Issue with Memory in SAP(R/3 3.1I )/OS (AIX 5.2)

Hi

We have problem with the memory settings in SAP(R/3 3.1I )/OS (AIX 5.2). One of the customizing ABAP program failing at background but works fine when we run with same variant in forgeground.


Below are the current parameters values in system

em/initial_size_MB 1024 
ztta/roll_first 1024 
ztta/roll_area 7000064 
rdisp/ROLL_SHM 6528 
rdisp/ROLL_MAXFS 23040 
rdisp/PG_SHM 5120 
rdisp/PG_MAXFS 34560 
abap/heap_area_dia 188743680 
abap/heap_area_nondia 400556032 
abap/heap_area_total 838860800 
abap/heaplimit 52428800 
abap/swap_reserve 20971520 
ztta/roll_extension 200068300 
em/blocksize_KB 1024 
em/stat_log_size_MB 40 
em/stat_log_timeout 600 
ipc/shm_psize_01 -10 
ipc/shm_psize_02 -40 
ipc/shm_psize_03 -10 
ipc/shm_psize_04 -10 
ipc/shm_psize_06 -40 
ipc/shm_psize_07 -10 
ipc/shm_psize_08 -10 
ipc/shm_psize_09 -10 
ipc/shm_psize_10 276000000 
ipc/shm_psize_31 -10 
ipc/shm_psize_33 -10 
ipc/shm_psize_34 -10 
ipc/shm_psize_40 688000000 
ipc/shm_psize_51 -10 
ipc/shm_psize_52 -10 
ipc/shm_psize_54 -10 

I have checked at os level with below command, Its shows there is problem at ipc/shm_psize_10 :276000000
ipc/shm_psize_40 : 688000000 but the current values are higher then what the below recomands. Can you plz suggest me the correct values for the above parameters. If any problems with above parameters.


witco-12:ncpadm 1> sappfpar check pf=NCP_DVEBMGS00_WITCO-12

sapparam(2): fopen("NCP_DVEBMGS00_WITCO-12","r"): No such file or directory
No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
================================================================================
== Checking profile:
================================================================================

***ERROR: Size of shared memory pool 10 too small
================================================================================
SOLUTION: Increase size of shared memory pool 10 
 with parameter: ipc/shm_psize_10 =36000000 
***ERROR: Size of shared memory pool 40 too small
================================================================================
SOLUTION: Increase size of shared memory pool 40 
 with parameter: ipc/shm_psize_40 =50000000 
Shared memory disposition overview 
================================================================================
Shared memory pools 
Key: 10 Pool 
 Size configured.....: 12000000 ( 11.4 MB) 
 Size min. estimated.: 31988070 ( 30.5 MB) 
 Advised Size........: 36000000 ( 34.3 MB) 
Key: 40 Pool for database buffers 
 Size configured.....: 14250000 ( 13.6 MB) 
 Size min. estimated.: 47166184 ( 45.0 MB) 
 Advised Size........: 50000000 ( 47.7 MB) 
Shared memories inside of pool 10 
Key: 1 Size: 2000 ( 0.0 MB) System administration 
Key: 3 Size: 13100000 ( 12.5 MB) Disp. communication areas 
Key: 4 Size: 100000 ( 0.1 MB) statistic area 
Key: 7 Size: 14838 ( 0.0 MB) Update task administration 
Key: 11 Size: 500000 ( 0.5 MB) Factory calender buffer 
Key: 12 Size: 120000 ( 0.1 MB) TemSe Char-Code convert Buf. 
Key: 13 Size: 500000 ( 0.5 MB) Alert Area 
Key: 14 Size: 4400000 ( 4.2 MB) Presentation buffer 
Key: 16 Size: 22400 ( 0.0 MB) Semaphore activity monitoring 
Key: 17 Size: 65636 ( 0.1 MB) Roll administration 
Key: 18 Size: 65636 ( 0.1 MB) Paging adminitration 
Key: 19 Size: 6000000 ( 5.7 MB) Table-buffer 
Key: 31 Size: 1806000 ( 1.7 MB) Dispatcher request queue 
Key: 33 Size: 2048000 ( 2.0 MB) Table buffer, part.buffering 
Key: 51 Size: 3200000 ( 3.1 MB) Extended memory admin. 
Key: 52 Size: 20000 ( 0.0 MB) Message Server buffer 
Key: 54 Size: 16384 ( 0.0 MB) Export/Import buffer 
 
