Issue with new folder but no name

I just downloaded some apps and wanted to put them together in a folder, so I did what I normally do - drag one on top of another.  The folder was created but it has no name nor is there a place to enter one.  I've never had this happen with this iPad or my older one.  FYI, this is a 4th gen iPad with software updated to 7.0.4.  I did a restart but that made no difference.  I also dragged two apps out of an older (named) folder to see if I could create a new named folder with them - same problem - the folder is created but no name.
Help - any ideas??

That doesn't work if there is no name to begin with.
This is a known bug if you are trying to create a folder using any app from the food and beverage category to create your folder. Who knows, there may more categories now. You'll create a folder with them and not only is there no name, there is no name field. The repeated advice Apple support gives us is to just hit return and enter a new name. This, of course, is like telling somebody to change channels on their modern TV using the knob if they can't find the remote. What knob? Since there is no name field, there is no keyboard, there is no return, there is no nothing. It's a very frustrating bug, and another one that Apple doesn't acknowledge (much like the repeated ipad4-with-retina crashes with the latest version of ios 7) even though many many users know about it. However, there is something you can do to get your name field.
To work around it, take any two game apps and make a folder using them. Then rename the folder anyway you want, add your food and beverage apps (or whatever app isn't working with the naming), and then remove the games.

Similar Messages

  • Hey,i forgot my login password,so i changed the password by using terminal command(reset password).now i have new user name with new password,but i can't find  my data which i have saved on mac.please help me out in this matter.

    hey,i forgot my login password,so i changed the password by using terminal command(reset password).now i have new user name with new password,
    but i can't find  my data which i have saved on mac.the storage is showing data used and free space on the disk
    please help me out in this matter.

    How did you change your user name?
    resetpassword wouldn't have done it. If you managed to create a new user, then your data is still in the old account.

  • I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
    What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

  • When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

    When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
    I have attached the url of the unwanted site.

    Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

  • HT4623 Hi, every body please help trying to update my I pad with new iOS but there is no soft wear update tab what I am doing wrong

    Hi,
         all trying to update my iPad with new iOS but when in the settings tab there is no software update tab
    What I am doing wrong please or i,m going to throw it

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes as described half-way down the page that you posted from.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand sidebar of iTunes and selecting 'Backup' (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC)
    Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    A first gen iPad will be updated to iOS 5.1.1, and an iPad 2 and 3 to iOS 6.1.3

  • How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    It's hopelessly outdated. It's simply not compatible.
    Mylenium

  • Replaced my hardrive with new one. but when i turn the computer on, the hardrive doesnt show. pls help.

    Replaced my hardrive with new one. but when i turn the computer on, the hardrive doesnt show. pls help

    Before installing a new drive - it is generally better to install it in a external usb enclosure and connect it to your Macbook so you can format/erase the new drive and make an exact clone of the drive you wish to install, unless you plan on doing a clean install.

  • HT4623 I have issues with purchasing apps, but I can download free apps. Error telling me to contact apple?

    I have issues with purchasing apps, but I can download free apps. Error telling me to contact apple?

    Then contact iTunes support like the message said:
    Apple - Support - iTunes - Contact Us

  • Overwrite crystal report file name with new version but keep history

    I am writing a Crystal Reports .NET SDK in C# code to upload a crystal report files from its destination to CMC folder on BO XI R2 Platform.
    On "Upload Button" click_event, validate the two check boxes controls named "Keep History", and "Remove History". Once "Keep History" check box is selected, check If the SAME report file name exists in the same destination CMC folder, if Yes, overwrite it BUT Keep the History and all its associated objects like "recurring objects". If "Remove History" is selected, then remove the existing report and upload the new report file name.
    Please provide me some codes on how to do this task. This is definitely a "WIN" - "WIN" effort and contribution to my Team Goals.
    P.S. This is a similar scenario when you are uploading report on BO Enterprise R2 CMC.
    When Uploading a new report to a folder but same report file name exists, the BO System will promt message "Report File Name" already exists. Do you want to Overwrite it?" If Yes, then system will overwrite the file but it will keep the history and recurring objects.
    Any help would be greatly appreciated.
    Thanks,
    Bien

