neither of these are working properly for me.
Has anyone else had these issues?
-=Joe
Has anyone else had an issue with this?

So someone explained to me that master-detail events only occur within a single report. They cannot be used to communicate across two different reports.
That is significantly less useful than I originally thought. I honestly that it was a method of communication for one report to update other target reports that are all listening on the same channel. That would have been a powerful feature. A single report refreshing other views in the same report is still useful, but not as much.
That being said, I still don't understand what the heck is going on with the navigate to BI content feature. I've been testing it out. It works with pivot tables and regular tables. But the moment I add a graph, gauge or even a "Filter" view into the dashboard page, the click stops working. Really really strange stuff.

Regarding the issue with mater-detail table rows

Hi,
I am using Jdeveloper 11.1.2.1.0
I have a master - detail relationship based read-only tables in a page.
When i execute the master view using the bind variables , I also use a stored procedure to generate additional values to detail view rows using the master row values,
the selection in master table is at index zero for which the detail table row is not appearing. Once user select the next row for which detail row appears, then clicks the first master row , then only the first row's respective detail row appears.
I have tried using triggers and also tried to queue the selection event using row key values after master view execution and procedure call.
Give an idea to solve this issue.
- Ramey

Hi,
Then what can be the solution if it is the refresh timing ?
I tried to execute detail view with same bind variable as in view link along with view link execution,
assuming that master's first row is not set as current row to get the detail row based on the default first row selection in master view can trigger detail view .
Kindly suggest a possible solution.
-Ramey

Detail-Disclosure problem with Master- Detail VO

Hi,
I have UIX pages based on Master - Detail VO, detail data being shown when you press Detail button on the left, detail data display in the BC4J Table correctly, but I am able to update only the last record of the rowset. when I click on the first master detail and press update button i get Null Pointer Exeception error and other problem is that my detail data has sorted headers, when i click on the sorted column header, it close the Detail portion on the Table.
Here is UIX page listing, please any one review the code and let me what is wrong
Thanks
View Page
<?xml version="1.0" encoding="windows-1252" ?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:bc4j="http://xmlns.oracle.com/uix/bc4j"
xmlns:html="http://www.w3.org/TR/REC-html40"
xmlns:viewpage="http://www.example.org/siriusbilling/templates">
<ctrl:head xmlns="http://www.w3.org/TR/REC-html40">
<title>View Properties</title>
</ctrl:head>
<templates xmlns="http://xmlns.oracle.com/uix/ui">
<templateImport source="templates/SiriusBilling.uit"/>
</templates>
<bc4j:registryDef>
<bc4j:rootAppModuleDef name="PropertiesForeignKeyLink1AppModule"
definition="siriusbilling.SiriusBCModule"
releaseMode="stateful" >
<bc4j:viewObjectDef name="PropertyTypesMasterView"
rangeSize="2" />
<bc4j:viewObjectDef name="PropertiesDetailView"
rangeSize="5" />
</bc4j:rootAppModuleDef>
</bc4j:registryDef>
<ctrl:content xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui">
<viewpage:siriusPageLayout>
<pageHeader>
<globalHeader selectedIndex="0">
<contents>
<link text="View Properties" />
</contents>
</globalHeader >
</pageHeader>
<contents>
<try xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui" >
<catch>
<displayException />
</catch>
<contents>

<messageBox automatic="true" />
<bc4j:rootAppModuleScope name="PropertiesForeignKeyLink1AppModule" >
<contents>
<header text="Properties Search" >
<contents>
<form name="search" method="POST" >
<contents>
<inlineMessage prompt="Search by:" vAlign="middle" >
<contents>
<bc4j:viewObjectScope name="PropertiesDetailView" >
<contents>
<flowLayout>
<contents>
<choice name="attrName"
data:selectedValue="attrName@ctrl:page"
shortDesc="Search Column">
<contents>
<option text="Property Id" value="PropertyId" />
<option text="Property Name" value="PropertyName" />
<option text="Property Description" value="PropertyDescription" />
<option text="Unit Of Measure" value="UnitOfMeasure" />
</contents>
</choice>
<textInput prompt="Criteria" name="attrValue" columns="20"
data:text="attrValue@ctrl:page"
shortDesc="Search Criteria for Propeties"/>
</contents>
</flowLayout>
</contents>
</bc4j:viewObjectScope>
</contents>
<end>
<submitButton text="Go" ctrl:event="search" />
</end>
</inlineMessage>
</contents>
</form>
</contents>
</header>
<spacer width="10"/>
<separator />
<header text="Property Types" >
<contents>
<form name="viewForm" method="POST" >
<contents>
<bc4j:viewObjectScope name="PropertyTypesMasterView" >
<contents>
<bc4j:table name="viewPropertyTypeTable" automatic="false"
width="100%" alternateText="No rows found"
formSubmitted="true"
partialRenderMode="self"
data:detailDisclosure="tableDetails@ctrl:eventResult">

