Issue With Notes for Approval

Hi SRM Gurus,
The problem we have with "Notes for Approval" at the bottom of SC is whenever some one adds a Note to this section it is not getting properly aligned for example see below for how finally all notes look like after Notes being added by Approvers
Notes for Approval
This is Notes Test3:
This is the Note from :AOGRAN On 27.02.2008:
FHANK On 02/26/2008:
CBRITT On 02/26/2008:
In the above CBRITT has added the first line "This is Notes Test3: " but the note is shown at the beginning and his ID and time stamp are at the bottom.
Is there any way, both can be combined together in one line side by side ??

Hi Swati,
Looks like the template was modified beforw I started working on it.I compared the template code in dvelopment with previous version and found some lines were missing , copied the missing lines and now it is working fine.
Thanks a lot for the help,
Anubhav

Similar Messages

  • Strange issue with Notes For Approval field

    Hi All,
    Scenario one:
    While creating the shopping cart , in step3 screen there appers s a label Notes For Approval
    but the inputfield next to it was disabled and the creator can not enter any remarks in it.
    Login as approver , click on Approval link, click the magnifying glass icon in approval table.In the detail view , in lower part of screen under Additional Specifications tab thers is Add Note button .On clicking this button nothing happens , i mean no new text field appears on the screen for enetering remarks by the approver while approving or rejecting the cart.
    Due to above mentioned issue i modified the template SAPLBBP_SC_UI_ITS                 140 of BBPSC01 as follows.
    `T D(class="data")`<text area styl e="font-family:arial;font-size:11px;" na me="TEXT_LINE:66[]" cols="66" ro ws="6" wr ap="physical"  titl e="`#APPR_INFO`">`rep eat with r in TEXT_LINE;write (r, "\r\n");end`</te xtarea>
    the code above was commented in the template , i uncommented it . After this modifications while creating the shopping cart in step3 screen , a new textfield appeared next to the disabled textfield .
    Also in approver login , on clicking the Add Note button a textfield started appearing next to the disabled inputfield.
    But in approver login this textfield alwasy contains a default text .Only this deault text is visible in the creator's check status of this shoping cart.
    Scenario Two
    Aftre modifying the template a new textfield appears next to the disabled inputfield while creating the shopping cart , if we enter some text in this textfield and order the shopping cart then in the approval login on click of Add Note button two text fields appear otherwise only textfield appears.
    How to enable the standard textbox without modifying the template.
    I know the things I am trying to desribe are very complex but hope some one could help me on this.
    Please guide me on this.
    Regards,
    Anubhav

    Hi Swati,
    Looks like the template was modified beforw I started working on it.I compared the template code in dvelopment with previous version and found some lines were missing , copied the missing lines and now it is working fine.
    Thanks a lot for the help,
    Anubhav

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • Issues with nested for loops - saving images from a camera

    Hi all,
    I've written a vi. to capture a specific number of images ('Image No') and save these images, outputted to a folder of my choice.  Each image is identified sequentially.  However, I wish to do a number of iterations ('Run') of this capture sequence, such that the filename of each image would be 'Filename (Run)_(Image No).png', e.g. run 5, image 10 would be 'Filename 5_10.png'.  I have tried a nested for loop for this but I receive an error 'Asynchronous I/O operation in progress' (I've attached a printscreen).
    Can anyone assist me in solving this problem? I preiously posted this in machine Vision but got no response (http://forums.ni.com/t5/Machine-Vision/Capturing-image-sequences-issues-with-nested-for-loops/m-p/19...).  Please find attached my vi.
    Kindest regards and thanks,
    Miika
    Solved!
    Go to Solution.
    Attachments:
    Labview problem.jpg ‏3841 KB
    Image sequence save to file.vi ‏48 KB

    Miika,
    the problem is not the filenam, but the name of the folder (AHHHHH!). You try to create the same folder in the outer for loop over and over again.... (it is the error message above the '======', not below )
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Issue with authorizations for BPS

    Hi Experts,
    There was an issue with authorizations for BPS. We have a large number of agents that need to enter plan data via a layout. In order to control the necessary authorizations, we would like to filter via something similar to a user exit using a function module in order to avoid having to define authorization objects for each of the agents who have access to the systems. Right now, we are not sure if there is user exit concept available as it is for BW variables. Any body experienced similar issue may share their experience.
    Regards,
    Ankit

    Hi,
    In BPS, you can use user specific variables or you can set up a Variable of type exit. You can also have a variable of type authorization which uses the security / authorization of the BW system.
    Hope it helps...
    Cheers,
    Tanish