    Suggest looking at [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/NETBusinessObjectsEnterpriseSDKSamples] wiki for links to pertinent samples. Also, check out the [Developer Help File|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/WS_SDK/wssdk_server/default.htm]. Searching these forums for similar queries may also prove to be fruitful
    Ludek

  • TS4124 i didnt have issues with itunes before. but pc asked to download new version. i did. when i click itunes i get my original music, but when i click store...i get nothing. i watched tutorial...wont open itunes store. im looking for  music

    i didnt have issues with itunes before...but pc asked to download new version. i did. when i click itunes i get my original music, but when i click store...i get nothing. i watched tutorial....but still cant open itunes store. im looking for music to buy.

    Hello bogley
    Check out the article below for troubleshooting access to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G. 

  • Issue with new abap webdynpro INBOX EHP5

    Hello Experts,
    I'm currently working on the configuration of ESS/MSS services in EHP5. We are using different services like Appraisal OSA, Learning solution,etc. I already configured the Launchpad ESS, it's working fine but now I have an issue with the new Abap webdynpro INBOX. The employee and manager see their workitem notifications correctly in their respective inbox.(I'm calling application: IBO_WDA_INBOX that I integrated in my launchpad).
    My problem is that when clicking on a workitem in order that it opens me the appraisal document (in edit or display mode), I got an error saying: "There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator."
    I did some search on SAP help without any results. I'm wondering how should I register workflow tasks? I saw there is a table called IBO_C_WF_TAS (I added entries e.g:
    IBO_WDA_INBOX TS99700031   EXECUTEAPPRAISALDOCUMENT).
    I tried also to register all my custom tasks in transaction SWFVISU.
    example:
    TASK: TS99700013
    Visualization Type: ABAP Webdynpro
    APPLICATION:    HAP_MAIN_DOCUMENT
    DYNPARAM   :    sap-wd-configId=HAP_AC_MAIN_DOC
    NAMESPACE :    sap
    SYSTEM_ALIAS: SAP_Webdynpro_XSS (I did create a system in sap portal under System Administration with as AS property /webdynpro/dispatcher )
    Could you let me know what could be wrong, what I missed? Shall I create an iView, if yes which one? which properties?
    I would really appreciate any help.
    Thanks!

    Hello Siddharth,
    Thanks for you reply. Still the same issue. Following are the config I did till now:
    In the PCD I created a new business object (SWF_WIOBN), an operation linked to the object (NAVIGATE).
    I did create an iView (powl) in the custom folder, I integrated the operation within iView. I created a page that contains the iView.
    In the properties of the iView I gave:
    Application Name: HAP_MAIN_DOCUMENT.
    Launch in New Window: "Display in separate Headerless Portal Window".
    System: SAP_ECC_HumanResources
    I added the required entries in tables:
    IBO_C_WF_TTAS
    IBO_C_WF_ACS
    IBO_V_WF_TAC
    IBO_V_WF_TTAC
    etc...
    I saw in the code of linked feeder class: CL_IBO_INBOX_FEEDER_WI  that it's checking something called "Launch_Editor".. Is it a property that we can set somewhere?
    Following are the parameters retrieved by system:
    BO_NAME       =  SWF_WIOBN
    BO_OP_NAME = NAVIGATE
    LAUNCHER_PARAMETERS ->  empty.??
    BO_RESOLVE_MODE = USER_SET_OF_ROLES
    LAUNCH_EDITOR  empty where must be set?
    At the end I still get the error:
    There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator.
    Any advice,
    Thanks in advance

  • Horrible issues with new iTunes update

    I am having a few issues with the new iTnes update:
    I cannot find a way to view the album artwork in the bottom left-hand corner like I used to. I can't find the option anywhere! I want to see it.
    Some song files have had their song titles, album titles, etc. changed from what I had them listed as. For example, my Footloose file, which used to say the song title was "Footloose" and the album as "Footloose", now shows the song title as "Footloose (from 'Footloose')" and the album title is blank. When I go to try to change it back, it is all greyed out and will not let me change it!
    Song files that I had put in more than one album artwork for, (if the song appeared on more than one album, including greatest hits albums and sountracks) the update now lists them as all individual songs from each one of the albums, so I have tons of repeats. I want it to go back to showing me all the album artwork for ONE file.
    This new update has completely destroyed my iTunes library. I am NOT HAPPY.

