Issue with OBIEE 11g measure columns

Hi,
Recently one of our application got migrated from 10 to 11g. post migration we had patched 6.1 and 6.2.
measure column defined in RPD were working fine in 10g and 11g(after patching) as well. Suddenly all measure columns are behaving abnormal.
Even though the measures are defined at particular level, the values are getting summed up and displaying the same for each and every dimension entity.
Simply bifurcation is not happening according to the dimension in all the reports.
c1 c2 c3
a x 2
b y 2
c z 2
Any guess?
Warm Regards
Kishore Panuganti

Check the physical query for group by clause cols, and check for those columns levels.

Similar Messages

Issue with OBIEE 11g(11.1.3) Installation

I have installed OBIEE 11g last evening. I was able to connect to the dashboard and run a simple report also – all before shut down. Now when I try to access OBIEE 11g thru port :9704 after starting the BI services, I am getting the following error.
“Error 404–Not Found
From RFC 2068 Hypertext Transfer Protocol — HTTP/1.1:
10.4.5 404 Not Found
My Weblogic server is working fine but im not able to access EM or ANALYTICS.
When I click Programs > OBI > Start BI Services it opens 3 wndows and says weblogic server is started and Im able to login to Weblogic server via “http://localhost:7001/console”.
When i start my machine the following services are started automatically:
1) Oracle WebLogic node Manager
2) OracleDBConsole
3) Oracle Service
4) OracleOraDB11g_home2_TNSListener
The following services are not started:
1) OracleDB11g_home2_ClrAgent
2) OracleJobScheduler
3) Oracle Process Manager(instance1)
4) Oracle VSS Writer Service
can you pls let me know how to start the Weblogic Admin Server?
I have even tried to reinstall and when the installation completes im able to login to “EM”, “weblogic” and “Analytics” also, but once i restart my machine im not able to login to “Analytics” as well as to “EM”.
The process im following is:
When i start the BI Services from Start->Programs->Oracle Business Intelligence->Start BI Services, i get a popup window where it asks for weglogic user and password, then i have entered the user as “weblogic” and has give the password entered at the time of installation, then 2 popups opens and it runs several java files, then im able to login to weblogic but no luck with “em” or “analytics”.
If i try to login to weblogic and try to start the “bi.em”, “biadminservices” i get java error message.
Even i dont get Oracle Logo on the Admin tool also.
Can you pls let me know the repository password also as i have tried with “Admin123? but no luck.
Every time when i do the installation im able to access all the services for the first time but once i restart the machine then only weblogic will be working.
I have installed OBIEE 11.1.3 on Windows 7 Ultimate N(32 bit) OS with Oracle11g Database
Pls let me know if im missing anything here?
Appreciate your help

This is a really basic question... but how much memory do you have, and how long have you waited for all the processes to load? On a Windows XP Virtual Machine with 3GB, I have waited 20 minutes before being able to access. And until then, you will see the error you have received.
Just a thought...

Issue with OBIEE 11g Deinstall

Hi All,
While trying to uninstall OBIEE 11g 6.8 (Simple Install), I guess I did a wrong step, by mistake I unistalled Weblogic Server before deinstalling the Oracle Instance and now while trying to deinstall the instance using "Deinstall Managed ASInstance", it gives me an error "INS- Unable to connect to Oracle WebLogic Administration Server" which makes sense because there is no admin server running now without weblogic.
What should I do now ?
1. Should I proceed with deleting the binaries and then manually delete the instance folder later on - If I do this, will I get an error while doing a fresh installation again?
2. Is there a way to install weblogic server again and then I can start again by deleting the Oracle Instance again
I realize that I should have uninstalled Weblogic Server at the end but now I am stuck, can anybody please help me on this?
Thanks,
Ronny

Ronny , No where you can't install weblogic to start with uninstall again !
just go with the option #1 if it is linux just rm directory should work otherwise delete the binaries, folders manually & environment variables
thanks,
Saichand

IE9 issue with obiee 11g

Hi All,
I have done some customizations using narrative view of obiee11G which displays an image on canvas using HTML5. I can view report with the custom image using all the browsers except Internet explorer. After some research i found that i need to change the Browser mode to IE9 from IE9 compatability view in F12 developer tool.
Is there a way to default this browser mode to IE9 instead of changing it manually every time we login to BI.
Thanks in advance,
vnk

Did you try clicking on Tools>Compatability Settings on the browser and seeing if the site is in the window? If so, remove it so it no longer uses Compatability View.
Check this link out, too:
http://stackoverflow.com/questions/3726357/why-does-ie9-switch-to-compatibility-mode-on-my-website

Issue with OEM 11g

Hi All,
I am facing issue with OEM 11g. It was went down automatically, however i am not able to find the specific reasons. As of now it has been started.
But in want to know the reasons why it was went down. Please guide me how to troubleshoot.
Thanks