  • Photoshop batch production - issues with 'save for web'

    Hi,
    I'm having an issue with 'save for web' on a batch. I've just spent the last 2 hours searching the web and this forum and although the issue gets touched upon, the threads either suddenly head off in another direction, end, or i just struggle to make sense of the answers given.
    I have 350 images that i want to resize to thumbnails and then save for web. 2 hours ago this seemed like a 5 minute job.
    I creat an action called 'batch_thumbnail' and press 'Record'.
    I then select 'File' > 'Open' and select an image to open using the dialog box.
    I then select 'Image' > 'Image Size' and resize the image to the thumbnail size (200 x 125) and press 'OK'.
    I then select 'File' > 'Save for Web and Devices', set my optimisation settings and press 'save'.
    Using the dialog box that pops up, i navigate to a pre-created directory called 'thumbs' and press 'save'.
    I then select 'File' > 'Close' and on the dialog box that pops up i select 'Don't Save'.
    I then stop the action from recording.
    So far so good.
    I then select 'File' > 'Automate' > 'Batch...' and the dialog box appears.
    I select my action in the 'Action' drop down menu.
    In 'Source' i set the drop down menu to 'Folder', select 'Choose' and select the target directory with my 350 images in.
    In 'Destination' i set the drop down menu to 'Folder', select 'Choose' and select the target directory (thumbs), where i wish to save the thumbs.
    In 'File Naming' i leave the first box as 'document name', set the second to '_thumb' and have the third as 'extension'.
    I then click 'OK'.
    And this is where the problem begins. Everything works fine till it trys to save the second image. I can see what's happening, as the directory path and image name that are used whilst setting up the SFW part of the action, are getting hardcoded into the action. So every resulting image is being saved as the same file, instead of being overriden by the settings in 'File Naming'.
    I've tried selecting 'Override action 'Save' command', but it doesn't make any difference. Is it actually possible to batch produce files using 'Save for Web and Devices'?
    Cheers,
    James

    I have written a couple of Save For Web batch processors, they may be of use to you?
    They can both resize and run an action if required.
    CS2-CS3 http://www.ps-scripts.com/bb/viewtopic.php?t=2374
    CS4 http://www.ps-scripts.com/bb/viewtopic.php?t=2276 (This handles metadata)

  • Query regarding Note for approval

    Hi
    From which table we can find 'Note for Approval' against a shoping cart in SRM

    Go to BBP_PD, give your shopping cart number and scroll down, you will find the Notes for approval under
    Attachments:
    LongTexts:
    Thanks.

  • Note for approver

    Hi
    Im validating a leave request using Badi PT_ARQ_REQ. In the implementing class CL_PT_ARQ_REQ_EXIT there is a method IF_EX_PT_ABS_REQ~SIMULATE_VIA_BLOP which has the imprt parameter im_attabs_tab.
    which field in im_attabs_tab can I read the note for approver data.
    Regards,

    Did you try a look up of the db table PTREQ_NOTICE?
    ~Suresh

  • Issue with not getting mail in sost for the PR Approvers

    Hi all,
    I have the following requirement
    Currently, requisitioner receives workflow email notification each time the PR has been released. If a PR has 3 approvers, the requisitioner receives 3 identical emails. The problem is that from the email alone, the requisitioner does not know if the PR has been fully released or not. After the first email, requisitioner may try to create the PO when in fact the PR is not fully approved yet.
    The case here is when the requisition is created, the mail is sent to first approver to release the requisition and when the first approver releases, mail is sent to next approver and so till all the approvers approve, finally after all the approvals it is sent to requisitioner.
    For this I have created an activity GET PR status where i am checking the condition based on release indicator.
    When the release indicator is '2' then the final notification is sent to the requisitioner.
    The process is working fine in dev system. When there are three approvers and all the approvers have same mail Id when i create the requisition and release manually in me55, I am able to see the mail in sost. This is actually done after running the batch program. But when the approvers have different mail Id's im able to see in swia but not in sost.
    Any help is appreciated.
    Thanks

    Hi rick,
    My bad, I have assessed the issue differently.
    Yes im sending a single mail to the requisitioner after all the approvals.
    But the issue here is after the requisition is created, the first mail is going to the first approver. When the approver releases, the mail that has to go to next approver is shown in swia.
    Now when i run the batch job, it has to appear in sost. But, it is not.
    The whole process actually working fine in DEV system but in QAS, it is not.
    Is is showing the following message when i manually release the order and tested
    Status
    StatusText
    Cannot process message; no node determined for [email protected]