<bc4j:keyStamp>
<bc4j:rowKey name="key" />
</bc4j:keyStamp>
<contents>


<bc4j:column attrName="PropertyType">
<columnHeader>
<bc4j:sortableHeader text="Property Type"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
<bc4j:column attrName="TableName">
<columnHeader>
<bc4j:sortableHeader text="Table Name"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
<bc4j:column attrName="Comments" >
<columnHeader>
Comments
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
</contents>
<detail>
<flowLayout>
<contents>
<header text="Properties Detail">
<contents>
<spacer width="10"/>
<bc4j:viewObjectScope name="PropertiesDetailView" >
<contents>

<bc4j:table name="viewTable" automatic="false"
width="100%" alternateText="No rows found"
formSubmitted="true"
partialRenderMode="self">
<tableSelection>

<singleSelection selectedIndex="0" text="Select Row and ...">
<contents>
<submitButton text="Create" ctrl:event="create" />

<submitButton text="Update"
ctrl:event="update" />

<submitButton text="Delete"
ctrl:event="delete" />
</contents>
</singleSelection>
</tableSelection>

<bc4j:keyStamp>
<bc4j:rowKey name="key" />
</bc4j:keyStamp>
<contents>

<bc4j:column attrName="PropertyId">
<columnHeader>
<bc4j:sortableHeader text="Property Id"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
<bc4j:column attrName="PropertyName">
<columnHeader>
<bc4j:sortableHeader text="Property Name"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
<bc4j:column attrName="PropertyDescription">
<columnHeader>
<bc4j:sortableHeader text="Property Description"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
<bc4j:column attrName="UnitOfMeasure">
<columnHeader>
<bc4j:sortableHeader text="Unit of Measure"/>
</columnHeader>
<contents>
<bc4j:input readOnly="true"/>
</contents>
</bc4j:column>
</contents>
</bc4j:table>
</contents>
</bc4j:viewObjectScope>
<formValue name="disclosed" value="true" />
</contents>
</header>
</contents>
</flowLayout>
</detail>
</bc4j:table>
</contents>
</bc4j:viewObjectScope>
</contents>
</form>
</contents>
</header>
</contents>
</bc4j:rootAppModuleScope>
</contents>
</try>
</contents>
</viewpage:siriusPageLayout>
</ctrl:content>
<handlers>
<event name="search" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertiesDetailView" >

<bc4j:findByExample>
<bc4j:exampleRow ignoreCase="true" >
<bc4j:exampleAttribute>
<bc4j:nameBinding><bc4j:parameter name="attrName" /></bc4j:nameBinding>
<bc4j:valueBinding><bc4j:parameter name="attrValue" /></bc4j:valueBinding>
</bc4j:exampleAttribute>
</bc4j:exampleRow>
</bc4j:findByExample>
<bc4j:executeQuery/>

<bc4j:setPageProperty name="attrName" >
<bc4j:parameter name="attrName" />
</bc4j:setPageProperty>
<bc4j:setPageProperty name="attrValue" >
<bc4j:parameter name="attrValue" />
</bc4j:setPageProperty>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="first" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:first/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="previous" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:previous/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="next" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:next/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="last" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:last/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="sort" source="viewTable" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertiesDetailView" >

<bc4j:sort/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="sort" source="viewPropertyTypeTable" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:sort/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="goto" source="viewPropertyTypeTable" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertyTypesMasterView" >