Shared memories inside of pool 40 
Key: 2 Size: 961296 ( 0.9 MB) Disp. administration tables 
Key: 6 Size: 26112000 ( 24.9 MB) ABAP program buffer 
Key: 41 Size: 6010000 ( 5.7 MB) DB statistics buffer 
Key: 42 Size: 596968 ( 0.6 MB) DB TTAB buffer 
Key: 43 Size: 3898344 ( 3.7 MB) DB FTAB buffer 
Key: 44 Size: 1850344 ( 1.8 MB) DB IREC buffer 
Key: 45 Size: 1338344 ( 1.3 MB) DB short nametab buffer 
Key: 46 Size: 20480 ( 0.0 MB) DB sync table 
Key: 47 Size: 3072000 ( 2.9 MB) DB CUA buffer 
Key: 48 Size: 300000 ( 0.3 MB) Number range buffer 
Key: 49 Size: 3000000 ( 2.9 MB) Spool admin (SpoolWP+DiaWP) 
 
Shared memories outside of pools 
Key: 1002 Size: 400000 ( 0.4 MB) Performance monitoring V01.0 
Key: 58900100 Size: 4096 ( 0.0 MB) SCSA area 
Nr of operating system shared memory segments: 4 
Shared memory resource requirements estimated 
================================================================ 
Nr of shared memory descriptors required for 
Extended Memory Management (unnamed mapped file).: 1 
 
Total Nr of shared segments required.....: 5 
System-imposed number of shared memories.: 11 
Shared memory segment size required min..: 36000000 ( 34.3 MB) 
System-imposed maximum segment size......: 3489660928 (3328.0 MB) 
R/3-imposed maximum segment size.........: 2147483647 (2048.0 MB) 
 
Swap space requirements estimated 
================================================ 
Shared memory....................: 86.2 MB 
..in pool 10 11.4 MB, 266% used !! 
..in pool 40 13.6 MB, 330% used !! 
..not in pool 0.4 MB 
Processes........................: 30.9 MB 
Extended Memory .................: 128.0 MB 
 
Total, minimum requirement.......: 245.1 MB 
Process local heaps, worst case..: 762.9 MB 
Total, worst case requirement....: 1008.1 MB 
 
Errors detected..................: 2 
Warnings detected................: 0 

Edited by: Sambireddy Authu on Jan 19, 2011 1:47 PM
Edited by: Sambireddy Authu on Jan 19, 2011 1:49 PM

Hi APR, 
I have checked sm21, St22 and dev_wp<no> file at OS level but I am not finding the exact error . 
Tue Jan 18 15:15:29 2011 
A WP has reached abap/heaplimit = 52428800 bytes 
Tue Jan 18 15:15:37 2011 
M -
C-STACK -
 
NONAME at 0x103804cc 
NONAME at 0x103806e4 
NONAME at 0x1046a02c 
Signal 0 in M -
 
