Issue with Nat type 3 on PS3

I'm having issues trying to connect my PS3 properly to the internet, i keep getting a NAT type 3 which restricts certain chat features. To start off I have the WRT54G firmware version 2.00.8
So, I have been trying to follow multiple tutorials on getting a NAT2 on my Playstation3. I have opened the correct ports, enabled UPnP, DMZ'd it, and gave it a static IP and i STILL get NAT 2
any suggestions?
Heres a video (http://www.youtube.com/watch?v=33H82_pMSOQ) of my connection settings and here is the Status page of my router:
Firmware Version: v2.00.8
Current Time: Sun, 19 Oct 2008 16:55:31
MAC Address: 00:0C:412:2F:5D
Router Name: WRT54G 
Host Name:  
Domain Name:
Login Type: Automatic Configuration - DHCP
IP Address: 192.168.2.10
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DNS 1: 192.168.1.1
DNS 2: 192.168.2.1
DNS 3:  
*please note my Ps3's Static IP adress is 192.168.1.250
Solved!
Go to Solution.

yea I called my ISP yesterday and explained my problem they said that they do not block any ports at all so it cant be from them anyway because i used to have a nat 2 then i reset my router which made it back to nat 3 so i know that it is possible o get it its just the router's screwing something up. I contacted link sys via phone and i explained my problem to the lady, she said she doesn't have enough authority to go into my router's settings but she can transfer me to that department, i say SURE but then she interrupts and tell me theres a fine of like $25 just for talking to them im like "yea, ill go look and see if theres a solution anywhere else"
so im definately not getting any help from link sys at the moment unless one of you guys wanna give me 25 bucks.
please though, is there anything that may be incorrect? i know it has something to do with the router but even though i tried everything everyone has said it still wont work please help!!! 

Similar Messages

  • How to Open NAT Type on PS3?

    How do i open NAT Type on PS3
    Need help

    When you run the network test on the PS3 what is shown?  what NAt type?

  • Does SAP or Oracle have an issue with these type of processors?

    Does SAP or Oracle have an issue with these type of processors?
    Intel Xeon X5260 & E5450    vs    Intel Itanium       PROCESSORS
    I want a Sales / Marketing URL link or white papers that talks about processor recommendations.
    SAP GUI  7.20

    > Does SAP or Oracle have an issue with these type of processors?
    >
    > Intel Xeon X5260 & E5450    vs    Intel Itanium       PROCESSORS
    >
    > I want a Sales / Marketing URL link or white papers that talks about processor recommendations.
    SAP does neither "recommend" nor "deny" any processors.
    If you check http://service.sap.com/benchmarks then you get a lot of machines with different CPUs/operating ssytems and database combinations.
    Choose the one that suits best for you.
    Markus

  • Issue with Message Type Triggering during Inbound Delivery Creation

    Hi Experts,
    Hi Experts, 
    Currently we are facing issue with message type triggering during inbound delivery creation:
    In NACE transaction for Inbound delivery we have 3 custom output types:
    Pricing Procedure Used is standard one -> E10001
    Z140  Inbound Delivery Create  (This should get triggered when IB delivery is created)
    Z141  Inbound Delivery Change (This should get triggered when IB Delivery is changed)
    Z142  Inbound Delivery Delete(This should get triggered when IB Delivery is deleted).
    At present if i check delivery in  VL33 -> Extras -> Delivery Output
    Both  Z140 and Z141 are being triggered during IB delivery creation. While it should be only Z140.
    Could you please suggest that are we missing any configuration in SPRO or we need to create any custom routine (requirement) to handle this?
    Thanks

    Hi,
    There is no fine-tuned control for inbound delivery messages as for Purchase order. Hence I guess to meet your above requirement, you have to go for a custom solution similar to the PO fine tune control settings.
    Thanks,

  • Open NAT type on ps3

    When i got my BT home hub 4 in and set my ps3 my nat type was strict... I logged in to the homehub manager and set the ip address as static (i think as thats what id read online to do) anyways it is now on moderate ... How on earth do i get the NAT type to open?? Please help its driving me crazy

