Issue with multiple instances of OC4J and one JDK installation

Hi,
I've successfully installed two instances of OC4J 10g (10.1.3.0.0) on a single server and am able to run with two differently named JDK 5.0 installs.
However, I've not been able to concurrently run both instances with a single JDK. The 2nd OC4J instance starts, but then stops immediately with a JVM termination.
Does anyone have an idea of the cause and a possible solution to the problem, as the current arrangement adds a level of complexity to upgrades that I'd like to remove?
Thanks,
Malcolm White

I run two OC4J 10.1.3.1 instances in parallel without any problem. Both instances use the same JDK and run without any problems. Seems you have some problems in you configuration.
Best,
Manfred

Similar Messages

  • Many issues with network of 2 AE and one AEBS

    I have a well functioning small WDS network of two airport express (AE) stations, a wireless printer, a G4 iMac and a 12" PB. One of the AE is hooked into the cable modem with an ethernet cable and is set-up as the main base station. The other functions as a remote to extend the network.
    I bought an Airport Extreme N base station (AEBS). My intention is to use it as a a file server. I've attached a powered USB hub and two USB hard drives to it. I'd also like it to be available on my existing WDS network, so I needn't change networks everytime I want to access files through the AEBS.
    The AEBS has version 7.0. I haven't been able to update the version in Airport Utility, because it kind of hangs up (stays at 0%) and then fails.
    Problems:
    1) to solve the firmware update issue: Do I need to set-up the AEBS to access the internet first? When I'm on my small WDS network, I can't see the base station, since it is setup as a separate network. When I switch to the AEBS network, obviously I do not have internet access. So how do I update the firmware? What could be the reason for the update error?
    2) The AEBS file sharing network was available yesterday, but today I can not access it from my Mac (neither the Mac nor the AEBS was put to sleep or powered down during that time). I was in the process of erasing the whole HD so I could do a fresh wireless backup. The menu bar icon for the airport disc shows my AEBS disk, but I can't connect to it. I enter my password to access the AEBS network and then the connection fails. What could be the cause? Do I need to reset the AEBS everytime? Is there an automatic logoff somehwere I need to disable?
    3) I tried manually setting up the AEBS to join my WDS network. I followed all the instructions: i.e. adding the MAC address of the AEBS to my main station setup and indicating the AEBS to participate in a wireless network as a remote relay and adding the main station MAC to the setup. Channels are set-up automatically. DHCP is also automatic. However, I get an eror message when updating it. Basically it will say someting to the effect that the AEBS can no longer be found. What could be the cause of this?
    (Airpot Utility worked great when I added my second AE to the WDS network. But when doing exactly the same for the AEBS, I get error messages as above.)

    I solved all my problems mentioned above. It took a while to figure out.
    First I discovered that connecting the Airport Extreme N Basestation (AEBS) to an existing WDS network gave me continuous errors: I couldn't update the firmware from 7.0 to 7.1.1 etc.
    So I reset my Airport Express (Ax) which was previously acting as a remote and I reset the AEBS. I kept the Ax (which was acting as a main station and is attached by ethernet to the cable modem) as is. I set up all 3 near each other.
    While keeping the reset Ax and AEBS in default settings, I selected my existing Network in the airport menu icon and then I selected the AEBS in the Airport Utility and was able to update the firmware of the AEBS.
    Settings for the Ax acting as a main station: WDS settings: Participate in WDS; allow wireless clients. Internet: I set connection sharing to "share public IP address". DHCP and NAT at default settings. Channel 6. ( I discovered that the main station and the two remotes need to be on the same channel!). Set up as a main station, allow wireless clients and and added Mac addresses of the Ax and AEBS. Updated.
    Then I started by adding the AEBS the WDS Network created by the main station: participate in network; allow network to be extended = off. Set up as a WDS remote. Allow wireless clients. Added main station Mac address. Internet connection sharing = off. File sharing enabled. Channel 6. Updated.
    Same set-up for the Ax as a remote.
    Now I can access my two USB drives wirelessly over the network and each remote has an IP address.
    I did a speed test over my wireless connection for internet speed. Results: Download: 9442 kBit/s
    Upload: 1006 kBit/s
    Answer time: 13ms
    So everything is OK!

  • Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

    Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

    okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
    anyway, problem 2 and 3 are still to be solved.
    and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
    //e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
    Last edited by deF291 (2011-04-23 16:16:31)

  • I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

    I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
    I mostly enter the original items on my laptop
    There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

    This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

  • Issues with multiple things since Mavericks update

    I installed the Mavericks update and since, I have been having multiple problems with different things on my MacBook Pro 13"
    1. Printer issues: I have an HP officejet 6500 wireless printer (Officejet 6500 E709n Series), and now it's having major issues with printing, yet was working perfect prior to update. It will either cut out pages when printing PDF documents, or printing so slow that it has to take a break in between printing each document (an issue that all never occurred until update), to print documents back to back, it will stop after one document as though I have no other documents in queue to print, and pauses for an extremely long time (nearly a full minute, no exaggeration here, literally almost a full 60 seconds), something it's never done before this update. My Apps update even did an update to the HP software that is inside the Mac already to use printing (in other words, the mac doesn't need to have the HP software manually installed for it to work, it automatically sees the printer because it is connected to my wireless network just as my Macbook Pro which is also connected wirelessly to my network).
    2. Internet issues: am now unable to click on certain links in safari that I was able to use prior to the update, yet they will open fine inside of firefox with no issues, yet I cannot always switch between two different browsers to perform task online (literally have to start all over inside firefox while in the middle of something in safari). Also lots of websites no longer work correctly and I have to constantly clear history and cookies to attempt to use certain sites, at times it will help, other times it wont work period, yet the same exact site will work perfect in firefox (which I do not use, only on my system for use on certain sites for school because in safari prior to the update, I would have issues with only the class site and some links not working at all, no spinning wheel, no errors, just nothing, no response of any kind, basically worse than what it was before the update). Another issue, hit Ctrl+a to select inside Safari and it highlights, but then when you click out of the highlight, it comes back on it's own several times without you hitting anything, just click inside the screen on a blank space (no links, etc) with touchpad.
    3. System issues:  My system is way slower than what it was prior to the update, click on things and it wont respond at all, then minutes later will eventually respond or pops up the spinning color wheel, which it either never responds or takes an extremely long time to respond. And no matter how much I restart, it doesn't help anything. Even just to sit doing nothing, no clicking or usage on the system, and the color wheel pops up.
    4. Mail issues: Mail is now popping up completely blank messages that I have sent out, the person receives it with no issues, yet I cannot look at the message I sent neither in the inbox or the sent items when I need to look at them again, an issue not present prior to update. Also I an now having issues when receiving mail, sometimes it will check for mail and sometimes I have to manually click to make it check the server for mail, an issue not present prior to update as well.
    As of now, since I have had the chance to used the system since the update, these are the issues I have had, yet haven't had the chance to check other things, so there may be other issues that are occurring that I'm not aware of at the moment. I knew it would be a mistake to do this "free" update and did so anyway and now having one issue after the next with each application I open to use.
    Mac general info:
    Mac is one year old, purchased brand new, no shareware programs of any kind installed.
    Use for school and basic web surfing use.
    Do not install any programs onto system that I'm unsure are safe (basically programs for/from school/school websites only, or from the Mac Apps store only), not even programs like Skype, nor any windows based programs of any kind.
    Lots of free memory avail because I save everything onto external hard drives (purchased brand new as well, only 4months old) in case system crash occurs, only things on the system is Itunes music or pics from photo stream that sync to the system when Iphone connected.
    Mac system info:
    - Processor  2.5 GHz Intel Core i5
    - Memory  4 GB 1600 MHz DDR3
    - Graphics  Intel HD Graphics 4000 1024 MB
    - Software  OS X 10.9
    - Number of Processors:          1
    - Total Number of Cores:          2
    - L2 Cache (per Core):          256 KB
    - L3 Cache:          3 MB