M ***LOG Q0E=> DpSigGenHandler, signal ( 4) [dpuxtool 0501] 
M ThSigHandler: signal (step 4) 
M Modeinfo for User T17/M0 
M tm state = 2 
M uid = 18 
M term type = 0x0 
M display = 0x0 
M cpic_no = 0 
M cpic_idx = -1 
M usr = >GONUGRA < 
M terminal = > < 
M client = >088< 
M convid = > < 
M appc_tm_conv_idx = -1 
M imode = 2 
M mode state = 0x42 
M th_errno = 0 
M async_receives = 0 
M cpic_receive = 0 
M em handle = 4 
M roll state = 2 
M abap state = 2 
M em state = 3 
M eg state = 1 
M spa state = 3 
M enq state = 0 
M next hook = T-1/U-1/M255 
M master hook = T-1/U-1/M255 
M slave hook = T-1/U-1/M255 
M debug_tid = -1 
M mode type = 0x1 
M debug = 0 
M tcode = > < 
M client convid = > < 
M server convid = > < 
M lock = 0 
M max enq infos = 0 
M act enq infos = 0 
M
M ***************************************************************************** 
M * 
M * LOCATION SAP-Server witco-10_NCQ_00 on host witco-10 (wp 17) 
M * ERROR ThSigHandler: signal 
M *
M * TIME Tue Jan 18 15:15:37 2011 
M * RELEASE 31I 
M * COMPONENT Taskhandler 
M * VERSION 1 
M * RC 11 
M * MODULE thxxhead.c 
M * LINE 7209 
M * COUNTER 103 
M *
M ***************************************************************************** 
M
M ***LOG R68=> ThIRollBack, roll back () [thxxhead 9123] 
M ***LOG R68=> ThIRollBack, roll back () [thxxhead 9123] 
X <ES> RecoverAll 
X <ES> RecoverFreeList 
X <ES> RecoverAll 
X <ES> RecoverFreeList 
A 
A ** RABAX: could not save part LEV_SN_DATA_ENV of dump. 
A 
A Tue Jan 18 15:15:38 2011 
A 
A ** RABAX: could not save part LEV_SN_ITABS of dump. 
M ***LOG Q02=> wp_halt, WPStop (Workproc17 60272) [dpuxtool 0773] 
 
trc file: "dev_w17", trc level: 1, release: "31I" 
 
* 
ACTIVE TRACE LEVEL 1 
ACTIVE TRACE COMPONENTS all, M 
* 
M ***LOG Q01=> tskh_init, WPStart (Workproc17 2 19746) [thxxhead 0898] 
M calling db_connect ... 
B Try to connect as default user 
B Using SQL-Net V2 with tnsname = 'NCQ' 
B No TNS_ADMIN in environment 
B Setting TNS_ADMIN to '/usr/sap/trans' (profile-parameter DIR_TRANS) 
B Got 'NCQ' for SID from profile-parameter 'rsdb/oracle_sid' 
B Connecting via TNS_ADMIN=/usr/sap/trans, tnsname=NCQ 
B Got NLS_LANG=AMERICAN_AMERICA.US7ASCII from environment 
B 
B Tue Jan 18 15:15:40 2011 
B Now I'm connected to ORACLE 
B Database instance NCQ is running on witco-10 with ORACLE version 8.1.7.4.0 
M db_connect o.k. 
X <ES> client 17 initializing .... 
X ES initialized. 
A Attached to PXA (address 63026e00, size 621972496) 
S frontend print server enabled 
S Form-Textpool enabled (TSP06T has 4 fields) 
S OMS support enabled (TSPLOMS has 13 fields, TSPROMS has 8 field) 
M ThCheckPrevUser: clean previous user T17/U18/M0 
M Modeinfo for User T17/M0 
M tm state = 2 
M uid = 18 
M term type = 0x0 
M display = 0x0 
M cpic_no = 0 
M cpic_idx = -1 
M usr = >GONUGRA < 
M terminal = > < 
M client = >088< 
M convid = > < 
M appc_tm_conv_idx = -1 
M imode = 2 
M mode state = 0x42 
M th_errno = 11 
M async_receives = 0 
M cpic_receive = 0 
M em handle = 4 
M roll state = 2 
M abap state = 2 
M em state = 3 
M eg state = 1 
M spa state = 3 
M enq state = 0 
M next hook = T-1/U-1/M255 
M master hook = T-1/U-1/M255 
M slave hook = T-1/U-1/M255 
M debug_tid = -1 
M mode type = 0x1 
M debug = 0 
M tcode = > < 
M client convid = > < 
M server convid = > < 
M lock = 0 
M max enq infos = 0 
M act enq infos = 0 
M ***LOG R47=> ThResFree, delete (001023) [thxxmode 0780] 
B
B Tue Jan 18 15:22:09 2011 
B dbtran INFO (initialize_tran): 
B maxblocking_factor = 25, 
B minblocking_factor = 10, 
B maxin_blocking_factor = 254, 
B minin_blocking_factor = 10, 
B preferunion_all = 0, 
B preferunion_for_views = 0, 
B preferin_itab_opt = 0, 
B preferfix_blocking = 0, 
B usehints = 0, 
B optgele_to_between = 0, 
B convafter_aggregat = 0, 
B allowNULL_for_agg = 0, 
B rownumfor_count = 1

