Issue with Mvt type 311

Hi friends,
I have a issue with stock transfer from one storage location to another with transaction MB1B using movement type 311.
When ever we transfer stock for a material, it transfers from unrestricted to quality restricted stock. eg. if a trasfer from 0001 sloc to 0002 sloc, then it will transfer 0001 unrestricted to 0002 quality inspection.
Can plese some one tell me where these settings are maintained?
Thanks,
Rohit

Hello,
This is not the SAP Standard Practice,
While transfer of material from one storage location another stoarge location thorugh 311 movement type, the stock type should be same in both the storage locations.
you can directly transfer from Unrestricted 0001 storage location to 0002 Storage location (quality inspection), before that you should match both stock type , through respective movement type 321 or 322.
then you can transfer one storage location to another (stock type should be same)
Regards
Mahesh Naik.

Similar Messages

Automatic creation of Batch using mvt type 311

when i am trying to transfer material from one storage location to another using mvt type 311. the system is not creating the batch automaticcally.
I have already maintained allthe basic configuration required for this.even in IMg ->logistic general->batch management---->creation of new batch in this path also for mvt type 311 i mainatined (automatical/manual without check)batch creation.but still the system is not generating the new batch.
Can anybody help in this issue.
Thanks in advance

Hi,
When you do transfer postings, SAP will set the batch number same as the one from which you are issuing the stock. To avoid this you can set the creation of batch to B (Automatic/ Manual with check in user exit)
You need to use following user exit at batch creation
EXIT_SAPLV01Z_001
EXIT_SAPLV01Z_002
Hope this helps, reward if useful,
Best Regards VS

Automatioc TO creation with mvt type 331(WM)

Dear Friends,
I am facing following WM issue, Kindly go through it and reply me with your valuable solution.
In my plant QM is active, so while receiving goods against any Purchase Order (MVT TYPE 101), all my stock goes to quality. After UD check, 99% material move to unrestrictd stock (321 mvt.type) and 1% used for quality (331 mvt. type).
For an example if I have received 1000 kg material (which initially goes to quality), after UD 995 kg material come to unrestricted stock and 5 kg used for quality check.
In my existing system for material document with mvt. type 321, one PCN is generated in the background, and using LT05 we make TO from PCN and confirm it.
But is it posible to create the TO and confirm from the PCN (Mvt. 321) in the backgroung itself, i mean to say that while my QM user is doing UD, material document with mvt 321, one PCN and TO will be generated and TO will be confirmd in the background itself.
I don't want to use LT05 separetely to make TO from PCN.
Please reply me soon.

Use RLAUTA11 SAP Report - Create transfer orders for posting change notices automatically.
Thanks & Regards,
Sudhakar

IR of WITHOUT PO (WITH MVT TYPE 501)

HELLO EXPERTS,
when I go for GR without PO with movement type 501, i dint find any delivery note field in MIGO SCREEN.
so can anybody help me how to get it.
If it is not possible than how to do MIRO (invoice verification), with any reference document, like delivery note,vendor or something else.
because my project is in GO-LIVE phase, there is some GR WITHOUT PO.
so if I don't have any reference document, my data entry will get doubled (GR,than IR)
SO can anybody suggest me , if there is some other way..so that while i m going for IR data is not required,i e. there is some reference document from which I can copy my data.( like PO BASED IR )
kindly help me out.
regards..
Raghu

Hi
You can upload the initial balance of inventory (GRed but not Invoiced) in MM and let FI upload initial vendor balances (to be paid to vendors - open invoices). There after FI can match these two (intial upload accounts). Or else do GR with mvt type 501 and then post FI invoice - debiting consumption account and crediting vendor account. But result is same as explained above.
Thanks

Mvt type 311

Dear All,
I have transfer material sloc to sloc using mvt type 311, our requirement is to control the mvt type.
can i assign release strategy to this time.
Thanks
Shital

There is no provision to assign Release Strategy to material Doc. However this can be restricted at Authorisation level for T code MB1B / MIGO_TR.
Regards
Bhavesh Mistry

Does SAP or Oracle have an issue with these type of processors?