    Well its simple. Just go to your finder and search for iphone. You will find a backup folder. But, you should just be able to restore your iphone. Then after restore it will ask which backup your will like to use. Then in the drop down menu select your phones name and it should restore all contacts,text messages and notes as well as bookmarks. It worked fine for me until I used iFuntastic and Apptap. I guess it alterd the backup file and deleted all my notes. So, unless you have "hacked" your phone it should restore and re enter your info fine.

  • Strange issue with new Cisco Catalyst 2960 (IOS)

    Hello all,
    I am upgrading a older 2950(100M) switch replacing it with a gigabit 2960. Installed it in the same rack, the configuration is practically non-existent just set the passwords and IP. We run a single VLAN flat network for this so I started out by patching it to the existing switch, after a few days we had an opportunity to migrate because there was some downtime so I disconnected the cables on the old and moved them to the new.. Everything seemed fine, there is connectivity and things operate, but a few days later we noticed that some network transfer activities are slow. There are no errors or log entries showing on the new switch or the old one, but the low throughput is persistent.
    All ports show 1G Full duplex as they should, but what I see when I test is that traffic tests look almost asynchronous when passing switch boundaries with normal read speeds and slow writes. Reversing the direction of the test hosts I get slow reads and fast writes so it seems to 'stick' to one side of the traffic path. Testing the same equipment against differente targets without the switch boundary crossing does not show the problem. All Intra-switch tests look good (gig switches transfer near a gig and 100 switches near 100), but the moment there is a crossing things behave strangely regardless of the target (new switch is center backbone with most hosts, but does no routing). Network layout is essentially a T with everything radiating from the new switch. I can eliminate the old switch soon, but I still need to resolve the problem with the crossing to the other switch.
    Everything seems to point at the inter switch links. One is a patch cable under two feet, and the other is a dedicated fiber site link. We had the vendor confirm that the site link showed no issues, but having the same symptoms on both links makes me suspect the switch has something odd happening..
    I checked for duplex issues first, but didn't find any. I flushed the arp caches in all of the switches (3 total) and all of the computers as well, but the problem persists.
    Could this be an STP issue ?   If so how can I set this switch as the STP root and force a refresh..
    Any help would be greatly appreciated.

