Issue with my calender

I am unable to use my calendar ie. add or edit an event on my iMac. I keep getting the following message pop us. What do i do to resolve this?
The URL https://p01-caldav.icloud.com:443/1030921380/principal/ encountered HTTP error 404. Make sure the URL is correct.

Did you get this issue resolved? I'm having the same problem.

Similar Messages

Having Issues with Outlook Calender Syncing on a BB Curve on Nextel

My boss at work recently got the BB Curve from nextel and we have gotten the device setup pretty much the way he wants it. There is a small issue though that when he tries to sync his callender it gets to the same spot, event number 31 throws out a non-descript error message and bombs out. Its not a deal breaker for him but it would be nice to get solved just because it would be nice to know why its doing this.
Has anyone experianced this? As a side note I dont know if it matters but it synsc fine at home but the issues are at work and at work his Outlook is coming off of exchange... Could that be a issue? or could it be a date range issue?

OK...that's good information, thank you. But that "error code" would really be very helpful...there are many of those odd codes inside of the public KB's, so it would really help in narrowing down the issue (assuming the code you are getting is in the KB's, of course).
Also, here's a KB that might help you with troubleshooting:
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I am having issues with syncing my calender and contacts

I would like for the changes that I make on my iphone to be primary. I have sync issues with the calender and contacts. New contacts get erased and some contacts are doubles as well as email addresses. My calender entries have been erased on sync. Can someone please help???

Check the parameters in your email account against what is recommended by your email provider.
Settings > Mail, Contacts, Calendars > account
Have you contacted the support contact at your email provider?

Issue with Date Format for Presentation Variables

Hi,
I am using dashboard prompts to capture begin date and end date in presentation variables. The dates selected from calendar are in the format mm/dd/yyyy.
In Asnwers I need to get a count of days between begin and end dates. I am using the column formula as shown:
TIMESTAMPDIFF(SQL_TSI_DAY, DATE '@{pBeginDate}', DATE '@{pEndDate}')
When ever I run the report from dashboard I get the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46046] Datetime value 1/1/2005 does not match the specified format. (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT "Transaction Dates"."Transaction Date", TIMESTAMPDIFF(SQL_TSI_DAY, DATE ''1/1/2005'', DATE ''1/2/2006'' FROM "Dates"')}
SQL Issued: SELECT "Transaction Dates"."Transaction Date", TIMESTAMPDIFF(SQL_TSI_DAY, DATE '1/1/2005', DATE '1/2/2006') FROM "Dates"
Can anyone help me to reolve this date format issue?
Thanks,
Aravind

Hi,
see this below links
Issues with Prompts calender date
Regards
Naresh

HT4623 Issue with anniversaries entry in notification drop down bar and calender app

Hi guys,
There is issue with notication dropdown and calender app in ios 7 which was not present in ios 6. The notification sync birthdays from contacts but only birthdays and not anniversaries.
same is with the calender app
what is the solution for this?

The problem is not with the phone per se. The problem is with Android 4.0 and your TB does not have 4.0. Because this phone is the "gold standard" of development for Android 4.0 it makes sense to report the problem here. If Verizon takes notice they will push the bug report up the food chain until some developer at Google or Samsung decides to fix it.

Issue with the shipping calender

Hi all
I couldn't solve one issue regarding the planning calender
Our company has a three day delivery period from the customer order date unitll the requested due delivery date
tha Factory calender has 5 days from Monday untill Friday as working days
with shifts from 00:00:00 to 03:00:00 & 03:00:00 to 24:00:00
and the shipping calender has 7 days with the time frame 00:00:00 to 03:00:00
When a sales orders are created for the saturday,sunday and monday
the purchase requisition for sunday and monday are pushed to tuesdays and the purchase requisition for saturday order is on the same day itself
I have to set the calenders in such a way that for saturday sunday I should be getting Prqs on Friday and planned orders on monday and friday as there is no production on saturday and sunday
I have tried various ways by extending the shipping calender on friday till 24:00:00
but I'm not getting the required output
Could you guide me thru the checks to be performed to solve this issue
Thanks
Maanav