  • Send Issues with Outlook for Mac (2011 / V15) and Exchange 2013 SP1

    Hi all,
    we have a strange issue with only with Outlook for Mac Users (version 2011 and the newest Outlook Version (V15) from Office 365) connected to our Exchange Server 2013 SP1. Some emails which we send out to the exactly same recipient are not sent through our
    Exchange Server. 
    We have sent 8 emails with subject "test1, test2, test3...". Only test 3-6 was arriving to the recipient. The other emails are in the "sent" folder but it was not sent out through the Exchange.
    What we can see with "Get-MessageTrackingLog" is, that the Recipients and MessageSubject are empty for these emails:
    Timestamp Sender Recipients MessageSubject
    25.02.2015 16:48:52 [email protected].. {}
    25.02.2015 17:04:43 [email protected].. {}
    25.02.2015 17:08:25 [email protected].. {[email protected]} test 3
    25.02.2015 17:08:56 [email protected].. {[email protected]} test 4
    25.02.2015 17:09:38 [email protected].. {[email protected]} test 5
    25.02.2015 17:09:38 [email protected].. {[email protected]} test 6
    25.02.2015 17:13:45 [email protected].. {}
    25.02.2015 17:13:55 [email protected].. {}
    We can still reproduce the issue on different Mac computers.
    Thanks for any help in advance!
    Thanks and best regards
    Reto

    Here is the mailheader form the successfully sent email:
    Date: Wed, 25 Feb 2015 17:08:25 +0100
    Subject: test 3
    From: sender <[email protected]>
    To: "'[email protected]'" <[email protected]>
    This mailheader is from an email which was not sent out:
    User-Agent: Microsoft-MacOutlook/15.6.0.150113
    Date: Wed, 25 Feb 2015 16:48:52 +0100
    Subject: test 1
    From: sender <[email protected]>
    To: [email protected] <[email protected]>
    Interesting: Only the not received messages contains User-Agent string and have some quotation marks missing in the To field.

  • Colour issue with 'Save for Web' - Photoshop Elements 6 (Mac)

    Cross posted here, but no answer so far. Sorry for cross posting. For me, this is urgent, but I know it's not for anyone else, so apologies for putting 'urgent'.
    http://www.mac-forums.com/forums/images-graphic-design-digital-photography/150670-colour-i ssue-save-web-photoshop-elements-6-a.html#post840419
    This is a similar issue to this:
    Save for web color issue
    Except the user who posted the above was using photoshop cs3, and I'm using Adobe Photoshop Elements 6.
    When I work on a photo, I get it just right, then go to Save for Web, and the original it previews is loads lighter than the orginal I was working on in the first place. See 'Picture 1' attachment.
    I have changed the colour settings on the Save for Web options - I've chosen each one in turn, and none fix the problem.
    There seems to be no similar option in PSE6 to this that fixed it in CS3:
    IN the save for web box there is a small round button with an arrow in it (near the Done button).
    In the list when this button is pressed deselect Convert to sRGB
    I used to use PSE2 on a PC, and never had this problem. I didn't need to mess about with colour profiles or anything similar on the PC. The original was the original, not a washed out version of the original. Why spend ages getting the file just right, only for Save for Web to screw it up?
    Any advice to fix this would be much appreciated.
    Thanks

    Thanks very much for your reply.
    I've uploaded the images here:
    http://jimpix.co.uk/images/Picture 1.jpg
    http://jimpix.co.uk/images/Picture 2.png
    I deleted the prefs. file you suggested, and then opened PSE6.
    I then tried the profile setting you suggested - but it's not an option:
    http://jimpix.co.uk/images/Picture 3.png
    I tried 'remove profile' just in case that worked, but the same effect happens on Save for Web.
    Not sure what to try next!
    Thanks

  • Peformance issue with iSetup for loading fnd_flex_value_norm_hierarchy recs

    Hi
    The customer site where I am working in currently has implemented isetup to load data from Hyperion DRM to Oracle GL. They are currently on 11i.AZ.F patch level.
    The customer has constantly had problems in two areas with iSetup -
    1. iSetup has a limitation that all existing children records plus new ones being added have to sent in the XML file provided as input to iSetup. For eg. one parent ENTXXX might have 15000 children records i.e records in FND_FLEX_VALUE_NORM_HIERARCHY. Now when 2 children are removed from this parent in Hyperion DRM and these two records sent to Oracle iSetup for getting deleted from the parent, the current implementation stipulates that iSetup requires in the XML input file the remaining 14998 records. Thats how it knows to remove the two nodes. This is a huge performance issue.
    They are looking at loading into iSetup only the two deleted nodes with an action code of DELETE and let iSetup handle this rather than having to provide the entire list of children less the removed nodes for iSetup.
    2. Can we load using the final xml file directly by calling any Java class/process directly rather than going through iSetup Loader Concurrent Request?
    3. Is there any documentation on how to use the isetup Java classes?
    Will upgrading to 11i.AZ.H patch level solve any of the above concerns/issues?
    Regards,
    Richard

