Issue with opening and closing 13 inch MBP
I recently received a 13 inch 8gb memory Macbook pro for educational purposes. Although I believe it is overall a great product, I have noticed an issue pertaining to opening and closing the device. Occasionally when I attempt to open the device, I notice that the black mechanism which attaches the display and keyboard together fails, or locks up in an unusual manner which prevents me from opening the device fully. This causes me to have to close the device, and open it once more. Although it doesn't appear to be a huge issue, I was wondering if this should be something of concern, or something that is common and is nothing to be worried about.
Although this isn't something that I've personally seen before, I probably wouldn't be too concerned if it doesn't look like anything is actually broken - assuming that it didn't cause issues with using the device, that is.
What might be a good idea, though, is if you have a few minutes and have an ARS nearby, is to make a Genius Bar appointment and let Apple take a quick look at it. It looks like some piece of mind is all you want, and given the scenario, having someone physically able to see/feel the issue is probably your best bet. The appointments are 15 minutes, and free of charge. You can make an appointment here.
Regards,
Gnomish8
Similar Messages
-
Material wise reciept and Issue report with Opening and Closing Stock
Hi
I need a report,Material wise Receipt and issue with Opening and Closing stock.Is there any standard report available in SAP ?
Or we have to go for Customised Report.
Please replyHi,
MB5B gives total receipts - if i click on the receipts i can view the multiple material documents - BUT is there any way to drill down the reciepts or view the breakup of the receipts on the same screen OR is there any other report for this.
Regards,
Laxmi -
Customer/Vendor A/C with line item details and with opening and closing Bal
Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balancesHello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah -
Customer Statement with opening and closing balances
Dear Forum,
The users want to generate the Customer Statement with opening and closing balances like the traditional one. The statement now generated gives the list of all open items as on date, but the users want the statement with opening balances as on the date of the begining of the range specified and the closing balance at the end of the period for which the statement is generated. Is there a way to generate the same from the system.
Thanks for the help.
Regards,Hi,
SPRO> Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Line Items > Correspondence > Make and Check Settings for Correspondence
You can use the program RFKORD10 with correspondance type SAP06 for your company code
This program prints account statements and open items lists for customers and vendors in letter form. For account statements, all postings between two key dates, as well as the opening and closing balance, are listed.
Regards,
Gaurav -
Vendor Line item with Opening and Closing Balances report regarding
Dear All,
I need a report for vendor line items with Opening and Closing balances.
Thanks in advance
SateeshHi
Try S_ALR_87012082 - Vendor Balances in Local Currency
Regards
Sanil Bhandari -
COPA reporting with open and closed projects
Dear All,
I am designing a COPA solution for an infrastructure providing company using project systems and posting to/settling out of projects on a monthly basis. Projects run for long periods and continually incurr costs and earn revenue untill they are closed. The requirement is to report by common characteristics (say customer group) and separately for open and closed projects. My issue is how to separate the line items of projects where status changed to closed (having posted with the status REL previously), from the open ones, without entering the projects individually in the selections screen.
Any ideas will be greatly appreciated.
Thanks,
MaddyDear Satya,
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee0bbd55c811d189900000e8322d00/content.htm
An item of a purchase requisition is only regarded as Closed if the requested order quantity has been included in a purchase order.
You can also set an item to Closed manually. <b>This item will then not be taken into account by the materials planning and control system.</b>
You can set the Closed indicator manually at the following points (it can later be cancelled if necessary):
When changing a purchase requisition, on the item detail screen
When creating a purchase order referencing a requisition, on the item detail screen of the PO
You can still create purchase orders by referencing a requisition if this indicator has been set in the requisition concerned.
The indicator can also be set in the case of automatic PO generation from purchase requisitions. On the initial screen of the requisition, you can specify that the requisition is to count as closed as soon as an associated purchase order has been generated, even if the complete quantity requested has not been ordered, for example (Set reqs. to "closed" indicator).
Analyses of Purchase Requisitions:
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm (visit section under Reporting in Purchasing)
Hope this will help.
Regards,
Naveen. -
Performance Issue For Opening And Closing Balance In FBL1N/3N/5N
Dear experts,
I Am Having Requirement to Bring Opening And Closing Balance In FBL1N, FBL3N, FBL5N.
For This requirement I Used BADI : FI_ITEMS_CH_DATA~CHANGE_ITEMS, below is my Code For FBL1N, And I've Done the same For 3N/5N...With Related BAPI
* IF SY-TCODE = 'FBL1N'.
* LOOP AT ct_items INTO gs_items.
* CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
* EXPORTING
* date = gs_items-budat
* days = '01'
* months = '00'
* signum = '-'
* years = '00'
* IMPORTING
* calc_date = lv_date.
* CALL FUNCTION 'BAPI_AP_ACC_GETKEYDATEBALANCE'
* EXPORTING
* companycode = gs_items-bukrs
* vendor = gs_items-konto
* keydate = lv_date
** BALANCESPGLI = ' '
** NOTEDITEMS = ' '
** IMPORTING
** RETURN =
* TABLES
* keybalance = lv_obal.
* CALL FUNCTION 'BAPI_AP_ACC_GETKEYDATEBALANCE'
* EXPORTING
* companycode = gs_items-bukrs
* vendor = gs_items-konto
* keydate = gs_items-budat
** BALANCESPGLI = ' '
** NOTEDITEMS = ' '
** IMPORTING
** RETURN =
* TABLES
* keybalance = lv_cbal
* READ TABLE lv_cbal INTO gs_cbal INDEX 1.