<bc4j:goto/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="goto" source="viewTable" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertiesDetailView" >

<bc4j:goto/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
<event name="create" >

<ctrl:go name="InsertProperties" redirect="true" />
</event>
<event name="update" >

<ctrl:go name="UpdateProperties" redirect="true" >
<ctrl:property name="key" >
<ctrl:selection name="viewTable" key="key" />
</ctrl:property>
</ctrl:go>
</event>
<event name="delete" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertiesDetailView" >

<bc4j:findRowByKey>
<bc4j:keyBinding>
<bc4j:selectionKey name="viewTable" key="key" />
</bc4j:keyBinding>
<bc4j:handlers>

<bc4j:removeRow />

<bc4j:executeQuery/>
</bc4j:handlers>
</bc4j:findRowByKey>
</bc4j:findViewObject>

<bc4j:commit/>
</bc4j:findRootAppModule>
</event>
<event name="show">
<method class="servlet.showDetails" method="doHideShowEvent" />
</event>
<event name="hide">
<method class="servlet.showDetails" method="doHideShowEvent" />
</event>
</handlers>
</page>
Update View
<?xml version="1.0" encoding="windows-1252" ?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:bc4j="http://xmlns.oracle.com/uix/bc4j"
xmlns:html="http://www.w3.org/TR/REC-html40"
xmlns:updatepage="http://www.example.org/siriusbilling/templates">
<ctrl:head xmlns="http://www.w3.org/TR/REC-html40">
<title>Update Properties</title>
</ctrl:head>
<templates xmlns="http://xmlns.oracle.com/uix/ui">
<templateImport source="templates/SiriusBilling.uit"/>
</templates>
<bc4j:registryDef>
<bc4j:rootAppModuleDef name="PropertiesForeignKeyLink1AppModule"
definition="siriusbilling.SiriusBCModule"
releaseMode="stateful" >
<bc4j:viewObjectDef name="PropertiesDetailView" >
<bc4j:rowDef name="UpdatePropertiesDetailView" autoCreate="false" usesCurrency="true">
<bc4j:propertyKey name="key" />
</bc4j:rowDef>
</bc4j:viewObjectDef>

<bc4j:viewObjectDef name="PropertyTypesView" rangeSize="20" >
<bc4j:rowDef name="UpdatePropertyTypesView" autoCreate="false">
<bc4j:propertyKey name="key" />
</bc4j:rowDef>
</bc4j:viewObjectDef>
</bc4j:rootAppModuleDef>
</bc4j:registryDef>
<ctrl:content xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui">
<updatepage:siriusPageLayout>
<pageHeader>
<globalHeader selectedIndex="0">
<contents>
<link text="Update Property" />
</contents>
</globalHeader >
</pageHeader>
<contents>
<try xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui" >
<catch>
<displayException />
</catch>
<contents>
<switcher childName="default">
<boundAttribute name="childName">
<if>
<comparison type="equals">
<dataObject select="key" source="ctrl:page"/>
<dataObject source="ui:null"/>
</comparison>
<fixed text="error"/>
</if>
</boundAttribute>
<case name="error">
<header text="Required page property 'Property Type' missing. Cannot display page."/>
</case>
<case name="default">
<flowLayout>
<contents>

<messageBox automatic="true" />
<script>
<contents>
function UOMLovCallBack(lovwin, event)
var value = lovwin.returnUOMValue;
if (value!=(void 0))
document.updateForm.UnitOfMeasure.value = lovwin.returnUOMValue;
</contents>
</script>
<form name="updateForm" method="POST" >
<contents>