Similar Messages

CR2008 connectivity issue with BOE Universes(sap and non sap universes)

Hi Experts !!
Recently we tried to build/connect to a Universe in Crystal Reports2008 via 'Make a new connection tab'.
The universes are of SAP BW or non SAP Lying in BOE Servers and we are trying to build reports on them by conncting/utilizing the universes as a database for Crystal Reporting.
Our issue is most of the time we are not able to connect to the Universes and the connectivity blows out by some 'communication Error' thing initially.
While at some other points in time, the connectivity takes us to the Universe and we are able to select few characteristics and key figures from the Universe but the moment we go futher and try to run by pressing 'OK' button it blows out and say' LOGON FAILED'.
Apparantly, it is an connectivity issue with BOE server and from the different blogs it looks like it is a known issue for long.
The proposed issue resolution were like either CR2008 should be SP2 with BOE SP3 or there should be some additional .dll files defined in the paths in case of MSSQL database. None of this applies to us as we are on CR2008 with SP3 and going back to SP2 is probably not a viable option for us, and we are using Oracle as underlying database in this specific case.( i would like to tell you here that we are able to connect to Oracle Database directly though).
We have raised a message with SAP and was just wondering if we do have some solution/workaround already available to this known issue in place please?
Thanks&Regards.
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:41 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:44 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 3:14 PM

Hi Amit,
Moved to Universe Forum.
If you have a case logged then no point posting here also, this is a public site and not a case management tool.
Once you do get the solution from your case please post it here also to help others if they have the same problem.
Thank you
Don

Issue with superadmin user (sap*) in portal

Hi,
I have issue with my superadmin user (SAP*) in portal system.
When I activated superadmin user (sap) from configtool and tried to login to the system with sap it is not letting me to enter into portal instead it is asking whether I am new user and also giving me link for "register user".
Please suggest.
Regards,
Chandra.

Hi Chandra,
I hope you performed all steps as discussed in the below link. Please cross check.
http://help.sap.com/saphelp_nw70/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/content.htm
Thanks,
Siva Kumar

VERY URGENT: Issue with Reconciliation against SAP Enterprise Portal

Hi,
We are using IDM7.0 and we have SAP Enterprise Portal as a resource. The users in portal are from Active Directory.
When I am doing full reconciliation against portal, it is processing only certain accounts. The reconcilaition policy is to link accounts. It is not linking teh accounts. Moreover, these accounts are not found in UNMATCHED accounts also. I don't have any account exclusion rules or something.
I wrote a small code snippet, which does just a single account reconciliation of a particular user id. In this case the portal account is being reconciled and linked properly.
Any ideas what the issue might be?
And I have another question too.. in the schema attributes of the out-of-box SAP Portal resource adapter, I don't see any ammping entry for "accountId". Usually for other resource adapters there would be entry for accountId (e.g in AD, mapping is: accountId <---> sAMAccountName). In case of portal, do we need to explicitly set this mapping? If so what would be the right hand side name in the schema? Does the right hand side name changes from one deployment to the other? If so how to determine what attribute maps to accountId in our portal? Might this lack of accountId is causing the issue with the reconciliation?
Any leads would be highly appreciated.
Thanks,
kIDMan.

Thanks for the reply. I have already set up correlation rule, account linking options for different situations like FOUND, UNASSIGNED, UNMATACHED etc. If my linking configurtaion is not correct then the fetched accounts should be atleast in the account index with situation as UNMATCHED. But that is not the case.
I am not sure if I made my problem difinition clear earlier. The problem I mentioned is not with "linking" of the accounts. The problem is IDM is detecting only some accounts. Among those set of accounts which IDM was able to fetch from portal during reconcilaition, it was able to successfully link the matching accounts to identities in IDM.
My question is, why IDM is fetching only certain accounts and not all accounts from portal resource.
As I mentioned earlier, when I run my code snippet to reconcile a single account, it reconciles successfully and links to user identity in IDM (if a matching idenity exists based on my correlation rule). But why the reconcilaition at the resource level is not able to fetch and reconcile teh same account.
Regarding the accountId attribute in the attribute schema, neither the SUN documentation nor the resource adapter configuration tells about the name of the attribute on the portal side that it should match to.
Thanks,
kIDMan.