    Hi Paul,
    That was my concern and why I worried about making a change from remote, things are not as they should be.
    Here is the output for each switch..
    ======================================================================
    First the old switch (originally old switch connected to remote directly port 24 fixed speed/duplex and no other config)
    C2950Calidad#show spanning-tree vlan 1
    VLAN0001
      Spanning tree enabled protocol ieee
      Root ID    Priority    32769
                 Address     0013.7f23.0000
                 This bridge is the root
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
      Bridge ID  Priority    32769  (priority 32768 sys-id-ext 1)
                 Address     0013.7f23.0000
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
                 Aging Time 300
    Interface        Role Sts Cost      Prio.Nbr Type
    Fa0/2            Desg FWD 19        128.2    P2p
    Fa0/16           Desg FWD 19        128.16   P2p
    Fa0/21           Desg FWD 19        128.21   P2p
    Fa0/22           Desg FWD 19        128.22   P2p
    C2950Calidad#sh run int Fa0/22
    Building configuration...
    Current configuration : 34 bytes
    interface FastEthernet0/22
    end
    C2950Calidad#sh int Fa0/22
    FastEthernet0/22 is up, line protocol is up (connected)
      Hardware is Fast Ethernet, address is 0013.7f23.0016 (bia 0013.7f23.0016)
      MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
         reliability 255/255, txload 11/255, rxload 3/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Full-duplex, 100Mb/s, media type is 100BaseTX
      input flow-control is unsupported output flow-control is unsupported
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 00:00:20, output 00:00:01, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 1229000 bits/sec, 716 packets/sec
      5 minute output rate 4361000 bits/sec, 800 packets/sec
         1543435357 packets input, 1281752172 bytes, 0 no buffer
         Received 3977688 broadcasts (0 multicast)
         0 runts, 0 giants, 0 throttles
         0 input errors, 0 CRC, 0 frame, 0 overrun, 4346 ignored
         0 watchdog, 2032103 multicast, 0 pause input
         0 input packets with dribble condition detected
         2298226914 packets output, 1725074683 bytes, 0 underruns
         0 output errors, 0 collisions, 2 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier, 0 PAUSE output
         0 output buffer failures, 0 output buffers swapped out
    C2950Calidad#sh int Fa0/22 switchport
    Name: Fa0/22
    Switchport: Enabled
    Administrative Mode: dynamic desirable
    Operational Mode: trunk
    Administrative Trunking Encapsulation: dot1q
    Operational Trunking Encapsulation: dot1q
    Negotiation of Trunking: On
    Access Mode VLAN: 1 (default)
    Trunking Native Mode VLAN: 1 (default)
    Voice VLAN: none
    Administrative private-vlan host-association: none
    Administrative private-vlan mapping: none
    Administrative private-vlan trunk native VLAN: none
    Administrative private-vlan trunk encapsulation: dot1q
    Administrative private-vlan trunk normal VLANs: none
    Administrative private-vlan trunk private VLANs: none
    Operational private-vlan: none
    Trunking VLANs Enabled: ALL
    Pruning VLANs Enabled: 2-1001
    Capture Mode Disabled
    Capture VLANs Allowed: ALL
    Protected: false
    Appliance trust: none
    ============================================================================
    Now the new switch (at center between other two, patched to above, fiber dedicated provider link to remote)
    This includes two port command sets because it's in the middle interconnecting the other switches.
    CISCO-2960-48-GB-ASP#show spanning-tree vlan 1
    VLAN0001
      Spanning tree enabled protocol ieee
      Root ID    Priority    32769
                 Address     0013.7f23.0000
                 Cost        19
                 Port        48 (GigabitEthernet1/0/48)
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
      Bridge ID  Priority    32769  (priority 32768 sys-id-ext 1)
                 Address     f41f.c2dc.9b80
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
                 Aging Time  300 sec
    Interface           Role Sts Cost      Prio.Nbr Type
    Gi1/0/2             Desg FWD 19        128.2    P2p
    Gi1/0/3             Desg FWD 4         128.3    P2p
    Gi1/0/4             Desg FWD 4         128.4    P2p
    Gi1/0/5             Desg FWD 4         128.5    P2p
    Gi1/0/6             Desg FWD 4         128.6    P2p
    Gi1/0/7             Desg FWD 4         128.7    P2p
    Gi1/0/10            Desg FWD 4         128.10   P2p
    Gi1/0/11            Desg FWD 4         128.11   P2p
    Gi1/0/12            Desg FWD 4         128.12   P2p
    Gi1/0/13            Desg FWD 4         128.13   P2p
    Gi1/0/14            Desg FWD 4         128.14   P2p
    Gi1/0/15            Desg FWD 4         128.15   P2p
    Gi1/0/16            Desg FWD 19        128.16   P2p
    Gi1/0/17            Desg FWD 4         128.17   P2p
    Gi1/0/18            Desg FWD 4         128.18   P2p
    Gi1/0/20            Desg FWD 4         128.20   P2p
    Gi1/0/21            Desg FWD 19        128.21   P2p