* gs_items-cbal = gs_cbal-lc_bal.
* READ TABLE lv_obal INTO gs_obal INDEX 1.
* gs_items-obal = gs_obal-lc_bal.
* MODIFY ct_items FROM gs_items TRANSPORTING obal cbal.
* CLEAR: gs_items,gs_obal,gs_cbal.
* ENDLOOP.
* ENDIF.
So, Above Code Causing Me the Performance Issue, Kindly Suggest Me the Solution..
Regards,
uday.Hi Uday,
I am sending you the code i used for the creation a Zreport based on FBL5N. Please check if it can of any help.
*& Report ZFBL5N *
REPORT zfbl5n_new .
TABLES : bsid,knc1,lfc1.
TYPE-POOLS: slis.
TYPES: BEGIN OF ty_bsid,
bukrs TYPE bsid-bukrs,
kunnr TYPE bsid-kunnr,
belnr TYPE bsid-belnr,
buzei TYPE bsid-buzei,
bldat TYPE bsid-bldat,
blart TYPE bsid-blart,
bschl TYPE bsid-bschl,
shkzg TYPE bsid-shkzg,
dmbtr TYPE bsid-dmbtr,
augdt TYPE bsid-augdt,
augbl TYPE bsid-augbl,
zuonr TYPE bsid-zuonr,
sgtxt TYPE bsid-sgtxt,
zfbdt TYPE bsid-zfbdt,
zterm TYPE bsid-zterm,
zbd1t TYPE bsid-zbd1t,
zbd2t TYPE bsid-zbd2t,
zbd3t TYPE bsid-zbd3t,
kkber TYPE bsid-kkber,
bstat TYPE bsid-bstat,
umskz TYPE bsid-umskz,
END OF ty_bsid.
TYPES: BEGIN OF ty_bsik,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
bldat TYPE bsik-bldat,
blart TYPE bsik-blart,
bschl TYPE bsik-bschl,
shkzg TYPE bsik-shkzg,
dmbtr TYPE bsik-dmbtr,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
sgtxt TYPE bsik-sgtxt,
zfbdt TYPE bsik-zfbdt,
* KKBER TYPE bsik-kkber,
zterm TYPE bsik-zterm,
zbd1t TYPE bsik-zbd1t,
zbd2t TYPE bsik-zbd2t,
zbd3t TYPE bsik-zbd3t,
bstat TYPE bsid-bstat,
umskz TYPE bsid-umskz,
END OF ty_bsik.
TYPES: BEGIN OF ty_final,
belnr TYPE bsid-belnr,
* buzei TYPE bsak-buzei,
bldat TYPE bsid-bldat,
blart TYPE bsid-blart,
chq TYPE bsid-zuonr,
debit TYPE bsid-dmbtr,
credit TYPE bsid-dmbtr,
txt TYPE bsid-sgtxt,
date TYPE bsid-zfbdt,
kkber TYPE bsid-kkber,
zterm TYPE bsid-zterm,
augbl TYPE bsid-augbl,
augdt TYPE bsid-augdt,
flag TYPE c,
END OF ty_final.
TYPES : BEGIN OF gs_openbal,
bukrs TYPE bapi3007_2-comp_code,
kunnr TYPE bapi3007_2-customer,
dmbtr TYPE bapi3007_2-lc_amount,
END OF gs_openbal.
DATA: it_bsid TYPE STANDARD TABLE OF ty_bsid,
it_bsik TYPE STANDARD TABLE OF ty_bsik,
it_final TYPE STANDARD TABLE OF ty_final.
DATA: wa_bsid TYPE ty_bsid,
wa_bsik TYPE ty_bsik,
wa_final TYPE ty_final.
DATA: w_days TYPE t5a4a-dlydy,
w_month TYPE t5a4a-dlymo,
w_year TYPE t5a4a-dlyyr,
w_date TYPE p0001-begda,
w_name1 TYPE kna1-name1,
w_ort01 TYPE kna1-ort01,
w_lifnr TYPE kna1-lifnr,
w_dmbtr1 TYPE bsid-dmbtr,
w_dmbtr2 TYPE bsid-dmbtr,
w_dmbtr3 TYPE bsad-dmbtr,
w_dmbtr4 TYPE bsad-dmbtr,
w_opbal TYPE bsid-dmbtr,
w_credit TYPE bsik-dmbtr,
w_debit TYPE bsik-dmbtr,
w_clobal TYPE bsik-dmbtr,
w_credit1 TYPE bsik-dmbtr,
w_debit1 TYPE bsik-dmbtr,
w_clobal1 TYPE bsik-dmbtr.
DATA: ld_yrper LIKE rwcoom-fiscper,
kunnr LIKE kna1-kunnr,
x_norm TYPE c,
x_park,
x_apar,
x_merk,
ok_code(4),
wa_x001 LIKE x001,
return LIKE bapireturn,
line_count LIKE sy-loopc,
number_of_records TYPE i,
xindex LIKE sy-tabix,
open LIKE knc1-um01s,
temp(20),
close LIKE knc1-um01s,
gjahr LIKE bsid-gjahr,
period LIKE bkpf-monat,
f(1),
v_char(2),
closec(20),
openc(20),
debit LIKE bapi3007_2-lc_amount,
credit LIKE debit.
DATA : v_dmbtr LIKE bsid-dmbtr.
*DATA : tot_debit LIKE t_ar-debit,
* tot_credit LIKE t_ar-credit.
DATA : t_kna1 LIKE kna1 OCCURS 1 WITH HEADER LINE,
t_knb1 LIKE knb1 OCCURS 10 WITH HEADER LINE.