Hi,
emctl.log
29281 :: Tue Oct 25 08:34:37 2011::AgentStatus.pm:emdctl status returned 3
19917 :: Thu Dec 15 19:40:11 2011::AgentStatus.pm:Processing status agent
19917 :: Thu Dec 15 19:40:12 2011::AgentStatus.pm:emdctl status returned 3
"emagent.log"
2011-12-14 20:37:07,994 Thread-894492032 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2011-12-14 20:37:08,008 Thread-894492032 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2011-12-14 20:37:12,582 Thread-894492032 EMAgent started successfully (00702)
2011-12-15 15:32:21,924 Thread-1112975680 <HTTP Listener> Agent Signaled to EXIT by emctl (00800)
2011-12-15 15:32:22,960 Thread-894492032 EMAgent normal shutdown (00703)
2011-12-15 15:32:36,318 Thread-654290304 Starting Agent 10.2.0.4.0 from /app/oracle/PROD/db/tech_st/11.1.0 (00701)
2011-12-15 15:32:37,001 Thread-654290304 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2011-12-15 15:32:37,165 Thread-654290304 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2011-12-15 15:32:37,228 Thread-654290304 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2011-12-15 15:32:39,828 Thread-654290304 EMAgent started successfully (00702)
2011-12-15 15:32:21,924 Thread-1112975680 WARN http: -1,5: nmehl_httpListener: signaled to exit from emctl
2011-12-15 15:32:22,960 Thread-1112975680 WARN : Signalled to Exit Normally. Signaled to exit from emctl
2011-12-15 15:32:36,322 Thread-654290304 WARN http: snmehl_connect: connect failed to (odbivprod.ivcf.org:1158): Connection refused (error = 111)
2011-12-15 15:32:36,322 Thread-654290304 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://odbivprod.ivcf.org:1158/em/upload/: retStatus=-32
2011-12-15 15:32:36,356 Thread-654290304 WARN command: Job Subsystem Timeout set at 600 seconds
2011-12-15 15:32:36,399 Thread-654290304 WARN upload: Upload manager has no Failure script: disabled
2011-12-15 15:32:36,672 Thread-654290304 WARN metadata: Name FileSystems has already been used
2011-12-15 15:32:36,672 Thread-654290304 WARN metadata: Name FileSystems has already been used
2011-12-15 15:32:36,954 Thread-654290304 WARN metadata: Metric waiting_sessions does not have any data columns
2011-12-15 15:32:36,954 Thread-654290304 WARN metadata: Metric session_wait_chains does not have any data columns
2011-12-15 15:32:36,954 Thread-654290304 WARN metadata: Metric hung_system_traces does not have any data columns
2011-12-15 15:32:37,019 Thread-654290304 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2011-12-15 15:32:37,285 Thread-1116055872 ERROR : (nmecmgr.c,3210):Memory 0x0 encountered, expect struct_id=11011
2011-12-15 15:32:37,286 Thread-1122355520 ERROR : (nmecmgr.c,3210):Memory 0x0 encountered, expect struct_id=11011
2011-12-15 15:32:37,286 Thread-1125505344 ERROR : (nmecmgr.c,3210):Memory 0x0 encountered, expect struct_id=11011
2011-12-15 15:32:37,338 Thread-1119205696 ERROR : (nmecmgr.c,3210):Memory 0x0 encountered, expect struct_id=11011
2011-12-15 15:32:37,451 Thread-1119205696 WARN TargetManager: Query returned 0 rows (only one expected) for the dynamic property from_cluster
2011-12-15 15:32:37,451 Thread-1119205696 ERROR : (nmecmgr.c,3210):Memory 0x0 encountered, expect struct_id=11011
2011-12-15 15:32:37,480 Thread-1119205696 ERROR : (nmecmgr.c,3210):Memory 0x0 encountered, expect struct_id=11011
2011-12-15 15:32:37,481 Thread-1119205696 ERROR : (nmecmgr.c,3210):Memory 0x0 encountered, expect struct_id=11011
2011-12-15 15:32:37,544 Thread-1125505344 ERROR : (nmecmgr.c,3210):Memory 0x0 encountered, expect struct_id=11011
2011-12-15 15:32:37,550 Thread-1125505344 ERROR : (nmecmgr.c,3210):Memory 0x0 encountered, expect struct_id=11011
2011-12-15 15:32:37,555 Thread-1125505344 ERROR : (nmecmgr.c,3210):Memory 0x0 encountered, expect struct_id=11011
Edited by: Vinod Ranjan on 15 Dec, 2011 9:40 PM

Integrating SQL Server 2005 with OBIEE 11g

Dear Gurus,
Is there any documentation about how to using SQL Server 2005 as datasource combined with OBIEE 11g?
Clear steps with pictures will be very helpful.
Thank so much
Regards
JOE