Hi digambar
thanks for replying
The whole process is a three day process
When a customer orders the product it will be shipped in three days
Let's say a customer orders on monday 06/18 with a due delivery date on
next week thursday 06/28 then the planned order will be created on tuesday 06/26 and the purchase Requisition on wednesday 06/27 and the wave pick will be on Tuesday 06/26 and the product is shipped to customer on thursday
Accordingly the configuration was made with shipping calender from 0:00 to 3:00
on 5 days from monday till friday(the order which comes under 3 am window will be delivered acc to the scenario explained above)
and the production calender in shifts from 0:00 to 3:00 am and 3:10 to 0:24 hrs
But for the sunday and monday (delivery due dates) the orders purchase reks are being pushed to monday and tuesday , instead of behind promised on friday(before week), as there's no production on sunday and saturday and the Purchase reks and pld order should be created on friday itself (that's how the configuration is)
So I changed the shipping calender periods into shifts on friday (0:00 to 3:00, 3.00 to 24:00) even then there is no change in the pushed orders to monday
I only have this problem for sunday and monday orders
I'm not sure about how the purchase requisitions are created? Could you tell me how to check that? and what else I have to check for this probelm
the planning system is APO
I really appreciate your response
maanav

I am experiencing an issue with font size on a calender... see below

Apple discovered an issue with the file you submitted. The font is
inconsistent in places, and we want to make sure your calendar turns
out just the way you designed it. We’ve canceled your order— you won’t
be charged, and we have some suggestions for correcting the issue.
Please update iPhoto, change the theme of your calendar, then change it
back to the original theme.
Once completed, confirm the issue has been resolved by previewing your
calendar in iPhoto. Then place the order again once you’re satisfied
with how the calendar appears in preview.
If the issue persists after changing the theme, please contact Apple
Support for assistance. Just visit
<http://www.apple.com/support/iphoto/> and click “Get started” in the
upper-right hand corner of the page.
the fix is not working, I am using iPhoto 11, latest version, and trying to build a picture camera. Essentially the dates have gone really small. I can share a PDF.

See the More Like This section at the right. One user explained how to edit a file in the application to fix the problem of date and day fonts reverting to 6 pt. if any font size was changed.
OT

Issues with GoogleMail after updating to iOS 4.2.1

Hello,
yesterday I have updated my iPhone to 4.2.1.
Now I have issues with syncing my mails, calender and notes from Google.
All apps (Mail, Calender and Notes) crashed right after opening them. So I decided to create a new account on my iPhone. Therefore I deleted my existing acoount and started to configure a new one (Settings => Mail, Contacts, Calender => Add account => Google Mail). After filling the form with all necessary inputs (name, address, password and description) the app crashes.
Does anyone have a solution for this problem?
Thanks!
Chris

I just experienced the exact same thing after upgrading from iOS 4.2.x to iOS 4.3...
Now my iPad shows the picture of the white USB cable that tells me to connect to iTunes to (re)activate. After trying this nothing happens - except from a message in iTunes telling me that;
"There is a problem with your iPad.
We're sorry, the iPad you connected may be damaged and canot be activated for service. We recommend you to visit your nearest Apple Store for more information. To find your..."
Anyone else had similar exeriences?!

Re : Issue with the column display in Bex reports

Hello Gurus,
I have an issue with the reports in Bex, this is a bit confusing scenario I would try to explain in more details. A query was already built for monthly Report in Sales and Billing for which the variable were Calender month/year range 1 (mandatory), range 2 range 3 range 4. These 4 variable were created and moved to column rows in query.
Later the user wanted the copy of same report but he wanted the variables to be Calender date range 1 (mandatory), range 2, range 3 , range 4. I have created them with 0calenderday as reference and moved to the columns.
for the monthly report text variables were already existing for the Calender month/ year, but for the daily report text variable were not existing for Dates. I have created a text variable for the date in the following way processing by
" replacement path" and reference characteristic as 0calday and in the replacement path tab.. in replace variable the selection is info object, the next option Replace with " External charactersitic value key " .
By creating this text variable the dates were being displayed in the colum header like 11/01/2013 - 11/30/2013 which satisfies the requirement.
But the user wanted to see the report same like monthly report when the mandatory variable Calender year/ month is selected, the rest of the columns range 2, range 3, range 4 are displayed as unassigned in the report. but coming back to the daily report when the user is giving the Calender date rage 1, he is finding that Calender date range 2, range 3, range 4 are also being displayed with values. He want to see the Calender date range 2,3,4 as unassigned in the report just like monthly. Please find the images attached.
As Calender month/ year is predefined, if the calender range values are not given it would show up as not assigned default. I have created a separate text variable for Calender day, I believe that could be the reason rest of the columns are not showing up as unassigned. The user want to see them as unassigned like monthly report columns.
I tried different ways changing the text variables but I could not change the display of the columns in Calender date report by the option - replace with ----> External characteristic value key, key, label. when I chose the option external characteristic value then the date was showing up in the text of the column when report is run ( Please find the image for the reference in the attachment ). . I request you to help me out in this. Please find the images of the variables and output below.