DATA ibsid LIKE bsid OCCURS 0 WITH HEADER LINE.
DATA ibsad LIKE bsad OCCURS 0 WITH HEADER LINE.
DATA ibsik LIKE bsik OCCURS 0 WITH HEADER LINE.
DATA ibsak LIKE bsak OCCURS 0 WITH HEADER LINE.
DATA : it_fieldcat_alv TYPE slis_t_fieldcat_alv,
wa_fieldcat_alv TYPE slis_fieldcat_alv,
is_layout_alv TYPE slis_layout_alv,
wa_layout_alv TYPE slis_layout_alv,
it_list_top_of_page TYPE slis_t_listheader,
it_events TYPE slis_t_event,
wa_events TYPE LINE OF slis_t_event.
DATA : BEGIN OF ibukrs OCCURS 0,
bukrs LIKE t001-bukrs,
END OF ibukrs.
DATA : BEGIN OF ikunnr1 OCCURS 0,
kunnr LIKE knc1-kunnr,
END OF ikunnr1.
DATA : BEGIN OF ikunnr OCCURS 0,
kunnr LIKE knc1-kunnr,
bukrs LIKE t001-bukrs,
lifnr LIKE lfc1-lifnr,
END OF ikunnr.
DATA: it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv.
DATA: r_bschl TYPE RANGE OF bschl,
wa_bschl LIKE LINE OF r_bschl.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_kunnr TYPE bsid-kunnr OBLIGATORY,
p_bukrs TYPE bsid-bukrs OBLIGATORY.
SELECT-OPTIONS: so_budat FOR bsid-budat .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS : p_normal AS CHECKBOX,
p_spl AS CHECKBOX,
p_vendor AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK b2.
PERFORM get_data.
PERFORM process_data.
*PERFORM calculate_openbal. " Commented by anish
PERFORM calculate_open_bal.
PERFORM calculate_closing_bal.
PERFORM build_catalog_sort USING it_sort.
PERFORM reuse_alv_events_get .
PERFORM display_data.
*& Form GET_DATA
* text
* --> p1 text
* <-- p2 text
FORM get_data .
SELECT bukrs kunnr belnr buzei bldat blart bschl shkzg dmbtr augdt augbl zuonr sgtxt zfbdt zterm zbd1t zbd2t zbd3t kkber
bstat umskz FROM bsid
INTO TABLE it_bsid
WHERE bukrs = p_bukrs
AND kunnr = p_kunnr
AND budat IN so_budat.
SELECT bukrs kunnr belnr buzei bldat blart bschl shkzg dmbtr augdt augbl zuonr sgtxt zfbdt zterm zbd1t zbd2t zbd3t kkber
bstat umskz FROM bsad
APPENDING TABLE it_bsid
WHERE bukrs = p_bukrs
AND kunnr = p_kunnr
AND budat IN so_budat.
SELECT SINGLE name1 ort01 lifnr FROM kna1
INTO (w_name1 , w_ort01 , w_lifnr)
WHERE kunnr = p_kunnr.
IF p_vendor IS NOT INITIAL.
SELECT bukrs lifnr belnr buzei bldat blart bschl shkzg dmbtr augdt augbl zuonr sgtxt zfbdt zterm zbd1t zbd2t zbd3t
bstat umskz FROM bsik
APPENDING TABLE it_bsik
WHERE bukrs = p_bukrs
AND lifnr = w_lifnr
AND budat IN so_budat.
SELECT bukrs lifnr belnr buzei bldat blart bschl shkzg dmbtr augdt augbl zuonr sgtxt zfbdt zterm zbd1t zbd2t zbd3t
bstat umskz FROM bsak
APPENDING TABLE it_bsik
WHERE bukrs = p_bukrs
AND lifnr = w_lifnr
AND budat IN so_budat.
ENDIF.
SORT it_bsid BY bschl.
DELETE it_bsid WHERE bschl = '04'.
DELETE it_bsid WHERE bschl = '07'.
DELETE it_bsid WHERE bschl = '17'.
DELETE it_bsid WHERE bschl = '34'.
DELETE it_bsid WHERE bschl = '27'.
DELETE it_bsid WHERE bschl = '37'.
SORT it_bsik BY bschl.
DELETE it_bsik WHERE bschl = '04'.
DELETE it_bsik WHERE bschl = '07'.
DELETE it_bsik WHERE bschl = '17'.
DELETE it_bsik WHERE bschl = '34'.
DELETE it_bsik WHERE bschl = '27'.
DELETE it_bsik WHERE bschl = '37'.
ENDFORM. " GET_DATA
*& Form PROCESS_DATA
* text
* --> p1 text
* <-- p2 text
FORM process_data .
DATA:okay TYPE c VALUE space.
w_month = '00'.
w_year = '00'.
SORT it_bsid BY bldat .
LOOP AT it_bsid INTO wa_bsid.
PERFORM check_item_ok USING p_normal
p_spl
p_vendor
* x_park
wa_bsid
CHANGING okay.
CHECK okay = 'X'.
wa_final-belnr = wa_bsid-belnr.
wa_final-bldat = wa_bsid-bldat.
wa_final-blart = wa_bsid-blart.
wa_final-txt = wa_bsid-sgtxt.
wa_final-kkber = wa_bsid-kkber.
wa_final-zterm = wa_bsid-zterm.
wa_final-augbl = wa_bsid-augbl.
wa_final-augdt = wa_bsid-augdt.
wa_final-flag = 'C'.