    Gi1/0/22            Desg FWD 4         128.22   P2p
    Gi1/0/24            Desg FWD 4         128.24   P2p
    Gi1/0/25            Desg FWD 4         128.25   P2p
    Gi1/0/27            Desg FWD 19        128.27   P2p
    Gi1/0/29            Desg FWD 19        128.29   P2p
    Gi1/0/32            Desg FWD 19        128.32   P2p
    Gi1/0/37            Desg FWD 4         128.37   P2p
    Gi1/0/38            Desg FWD 19        128.38   P2p
    Gi1/0/39            Desg FWD 19        128.39   P2p
    Gi1/0/40            Desg FWD 19        128.40   P2p
    Gi1/0/41            Desg FWD 19        128.41   P2p
    Gi1/0/42            Desg FWD 4         128.42   P2p
    Gi1/0/43            Desg FWD 19        128.43   P2p
    Gi1/0/44            Desg FWD 19        128.44   P2p
    Gi1/0/45            Desg FWD 19        128.45   P2p
    Gi1/0/47            Desg FWD 19        128.47   P2p
    Gi1/0/48            Root FWD 19        128.48   P2p
    CISCO-2960-48-GB-ASP#show run int Gi1/0/48
    Building configuration...
    Current configuration : 39 bytes
    interface GigabitEthernet1/0/48
    end
    CISCO-2960-48-GB-ASP#show int Gi1/0/48
    GigabitEthernet1/0/48 is up, line protocol is up (connected)
      Hardware is Gigabit Ethernet, address is f41f.c2dc.9bb0 (bia f41f.c2dc.9bb0)
      MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
         reliability 255/255, txload 2/255, rxload 10/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX
      input flow-control is off, output flow-control is unsupported
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 00:00:01, output 00:00:02, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 12712290
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 4305000 bits/sec, 801 packets/sec
      5 minute output rate 1149000 bits/sec, 706 packets/sec
         2196985674 packets input, 2514470162077 bytes, 0 no buffer
         Received 28075666 broadcasts (15513358 multicasts)
         0 runts, 0 giants, 0 throttles
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 watchdog, 15513358 multicast, 0 pause input
         0 input packets with dribble condition detected
         1534630723 packets output, 395369715690 bytes, 0 underruns
         0 output errors, 0 collisions, 1 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier, 0 PAUSE output
         0 output buffer failures, 0 output buffers swapped out
    CISCO-2960-48-GB-ASP#show int Gi1/0/48 switchport
    Name: Gi1/0/48
    Switchport: Enabled
    Administrative Mode: dynamic auto
    Operational Mode: trunk
    Administrative Trunking Encapsulation: dot1q
    Operational Trunking Encapsulation: dot1q
    Negotiation of Trunking: On
    Access Mode VLAN: 1 (default)
    Trunking Native Mode VLAN: 1 (default)
    Administrative Native VLAN tagging: enabled
    Voice VLAN: none
    Administrative private-vlan host-association: none
    Administrative private-vlan mapping: none
    Administrative private-vlan trunk native VLAN: none
    Administrative private-vlan trunk Native VLAN tagging: enabled
    Administrative private-vlan trunk encapsulation: dot1q
    Administrative private-vlan trunk normal VLANs: none
    Administrative private-vlan trunk associations: none
    Administrative private-vlan trunk mappings: none
    Operational private-vlan: none
    Trunking VLANs Enabled: ALL
    Pruning VLANs Enabled: 2-1001
    Capture Mode Disabled
    Capture VLANs Allowed: ALL
    Protected: false
    Unknown unicast blocked: disabled
    Unknown multicast blocked: disabled
    Appliance trust: none
    CISCO-2960-48-GB-ASP#show run int Gi1/0/47
    Building configuration...
    Current configuration : 63 bytes
    interface GigabitEthernet1/0/47
    speed 100
    duplex full
    end
    CISCO-2960-48-GB-ASP#show int Gi1/0/47
    GigabitEthernet1/0/47 is up, line protocol is up (connected)
      Hardware is Gigabit Ethernet, address is f41f.c2dc.9baf (bia f41f.c2dc.9baf)
      MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
         reliability 255/255, txload 1/255, rxload 2/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX
      input flow-control is off, output flow-control is unsupported
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 00:00:28, output 00:00:01, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 576929
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 922000 bits/sec, 233 packets/sec
      5 minute output rate 453000 bits/sec, 220 packets/sec
         57257892 packets input, 17029314836 bytes, 0 no buffer
         Received 81580 broadcasts (29497 multicasts)
         0 runts, 0 giants, 0 throttles
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 watchdog, 29497 multicast, 0 pause input
         0 input packets with dribble condition detected
         101568868 packets output, 77491607955 bytes, 0 underruns
         0 output errors, 0 collisions, 1 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier, 0 PAUSE output
         0 output buffer failures, 0 output buffers swapped out
    CISCO-2960-48-GB-ASP#show int Gi1/0/47 switchport
    Name: Gi1/0/47
    Switchport: Enabled
    Administrative Mode: dynamic auto
    Operational Mode: trunk