Anshu,
Thank you very much for above code I made minor changes to the code that finally worked. I created 4 different text variables needed for Calender date range 1, 2 ,3 ,4. Please find the code below for the text variable that worked in the system
WHEN 'ZTEXT_CAL1'.
   READ TABLE I_T_VAR_RANGE INTO loc_var_range
   WITH KEY VNAM = 'ZCALDATE1'.
    IF loc_var_range-LOW = '#'.
      dt_low = 'Not Assigned'.
      dt_high = 'Not Assigned'.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ELSE.
      CONCATENATE loc_var_range-low+4(2) '/' loc_var_range-low+6(2) '/' loc_var_range-low+0(4) into dt_low.
      CONCATENATE loc_var_range-high+4(2) '/' loc_var_range-high+6(2) '/' loc_var_range-high+0(4) into dt_high.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ENDIF.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.

Ical syncing issues with iphone/imac after lion OS update.

Hi All,
I upgraded to lion and now have two issues with syncing my iphone and ipad to my imac.
First issue is that calander entries created on the iphone/ipad do not appear in the imac calander after syncing.
Second issue is that if I change an calander entry on my imac, the old entry and the new entry will show up on my iphone. For example. I created an event and accidently clicked out of it before changing the name. I then reopened that entry and changed the name and date. In my imac ical calender I only had one entry at the final date with the correct name. When I synced my iphone and ipad however two events showed up on the iphone and ipad. The original "new event", and the event with the correct name and date.
The same thing happened when I had the same event occuring for 5 days, I manual copied the one event five times on the one day and then dragged them to the correct days in ical on my imac. When I synced my iphone I had both the 5 entries on the one day, as well as the entries on the days I had dragged them to.
In summary, now when I look at my calander in ical on my imac it looks great, but on my iphone it has all these extra entries. It is as though when it syncs it shows me all of my previous entries and changes, instead of the actual current calander.
Any thoughts how I can get the imac and iphone icals to look the same?
and in case you were wondering, I dont use Icloud. I did set it up and turned it off after the duplicate entry problem that everyone has mentioned. I dont have that duplicate entry issue anymore.
Thanks
Adrian

From what your write, it is a little hard to tell, what exactly your problem is, though you may want to try the following, which helped me at time:
step one:
export all of your calendars one by one, including the one with entries giving you problems
step two:
erase all of your calendars and create a dummy character, check if syncing works with that one.
reimport the previously exported calendars one by one, redoing the syncing routines.
In the instances I had problems, I found that exporting and reimporting a calendar file usually did away with the problem
Also, at least on my machines, turning on the birthday link to address book, created some problems, so you might want to try without that feature too.
If you got everything working on one machine, another strategy can be to reinitiate syncing from that one, i.e. erase and reinstall the syncing process on the others. Just make sure you have an up to date back up of your entries.
Dirk

2 issues with OVI

Hi from Russia.
I've got 2 issues with OVI:
1. It does not sync phone numbers (Russian language E71 phone);
2. Recurrent events in OVI web-site are shifted 1 day left (e.g. 02.dec->01.dec). But on the phone calendar the dates are OK.
How to fix these problems?

I have a E71 and I have exactly the same problem with the syncing with shifted one day backwards ie. 16 Dec memo shifted to 15 Dec. Some other threads also reflect having the same problem with E71 and E66.
I have check all the timezone settings. Even re-setup my phone again with OVI and the problem still persist. Quite irritating as now I am afraid to update my phone calender from OVI as I afraid that it might mess up my device with the wrong sync dates. Now I only update from device to OVI.
If someone knows the solution to this problem. Please kindly email me the link to the thread. OVI is really a wonderful concept if it really works flawlessly.
Thanks

N82: issue with sett. wizard

Hi All,
I'm using a black N82 with the latest FW (V20.0.062) and whenever I try to open the Sett. wizard the phone is freezing (only the wallpaper is displayed). Only a restart (by removing the battery) recovers the phone. I tried also a reset to the factory settings but the problem remains...
Anyone knows a solution to this problem?