IF wa_bsid-blart = 'DZ'.
wa_final-chq = wa_bsid-zuonr.
ENDIF.
IF wa_bsid-shkzg = 'S'.
wa_final-debit = wa_bsid-dmbtr.
ELSEIF wa_bsid-shkzg = 'H'.
wa_final-credit = wa_bsid-dmbtr.
ENDIF.
w_credit = w_credit + wa_final-credit.
w_debit = w_debit + wa_final-debit.
****** Net due date
IF wa_bsid-zbd1t IS NOT INITIAL.
w_days = wa_bsid-zbd1t.
ELSEIF wa_bsid-zbd2t IS NOT INITIAL.
w_days = wa_bsid-zbd2t.
ELSEIF wa_bsid-zbd3t IS NOT INITIAL.
w_days = wa_bsid-zbd3t.
ENDIF.
IF w_days IS INITIAL.
wa_final-date = wa_bsid-zfbdt.
ELSE.
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
EXPORTING
date = wa_bsid-zfbdt
days = w_days
months = w_month
signum = '+'
years = w_year
IMPORTING
calc_date = w_date.
wa_final-date = w_date.
ENDIF.
APPEND wa_final TO it_final.
CLEAR: w_days , w_date , wa_final .
ENDLOOP.
IF it_bsik IS NOT INITIAL.
CLEAR: w_days , w_date.
SORT it_bsik BY bldat.
LOOP AT it_bsik INTO wa_bsik.
wa_final-belnr = wa_bsik-belnr.
wa_final-bldat = wa_bsik-bldat.
wa_final-blart = wa_bsik-blart.
wa_final-txt = wa_bsik-sgtxt.
* wa_final-kkber = wa_bsik-kkber.
wa_final-zterm = wa_bsik-zterm.
wa_final-augbl = wa_bsik-augbl.
wa_final-augdt = wa_bsik-augdt.
wa_final-flag = 'V'.
IF wa_bsik-blart = 'DZ'.
wa_final-chq = wa_bsik-zuonr.
ENDIF.
IF wa_bsik-shkzg = 'S'.
wa_final-debit = wa_bsik-dmbtr.
ELSEIF wa_bsik-shkzg = 'H'.
wa_final-credit = wa_bsik-dmbtr.
ENDIF.
w_credit1 = w_credit1 + wa_final-credit.
w_debit1 = w_debit1 + wa_final-debit.
******* Net Due date
IF wa_bsik-zbd1t IS NOT INITIAL.
w_days = wa_bsik-zbd1t.
ELSEIF wa_bsik-zbd2t IS NOT INITIAL.
w_days = wa_bsik-zbd2t.
ELSEIF wa_bsik-zbd3t IS NOT INITIAL.
w_days = wa_bsik-zbd3t.
ENDIF.
IF w_days IS INITIAL.
wa_final-date = wa_bsik-zfbdt.
ELSE.
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
EXPORTING
date = wa_bsik-zfbdt
days = w_days
months = w_month
signum = '+'
years = w_year
IMPORTING
calc_date = w_date.
ENDIF.
wa_final-date = w_date.
APPEND wa_final TO it_final.
CLEAR: wa_final.
ENDLOOP.
ENDIF.
ENDFORM. " PROCESS_DATA
*& Form DISPLAY_DATA
* text
* --> p1 text
* <-- p2 text
FORM display_data .
wa_fieldcat_alv-fieldname = 'BELNR'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-003.
wa_fieldcat_alv-outputlen = '11'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'BLDAT'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-004.
wa_fieldcat_alv-outputlen = '13'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'BLART'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-005.
wa_fieldcat_alv-outputlen = '02'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'CHQ'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-006.
wa_fieldcat_alv-outputlen = '09'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'DEBIT'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-007.
wa_fieldcat_alv-outputlen = '15'.
wa_fieldcat_alv-do_sum = 'X'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'CREDIT'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-008.
wa_fieldcat_alv-outputlen = '15'.
wa_fieldcat_alv-do_sum = 'X'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'TXT'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-009.
wa_fieldcat_alv-outputlen = '50'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'DATE'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-010.
wa_fieldcat_alv-outputlen = '12'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'KKBER'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-011.
wa_fieldcat_alv-outputlen = '04'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'ZTERM'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-012.
wa_fieldcat_alv-outputlen = '13'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'AUGBL'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-013.
wa_fieldcat_alv-outputlen = '15'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'AUGDT'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-seltext_l = text-014.
wa_fieldcat_alv-outputlen = '17'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'FLAG'.
wa_fieldcat_alv-tabname = 'IT_FINAL'.
wa_fieldcat_alv-tech = 'X'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
is_layout = wa_layout_alv
it_fieldcat = it_fieldcat_alv
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
it_sort = it_sort
it_events = it_events
i_save = 'A'
TABLES
t_outtab = it_final
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
* EXPORTING
* i_callback_program = sy-repid
* i_callback_top_of_page = 'TOP_OF_PAGE'
* is_layout = wa_layout_alv
* it_fieldcat = it_fieldcat_alv
* it_sort = it_sort
*** I_DEFAULT = 'X'
** i_save = 'A'
*** IT_EVENTS =
* TABLES
* t_outtab = it_final
* EXCEPTIONS
* program_error = 1
* OTHERS = 2
* IF sy-subrc <> 0.
*** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM. " DISPLAY_DATA
*& Form TOP_OF_PAGE
* Header at top of page.
FORM top_of_page.
SKIP 1.
WRITE: AT 35 'Account Statement from' , so_budat-low , 'to' , so_budat-high.