Does SAP or Oracle have an issue with these type of processors?
Intel Xeon X5260 & E5450 vs Intel Itanium PROCESSORS
I want a Sales / Marketing URL link or white papers that talks about processor recommendations.
SAP GUI 7.20

> Does SAP or Oracle have an issue with these type of processors?
>
> Intel Xeon X5260 & E5450 vs Intel Itanium PROCESSORS
>
> I want a Sales / Marketing URL link or white papers that talks about processor recommendations.
SAP does neither "recommend" nor "deny" any processors.
If you check http://service.sap.com/benchmarks then you get a lot of machines with different CPUs/operating ssytems and database combinations.
Choose the one that suits best for you.
Markus

MB1B with mov. type 311 - error message

hai experts
I have deleted AAA storage location (in spro) actually stock is available in that storage location. now again i have created AAA storage location (in spro), now i want to trf. that stock.. while doing MB1B with mov. type 311 at the time of saving i am getting error message like this: of the required qty. of material 12356789 (material code) 100.00 kgs remain (s) open.
Pl. help me to come out of this problem
Regards,
sree

Your deletion and recreation has nothing to do with this message, here am very certain.
But to identify what the message caused, you have to give the full message along with its message number (double click message)
It looks like you post your 311 in reference to a document (order, or reservation..). and the quantity that you move is smaller than the requested quantity.

BAPI_GOODSMVT_CREATE used with mvt type 105

Hi,
That is easy.
Somebody has worked with the mvt type 105* and the BAPI_GOODSMVT_CREATE in the same development?
Release GR blocked stock for warehouse
I am trying to use this combination but it does not work.
Thanks in advance.

The message is:
M7 036 - No goods receipt possible for purchase order 4500001156 00000
Let me explain my process.
The users creates a goods receipt with mvt type 103 (blocked) and, in another moment, they will make a mvt type 105 (release). I am trying to convert it to an automatic process using a BAPI for this, but it does not work.
That is my problem,
Thanks in advance.

Issue with Message Type Triggering during Inbound Delivery Creation

Hi Experts,
Hi Experts,
Currently we are facing issue with message type triggering during inbound delivery creation:
In NACE transaction for Inbound delivery we have 3 custom output types:
Pricing Procedure Used is standard one -> E10001
Z140 Inbound Delivery Create (This should get triggered when IB delivery is created)
Z141 Inbound Delivery Change (This should get triggered when IB Delivery is changed)
Z142 Inbound Delivery Delete(This should get triggered when IB Delivery is deleted).
At present if i check delivery in VL33 -> Extras -> Delivery Output
Both Z140 and Z141 are being triggered during IB delivery creation. While it should be only Z140.
Could you please suggest that are we missing any configuration in SPRO or we need to create any custom routine (requirement) to handle this?
Thanks

Hi,
There is no fine-tuned control for inbound delivery messages as for Purchase order. Hence I guess to meet your above requirement, you have to go for a custom solution similar to the PO fine tune control settings.
Thanks,

No authorization for this transaction with mvt type 101

Has anyone seen this error:
RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120
RFC BAPI Wrapper call:You have no authorization for this transaction with mvt. type 101
RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120
The strange thing is that when I assign user with a different Personnel Number and it works just fine. But when I switched back to his Personnel Number, then I get above error.
Even though I don't get any order list but I got all notifications and technical objects.
Also, this user has same roles with everyone else. While everyone is working fine this user is the only one that getting the error and no order download to PDA.
Regards,
Dai Ly

Hi,
please run ther getlist and getdetail handler in the backend directly for that user - most likely you will get a better failure message there.
Nevertheless - what Application yre you using? Is it MAM? If yes, check the SPRO setup for this particular user,
Regards,
Oliver

Goods Issue Problem - Mvt Type 645

I am trying to do Goods Issue - VL10B.
Error message showing:
1)Delivery has not been put away/picked (completely)
2)The Storage location is not defined for delivery item 000010
it is a single step automatic GR (Mvt Type 101). The material to be posted (XFF38) is a non valuated material with Accounts Assignment. We are trying to post the stock directly to consumption.
Please help me
Edited by: Vijay Kakani on Feb 25, 2008 4:26 PM