    For those needing help fixing their system and putting it back to Lion or Mountain Lion, this is what I have done to eliminate all my issues in about an hour (depending on your internet connection).
    Amazing thing, I just restored my computer back to Mountain Lion, and she's working perfect again, as I knew she would. E-mail popping into mailbox instantly as it should and did before the update, printer working fast as it was before update, no more freezing or glitches of any kind thankfully and finally. Here is the link that is through the Apple site to direct you on how to put your system back and get rid of Maverick's, that is assuming that is what you would like to do and also includes link for those wanting to try fixing the issue if that is your preference (most of this info is for those with mountain lion and some with the previousverisoin of OS X lion).
    If you want to keep Maverick's here is a good post on the apple discussion board to help you out:
    https://discussions.apple.com/docs/DOC-6161
    If you just want to totally get rid of it and put back what you had before, this is the short version of how to do so:
    https://discussions.apple.com/docs/DOC-3353
    NOTE: This particular link has a lot of info on what to do for different situations, it is a bit lengthy, yet still very helpful.
    OS X Mountain Lion: Reinstall OS X (direct from Apple support site, not someone else):
    http://support.apple.com/kb/PH10763?viewlocale=en_US
    OS X: About OS X Recovery (also from apple support directly and includes some instructions just the same as previous links above):
    http://support.apple.com/kb/HT4718
    Just in case you aren't sure what it will all look like as you are doing things, this is a link to show you a few pics of what you will see  as you as you are going through the process, it can be helpful for those who aren't sure what they are doing or how to do things at all:
    http://www.apple.com/osx/recovery/
    This is a way to download the Mountain Lion disk info from the server
    http://support.apple.com/kb/DL1433
    I hope this helps someone, it was amazing for me and my system is working perfect again like it was, battery life is way better went from like 3 hours to like 5 (not on full charge by the way, after it sat for a while doing the online update which took a while so that's saying something alone, huge improvement). I plan to wait a while before attempting to reinstall Maverick's, long enough for them to fix the bugs.

  • Multiple instances of OC4J on the same machine

    Is there a way to cofigure OC4J to have a few processes on the same machine, all listening to the same ports?
    My purpose is to develope and deploy a few applications on the same machine, and each application should has its own process, so if onw fails or restarts, it will not effect the other applications and the other programmers.
    I don't want to make each application to be bounded to differnt port.
    is it possible ?

    Two instances of oc4j cannot listen to the same port...you will
    get an error.
    To do this, you will need to cluster oc4j. This is fairly easy,
    but you app needs to be "clusterable". All classes need to be
    serializable which are used by your servlets. The
    <distributable /> tag needs to be in your web.xml file. No
    stateful session beans can be used. (sorry, but oc4j doens't yet
    support clustering with sfsb's).
    The second step is that your default-web-site.xml or *-web-
    site.xml file should be set up for clustering. Do this by
    creating a cluster-island attribute in your web-site tag. Also
    change the port from 8000 to something like 8080 or 8090 or
    something else. It should look like this:
    <web-site host="192.168.1.101" port="8080" display-name="some-
    name" cluster-island="1">
    <default-web-app application="someapp" name="someappname" />
    <frontend host="192.168.1.101" port="8000" />
    <access-log path="../log/some-web-access.log" />
    </web-site>
    Your server.xml and application.xml will be the same as when you
    don't cluster.
    Make sure you have 3 different copies of your j2ee/home
    directories...of course with different names....like home1 and
    cluster.
    Edit the rmi.xml and jms.xml files to change the port number
    that the home1 oc4j will listen to. The jms port is usually 9127
    by default, so use 9128. The rmi port is 23791, so change it to
    21792. This will keep the rmi and jms servers from conflicting.
    Make sure that the home1 config/default-web-site.xml uses a
    different port than 8080, say 8090, but the cluster-island name
    is still 1.
    Open terminal windows for each instance of oc4j, and start them
    in the normal way.... java -jar orion.jar
    Open a terminal window for the j2ee/cluster, and issue this
    command:
    java -jar loadbalancer.jar -host 192.168.1.101 -port 8000
    You should see that each of your oc4j instances are recognized.
    There...that wasn't so bad, was it?
    regards,
    the elephantwalker
    www.elephantwalker.com

  • UCCE with multiple instance

    Hi everyone,
    I have a plan to install UCCE 8.0 with multiple instance in my lab environment.
    I'm not sute that, do I have to use hosted model or use enterprise and just create multiple instance on it.
    Actually, I want to implement multi-tenant , I'm not sure because I see that enterprise model also can add more than 1 instance.
    And if I use one of this model, could anyone tell me that what server I have to separate.
    Thanks in advance for your help.
    Regards,
    Tinnakorn