SKIP 2.
WRITE: AT /5 'CUSTOMER:' , p_kunnr.
WRITE: AT 35 'Name:' , w_name1.
WRITE: AT /5 'Company:' , p_bukrs.
WRITE: AT 35 'City:' , w_ort01.
SKIP 1.
WRITE: AT /5 'Opening Balance as on' , so_budat-low , ' ' , w_opbal LEFT-JUSTIFIED.
SKIP 2.
ENDFORM. "TOP_OF_PAGE
*& Form END_OF_PAGE
* Footer at End of page.
FORM end_of_page.
SKIP 2.
IF so_budat-high IS NOT INITIAL.
WRITE: AT 5 'Closing Balance as on' , so_budat-high , ' ' , w_clobal LEFT-JUSTIFIED.
ELSE.
WRITE: AT 5 'Closing Balance ' , w_clobal LEFT-JUSTIFIED.
ENDIF.
ENDFORM. "end_of_page
*& Form CALCULATE_OPENBAL
* text
* --> p1 text
* <-- p2 text
FORM calculate_openbal .
DATA:v_gjahr TYPE bsid-gjahr.
DATA: v_period LIKE t009b-poper,v_monat LIKE t001-periv.
CALL FUNCTION 'FI_PERIOD_DETERMINE'
EXPORTING
i_budat = so_budat-low
i_bukrs = p_bukrs
* I_PERIV = ' '
* I_GJAHR = 0000
* I_MONAT = 00
* X_XMO16 = ' '
IMPORTING
e_gjahr = v_gjahr
* e_monat = v_monat
e_poper = v_period.
IF sy-subrc NE 0.
ENDIF.
DATA: f_date LIKE sy-datum.
CALL FUNCTION 'FIRST_DAY_IN_PERIOD_GET'
EXPORTING
i_gjahr = v_gjahr
i_monmit = 00
i_periv = 'V3'
i_poper = v_period
IMPORTING
e_date = f_date.
period = v_period - 1.
gjahr = v_gjahr.
DATA wa_kna1 LIKE kna1.
CALL FUNCTION 'READ_KNA1'
EXPORTING
xkunnr = p_kunnr
IMPORTING
xkna1 = wa_kna1
EXCEPTIONS
key_incomplete = 1
not_authorized = 2
not_found = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE w023(zwww).
CALL SCREEN 0010.
ENDIF.
MOVE-CORRESPONDING wa_kna1 TO t_kna1.
APPEND t_kna1.
SELECT kunnr FROM kna1 INTO TABLE ikunnr1
WHERE kunnr = p_kunnr.
SELECT bukrs FROM t001 INTO TABLE ibukrs
FOR ALL ENTRIES IN t_knb1
WHERE bukrs = t_knb1-bukrs.
LOOP AT ikunnr1.
LOOP AT ibukrs.
ikunnr-kunnr = ikunnr1-kunnr.
ikunnr-bukrs = ibukrs-bukrs.
READ TABLE t_kna1 WITH KEY kunnr = ikunnr1-kunnr.
ikunnr-lifnr = t_kna1-lifnr.
APPEND ikunnr.
ENDLOOP.
ENDLOOP.
DELETE ikunnr WHERE bukrs NE p_bukrs.
LOOP AT ikunnr.
CLEAR: knc1,lfc1,f.
IF NOT ( ikunnr-kunnr IS INITIAL ) AND NOT ( p_vendor IS INITIAL ).
SELECT SINGLE * FROM lfc1
WHERE gjahr = gjahr AND bukrs = ikunnr-bukrs
AND lifnr = ikunnr-lifnr.
ENDIF.
SELECT SINGLE * FROM knc1
WHERE gjahr = gjahr AND bukrs = p_bukrs
AND kunnr = p_kunnr.
IF sy-subrc = 0.
CASE period .
WHEN 12.
open = knc1-umsav +
knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
knc1-um07s - knc1-um07h + knc1-um08s - knc1-um08h +
knc1-um09s - knc1-um09h + knc1-um10s - knc1-um10h +
knc1-um11s - knc1-um11h + knc1-um12s - knc1-um12h.
IF NOT ( lfc1 IS INITIAL ).
open = open + lfc1-umsav +
lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
lfc1-um05s - lfc1-um05h + lfc1-um06s - lfc1-um06h +
lfc1-um07s - lfc1-um07h + lfc1-um08s - lfc1-um08h +
lfc1-um09s - lfc1-um09h + lfc1-um10s - lfc1-um10h +
lfc1-um11s - lfc1-um11h + lfc1-um12s - lfc1-um12h.
ENDIF.
WHEN 11.
open = knc1-umsav +
knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
knc1-um07s - knc1-um07h + knc1-um08s - knc1-um08h +
knc1-um09s - knc1-um09h + knc1-um10s - knc1-um10h +
knc1-um11s - knc1-um11h.
IF NOT ( lfc1 IS INITIAL ) .
open = open + lfc1-umsav +
lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
lfc1-um05s - lfc1-um05h + lfc1-um06s - lfc1-um06h +
lfc1-um07s - lfc1-um07h + lfc1-um08s - lfc1-um08h +
lfc1-um09s - lfc1-um09h + lfc1-um10s - lfc1-um10h +
lfc1-um11s - lfc1-um11h.
ENDIF.
WHEN 10.
open = knc1-umsav +
knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
knc1-um07s - knc1-um07h + knc1-um08s - knc1-um08h +
knc1-um09s - knc1-um09h + knc1-um10s - knc1-um10h .