Hi,
Please refer this link.
http://rnm1978.wordpress.com/2009/08/21/querying-sql-server-from-obiee-running-on-unix/
Re: How to connect Linux OBIEE repository to SQL Server 2005 database
Hope this help's
THanks
Satya

PO outbound IDOC - Issue with Unit of measure

Hi,
I am facing issue with unit of measure.
1) In the PO outbound idoc in segment E1EDP01, the unit is always converted into ISO code and sent. Is there any way to avoid it.
2) Now while changing unit to ISO code, it checks if it is preset in T006 table. Now in some of the cases like Unit FT3, there are no entries in T006 table, hence IDOC is going into error. Let me know how can this be resolved. Do I need to update T006 table if yes then how can I do it.
Thanks.
Regards,
Shahu

Sorry.. Posting it in ABAP Development forum.

PO outbound interface - Issue with Unit of measure

Hi,
I am facing issue with unit of measure.
1) In the PO outbound idoc in segment E1EDP01, the unit is always converted into ISO code and sent. Is there any way to avoid it.
2) Now while changing unit to ISO code, it checks if it is preset in T006 table. Now in some of the cases like Unit FT3, there are no entries in T006 table, hence IDOC is going into error. Let me know how can this be resolved. Do I need to update T006 table if yes then how can I do it.
Thanks.
Regards,
Shahu
Edited by: shahuraj shirure on Mar 5, 2008 1:06 AM

Its always that while sending Units from SAP, it needs to be sent in ISO code and SAP always receives units of measure in the ISO unit format only.

Oracle Life science Data Hub integrated with OBIEE 11g

Hi all,
I have couple of questions from my end,
1. How Oracle Life Science Data Hub can be Integrated with OBIEE 11g.
2. Whether Oracle LSH is a separate software ? if it so kindly provide the link to download the LSH.
Many thanks in advance.
Regards,
Murali

Hi Murali,
I do not know whether obiee can use Oracle LSH as a source or not but please refer below link. It says that
1) Users can then launch the Oracle Business Intelligence Dashboard
either through Oracle LSH or through a URL to see data visualizations.
2)
Oracle LSH Release 2.2 supports using OBIEE 10.1.3.4.1 for both programs and
visualizations and OBIEE 11.1.1.5.0 for visualizations only.
Please check with you administrator.
Thanks,
Amol
(Please mark this answer, if you find correct)

Integration of Oracle BI Publisher with OBIEE 11G

Hi, all.
I want to know How to Integration of Oracle BI Publisher with OBIEE 11G?
Because I can't create data set using Oracle BI Analysis now, and the analyses and dashboards in BIEE presentation catalog is unvisible. Why?
Thank you.

I may be missing something, but BI Publisher Enterprise is installed at the same time as when you install BIEE on the server. You wouldn't install BI Publisher Desktop on that server. You can use BI Publisher Desktop locally to create templates for use in BI Publisher Enterprise.
I'm much more familiar with XML (BI) Publisher as part of Oracle Apps moreso than BIEE, so I could be wrong in my assessment.
Hope that helps,
Brett

Pre-Configured Virtual Machine with OBIEE 11g available?

Hi,
does Oracle offer a pre-configured Virtual Machine with OBIEE 11g? I found an old Virtual Box Image with 10.2..., but nothin newer.
Thanks for your help.
Christoph

Hi,
I don't suppose this is available yet is it? I notice Oracle offer quite a few downloadable images for Virtual Box now, but OBI isn't included in any that I could see.
Thanks,
Mike

Issue with Level-based measure at Year level

Hello everyone,
I am facing weird issue while using OBIEE 11g level-based measure at the Year level. I am creating a trend analysis report that are displaying Expense Accounts dimension with 6 levels and 2 measures: Expense YTD, and Expense Full Year measures
The report has multiple rows with value "Others" in the 3rd level of the account dimension (Account Level 3) yet, they all have different IDs and associated with different parents (different Account Level 2 values)...
When i displaying the Expense YTD measure only results are fine and everything is perfect, when selecting Expense Full Year measure, only the first occurrence of the value "Others" in 3rd level column is displayed and non of the remaining records appears...
What makes my life worse is that i can't even see the log file of this query because an error occurs when trying to view the session log i.e. "No log file found"
Please help, i am about to start the UAT phase of the current project and i am running out of time..
Thanks
Mohamed Adel

Hi,
Are you using presentation hierarchy?
Refer below if same is followed-
http://gerardnico.com/wiki/dat/obiee/hierarchy_level_based
Hope this helped/ answered.
Regards
MuRam

Issue in OBIEE 11g Presentation service.