    Administrative Trunking Encapsulation: dot1q
    Operational Trunking Encapsulation: dot1q
    Negotiation of Trunking: On
    Access Mode VLAN: 1 (default)
    Trunking Native Mode VLAN: 1 (default)
    Administrative Native VLAN tagging: enabled
    Voice VLAN: none
    Administrative private-vlan host-association: none
    Administrative private-vlan mapping: none
    Administrative private-vlan trunk native VLAN: none
    Administrative private-vlan trunk Native VLAN tagging: enabled
    Administrative private-vlan trunk encapsulation: dot1q
    Administrative private-vlan trunk normal VLANs: none
    Administrative private-vlan trunk associations: none
    Administrative private-vlan trunk mappings: none
    Operational private-vlan: none
    Trunking VLANs Enabled: ALL
    Pruning VLANs Enabled: 2-1001
    Capture Mode Disabled
    Capture VLANs Allowed: ALL
    Protected: false
    Unknown unicast blocked: disabled
    Unknown multicast blocked: disabled
    Appliance trust: none
    ===========================================================================
    Finally the third switch (at separate site via provider dedicated fiber link from port 47 above)
    SWC2960#show spanning-tree vlan 1
    VLAN0001
      Spanning tree enabled protocol ieee
      Root ID    Priority    32769
                 Address     1833.9db5.cd80
                 This bridge is the root
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
      Bridge ID  Priority    32769  (priority 32768 sys-id-ext 1)
                 Address     1833.9db5.cd80
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
                 Aging Time  300 sec
    Interface           Role Sts Cost      Prio.Nbr Type
    Fa0/1               Desg FWD 19        128.1    P2p
    Fa0/2               Desg FWD 19        128.2    P2p
    Fa0/3               Desg FWD 19        128.3    P2p
    Fa0/4               Desg FWD 19        128.4    P2p
    Fa0/5               Desg FWD 19        128.5    P2p
    Fa0/6               Desg FWD 19        128.6    P2p
    Fa0/7               Desg FWD 19        128.7    P2p
    Fa0/8               Desg FWD 19        128.8    P2p
    Fa0/9               Desg FWD 19        128.9    P2p
    Fa0/12              Desg FWD 19        128.12   P2p
    Fa0/13              Desg FWD 19        128.13   P2p
    Fa0/14              Desg FWD 19        128.14   P2p
    Fa0/16              Desg FWD 19        128.16   P2p
    Fa0/17              Desg FWD 19        128.17   P2p
    Fa0/18              Desg FWD 19        128.18   P2p
    Gi0/2               Desg FWD 4         128.26   P2p
    SWC2960#sh run int Gi0/2
    Building configuration...
    Current configuration : 36 bytes
    interface GigabitEthernet0/2
    end
    SWC2960#sh int Gi0/2
    GigabitEthernet0/2 is up, line protocol is up (connected)
      Hardware is Gigabit Ethernet, address is 1833.9db5.cd9a (bia 1833.9db5.cd9a)
      MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive not set
      Full-duplex, 1000Mb/s, link type is auto, media type is 10/100/1000BaseTX
      input flow-control is off, output flow-control is unsupported
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 00:00:01, output 00:00:01, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/0 (size/max)
      5 minute input rate 450000 bits/sec, 205 packets/sec
      5 minute output rate 792000 bits/sec, 211 packets/sec
         76476638 packets input, 76487607492 bytes, 0 no buffer
         Received 528325 broadcasts (253243 multicasts)
         0 runts, 0 giants, 0 throttles
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 watchdog, 253243 multicast, 0 pause input
         0 input packets with dribble condition detected
         59807938 packets output, 18071502348 bytes, 0 underruns
         0 output errors, 0 collisions, 1 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier, 0 PAUSE output
         0 output buffer failures, 0 output buffers swapped out
    SWC2960#sh int Gi0/2 switchport
    Name: Gi0/2
    Switchport: Enabled
    Administrative Mode: dynamic auto
    Operational Mode: trunk
    Administrative Trunking Encapsulation: dot1q
    Operational Trunking Encapsulation: dot1q
    Negotiation of Trunking: On
    Access Mode VLAN: 1 (default)
    Trunking Native Mode VLAN: 1 (default)
    Administrative Native VLAN tagging: enabled
    Voice VLAN: none
    Administrative private-vlan host-association: none
    Administrative private-vlan mapping: none
    Administrative private-vlan trunk native VLAN: none
    Administrative private-vlan trunk Native VLAN tagging: enabled
    Administrative private-vlan trunk encapsulation: dot1q
    Administrative private-vlan trunk normal VLANs: none
    Administrative private-vlan trunk associations: none
    Administrative private-vlan trunk mappings: none
    Operational private-vlan: none
    Trunking VLANs Enabled: ALL
    Pruning VLANs Enabled: 2-1001
    Capture Mode Disabled
    Capture VLANs Allowed: ALL
    Protected: false
    Unknown unicast blocked: disabled
    Unknown multicast blocked: disabled
    Appliance trust: none
    There really isn't anything odd configured, but since CDP doesn't cross the fiber link I think it must be a q-q tunnel..
    Dave