    Hi Tinnakorn,
    The Cisco Unified Contact Center Hosted (Unified CCH) solution is largely the same as Unified CCE, but it supports multi-tenant or shared servers to manage multiple customer instances. That is the reason you see the capability to add multiple instance, even in UCCE.
    All Unified CCE systems are deployed as a single instance (using the same instance name and number in setup) across all the Unified CCE components.
    Please refer to UCCE SRND for more details.
    Thanks,
    Hitesh

  • Sql server with multiple instance

    hi  All,
    i want  to  install sql server with two instance   and i want  to assign two  separate is  ips   for  both   default instance  and named  instance   and  both   should  work like
    two different server
    note:  If i  logged  with  one  ip(default instance)   it should  show  its  own  databases  not both or  named   instance  databases
    thanks 
     chintala

    Hi chintala,
    According to your description, if you want to assign the two different IP to stand for default instance 
    and named  instance, I recommend you set up aliases on a SQL Server with multiple instances. For example, a physical server is named WinServer and 2 instances of SQL Server named WinServer and WinServer\instance1.
    We need to add 1 IP addresse to the WinServer, there is one IP address already assigned to WinServer, 192.168.1.1, by adding one new IP's, 192.168.1.2 .
    We need to move into DNS to configure our host names and aliases.  The physical machine must be steup as a static IP in DNS. SQLAlias1, which point to the default instance on WinServer, will be setup as a DNS with an address of 192.168.1.1.
    SQLAlias2, which will point to WinServer\Instance1, will be setup as a new Host (A) record in DNS with an address of 192.168.1.2.
    When everything has been completed on the DNS side, you need to open up SQL Server Configuration Manager on WinServer and configure the protocols for each instance one at a time, restart the 3 SQL services.
    For more information about how to set up aliases on a SQL Server with multiple instances, you can review the similar article.
    http://kevine323.blogspot.com/2013/08/setting-up-aliases-on-sql-server-with.html
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing.  Has this issue been resolved?  Thank you!

    We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing.  Has this issue been resolved?  Now that we are 2 upgrades behind, I'm getting little concerned.  Thank you!

    Oh, well that was a whole other kettle of fish:
    Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
    When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
    When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
    I didn't have to do anything with the iPhoto Libraries, that I can recall.
    I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

  • Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks?  Don't want to download Yosemite.  Not hearing good things about it.

    Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks?  Don't want to download Yosemite.  Not hearing good things about it.  I'm on Mavericks 10.9.5.

    one obstacle, quickly removed. thank you.
    nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
    i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

  • SPEL in Extended VO - Issue with Multiple Rows

    Hi,
    I have extended a seeded VO by adding a new attribute *'Course_Flag'* with attribute type 'Boolean' and Query Column type 'VARCHAR2' and i wa successfully able to personalize and view the data of the new attribute *'Course_Flag'* in the page as ('true' / 'false') aacording to the query where clause.
    Now after adding a new image with SPEL property as *${oa.LearnerCatalogCoursesVO.Course_Flag}* it will have an issue with multiple items.
    I mean the SPEL will take the first row value 'true' / 'false' and will be corrected rendered according to the value of the first row and ignore other rows values.
    Example: if the *'Course_Flag'* value of the first row is 'true' then all the images will be rendered and if the *'Course_Flag'* value of the first row is 'false' then all the images will be NOT rendered.
    Please advise if I've missed any step.
    Thanks in advance to all.
    Regards....Ashraf