Hi
a material is intended for consumption/usage, the order contains an account assignment (for example, a cost center, project, sales order, etc.). For items to be posted directly to consumption/usage, Production or MRP, you can enter a recipient or an unloading point in the order. Both specifications are automatically proposed by the system during entry of the goods receipt. Note that you can change the unloading point, but not the recipient.
if underdeliveries are allowed in the system, then The system interprets the quantity received as a partial delivery and accepts it as such. The system issues a warning message indicating that there has been an underdelivery.
It is also possible to enter an underdelivery tolerance percentage in the order item. When a quantity of goods is received that lies within the underdelivery tolerance range, the quantity is interpreted as a partial delivery and is accepted as such. The system does not issue a warning message. If the quantity of goods received lies below the underdelivery tolerance, the system issues a warning message.
If the underdelivery is not a partial delivery but a final delivery, you have to set the "delivery completed" indicator.
In the Customizing system, you can define that the "delivery completed" indicator is set automatically if the underdelivery lies within the tolerance limits. In this case, the system interprets any underdeliveries within the tolerances as final deliveries.
check the configuration for under delivery tolerance
Hope this helps
BR
SK

REM- Planned order with Movement type 311

Hi,
I want to use movement type 311 along with planned order in MFBF but system is not allowing me.
Do I need to mention movement type 311 somewhere in configuration of planned order.
Regards,
Samir Wadajkar

Dear
Basically Movement 311 will be used for Material Staging.Material Staging can done with reference to the Material or with reference to the Planned Order etc...
You can do the following with MF60:
1. Direct stock transfer : You must select Staging type (Storage location level)
To use direct stock transfer, you must maintain an issue storage location for each component in the BOM (or in the material master record or the production version). The system only displays those requirements for which you have defined an issue storage location
2. Stock transfer reservation : You must select Staging type 1 (Storage location level)
The system then automatically displays the storage location view of the pull list. The system also only selects the corresponding requirements.
In Global Settings, you must adopt the default settings and you must also select Stock transfer reservation.
I hope you must have maintained the Customization Setting for Stock Determination Strategy with reference to your plant with 311 movement.
Further details refer below link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/8a/a5a8d04adc11d189740000e8322d00/content.htm
Hope this is clear to you
Regards
JH

Mvt type 311 posting - automatic dummy printout needs to be disabled

Hello Friends,
We have a custom program to post transfer postings. whenever 311 type GR documents are created , a dummpy printout occurs in the printer ( printer configures in user's profile ) .
I am not able to find the corresponding form associated with this. also , I need to deactivate this.
Please guide with some clues.
I tried searching the posts , Many are similar to my problem - but none of them solved my issue.
thanks
Raghu V

Hello Ramakrishna,
thanks for your inputs.
i have checked OMB5 - option 1 is marked for 311 movt. type . i guess removing this might stop trigerring the printout for all 311 movt. types .
but my question here is how to find which form is getting triggered ? because it contain junnk data and emptyr values in the printout.
also , In transaction : OMLV , i see that print code assigned is 02 for movt. type 311. whats the significance of this ?
many thanks,
Raghu V

Issue with paper type when remote printing

Hello
we have an issue with printing from redirected printer
on the local machine Windows 8.1 i have a printer installed and when i try to print from a remote pc to my installed printer on my local pc the paper type is replaced.
on the local printer it was set to letter but on the remote the redirected printer is set to legal.
i try to switch it to letter but it was not kept it switch back to legal.
any adviced will be good ?
Thanks

Hi,
We may try to test this and will get back to you as soon as we get outcome.
In addition, here is a Print/Fax forum below you may get more insights from print experts:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverprint&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Storage location is not updated after posting GR with Mvt type 107(Valuated GR blocked stock)

Hi experts,
Before posting GR through Movement type 107 (valuated GR blocked stock) we can see the storage location field in MIGO screen and able to enter value into this field. But after posting GR when we retrieve the material document we are finding that the field (storage location) is blank, i.e. it's not updated at all. When we check the stock in MMBE we find that no quantity is updated for valuated GR blocked stock.
We want the storage location to be updated while posting GR with 107 Mvt type.
Any idea Please?
Points assured.
Thanks
Amitava

SAP describes it in help.sap.com: Since the material is not to be added to the inventory yet, do not enter a storage location.
If you require a storage location, then I assume that your design does not match with the design of SAP, you are using a function to solve a gap which is not foreseen by SAP for this case.
Especially the 107 is usually representing stock which is still in transfer but you are already the legal owner and have to show the value of those goods in your books.

Issue with Mvt type 311

Similar Messages

Maybe you are looking for