  • Graphics/artifacting issues with new mid-2014 15" MacBookPro Retina

    I'm having graphics issues with my new 15" mid-2014 2.8 MacBookPro Retina.  It came with Yosemite.  I keep get glitchy
    artifacting when using Premiere Pro and After Effects (CC 2014), obviously, but then even just while using Finder when AE and PP are closed.
    I've read about it with earlier models, but nothing about the new ones.
    I turned off the Automatic Graphics Switching in Energy Saver and just updated my CUDA NVIDIA driver.  It's still a problem.  Any ideas on what to do next?
    Thanks in advance.

    Remove CUDA and see whether there's an improvement.
    To remove CUDA, triple-click anywhere in the first line below on this page to select it:
    /Library/Frameworks/CUDA.framework
    /Library/LaunchAgents/com.nvidia.CUDASoftwareUpdate.plist
    /Library/PreferencePanes/CUDA Preferences.prefPane
    /System/Library/Extensions/CUDA.kext
    /System/Library/StartupItems/CUDA
    /usr/local/cuda
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Continue with the remaining lines. Some of the items may be absent, in which case you'll get a message that the file couldn't be found. After moving all the above items to the Trash, restart the computer and empty the Trash. Don't try to empty the Trash until you have restarted.
    If you haven't already done so, back up all data before making any changes.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Business Contact Manager issue with New Users

    I have an issue with a client when setting up Business Contact Manager for Outlook 2013. The client recently got a new employee and the employee was setup on an existing workstation that has BCM installed. When I launched Outlook 2013, and configured Oultook for
    the new user, BCM started and needed to be configured. I went through the procedure for connecting to a 'Remote Database' on the server, typed in the server name as requested, and clicked Continue. BCM searched for the database but could not find it. The existing
    user account on the workstation works just fine with BCM, and sees the remote database.
    My next step was to remove BCM and re-install. This is the latest version/release of BCM for Outlook 2013. The existing user account was able to configure BCM with no issues, and found the remote database without an issue. The new user account had the same
    issue as before and would not find the remote database.
    I logged onto the same workstation as the administrator account we use to perform Admin tasks. I launched Outlook, configured Outlook 2013, and was able to successfully configure BCM and connect to the remote database with no issues.
    I then created another New User on the server called Testaccount (TAccount), and logged onto the same workstation again, as this new user, and went through the same Outlook 2013 configuration and BCM setup. BCM has the same issue with this new user, and
    cannot locate the remote database. From what I can determine, this looks to be something related to New Users that are created on the server and BCM not locating the remote database. Existing users do not have this issue when configuring BCM and connecting
    to the remote database.
    Has anyone had this issue or seen this issue and knows of a fix to correct this so my client can use BCM with the new user account, and any future new users they hire?
    Thank you in advance for any assistance on this matter.

    If you want to sync subfolders then you will need third party software. (Like Pocket Mirror)
    Post relates to: None

Maybe you are looking for