Issue with memory when trying to do a restore on iPad 2

I'm had a few issues with my iPad and am trying to do a restore, I start OK but then after a while I get a "can not be restore. The disk you are attempting to use is full" the PC I am using does not have a large C drive and space is limited but I do have a large external drive attached with loads of space. Is there any method of using the external hard drive when restoring?
I hope this makes sence, iPad now been down for over a week and issues getting me down.

The restore must be done within iTunes on your PC while iTunes is running so - No - you cannot restore using the external drive. You might try moving some of the stuff on your C drive to the external drive to free up space and then restore your iPad.

Issue with Infoset of sap query

Hi All,
There is an existing 'z' Sap query and the inofet is created using the data source 'Data retreival by program'(Data structure:BAPIEXPLOSIONLIST).
I got the requirement to add onemore radiobutton(for Costing Run) to the selection screen of exsiting query and when the radio button is clicked on, it should display two more fields (Costing Run name and Costing Run date).So,I have added the below lines in the existing Infoset.
1.Under the extras button and in data read program tab,I have added the below code for radio button and the two fields for selection.
PARAMETERS p_cstrun LIKE jest-inact RADIOBUTTON GROUP cost.
SELECT-OPTIONS sp_kaid FOR keko-kalaid MODIF ID s1.
SELECT-OPTIONS sp_kadt FOR keko-kaladat MODIF ID s1.
2.Under the extras button and in code tab and in at seletion-screen output,I have added the below logic to enable those fields dynamically.
LOOP AT SCREEN.
    IF p_CSTRUN EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
      screen-invisible = 0.
      screen-active = 1.
      MODIFY SCREEN.
      elseif p_CSTRUN NE 'X' AND SCREEN-GROUP1 EQ 'S1' .
      screen-invisible = 1.
      screen-active = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
After adding this,the existing selection-screen format has been changed.Please look at the below changes.
->Actually,there are two blocks in the existing screen with block titles.Now they are replaced with some different text
->And one more block for output format and under that the layout field selection was there in previous selection screen.Now this layout field text is changed to 'Sap Listviewer' and some butto has also come additionaly in the output format.
How to retreive the old selection-screen with previous texts and formats.
Can any one suggest to resolve the issue?
Thanks in advance!!
Best Regards,
Mounika

This is the complete code of selection-screen
SELECTION-SCREEN BEGIN OF BLOCK issel
                          WITH FRAME TITLE text-S01.
SELECTION-SCREEN SKIP.
PARAMETERS p_cstcur LIKE jest-inact USER-COMMAND ex DEFAULT 'X' RADIOBUTTON GROUP cost .
PARAMETERS p_cstfut LIKE jest-inact RADIOBUTTON GROUP cost.
PARAMETERS p_cstprv LIKE jest-inact RADIOBUTTON GROUP cost.
*Begin of Insert CBDK972000
PARAMETERS p_cstrun LIKE jest-inact RADIOBUTTON GROUP cost.
SELECT-OPTIONS sp_kaid FOR keko-kalaid MODIF ID s1.
SELECT-OPTIONS sp_kadt FOR keko-kaladat MODIF ID s1.
*End of Insert CBDK97200
SELECTION-SCREEN SKIP.
PARAMETERS p_niv_g LIKE jest-inact DEFAULT 'X'.
PARAMETERS p_niv_a LIKE jest-inact DEFAULT ''.
PARAMETERS p_niv_f LIKE jest-inact DEFAULT ''.
SELECT-OPTIONS sp_disgr FOR marc-disgr MEMORY ID lev NO-DISPLAY.
SELECTION-SCREEN SKIP.
PARAMETERS p_newfil LIKE jest-inact DEFAULT ''.
SELECTION-SCREEN END OF BLOCK issel.
SELECTION-SCREEN BEGIN OF BLOCK csel
                          WITH FRAME TITLE text-s02.
SELECT-OPTIONS sp_mtart FOR mara-mtart OBLIGATORY
NO INTERVALS NO-EXTENSION MEMORY ID mta.
SELECT-OPTIONS sp_werks FOR mbew-bwkey OBLIGATORY
NO INTERVALS NO-EXTENSION MEMORY ID bwk.
SELECT-OPTIONS sp_matnr FOR mara-matnr MEMORY ID mat.
SELECTION-SCREEN END OF BLOCK csel.