    Hi Lesleykelly28
    This link has no info on the Hub4 but the process should be more or less the same and the Hub 3
    http://bt.custhelp.com/app/answers/detail/a_id/32216
    give it a try and let me know how you get on.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Cant get open nat type for PS3, it use to be but wont go back

    im on Fios with the verizon router. I had the DMZ set to an ip with the PS3 also on it. the nat type was open and all was ok. I dont know how long its been this way (guessing not long because I have sucked at COD this week!) but I noticed im not at moderate. I checked the DMZ and the ip was still there. looked at PS3 and it was empty for some reason, so I put the ip back. ive restarted and tried other IPs andit will not go back to open. ive looked at youtube tutorials to be sure that im not missing anything but the vids seem tobe older because I have more options on the router settings than what the vids show, guess I have newer firmware. Any suggestions?

    actually, Open is what you want. you have a lot better preformance online when dealing with fast paced games like COD. you will really notice a difference. generally you just designate an IP in the DMZ settings of the router, then tell the PS3 to only use that IP, and thats it. just seems now on my end thats no longer the case and cant get it to go 

  • Issues with Airport Extreme/Express/PS3 network

    I have searched and searched and cannot find the answer to my problem. In my house I have an Airport Extreme, a Linksys switch, and an Airport Express all creating my wireless/ethernet network in the house. Since day one, my PS3 joined our network and I have been able to get online, no problems. Recently though I have decided to attempt to get the horribly difficult NAT type 2 with no success.
    Right not I have the Extreme acting as the WDS main and the Express (which delivers perfect connection to the PS3) acting as a WDS remote in Bridge mode. The Extreme is sharing a public IP and I have a DHCP reservation for my PS3 (using the default 10.0.1.253 IP) along with all the PS3 necessary ports forwarded. I have also set up the Extreme to set my PS3 as the default NAT host.
    My problem is that I get a "Conflicting DHCP Range" error. I also get a lot of warning messages every now and then saying "10.0.1.x is already in use by *MAC address* 10.0.1.1". I still can get on the internet with my computers and PS3 but I have noticed that signing onto PS network works very rarely.
    I absolutely cannot make sense of this. I also don't have my NAT 2 so can anyone help me.

    Is the PS3 connected to the express over WiFi or plugged into the ethernet port on the express or both?
    You should not need forward ports and set the default NAT host. Just setting the default NAT host will forward all traffic that is not sent to another host to the PS3. I would recommend forwarding ports instead of using default host for security reasons.
    You could also try setting static IP info in the PS3.

  • Issue with paper type when remote printing

    Hello
    we have an issue with printing from redirected printer
    on the local machine Windows 8.1 i have a printer installed and when i try to print from a remote pc to my installed printer on my local pc the paper type is replaced.
    on the local printer it was set to letter but on the remote the redirected printer is set to legal.
    i try to switch it to letter but it was not kept it switch back to legal.
    any adviced will be good ?
    Thanks

    Hi,
    We may try to test this and will get back to you as soon as we get outcome.
    In addition, here is a Print/Fax forum below you may get more insights from print experts:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverprint&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • Issue with Mvt type 311

    Hi friends,
    I have a issue with stock transfer from one storage location to another with transaction MB1B using movement type 311.
    When ever we transfer stock for a material, it transfers from unrestricted to quality restricted stock. eg. if a trasfer from 0001 sloc to 0002 sloc, then it will transfer 0001 unrestricted to 0002 quality inspection.
    Can plese some one tell me where these settings are maintained?
    Thanks,
    Rohit

    Hello,
    This is not the SAP Standard Practice,
    While transfer of material from one storage location another stoarge location thorugh 311 movement type, the stock type should be same in both the storage locations.
    you can directly transfer from Unrestricted  0001 storage location to 0002 Storage location (quality inspection), before that you should match both stock type , through respective movement type 321 or 322.
    then you can transfer one storage location to another (stock type should be same)
    Regards
    Mahesh Naik.

