Issue with mobile network vs wifi

Hi all, after using wifi the iPad cannot connect to 3g. It says that server is not responding or that it cannot activate mobile networks (while the signal strength is full). So I need to restart ipad and then it's ok. Thanks in advance

Same problem here...more specifically out of nowhere my ipad 3 seems to be unable to activate cellular network. But the "wheel of death" will spin and spin for many minutes prior to alerting me of the connection issue.
My ipad 1 was problem-free and the 3 just seems so much slower, especially when connected to 3g/4g.

Similar Messages

Issue with mobile network signal ("Searching")

I recently purchased 2 iPad from Singapore and upon retuning to Malaysia, i applied for 2 mobile broadband package from the same mobile provider.
Issue i am facing is, on one of the ipad, the mobile network signal bar displays "Searching" almost all the time; only a few times it displays strong signal with 3G icon then it drops to "Searching" again. I tried to swap the micro sim around between both ipad but no such issue on the 2nd ipad which is consistenly strong signal.
I even restored the ipad (factory shipped 3.2.2) but no success.
What should i do?

After further test, I noticed the unit can't find any mobile provider under Settings > Carrier when signal bar displays "Searching".
Enabling airplane mode does not help either; only workaround is to disable Cellular Data under Settings > Cellular Data then Enable it again.

GPS Inaccuracy With Mobile Network Enabled

I have a BB AT&T Passport. The GPS location with Mobile Network enabled is .25 - .5 mi off. If I disable Mobile Network and just use WiFi then my GPS Location is within 50 - 100 ft. Why is there such a disparity location with AT&T LTE? I have the latest software update from AT&T. Can we get this problem fixed AT&T?

Hi there! @loosefoot
Thanks for posting your concerns. I’m sorry to hear the location information is off.
So we can further assist you, please private message me by clicking here and provide the city, state and zip codes where you are experiencing this issue.
Thanks!
Charise

No connection with mobile network

My phone (which was bought only 2 days ago) has suddenly lost connection with mobile network. "Emergency calls only" is written on lock screen, near signal power bar there is a small red 'x'. I tried turning it off and on, tacking sim card out and putting it back in, trying to connect to mobile network manually through the settings "Service providers" (it says "Could not connect to network now. Please try again later." when I try to connect manually), changing network mode (to all possible modes). Still no luck. I can't send an sms or make a call.
What should I do?

I got similar issue but the only thing is phones randomly disconnects itself from the mobile network in some days. Then no matter you manually search for the network and try registering, it simply wont connect to any network.Your only solution is to reset the phone or turn off and on and it again auto catches your operator.

Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty.

Image Ultra Builder 3.x issue with T61 Network Driver load

Hello,
I am having issues with a Network deployment of an image on a T61 (7659-12U) During the intial boot up phase with the Network Boot disk that was created from IUB, I receive and error 1231 - The Network Location cannot be reached.. I am currently using IUB for deployment of A31, T40/42 as well as the T60 model line. None of these loads are having the problem.
Any help on this would be very much appreciated.
Thank-you in advance.
Ed

Hi,
IUB 4.01 is using WINPE 2.0<Vista based> and IUB 3.1 was using WINPE 1.0/1.1<XP Based>.
This has nothing to do with the actual image deployment. It's just that the WINPE looks more like
Vista. And this is why the method changed after you updated from 3.0/3.1 to 4.00/4.01.
To answer your questions from before:
1) Does updating IUB to version 4.01 still allow me to deploy Windows XP ?
Yes, it's still supported and possible.
2) Where on the boot CD should the new driver files be located. I took this to be PREBOOT\DRIVERS ?
As the new IUB is using WINPE 2.0, the best location for the NIC drivers is the file :
tvtos\winpe.wim
However, this is my advice.!
For my Image deployment I'm no longer using the CD for network deployment. I'm using USB key which gives me more options for the image deployment and the automatization of the deployment process.
However, if you want to use CD for network deployment, then you can do it in following way.
!!!NOTE: this is not the offical way, nor the supported way, but trust me, that it's working like charm !!!
- go to your repository location %repositorylocation%\modules
- find the file called "Z633003A.TVT" and open it using your fav zip application
- after you open this file, go to following location: tvtos\
- extract the "winpe.wim" and using WAIK unmount this file and add the NIC drivers into this .wim file
- after all the drivers are in the winpe.wim file, just copy it back to the "Z633003A.TVT" file and create a new Deployment CD
How to add NIC driver using WAIK:
This is prety easy step, but for more info, check following link:
http://www.svrops.com/svrops/articles/winvistape2.htm
As I described earlier, I'm using USB key for Network image deployment, so I have not done it this way, but I have done it a bit simplier.
Here are my steps:
- created a Distribution USB key <suing the same method, that you are using when you create a Network deployment CD, but instead of a CD I select my USB key>
- once the USB key was created successfully I unmount the "tvtos\winpe.wim" file and add all the NIC dirvers into it
This is all that I have done.
Yes, of course there are couple other steps, that I do, like modifying the BCD file, adding other WINPE files, diagnostics and other deployment tools, however, this is not realy a part of IUB, I'm using it for my WDS server and other deployment tools, that I need to use. If you know, what I mean, then you surely understand, that it's a live safer to have everything on one USB key, then on multiple CD where I need to search throught all of then to find the correct CD.
Let me know, whether this method is more suitable for you.
As described above, this is not the realy official/supported way, but it's working for sure.
Rgrds