Thanks again for your prompt response.
I've never installed additional applications on my phone.
The following 'items' have gone 'into' the phone since purchase:
1. Mp3 songs.
2. Contacts via the sim directory.
3. a Powerpoint presentation via data transfer mode (nearly a month ago, but my issues with the phone surfaced a week ago....so no problem with the ppt i guess)
4. camera pics, MS outlook calender, to-do and Text messages routinely syncd between my phone and laptop.
5. Bluetooth transfer out of my phone to another phone for a transfer of pics taken.
Again many weeks ago not followed by adverse effects...
Thanks, it'll take me a while to understand SYNCML. Ill read and try to understand soon.
But then wont PC suite take care of contacts backup n restore,etc?
If so, where can i find the contacts stored in my computer and in what format?
For instance, the photos and text msgs - synced - are stored in Lifeblog folder under my documents folder and can be easily accessed via the LifeBlo application both on the phone and the computer/laptop.
PS: I also managed to update the software today, with the help of Nokia Software updater app on my laptop.
Keeping this all in mind:
I reckon, the m-card and perhaps phone memory are affected. Maybe the camera application as well.
If this is proved, i think, then i m-card format and hard reset is the way forward.
Thanks again.

I have issues with icloud backup.

Hi,
I am facing issues with icloud backup, i have successfully backed up data from iphone 5s to icloud with contacts, notes, calender, reminders etc.
Unfortunately i can not see the same information after logging in online from browser. After two days the data is restored to one year back icloud back up on my iphone 5s.
Need help on this.

A backup of an iPhone using iCloud does not result in the ability to log in to iCloud and view the information (i.e., to see the actual data that was backed up). You can go on your iPhone to Settings > iCloud > Storage > Manage Storage > device name and see how much storage the latest backup is occupying and when it was done.
Things like Contacts that are viewable when logging in to iCloud.com are the result of having Settings > iCloud > Contacts (as an example) turned on to sync - which is a different thing than a backup.
The results of an iCloud backup are only rely viewable when restored back to an iOS device. I'm not sure any of that explanation helps with your current problem but it might help clarify the terminology that Apple uses.

HELP with syncing Calender application.

I have Windows Live mail mail organizer programme on my PC and want to sync with my blackberry calender, I have desktop software 5.0.0.509 and it only gives me the option of syncing with Microsoft Outlook. Does anyone have any advice on how to add Windows Calender..? Or with what calender programs works best to sync with the Blackberry..
Thanks.

JBPbcn wrote:
Thanks for your advice.. How strange as I just downloaded it from the Blackberry website yesterday.. I have now gone again to the Blackberry website to download the lastest version of 6.0 Blackberry desktop software and it started downloading the same file as yesterday.. So I don't understand.. Can you give me a direct link to where I can download the latest software.
Are you 100% positive you are downloading the Desktop Software and not the Device Software? What is the exact filename of what you are downloading? All Desktop Software is available here:
http://us.blackberry.com/apps-software/desktop/
JBPbcn wrote:
Once having this issue solved, I am still a little confused as to whether I can sync my contacts from my Windows Live email PC program. It says it connects with Microsoft outlook, but with Windows 7 and wanting to access hotmail, the only email program that is compatible these days is WindowsLive mail program.. do you have any ideas or solutions of what program I could use that would be compatible with blackberry and my hotmail, my calendar and contacts?
Only those Organizer apps listed in the prior linked KB are compatible. To synchronize with your BB, you must use one of those.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My iphone 5c has stopped synching with my pc using calender thru microsoft outlook, any ideas on how I can get my iphone to synch with my calender on my pc in outlook again

my iphone 5c has stopped synching with my pc using calender thru microsoft outlook, any ideas on how I can get my iphone to synch with my calender on my pc in outlook again

Hello leighfromgold coast,
Thanks for using Apple Support Communities.
If you're having issues with syncing your Outlook calendar with your iPhone, then please follow the troubleshooting in the article below.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
Cheers,
Alex H.

Issue with my calender

Similar Messages

Maybe you are looking for