  • Posting Data Issue with IDOC Type : COND_A03

    Friends,
    I'm posting the data from Middleware(Message Broker) to SAP using the IDOC Type : COND_A03 with Message Type : COND_A.
    For this IDOC,I'm populating the below Segment's data.
    Segement :E1KOMG:
    Fields:
    KVEWE,KOTABNR,KAPPL ,KSCHL,VAKEY ,KONDA,MATNR .
    Segement :E1KONH:
    Fields:
    KNUMH,DATAB,DATBI
    Segement :E1KONP:
    Fields:
    KSCHL,STFKZ,KSTBM,KSTBW,KRECH ,KBETR,KONWA,KPEIN,KUMZA,KUMNE,MXWRT,GKWRT,ZAEHK_IND ,KBRUE,VALTG,
    VALDT,ANZAUF,MIKBAS,MXKBAS,KOMXWRT,KLF_STG,KLF_KAL
    Problem:  In SAP, IDOC's are processing successfully with status 53 and updating the tables : KONH,KONP  successfully.
    But Table A957 which is passing against KOTABNR field is not pupulating with the Materials passing.
    Can anyone please guide me why the Materials are not populating in the table : A957.
    Regards,
    Sreeram

    Hi,
    I guess there might be some issue with VAKEY population.
    All the key fields in A957 should be concated properly while populating VAKEY. (Leading zeros must be prefixed to the material)
    Regards,
    Ganga

  • NAT Type for PS3

    My PS3 tells me I have a "Strict" NAT type and it has limited my gameplay. What do I do to make it open? It would really help.

    To change the NAT type on your PS3 you need to open the PS3 ports on your Router.Click here and follow the steps to change the NAT type on your PS3.

  • Issue with conition type

    hi,
    i am facing an issue with a condition type for custom charge in PO.
    when i create PO , i manually  add gross price and  custom conditions  in PO .
    then i do GR for this PO but now i have to change custom charge in PO, so i reverse GR .
    but now i can only gross price in PO .
    custom conditions are in display mode only.
    how should i make this condition editable?
    PO is generated from third party sales order.
    thanks.
    akkshaya

    Hi,
       From your question if I am able to understand correctly is that you are trying to change the value in custom duty condition type.
    Custom duty condition types are of delivery cost nature means these conditions have condition category B.
    Delivery cost conditions can not be changed in PO once GR done.
    Go to M/06, see your condition type, you will find that in condition category it is B, that is why you are not able to change.
    Regards
    Rajesh

  • Error in Goods issue with movement type 541

    Dear Users,
    I have created a Sub contracting PO. After that when i m issuing the goods to vendor with movement type 541, its giving the following error: Movement type 541 is not planned for this operation.
    Please help me out

    You can provide material to vendor either using Transaction codes :
    1.  MIGO - Transfer Posting - Other - Movement type 541
    2.  MB1B - Movement type 541  or
    3.  ME2O - Mention the vendor & execute
    S. Kumar

  • Issue with Movement type

    Dear Experts,
    I am facing issue and in understanding with movement type 103,105 and 106.
    Purchase order has been created with 100 pcs
    1) Movement type 103 made for block stock.
    2) Movement type 105 to remove stock from block stock.
    3) Movement type 106 to reverse 105?
    When I try to check EKBE table it shows me different entry
    Purchase document EBELN compare with Reference document LFBNR
    Movement type 103     Reference document is same document number
    Movement type 105     Give reference document number as 103
    Movement type 106     Give reference document number as 103.
    Question - Why Movement type 106 show reference document number of 103.              
    Thanks
    AB

    hi,
    Please check the table MSEG. for 106, it will have reference for material document of 105
    field SMBLN instead of LFBNR
    With this field, you can go for the logic.
    select all docs from EKBE
    Moreover, you can use field MKPF-XBLNR for getting the delivery note field which will be same for cancelation docs. for ex 105 and 106 wil have this same value
    this field will make it easy for you to group the GR and their reversals for calculations.
    Regards
    Vivek Singh

  • Open NAT type on PS3 from moderate?

    Hey,
    Ive been wanting to get an open NAT type for a while, ive been unable to would anyone be able to help me?,
    i have a BT Infinity Hub 3, im currently on Moderate NAT type
    Many Thanks,
                         Sean

    Hi Matt,
    Welcome to the forum and thanks for posting. Take a look here for some information on port forwarding. I've also found this whcih you might find useful. Let me know if it helps.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Maybe you are looking for