Complaint: Issue with the Network

Facing issue with the Network for most of the time and sometimes even Data for both 3G and 2G.
My service provider was BSNL, Hyderabad, AP, India-50016
I have check even with my service provider from there they don't have any issue..
But the same works with my old BB8520 and others.
Please can you help me?
BBZ3-STJ100-1 OS V10.2.1.3247

Is it h+ or H+?
I've had similar issues when my sim card was bad. I had cut it down to micro sim size and it worked fine for a month. Then it stopped working in the Z10 but worked in my 9810. Try having your carrier replace your sim card.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Whatapp over wifi with mobile network on

I want to use whatsapp on wifi, keeping my mobile network on, but data services off (In mobile network options). I tried this thing but whatsapp doesnt work.
i have wifi setup at my home. To use whatapp on wifi i have keep my mobile network off. as the mobile network is off i cant receive calls n sms. Any solution for this?
Amey

Ok Ameydhaygude
To turn off the radio you can not disable the data on your device without turning off the radio.
Go to settings, network connections, mobile network enters
In the tab where it says data services off.
Now you can use your WhatsApp via wi-fi and without turning off mobile radio.
If you're going to be more connected to a wi-fi option reminds enable data services.
Regards.
Response you like me? Want THANK? Click
If it was the SOLUTION click "Accept as Solution"!
#4LL #ichooseBlackBerry10 @Gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

No mobile network or wifi call!

Any one know if there is problems in the North wales area ? I cannot get network or wifi call.
If there is a problem with service, how long will it be down?
Thanks

Hi
Unfortunately there has been some issues with Wi-Fi Calling but there is not a nationwide signal issue.
The Wi-Fi calling issue is being investigated but is only affecting a small minority of customers.
Have you tried re-booting your device?
If you send me a private message with your postcode details. I can check to see if there are any issues in the area.
Thanks.

Mobile Network or WiFi for updates?

I've done my Q10 update(s) using the mobile network without any problems.
I saw somewhere that said updates should only be done using wifi.
Is this true? If so, why?
Thanks!
. . . . . Pete

i have done both, no difference but LTE was faster than my wifi at work.
Wifi at home is faster than my 4g connection as LTE is not so strong at home at times
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Recent issues with mobile safari

What the heck is going on with mobile safari !?! Super slow on loading most anything, have to refresh the page to finish loading it and can't like or comment on facebook either

I think your problem is your network connection. Are you using cellular data or Wifi when you notice the slowness?
I suggest you reset your net work connections.

Q10 won't automatically switch to mobile network when wifi becomes unavailable

Is there something in the settings I am missing to have continuous connectivity? It is quite frustrating to realize there is no mobile network connection being recognized when there is always one availabe. The cell must be powered off and on to re-establish mobile network connection. Please help

Hey Staats,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
What version of BlackBerry 10 software are you currently running? Go to Settings>About to find this information.
Also has this issue happened ever since you had the BlackBerry Q10?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Issues with Mobile Broadband on the Tablet 2

Is anyone having slowing degrading connection issues with Vodafone and the Tablet 2. Upon fresh boot, signal is strong, then degrades until a reboot is required. Seems very odd. Other devices connecting to vodafone at the same location have no problems.

hi rogerf.
due to it was working before, i can say there's no compatible issue with the device and computer.
you may need to contact ericsson or the mobile provider in aussie. still, there may be users here who has/had the same issue. you can wait for reply.

Recurring issue with mobile upload

Hi all,
Using Lightroom 5.6, I am experiencing ongoing issues with synchronising (uploading) LR to mobile devices. In brief, the upload will typically fail in mid-session with some collections partially or fully uploaded and some not started. (This may initially have been caused by going off-line during an upload), It will not recover. Deleting all uploaded data to prompt a restart does not help - it does not restart either.
Previously I have had to contact support and send the diagnostic report. Apparently there is a flag on the server end that needs resetting. Not the most satisfactory of solutions as it requires an action outwith the users control, but it does / did reset the file transfer interface. Apparently this bug was scheduled for fixing in the next up date. I understand I am on the latest (5.6) version , so does anyone know if this is still a bug?
Meantime, can support please reset my connection?
Regards .... Alastair

Hi Alastair,
I've contacted you privately.
Thanks,
Ignacio

X200 WWAN (f3507g) compatibility issue with Juniper Network Connect VPN

I have just recently received my X200 with the build-in WWAN which is a Ericsson f3507g card and found that it causes my Juniper VPN software unable to load, and I have also noticed other applications like Outlook is rather slow. When I "Disabled" the WWAN card in "Device Manager"->"Network Adapters", all apps work perfectly. I am using 32-bit Vista Business.
Can someone test and see if you have the same problem as mine? I am wondering if this is a driver issue of the f3507g WWAN card.

Hello
I have just spent all day trying to work out why Outlook takes forever to connect on initial start. It was purely by luck/perseverance that I happened to notice an "ipconfig" stuck for a second on LAN2 - which is the ericsson card.
I too then disabled this adapter and found Outlook performance cured. I had popped along to these forums to find a fix but at least I can verify the issue with you.
Bloody annoying since I've only had the X301 1 day - I bought it for use whilst my X300 is having its wireless-freezing issue sorted. Not a good advert for Lenovo I think.

Issue with mobile network vs wifi

Similar Messages

Maybe you are looking for