Issue with Net price at Purchase order / Line item

Dear All,
I have an issue in the Purchase order, given below is the detail of the issue.
PO/LI1 Consists a material A (Grid based), and with a condition record i have maintained sizewise pricing.
Eg: Size L - 1usd per 1, Size M - 2usd per 1 and Size S - 3usd per 1. Assume the quantity for each size been 10
Thus at a Schedule line item level it would be as follows
Grid   | Schedule Qty | Net Price
S              10                  3
M              10                  2
L               10                  1
Thus at a PO/ Line item level the net price should be (6/30)that is (net value/net quantity) = 0.2 per 1, in my system it doesnt show like as 02. per 1, it shows the net price of size L (in this instance it picks the price of size L and shows it as the NET PRICE at PO/LI Level
What could be the possible reason this could happen, i believe this is a problem.Is there a place in configure where i can change the system to capture Net price at PO Line item =(Net Value / Net quantity) rather than picking the price of the size L.
Other info
Size L is the last Delivery Schedule line number
Hope my question is clear.
Thanks & Regards
Shabeen
Shabeen Buhary
Edited by: shabenn on Dec 17, 2010 10:13 AM

Hi,
Even though you maintained different Prices for Different grids only default grid value only displayed at line item level. But if you do GR for those grids valuation will happened at as you mentioned the purchase order.
regards,
Siva reddy

Similar Messages

To add Net price in Purchase order

Hi,
I have a sceneria where i need to add net price against line item which was marked as free in purchase order (Net price is 0). Subsequently material was deliverd from vendor and GI also was done. Goods receipt is also completed. This material batch number is consumed for custmer sales orders subsequently. There is 0 quantity available for this material in the plant. Now the user wants to change the net price to 2 for the line item. To change net price in purchase order, we tried to cancel GR material document.But we get an error that 'Deficit of unrestricted use' for the batch number.
Can any one give us solution for changing the net price in purchase order?
Regards,

Hello,
the only chance to add a PO price is to unflag the free flag in ME22N. This is only possible when quantity received for the PO is zero. Therfore you must reverse the quantity received by doing a dummy receipt for the batch, reverse the GR for PO, you change the flag, set a price, redo GR for the PO, reverse the dummy receipt.
Hope this helps, regards
Michael

Price changes in Purchase order Line Items its displaying as"WF-BATCH"

Hi Experts,
I need some Information about Price changes in Purchase order Line Items,In PO Documents Price changes through this wf-batch has changed the value of this row to xxx.xx USD, which does not correspond the invoice.
If i selected the Item changes in the Purchase Order its displaying as"WF-BATCH".
So please try to clarify where this batch originates from.
Brgds,
RK

Hi Jurgen,
Thanks for your reply.
But how i can check this in Purchase orders,on what basis this price changes information is recorded in PO Line Item level.
can you pls guide me some steps to check the price changes through WF-BATCH.
Brgds,
RK

Can I modify the column "Net Price" of purchase order to display 3 decimals

Dear expert,
     Can I modify the column "Net Price" of purchase order to display 3 decimals?
     Looking forward to your reply.
     Many thanks.
Best Regards,
Merry

Hi,
You can easily change ur decimal place in OY04 by seeting number of decimal place to ur currency.
But be careful as it cause a huge effect to ur finance documents, read system message carefully before applying.
Regards
ManUfacTuReR

Total net price of purchase order

hi,
i want total net price of purchase order . In that purchase order have two positions. how we can add this two position price.

In the table EKKO - netwr . or EKPO field netpr .

Purchase order line item block

Hi,
Need to understand in what circumstance Purchase order line item gets blocked automatically. I have a situation in which net price is 0.01 and line item has got blocked automatically. This is through conversion objects(using BAPI_PO_CREATE). When manually created this works fine. Where can i see this standard behavior in customization. Any additional inputs will be helpfull.
Regards,
Kishan

A BAPI is just a program that cannot do anything if it does not get filled with data.
How does it get the data? What is made with the data in a framework program before the BAPI is called? This is were you or you ABAPer has to start analyzing. Of course the BAPI is not changed, but the data has to be read from a source and need to be transferred to a internal table which is then transferred to the BAPI. This all happens in a program that is developed by a programmer. Or do you call the BAPI via SE37 ?
SAP does not set an item block by itself, SAP gives you an error message and stops you from saving, or gives a warning message and you confirm that you read it and can continue.

User Exit for Purchase Order Line Items.

I have been trying to search for a User Exit for Purchase Order Line Items and have been unable to do find anything. I need to overwrite the Net Price and Pricing Condition on a certain type of material based upon the Pricing Condition for that Line Item which is on the Sales Document. Any direction you can point me into would be greatly appreciated. Thanks.

Thanks for pointing me in the right direction. I was able to create my first BADI using the PROCESS_ITEM method. The following link was also very helpful: Re: BADI ME_PROCESS_PO_CUST Method:PROCESS_ITEM

In Purchase Order Line item Maintaining Serial Numbers for Material Codes

Dear Gurus,
We have a business process in legacy system for Purchase Order like in PO line item, Material code with description, Quantity, unit of Measurement, Serial Number Start and Serial Number End is maintained, for example for Material code when we enter the data AXMLN00001 in Serial Number Start column, if the Qty 500 is maintained, by default system will calculate AXMLN00500 in Serial Number End column.
We understand that in standard SAP we donu2019t have this option of maintaining Serial Number Start and End in Purchase order Line item. Please let us know how this can be mapped and is it advisable to create two Z fields in EKPO table or else can we make any development.
Suppose if this is not possible in SAP for PO then in Banks if we want to place a order for Cheque books how we can maintain Start and End Serial Numbers to print in cheque books.
Also client is not agreeing to maintain manually Serial numbers in item text.
regards,
Dhanu