IF NOT ( lfc1 IS INITIAL ) .
open = open + lfc1-umsav +
lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
lfc1-um05s - lfc1-um05h + lfc1-um06s - lfc1-um06h +
lfc1-um07s - lfc1-um07h + lfc1-um08s - lfc1-um08h +
lfc1-um09s - lfc1-um09h + lfc1-um10s - lfc1-um10h.
ENDIF.
WHEN 9.
open = knc1-umsav +
knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
knc1-um07s - knc1-um07h + knc1-um08s - knc1-um08h +
knc1-um09s - knc1-um09h .
IF NOT ( lfc1 IS INITIAL ) .
open = open + lfc1-umsav +
lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
lfc1-um05s - lfc1-um05h + lfc1-um06s - lfc1-um06h +
lfc1-um07s - lfc1-um07h + lfc1-um08s - lfc1-um08h +
lfc1-um09s - lfc1-um09h.
ENDIF.
WHEN 8.
open = knc1-umsav +
knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
knc1-um07s - knc1-um07h + knc1-um08s - knc1-um08h.
IF NOT ( lfc1 IS INITIAL ) .
open = open + lfc1-umsav +
lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
lfc1-um05s - lfc1-um05h + lfc1-um06s - lfc1-um06h +
lfc1-um07s - lfc1-um07h + lfc1-um08s - lfc1-um08h .
ENDIF.
WHEN 7.
open = knc1-umsav +
knc1-um01s - knc1-um01h + knc1-um02s - knc1-um02h +
knc1-um03s - knc1-um03h + knc1-um04s - knc1-um04h +
knc1-um05s - knc1-um05h + knc1-um06s - knc1-um06h +
knc1-um07s - knc1-um07h .
IF NOT ( lfc1 IS INITIAL ) .
open = open + lfc1-umsav +
lfc1-um01s - lfc1-um01h + lfc1-um02s - lfc1-um02h +
lfc1-um03s - lfc1-um03h + lfc1-um04s - lfc1-um04h +
lfc1-um05s - lfc1-um -
Intersperse daily totals with opening and closing balance
Hi All
Suppose we have a data set (simplified from my query but will suffice)
select 1 as daynum, 'CR' as trantype, 200 as amount from dual union all
select 1 as daynum, 'DR' as trantype, -300 as amount from dual union all
select 2 as daynum, 'CR' as trantype, 800 as amount from dual union all
select 2 as daynum, 'DR' as trantype, -200 as amount from dual union all
select 3 as daynum, 'CR' as trantype, 900 as amount from dual union all
select 3 as daynum, 'DR' as trantype, -500 as amount from dual
)How would you go about getting a result set that looks like:
1, Opening Balance, 0
1, CR, 200
1, DR, -300
1, Closing Balance, -100
2, Opening Balance, -100
2, CR, 800
2, DR, -200
2, Closing Balance, 500
3, Opening Balance, 500
3, CR, 900
3, DR, -500
3, Closing Balance, 900
4, Opening Balance, 900
4, Closing Balance, 900
I'm thinking:
generate an arbitrary number of rows for the number of days I want to report over (in this case, 4)
cross join these with 2 row set of constants "opening" and "closing" balanace
-> I have now an opening and closing balance row for every day
union it with my data so that "opening/CLosing balance" is a type too (and nulls in the amount column)
case when the type is like '%Balance' then sum(amount) over(order by day, orderkind rows unbounded preceding) else amount
(orderkind is a constant 0 for opening, 1 for all the datarows, 2 for closing)
Is it right?
Is there a better way?
Edited by: charred on Apr 1, 2010 7:03 AMUnless I'm missing something, Tom's answer won't work for more than 4 days?
with t as
select 1 as daynum, 'CR' as trantype, 200 as amount from dual union all
select 1 as daynum, 'DR' as trantype, -300 as amount from dual union all
select 2 as daynum, 'CR' as trantype, 800 as amount from dual union all
select 2 as daynum, 'DR' as trantype, -200 as amount from dual union all
select 3 as daynum, 'CR' as trantype, 900 as amount from dual union all
select 3 as daynum, 'DR' as trantype, -500 as amount from dual union all
select 4 as daynum, 'CR' as trantype, 900 as amount from dual union all
select 4 as daynum, 'DR' as trantype, -500 as amount from dual union all
select 5 as daynum, 'CR' as trantype, 900 as amount from dual union all
select 5 as daynum, 'DR' as trantype, -500 as amount from dual
data
as
( select daynum, r
from (select level daynum from dual connect by level <= 4),
(select level r from dual connect by level <= 2 )
select daynum,
r,
ttype,
amt,
case when ttype in ( 'close', 'open' )
then sum(samt) over (order by daynum, r)
end theamount
from (
select data.daynum,
data.r,
case when (nvl(t.trantype,'CR') = 'CR' and data.r = 1 )
then 'open'
when (nvl(t.trantype,'DR') = 'DR' and data.r = 2)
then 'close'
else t.trantype
end ttype,
case when (t.trantype = 'CR' and r = 2) or (t.trantype = 'DR' and r=1)
then t.amount
end amt,
case when (t.trantype = 'DR' and r = 2)
then sum(case when r=1 then t.amount end) over (partition by data.daynum)
else 0
end samt
from t, data
where data.daynum (+) = t.daynum
order by daynum, r, decode( ttype, 'open', 1, 'CR', 2, 'DR', 3, 'close', 4 );
DAYNUM R TTYPE AMT THEAMOUNT
1 1 open 0