    #1. I guess, you are referring to the problems that you are encountering while loading GL COA. You may log SR against GL to know more details on how API loads data to instance. DELETE is a specific requirement in your case and I would suggest you to work with GL team and they may provide some solution or workaround to overcome this performance issue.
    #2. No, concurrent program does good amount of pre-processing that you would not get if you directly call the java classes.
    #3. Not sure, what you are exactly looking at. Are you looking for user guide to write your own iSetup API classes?
    11i.AZ.H has got good amount of performances fixes overall and it is recommended release on top of 11.5.10.2CU. I would suggest you to upgrade to 11i.AZ.H.
    Specific to GL COA issue, I don't think 11i.AZ.H would really help you much. It is very much functional issue with respect to API and you have to work with GL team to get workaround/solution. This may involve customizing the API according to your requirement.
    Thanks
    Mugunthan.

  • Has anyone had issues with not hearing the text alerts on the iPhone 5?

    hello i have been having issues with my iphone 5 not hearing the text alert tones.it will go from time to time & only hear the vibrating sound, The wired part is all other alerts work fine , just text. 
    Has anyone having this same issue ? Also i noticed sometimes when i text, i'll see some crazy blury lines go across my screen like as i text it will move across any help?

    I have had that issue with no text alert sound and also with calls, no ring for the call but then I got a missed call or voicemail alert. Never had the blurry lines though. Right after I upgraded, the ring changed to a very short version of what I have selected and only rang once, other times not at all. This was a very big problem since I am working from my car most of the day and get a lot of calls and texts.  I did a reset with home button and button on the top as described in a post somewhere here on the forum and the problems stopped. So far so good. Give reset a try!

  • BB BOLD 9700 sync issues with Outlook for MAC

    Hi Support, 
    I hope that you can help me?  I have been having issues with my BB calendar not being able to sync with my Outlook for MAC calendar.  I am using BB OS 6.0, Blackberry Desktop software 2.2.0 and Mac OS X version 10.7.2.
    I have been able toget around the calendars not syncing but this morning I added iCal to iCloud, stupid move as it erased my entire calendar.
    i was wondering if someone could help me restore my Outlook calendar and have my BB and calendar sync properly.
    Please Help!!!

    Hello and welcome to the BlackBerry Support Community Forums.
    The BlackBerry Desktop Software needs a local calendar for sync. It does not support the iCloud.
    You will need to create a new local calendar in your iCal to continue synchronizing with the Desktop Software.
    As for restoring your Outlook calendar, you will need to talk to Apple for assistance.
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Did this resolve my Safari 5 issue with not loading pages as fast?

    I've been having this problem every since I got my laptop a month ago... I have a wireless router that's connected to a PC, and I use wireless on my laptop. My old laptop was a PC, and the internet connection was just fine on it. However, I'm having issues with my MacBook Pro. When I first turned on my laptop after taking it out of the box, Airport detected my wireless router and connected me to the internet. Obviously, I used Safari 5 as my browser and although it works... it doesn't load the pages as fast as it should. It even stops loading at times. Usually, I quit Safari and reopen Safari and it works and if it doesn't, I click on the reload button or just keep re-opening Safari until it does work... buttt I am tired of doing that now. So after a lot of attempts by trial and error, I think I found the solution and was wondering if anyone could confirm this with me. I went to my router's IP address and I looked at the settings. I looked at the router's DNS settings and I copied and pasted that router setting into the DNS settings on my laptop for the wireless network. Now, my internet seems to be working... but then again it has only been 5 minutes. So my question is... the router's DNS has to match the wireless network's DNS address?
    Sorry if this sounds like a stupid question... I'm not an expert when it comes to internet, LAN, proxies, and etc. settings. Thank you!

    Further investigation has revealed that the following error message is being generated within Safari during the first time the that the page is loading,
    "Refused to load from document base URL. URL found within request."
    The <base> directive in the HTML, in this instance, is referring to a different URL than the one that the page is running from. The page with the problem is running on a remote server and back referencing to the home server for the <base> reference. This fails when the page first loads but seems to be accepted if a page-reload is done. It also works on all other browsers that have been tested.
    Is this related to a security setting in the browser?

Maybe you are looking for