975x PUE issues with memory

Hi guys,
I have my old 975x running with no problems with 2GB OCZ since a really long time, everything worked smoothly and i never did any OC of any type in the board.
But nowdays 2GB is really few to keep the system and games running with no issues so i decided to upgrade to 4GB, i bought 2 Kingston modules (more precisely this ones -> http://www.ec.kingston.com/ecom/configurator_new/PartsInfo_ar.asp?root=latam&LinkBack=http://www.kingston.com/LatAm&ktcpartno=KVR800D2N6/2G, but i have encountered problems.
The issue is that when i put the memory the BIOS shows in post 3669952K of memory, witch is roughly 3,5GB, from what i read in several threads about i take that it is a memmory allocation issue that should solve itself once a x64 OS is installed.
But the problem is that when this 4GB modules are installed the board hangs and i cant even run a install of any OS, basically the BIOS posts, i get the "updating DMI pool data..... sucess" then "press any key to boot from CD" and then just a black screen and nothing happens, when i remove one of the modules everything starts to run fine again.
Things i tried:
- Both modules running alone in case one of the modules is broken, both works ok as long as they are alone.
- Another 2x2GB modules (OCZ), same results
- yet another 2x2GB modules (8GB total filling up all slots), and shows 7,5GB and it keeps crashing.
- Every variable in witch i can put 2 modules in the 4 slots.
- Load bios Fail-Safe config, same results
- Load bios Optimized setup, sme results.
I have the 7.1 BIOS version witch from MSI changelog i understand that it should work fine, still, im thinking about upgrading to BIOS 7.9 but i dont know quite how and wanted to ask first if it will solve anything cus i dont want to take the risk if no change would come.
What could this be?
Thanks a lot.
edit:
Here are some caps of the BIOS information tab
and another on post.

Hi jack,
thanks for the reply, i've tried the clear CMOS but none of the 2 methods apply to this MB so this is what i did:
1.- Unplugged power cord and waited about a minute
2.- Press the clear CMOS button SW on the MB, and waited about one minute
3.- Press the power button to be sure as it says on the guide, and waited about one minute
4.- Power on the system.
and this is the other thing i tried.
1.- Unplugged power cord and waited about a minute
2.- Removed the battery and waited about a minute
3.- Press the clear CMOS button SW on the MB and waited about a minute
4.- Reinserted battery
5.- Power on
and then
1.- Unplugged power cord and waited about a minute
2.- Removed the battery and waited about a minute
3.- Reinserted battery
4.- Press the clear CMOS button SW on the MB and waited about a minute
5.- Power on
Same results =(
I tried with 1 or 2 memory modules and the same thing keeps happening, here's a cap of the screen where it gets stucked.
What's with the 1024k OK memory testing? it keeps saying that either i put 1GB or 2GB memory.