<formParameter name="event" />

<spacer width="10"/>
<tableLayout width="80%"
cellPadding="2"
hAlign="center">
<contents>
<bc4j:rootAppModuleScope name="PropertiesForeignKeyLink1AppModule" >
<contents>
<bc4j:viewObjectScope name="PropertiesDetailView" >
<contents>
<bc4j:rowScope name="UpdatePropertiesDetailView" >
<contents>
<bc4j:messageChoice prompt="Property Type" attrName="PropertyType" name="PropertyType">
<contents>
<bc4j:optionList voName="PropertyTypesView" attrName="PropertyType" textAttributeName="PropertyType" size="30"/>
</contents>
</bc4j:messageChoice>
<bc4j:messageInput prompt="Property Id" vAlign="left" attrName="PropertyId" size="30"/>
<bc4j:messageInput prompt="Property Name" attrName="PropertyName" size="30"/>
<bc4j:messageInput prompt="Property Description" attrName="PropertyDescription" size="30" />
<bc4j:messageLovField prompt="Unit Of Measure"
attrName="UnitOfMeasure"
name="UnitOfMeasure"
onClick="openWindow(window,
'UOMLov.uix',
'lovwin',
{width:480, height:300},
true,
'dialog',
UOMLovCallBack);
return false;" />
</contents>
</bc4j:rowScope>
</contents>
</bc4j:viewObjectScope>
</contents>
</bc4j:rootAppModuleScope>
</contents>
</tableLayout>
</contents>
</form>
</contents>
<contents>
<contentFooter>
<contents>
<html:center>

<pageButtonBar>
<contents>

<button text="Cancel" ctrl:event="cancel" />

<submitButton text="Update" formName="updateForm"
ctrl:event="apply" />
</contents>
</pageButtonBar>
</html:center>
</contents>
</contentFooter>
</contents>
</flowLayout>
</case>
</switcher>
</contents>
</try>
</contents>
</updatepage:siriusPageLayout>
</ctrl:content>
<handlers>
<event name="cancel" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:rollback/>

<ctrl:go name="ViewProperties" redirect="true" />
</bc4j:findRootAppModule>
</event>
<event name="apply" >

<bc4j:findRootAppModule name="PropertiesForeignKeyLink1AppModule" >

<bc4j:findViewObject name="PropertiesDetailView" >

<bc4j:findRow name="UpdatePropertiesDetailView" >

<bc4j:setAttribute name="PropertyId" />
<bc4j:setAttribute name="PropertyType" />
<bc4j:setAttribute name="PropertyName" />
<bc4j:setAttribute name="PropertyDescription" />
<bc4j:setAttribute name="UnitOfMeasure" />

<bc4j:commit/>
<bc4j:executeQuery/>

<ctrl:go name="ViewProperties" redirect="true" />
</bc4j:findRow>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
</handlers>
</page>

I think the detailDisclosure state needs to be saved and retrieved from the session.
I'm not sure using a table with singleSelection inside a detail disclosure is supported. Are you doing master-detail inside of detail disclosure? Detail disclosure is not really meant for that. In jdev 10g preview we make hooking up a master-detail easy. Here's a link to some doc about it.
http://otn.oracle.com/products/jdev/collateral/tutorials/9050/adfuix_tut.html#Create%20a%20Master-Detail%20page

Issue with attachment in OAF

Hi All,
I have a issue with attachment functionality in OAF,
I have a custom OAF page, in the header part of the page i have one attachment button there i am attaching a file, so i am able to attach the file the issue is.
when the page loads for the first time it will populate a sequence in one of the field in the page , but when i am clicking the add attachment button i am able to aatched a file but the sequence getting chnaging, but i need the same sequence wht it was displayed during first page loads, so how i can restict page refreshing in attachment functionaly so that i can store the attachment file in the same sequence number what it was populared first time, please help me on this.
Thnaks

I could able to solve the issue by using the above code in an if else statement, in process request i kept
like below:
if (aFlag.equals("attachment")) {
am=(OAApplicationModule)pageContext.getSessionValueDirect("xxretainAM");
else
rest of my code in process request
Thnaks

Apex - Error in Checksum in Master-Detail Form Page

The following error message is thrown in a Page with a Master-Detail Form in Apex ,
ORA-20505: Error in DML: p_rowid=362, p_alt_rowid=ID, p_rowid2=, p_alt_rowid2=. ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "71064C738DA3DADD5500149404378CFF" application checksum = "0"
Error Unable to process row of table "table-name".
Somebody can tell me what is happening ? Thanks.

Please check this thread ORA-20505: Error in DML : ORA-20503: . There is a detailed discussion on the same error.

Issue with Master Detail OAF Page

Similar Messages

Maybe you are looking for