Hi All,
I found a problem in OBIEE 11g Presentation service, i.e., When i created an analysis with few columns in the criteria, it showed proper result, but when i deleted one column and then again add the same column in the criteria, result did not show the added column.
Anyone else find this issue?
Please share your views..
Regards.

On the left hand corner you will see list of views in the report, on a basic analysis you will see title and table view. Select the table view and click on edit ( pencil symbol ). A new page opens up, scroll down a little and you will see the columns included and columns excluded sections. Make sure the column that you are trying to add to the report is not present in the excluded list. If it is, drag and drop it above.
Answer points if question is answered.
Thanks,
-Amith.

OBIEE-11g Double columns question

Hi guys, on my pc i've installed business intelligence suite 11.1.3 and now I need support about double columns feature. In the business model I've this hierarchy
Region -> Province -> Municipality
where the keys for each level are represented by the name of the element, the problem is that this keys are used to map geometric shapes to enable the map views features and the Municipality values are ambiguous in their domain (could exist two municipality with the same name but different province) in the official documentation is wrote that to unique identify a shape should be used a double columns field but when I 'apply the double field feature to the hierarchy levels the drill feature doesn't work properly and I get a strange filter error (seems that the system filter the value by id on the wrong field). Somebody could help me to understand if I can define a hierarchy where the keys have a descriptor id associated ?
Thanks a lot Regards

I 've also come up with the same issue. I am using OBIEE 11G (11.1.1.5.0) and Oracle Mapviewer Ver11_1_1_4_B110225.
On the RPD, My hierarchy is defined as: District -> Quarter -> Neighbourhood.
For each hierarchy level I am using:
District Logical Level keys:
District Id: Primary Key
District Name: Use for Display
Quarter Logical Level Keys:
Quarter Id: Primary Key
Quarter Name: Use for Display
Neighbourhood Logical Level Keys:
Neighbourhood Id: Primary Key
Neighbourhood Name: Use for Display
I need to associate each Mapviewer theme's ID (District ID, Quarter ID, Neighbourhood ID) with a relevant BI column, because the theme names are not distinct.
I have set the double column (Descriptor Id) feature: (District ID, Quarter ID, Neighbourhood ID) on each BI name column (BI Distict Name, BI Quarter Name, BI
Neighbourhood Name) of the business model and associated the layer key (ID) of each Mapviewer theme with the corresponding BI name column.
On the map view, drilling down from District to Quarter works properly, but I get the following action error while drilling down from quarter to neighbourhood:
An error occurred while trying to generate drill down query.
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError:
46036] Internal Assertion: Condition rowValues.size() == numColumns, file server\Query\Src\SQNavigatorAccess.cpp, line 495. (HY000)
SQL Issued: {CALL NQSGenerateDrillDownQuery('SELECT District Name saw_0, Quarter Name saw_1, DESCRIPTOR_IDOF(District Name) saw_2, DESCRIPTOR_IDOF(Quarter Name)
saw_3 FROM "Subject Area" WHERE DESCRIPTOR_IDOF(District) = 5','1','''5'',''31'',31','-1 -1 -1 -1 -1','0,2,3')}
However, if I add a table view on my analysis and click on the table view's quarter link, drilling down works ok both for the table and for the map view.
Moreover, I tried removing the double column (descriptor Id) feature from the business model while maintaining the hierarchy as described above.
I then associated the layer key (ID) of each Mapviewer theme with the corresponding BI ID column instead of the BI name column.
On the map view while drilling down from District to Quarter, a filter to a specific District is applied, but the associated Quarters theme is not displayed.
Finally, if I enable the "Use for Display" checkbox for each hierarchy level's primary key on the RPD, and maintain the association between the layer key (ID) of
each Mapviewer theme with the corresponding BI ID column, drilling down works correctly but only on the ID.
I need drilling down to work while clicking on the each name BI column of the hierarchy while defining the association on the layer key ID of each mapviewer
theme. Is this possible? Any ideas?

Weird behaviour of OBIEE 11g hierarchy columns

Hi,
I'm facing this weird issue when i implement the OBIEE 11g new feature called hierarchy column.The issue is that the last value in the hierarchy is reporting
Example
Store Heir-achy
->Store Country
->Store City
->Store name
->Store Name
->Store name (And the level goes on and on).
I don't know why this weird thing is happening.Any help is appreciated.
Thanks,
Sunny.

Thanks for the response, in regards to whether it is 1 or 2 Logical Facts, it is still the same behaviour. IN regards to the Logical Dimension, yes it is set with two LTS with the applicable content levels set. I even tried that as just 1 LTS doing the join through the General tab. Still the same behaviour with the drill-down. I am assuming it will always go through the full drill path regardless of what level the Fact you are hitting is at.

Issue with OBIEE 11g measure columns

Similar Messages

Maybe you are looking for