Issue with Memory ID export / import

Hi Experts,
We are facing strange issue during export/import from memory ID.
We are exporting value to Memory ID from module pool program and trying to import same value in SAP workflow method.
While importing the value from memory ID it is failing to import and gives sy-subrc =4.
Any idea how can we do export/import in module pool program to Workflow method?
Regards,
Sanjana

Hi sanjana,
Please check the link. Here you can find some examples also.
http://wiki.scn.sap.com/wiki/display/Snippets/Import+and+Export+to+Cluster+Databases
P.S
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3bf8358411d1829f0000e829fbfe/content.htm
You just need to create a key and an ID to save data into INDX table.Once its saved you can use same key and id to import .
Again mentioning , dont forget to delete using same key and ID once you have imported else it may give error.
Regards,
Sandeep Katoch

Issue with - Connector Framework SAP EP 7.0

HI
Need assitance on usage of connector framework to connect to SAP R/3 using SSO.
I am trying to call a BAPI from a jsp iView using sap connector framework.
Release : EP (SAP NetWeaver 7.0 (2004s) SPS 12).
Steps I did so far :
1. imported following jars in my project :
a. activation.jar
b. connector.jar
c. GenericConnector.jar
d. jaas.jar
e. jta.jar
f. portal_services_api_lib.jar
2. declared import of class:
<%@ page import = "com.sapportals.portal.ivs.cg.*" %>
<%@ page import = "com.sapportals.connector.connection.IConnection" %>
<%@ page import = "com.sapportals.connector.execution.structures.*" %>
<%@ page import = "com.sapportals.connector.execution.functions.IInteraction" %>
<%@ page import = "com.sapportals.connector.execution.functions.IInteractionSpec" %>
3. appended portalapp.xml with :
<application-config>
 <property name="SharingReference" value=",com.sap.portal.htmlb,com.sap.portal.pagebuilder,com.sap.portal.themes.lafservice,com.sap.portal.navigation.service,com.sap.portal.navigation.helperservice,com.sap.portal.license.runtime,com.sap.portal.common.commonservices,SAPJ2EE::library:com.sap.portal.common,com.sap.portal.ivs.connectorservice"/>
</application-config>
4. added following code :
 IConnectorGatewayService cgService = (IConnectorGatewayService) PortalRuntime.getRuntimeResources().getService(IConnectorGatewayService.KEY);
 IConnection connection = cgService.getConnection("ABC", request);
 IInteraction ix = connection.createInteractionEx();
5. Verfied connectivity of system alias ABC with connetion test from portal.
When I test the repective iview after deployment it fails on the bold line with an error 'unable to deploy jsp'. I could verify that cgService and connection objects were initialized.
Will appreciate expert comments/suggestions on the issue.
Thanks and cheers,
Amit.

Hi,
When you select that property, you get a value field in the bottom of the screen to enter the Cutom values.
You can give the value there and click on the Set button.
Also check the dbpool properties for this error code.
Regards,
Venkat

Smart form printing issue with LOCL and SAP printer

Hi,
The issues are as follows:
1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
What can be done to the reports to allow them to print on our HPLJ4?
Thanks, Prathap

Hi Prathap,
Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
   Color: White
   Saturation: 100%
this can be the problem.
I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
Please change the shading for window MAIN -> tab 'Output Options' to:
   Color: Black
   Saturation: 0%
and this should resolve the problem.
Then create a new spool and check if the problem is resolved. See SAP Note #400050.
Regards,
Aidan

Solaris 10 issue with Memory 1GB on Intel 855GME

With 2GB memory installed on an Intel 855GME based Single Board Computer, we are experiencing extremely slow boots and installs with Solaris 10 (03/05). The boards boot on the order of 25-35 minutes. They are slow during the "configuring devices" phase. After the systems boot they seem fine. An install of Solaris 10 disk 1 takes approximately 2 1/2 hours with 2GB memory installed.
We have tested with 512 MB or 1GB SODIMMs installed and have no issues on several boards. We are trying to integrate the 2GB memory parts. Any recommendations would be appreciated.

Here is updated information on this 2GB/855GME issue. Any assistance, solution, or insight is very much appreciated.
We are seeing orders of magnitude (30x) increase in access time in a segment at the top of memory when the memory installed is 2 Gigabytes and booting the Solaris operating system. This segment starts at 0x3E000000 (physical - 32 megabytes from the top) up to the 8 Megabytes 'stolen' by the video (or 24 megabytes). The huge increase in Solaris boot time is because (according to our Sun technical contact) Solaris allocates memory from the top down which means its using the slow memory to boot. The symptoms change if the Internal Graphics Device (IGD) is disabled and a PCI video card is used, OR, if the IGD is set to 'steal' all 32 Megabytes available thus consuming the 'slow memory' area.
We have opened an Intel Quad issue outlining the symptoms above (see Quad text below). They suspect MTRR setup in 'anticipation' of IGD use of the memory. However, dumps of the MTRR's via emulator both with and without the IGD are the same.
Note: other model specific registers, such as the BBL_CR_Dx registers are different with/without IGD, but as they are for accessing L2 cache, don't appear to be pertinent to this problem. This opinion could change with more study.