Aamir,
When the PO Item was created say for example Material had Valuation category "Y" and latter you wanted to change the category to "Y". Now system would have check for all open PO's etc...based on this you must have set Deletion Indicator to this Line Item to allow valuation category change in material master. Now when this Item got created in the table level (EKPO), system updates the valuation category "Y". Currently this valuation category is not active so it would not allow you to perform removal of deletion indicator as program cannot automatically nor you have an option to manually update the valuation category to this Item.
Regards,
Prasobh

Purchase order Line item Excise Details

Dear All..
In purchase order line item Excise Details Basic price and Excise 14% and 2%cess and 1%Se.Cess And cst 4% Are Stored in Which table.. or any standard report available for this.. Please Resolve this.
Usefull Threads will Be Rewarded..
Thanks & Regards
Kumar

for excise check table J_1IEXCHDR for header
J_1IEXCDTL for item excise
The Table name used to find the Tax Values are
KOMV: Pricing Communications-Condition Record
KONV: Conditions (Transaction Data)
From the above tables you can refer the fields below.
KAWRT
KBETR
Fetch the corresponding records based on the field
KNTYP
hope it help
regards
kunal

One inspection lot for multiple materials of purchase order line items

Hi All,
My client requirement is one inspection lot for multiple materials of purchase order line items.
Please share your thoughts.
Thanks in advance for early reply.
Regards,
Jishu

I totally agree with Amol.
I don't think I would touch that development nor would I ever tell a client it could reliably be done through development.
Knowing what I know about the table structures, I don't think you could create any development for this that could use a significant amount of the existing tables and functionality. I think you'd have to create all your own Z tables and basically rebuild the functionality. Tying it back in with SAP data will be difficult.
You're even looking at all custom screens for your results recording and UD as well. And if you have follow-on functions like batch classification requirements, batch determination, COA publication, results copy functions, use of DMR and sampling procedures, physical samples, quality notifications, etc. etc.. you could be looking a whole lot of development.
Craig

Which table stores the condition values of a purchase order line item?

Hi,
Please let me know the table that stores the condition values of purchase order line items(when we click on conditions tab after selecting an item then we can see the condition types and there is a corresponding condition value for that condition type.
My requirement is to get the actual price for a purchase order line item(it can be seen in the last line and it is calculated after considering all the condition types) and display this value in a custom report.
Thanks,
Ravindra

Hi Ravindra
You can find the conditions data for PO in TAble KONV.
KONV-KSCH is the condition type
KONV-KWERT is the cond value
KONV-KNUMH is the condition doc no. which is there in EKKO field KNUMH.
So u have to make a link between KONV-KNUMH and EKKO-KNUMH.
Thanks
Vijeta

Making the Net Price on a PO line item 0 if Free Indicator set on PO line

Hello All,
I have a requirement to make the Net Price on a PO line item 0 if Free Indicator (UMSON) is set on PO line.
Please help me with an exit/badi using which this can be achieved.
Thanks
Indrajit

Hi,
Check this user exit
EXIT_SAPMM06E_012.
This user exit is triggered before saving the PO.
Regards,
Sachin M M

Creating inbound delivery for the purchase order line items

Hi Experts,
Please let me know how can I create inbound delivery for the purchase order line items? Say, I have a purchase order with 5 line items in it. I wanted to create an inbound delivery for only 2 line items at this point of time. Which SAP Standard transaction I have to use and what all data I need to populate? I would appreciate any help on this and will reward the right answer. Please let me know.
Thank you in advance.
with regards,
Muthu Ganapathy.

Hi,
While creating the inbound delivery (VL31N), intially all the items will be shown, see the advance shipping notfication - from the vendor for which he has send confirmation & rest items you can delete simply & save. & next time when the vendor sends rest advance shipping notifcation (confirmation), you can receive them.
Hope this answers your query.
Regards
Irfan.

Restrict purchase order line item selection in MEMASSPO

How to restrict in authorizations of role which purchase order line item can be selected by user in the memasspo.
I have a scenario where Business wants that no user should be allowed to select all the Purchase Order line items rather should be displayed sub set of the entire purchase Order line items while attempting to do mass change in the PO created.
Thanks & Regards,
Abhimanu

The mass transaction is meant to change many POs and their items at one time.
The user can not change anything with mass which he cannot do in ME22N.
if he can do it in ME22N, why should he not be able to do it in MEMASSPO?
Based on what criteria should a item be restricted from a change in your special case, how do you define your subset?

Free of Charge indicator in Purchase Order / Line item

Dear All,
Is there a table where i could locate if a particular purchase order / line item has the FOC tick maintained. I went through quite a few tables and am unable to locate the same.
Or is there any other logic from which i could derive if a particular Purchase Order / Line item is FOC or not.
Shall await a reply
thanks
shabeen buhary

Dear,
The 'Free Items' indicator in the overview is only used to facilitate the switching off of the Inv.Receipt flag and the GR-based IV flag.
Note that the 'Free Items' indicator is not stored on the PO item table EKPO.
The Inv.Receipt flag (and the GR-based IV flag) are the fields that really controls if an item is 'free' or not.
So, the field is initiated based on the values in those fields rather than from input from the user.
When an invoice is expected it's not a free-item. This indicator invoice receipt is chosen from the main-item and also from the
customization maintained for item category 0 in table T163.
Regards,
Syed Hussain.

Issue with Net price at Purchase order / Line item

Similar Messages

Maybe you are looking for