    Dear Kali,
    I have added a new function to the seeded VO SQL +('XXARMS_TRG_EVALUATION_PKG.XX_COURSE_GOT_EVAL')+,
    SQL Statment :-
    select av.activity_version_id, avtl.version_name, av.language_id, av.start_date,
    av.end_date, av.version_code, i.category_usage_id, upper(avtl.version_name) AS SORTVERSIONNAME,
    XXARMS_TRG_EVALUATION_PKG.XX_COURSE_GOT_EVAL(i.category_usage_id, av.activity_version_id) Course_Flag from
    ota_act_cat_inclusions i, ota_activity_versions av, ota_activity_versions_tl avtl
    where i.category_usage_id = :1 and i.activity_version_id = av.activity_version_id and
    nvl(av.end_date, sysdate + 1) >= trunc(sysdate) and
    av.business_group_id = ota_general.get_business_group_id and av.activity_version_id = avtl.activity_version_id and
    avtl.language = userenv('LANG') and
    ota_learner_access_util.learner_has_access_to_course(:2,:3,avtl.activity_version_id) = 'Y'
    And it is retriving the correct data for each row and i did not write any code in the RowImpl.
    Thanks for your help in advance.
    Regards...Ashraf

  • I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

    I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

    Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
    Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

  • OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B

    I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1.  
    Everything works perfectly previously on 10.8.4 and 10.8.5.  I did not test on 10.9.0 as I went straight to 10.9.1.  Anyone else having this problem?  Any thoughts on resolution?

    OK so perserverance seems to have helped here - i used the cmd R function on start up to get to the page where i can re install OS X Lion - Safari now working.
    However i have Office 2011 for MAC and now Excel wont start so i will post on another thread for help with this
    Hope this helps if anyone has a similar issue

  • Issue with Acrobat 10.1.2 and Windows 7 64-bit Preview Handler

    Hi. I work in an enterprise environment that is currently migrating to  64-bit Windows 7. The only version of Acrobat we have approved for Windows 7 is 10.1.2. We're seeing an issue with this version that causes the preview handler to not work. The preview panel in Explorer is just white and will eventually give the error "Preview handler surrogate host has stopped working."  I've tried to fix listed on http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html but that registry key is already correct. Our current work around for these users to just install Reader X1 and make it the default PDF handler, but I would like to find a better solution. Is there a known issue with Acrobat 10.1.2 and 64-bit operating systems? Or is there a way to change just the default preview handler?

    Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
    Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
    I'll ping some folks about the error you are getting. . .
    hth,
    Ben

  • If I have a temp1.dwt.php with 60 files on it and one editable region, how apply to this template a

    if I have a temp1.dwt.php with 60 files on it and one editable region, how apply to this template a new temp2.dwt.php with same one editable region same place, without need to create new files and copy / paste editable region contents???
    eg I have a 3-region layout(template) with one editable region with html tables and want to convert it to:
    3-region layout(template) with one editable region with DIVs
    editable region contents all files remain the same...
    well?
    dw cs6 and dw cs4

    Name your editable regions the same in the new template as they were named in the existing one.
    Look at the code in the old template.  Find all regions like this -
    <!-- TemplateBeginEditable name="whatever" -->
    Make note of the name.  Ensure that all corresponding regions in the new template have the same name as they did in the old template.
    Then do a site-wide Find and Replace to find the old template's file name, and replace it with the new template's file name.
    if the old template is templ.dwt and new templ.dwt.php???
    Find SITE-WIDE "templ.dwt" and replace with "templ.dwt.php".

Maybe you are looking for

  • Regarding BDC session

    Hi i am processing my BDC pro. in Session method. my requirement is i have to capture the error records into a file and i have to write that file on appl. server. how to capture the error records from error log? please reply

  • 10.9.1 installs, then system turns off and does not restart.

    10.9.1 installs, then system turns off and does not restart. When I eventually turn it back on, it installs again, then turns off.. Endless Cycle.. I have booted to restore disk, found errors that needed to be repaired and tried to repair them but sy

  • Real Player not working properly since upgrade to Snow Leopard

    Ok, before I start, I know RealPlayer is not an Apple product, but I am not premium Real content subscriber, and I don't expect to get any support from Real on this matter. I only use the player to listen to BBC Radio which is vital to me as I live o

  • CD/DVD-ROM is not recognized.

    I recently replaced my HD and all is well except the CD/DVD-ROM isn't recognized. It worked fine before the old HD crashed. I'm not familiar with jump settings but on the new hard drive there is a diagram that shows choices of "Device 0", "Device 1",

  • Importing Captured Movie Troubles

    So, I've created a template. I've also created movie files. My movie needed some edits in terms of copy and pasting some backgrounds for a few slides to aid in the timing of my ojbects and presentation. Now that I've imported the movie into the templ