1 1 DR -300
1 2 CR 200
1 2 close -100
2 1 open -100
2 1 DR -200
2 2 CR 800
2 2 close 500
3 1 open 500
3 1 DR -500
3 2 CR 900
3 2 close 900
4 1 open 900
4 1 DR -500
4 2 CR 900
4 2 close 1300
CR
DR Here's a solution using partitioned outer join:
with my_tab as (select 1 as daynum, 'CR' as trantype, 200 as amount from dual union all
select 1 as daynum, 'DR' as trantype, -300 as amount from dual union all
select 2 as daynum, 'CR' as trantype, 800 as amount from dual union all
select 2 as daynum, 'DR' as trantype, -200 as amount from dual union all
select 3 as daynum, 'CR' as trantype, 900 as amount from dual union all
select 3 as daynum, 'DR' as trantype, -500 as amount from dual union all
select 4 as daynum, 'CR' as trantype, 900 as amount from dual union all
select 4 as daynum, 'DR' as trantype, -500 as amount from dual union all
select 5 as daynum, 'CR' as trantype, 900 as amount from dual union all
select 5 as daynum, 'DR' as trantype, -500 as amount from dual),
dummy as (select 1 id, 'Opening Balance' descr from dual union all
select 2 id, 'CR' descr from dual union all
select 3 id, 'DR' descr from dual union all
select 4 id, 'Closing Balance' descr from dual)
select mt.daynum,
d.descr,
decode(d.id, 1, 0,
2, amount,
3, amount,
4, amount + lag(amount, 2) over (partition by mt.daynum order by d.id)) amount
from my_tab mt
left outer join dummy d partition by (id, descr) on (mt.trantype = d.descr)
where (d.id = 1 and mt.trantype = 'CR')
or (d.id = 2 and mt.trantype = 'CR')
or (d.id = 3 and mt.trantype = 'DR')
or (d.id = 4 and mt.trantype = 'DR')
order by mt.daynum, d.id;
DAYNUM DESCR AMOUNT
1 Opening Balance 0
1 CR 200
1 DR -300
1 Closing Balance -100
2 Opening Balance 0
2 CR 800
2 DR -200
2 Closing Balance 600
3 Opening Balance 0
3 CR 900
3 DR -500
3 Closing Balance 400
4 Opening Balance 0
4 CR 900
4 DR -500
4 Closing Balance 400
5 Opening Balance 0
5 CR 900
5 DR -500
5 Closing Balance 400ETA: And, if there can be any number of CR or DR rows:
with my_tab as (select 1 as daynum, 'CR' as trantype, 200 as amount from dual union all
select 1 as daynum, 'DR' as trantype, -300 as amount from dual union all
select 1 as daynum, 'CR' as trantype, 400 as amount from dual union all
select 1 as daynum, 'DR' as trantype, -500 as amount from dual union all
select 2 as daynum, 'CR' as trantype, 800 as amount from dual union all
select 2 as daynum, 'DR' as trantype, -200 as amount from dual union all
select 3 as daynum, 'CR' as trantype, 900 as amount from dual union all
select 3 as daynum, 'DR' as trantype, -500 as amount from dual union all
select 4 as daynum, 'CR' as trantype, 900 as amount from dual union all
select 5 as daynum, 'CR' as trantype, 900 as amount from dual union all
select 5 as daynum, 'CR' as trantype, 200 as amount from dual union all
select 5 as daynum, 'DR' as trantype, -500 as amount from dual union all
select 6 as daynum, 'DR' as trantype, -200 as amount from dual),
dummy as (select 1 id, 'Opening Balance' descr from dual union all
select 2 id, 'CR' descr from dual union all
select 3 id, 'DR' descr from dual union all
select 4 id, 'Closing Balance' descr from dual)
select mt.daynum,
d.descr,
mt.trantype,
decode(d.id, 1, 0,
2, amount,
3, amount,
4, sum(decode(d.id, 1, 0, 4, 0, amount)) over (partition by mt.daynum)) amount
from (select mt1.*, row_number() over (partition by mt1.daynum order by mt1.trantype) rn
from my_tab mt1) mt
left outer join dummy d partition by (id, descr) on (mt.trantype = d.descr)
where case when d.id = 1 and rn = 1 then 1
when d.id = 2 and mt.trantype = 'CR' then 1
when d.id = 3 and mt.trantype = 'DR' then 1
when d.id = 4 and rn = 1 then 1
else 0
end = 1
order by mt.daynum, d.id;
DAYNUM DESCR TRANTYPE AMOUNT
1 Opening Balance CR 0
1 CR CR 400
1 CR CR 200
1 DR DR -300
1 DR DR -500
1 Closing Balance CR -200
2 Opening Balance CR 0
2 CR CR 800
2 DR DR -200
2 Closing Balance CR 600
3 Opening Balance CR 0
3 CR CR 900
3 DR DR -500
3 Closing Balance CR 400
4 Opening Balance CR 0
4 CR CR 900
4 Closing Balance CR 900
5 Opening Balance CR 0
5 CR CR 900
5 CR CR 200
5 DR DR -500
5 Closing Balance CR 600
6 Opening Balance DR 0
6 DR DR -200
6 Closing Balance DR -200Edited by: Boneist on 16-Apr-2010 17:10 -
Reports for Itemwise ageing and Stock with opening and closing
Dear All,
Is there any default reports in SAP for Item wise ageing and the stock status with
opening stock,In and Out stock and closing stock
for a given period.
Regards,
ShyamHi,
Thanks for the quick reply.....But is there any accurate query for that....Bcoz i found a query which shows the qty but nothing is coming in the value...