Issue with memory for java fx 1.3

Dear all,
I need your help for an issue.
I developed a java fx application with version 1.3 and I 've now a big issue...during use memory grows until application crashes...
Is there a way to release memory during use..i read about problem with java fx release of memory...my application is almost not usable and I can't upgrade it to 2.0.
Can you give me some help?
I run it in this way
javafx -classpath xxxx.jar x2.Main
is there some option to optimize it? To increase memory for jvm?
Please help me, after about 30minutes application grows to 500MB of memory and crashes for memory leak...
Thanks

Hi,
About what kind of bounds are you talking about?
Do you want to accomplish to print out X,Y coordinates of that custom Node/Shape?
Read this it helped me a lot
http://weblogs.java.net/blog/2009/07/09/javafx12-understanding-bounds#chase
http://amyfowlersblog.wordpress.com/2010/04/30/javafx-1-3-taming-the-layout-beast/

Call function starting new task - Issue with memory variables

Hi All,
From our OIL application we have a call to the core delivery update FM WS_DELIVERY_UPDATE starting new task.Before the call we are exporting a variable to memory and deep inside the FM we have an oil routine which checks the value of this variable to decide on further flow. But since the FM is called in new task the variable is not available here.
We cannot use the SET GET parameter also as this value can be different for each session.
Can anyone suggest how to set and get the parameter value in this flow.
With regards,
Usha

Hi again,
To check whether the FM is running in new task or not - This is what I have tried (this may not be the best way), but it works fine.
1. The variable to check inside the called FM is SY-CPROG.
2. This variable will have value.
RS_TESTFRAME_CALL - If being checked from se37
Z / Y program - if called from the original z / y program (WITHOUT new task).
SAPMSSY1 - if being called using NEW TASK (and no debugging)
hope this helps.
Regards,
Amit Mittal.

Strange issue with memory module in Sat Pro 4300 series

I have a notebook Toshiba satellite pro 4300 series with 64MB Onboard + 64MB Module and I want to upgrade my memory to 320MB. I bought two ram of 128MB each. I removed the 64MB module and I put in the Slot (A) one of 128MB module but I saw that the total memory is of 128MB again.
I removed the module again and I put the second module into Slot (A) but I saw that the total memory is of 128MB again. After this I put the two modules into my notebook (Slot A and Slot B) but I see that the total memory is of 192MB.This means that it recognizes each module as 64MB and not as 128MB. Dose anybody know why this happens?
And what do I have to do to fix it?
Thanks.
[email protected]

This would be correct if the modules where indeed 64MB. The mother board has 64MB of memory already fitted directly to it so if you leave out the expansion modules the system still see 64MB. By fitted any one of the modules you have will add another 64MB making 128MB and so by fitting the second module will thus give you 192MB which is exactly what you getting.
Therefore you have almost certainly been sold the incorrect modules, 64MB instead of the 128MB modules.

Issue with Action pane sap bpc 7.5 MS

Hello All,
Got a issue , when clicking the dimension to select members in action pane it shows blank box .
Is there any XLS setting that needs to be in place OR any other thing needs to be fixed??
It happens only with one id.
Kindly help on this.
Thanks
Venkkat

Hi Venkat,
if your sp is 3 or lower then this is an old issue and you have to upgrade to sp4 or higher, if it occurs on web see please this note 1746878 - BPC MS: Action Pane Disappears from BPC Web Interface otherwise plese add you sp version.
Regards
Roberto

Issue with Memory in SAP(R/3 3.1I )/OS (AIX 5.2)

Similar Messages

Maybe you are looking for