Regards,
shyam -
Problem with opening and closing windows
Hi,
I have a Flex Desktop Application with a Splash screen that
displays for 5 seconds which is the initial WindowedApplication
which uses script to centre itself in the screen at 400 x 300.
It then loads and opens up a Window where people login and
closes the splash screen (using NativeWindow.close) - the login
window it opens is again 400 x 300 and centred on the screen.
When the user susccessfully logins in, the login window needs
to load and open a Window called MainWindow which is when my
software will actually begin - this MainWindow needs to be
maximised so I have a script inside it that does this
(NativeWindow.maximise). The login window also needs to close and
this is where my problem lies. I keep getting a problem when I use
NativeWindow.close in the login window and then open the MainWindow
and run the NativeWindow.maximise.
Any suggestions or ideas on how I can do this better? This is
my first Flex application and I'm just a beginner.
I can send the Flex archive if required.Hi,
Please check out the URLs below.
http://www.adobe.com/devnet/air/flex/quickstart/creating_transparent_window.html
http://www.adobe.com/devnet/air/flex/quickstart/launching_windows.html
http://www.adobe.com/devnet/air/flex/quickstart/
Hope this helps. -
Re: Safari Freeze with open and closing repeatly!!! HELP
Hi guys, I'm new here and it's because of Lion.
Recently I'm facing some freeze problem on my Lion when I opening Safari and Mail. It will freeze up my Mac and eventually shutting it off by the "hard way".
But today, my safari freeze once every 10times of opening (average) which is really annoying.
I have verify my disk verify whatever there have in disk utility. Reformated the hardisk, Installed Snow leopard and reinstalled Lion 3 times and it does not help the safari. And ofcourse I did whatever updates there have.
Besides, I have tried "APPLE HARDWARE TEST". everythings is fine here.
But when I create a new guest account on Lion, the safari there won't freeze and run smoothly. But I wouldn't want to move all my stuff there.
It's been really annoying since today as I hardly able to launch Safari and type this out.
PLEASE HELP ME ALL THE EXPECT OUT THERE !!!!Just for the record, this had nothing to do with Safari.
facebook was down for a number hours today:
http://www.bbc.co.uk/news/technology-17284437 -
Problem with opening and closing the lid
when i am trying to open or close the notebook lid..there is sound of crack, there is no any physical damage happened in past with my notebook....
Hello Paresh9023
Welcome to the HP Forums!
I understand there is a sound coming from your notebook when you close it. Whenever something like this occurs, you should contact HP support immediately for assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks!
Mario
I worked on behalf of HP. -
Opening and Closing balance in FBL3N?
Hi All,
In other ERP systems, if you browse GL Account, i.e. FBL3N in SAP, you get the list of documents within specified period but in other systems you also get the OPENING balance as well as CLOSING balance and the current postings are in between them. Is there any standard report or report painter is to be used for such requirement.
Balances can be checked through FS10N and S_ALR_87012301 etc. but requirement is to get the list of documents with opening and closing balance in beginning and end of the report. The best example is of Cash Journal (Txn FBCJ)
ThanksThank you Will,
Yes, actually if other system provide such functionality then SAP should be providing that. I searched within table TSTC for such transaction but unable to get. Accountants requirement is when they execute FBL3N within specified period, the cummulative opening balance and closing balance should be provided with report.
Thanks for your answer!
Regards,
Nayab -
Hi sapgurus
I need a report with similar to MB5B at particular posting date with opening and closing balances but I am unable to download the report to excel the data with MB5B tranasaction.Is there any similar transaction with same output values which can be easily transported to excel from Sap.
ThanxHi,
I tested in ECC6.0 and i could able to do so, you try as mentioned below.
In the output screen of MB5B, goto menu details > click on list > select save > select file > select spreadsheet. Here you can save tthe output in excel format.
Regards,
Prabu -
I have an iphone 4. Recently I have issues with certain apps closing immediately once they are opened.(ie Email). Tried re-booting entire phone and still having issues. Any one else having this issue or know a fix for it?
Delete background Apps from memory and then Reset.
To Delete background Apps, double click Home button, in the bar at bottom, hold down on an App Icon until the minus sign appears, tap all the minus signs, until all background Apps are cleared from memory. Then Reset, hold both Home and Power buttons until the iPhone begins to restart itself, ignor the 'slide to power off' let the iPhone restart itself. Usually takes about 10 seconds of holding both buttons.
Maybe you are looking for
-
In safari video is not working for a ipcam
in safari video is not working for a ipcam
-
Adobe presenter - presentation running slow
Hi, I wonder if anyone can help with a problem with adobe presenter. One of our users is creating presentations in adobe presenter - when she sends them to other people they run fine but on her PC they run in slow motion. e.g. a slide which is meant
-
Archivelink Signature Public Exponent
Hi guys, I am trying to generate a certificate for signing the URL for the Archivelink interface. The documentation stated that the public exponent has to be equal to (2^16)+1. Does anybody know how important that condition is? The reason I am asking
-
Unable to connect to oracle using type4 driver
hi I was trying to connect to oracle Database using type 4 thin drivers on win98. I downloaded the driver from oracle site and also downloaded some more drivers from other sites.While connecting to data base I ran into problems I am wo
-
Hi I am trying to activate my account but it says it is already in use?
Hi I am trying to use my vista 64 windows and it says it is already in use in another computer. My past computer broke down and I had vista on that. They had to install a whole new motherboard and some other stuff. But now I can not activate widows.