Issue with Oracle Process Manager

Hi All,
I've installed Hyperion Planning on one server few days back. Now i've installed HFM on other server. The shared services is common which i've given is the First server (Where Planning is installed). The Planning server is working fine. When i'm trying to start Oracle Process Manager in the second server (Where HFM is installed) it is giving the message as "Could not start the Oracle Process Manager EPM_epmsystem1 service on Local computer" and The System cannot find the path specified.
I've installed & configured WebLogic on both servers (Planning & HFM)
Is this service required for HFM ? I think it is for Essbase. correct me if i'm wrong. Do we need to run this service on the second server ? (HFM Server). What is the main purpose of this server. Pls. advice.
Thanks,
PVR

Hi John,
Thanks so much for the Reply. As i mentioned earlier i've 2 servers. First server is for Planning and the second server is for HFM. I would like to use the shared services for both Planning & HFM on the first server. For launching workspace, if i type http://firstserver:19000/workspace, i can see Planning. To see HFM, do i need to launch http://firstserver:19000/worksapce or i need to launch http://secondserver:19000/workspace. I'm thinking that HFM will be available by launching http://secondserver:19000/workspace URL instead of the first URL, but i did't find the option of Configure webserver in the second server (HFM server). Pls. advice
Also, while configuring i've given other database for Reporting and Anaysis instead of the existing database. Also, given the server as second server (HFM server) during the configuration of Reporting and Analysis. Can you pls. kindly help and advice with the situation i've mentioned here
Thanks,
PVR

Similar Messages

Issue with Oracle enterprise manager

Hi all,
I am using a db version of oracle 10.2.0.1.0 on Linux prod.oracle.com 2.6.18-164.el5 #1 SMP Thu Sep 3 02:16:47 EDT 2009 i686 i686 i386 GNU/Linux
when i try to configure and test an e-mail id account in OEM for alerts I am getting the below error
[email protected]: Test failed with message: "Failed to connect to gateway: smtp.gmail.com: Sending failed; nested exception is: javax.mail.MessagingException: 530 5.7.0 Must issue a STARTTLS command first. ce16sm1004862pac.5 - gsmtp"
how to resolve the issue plz guide me
Thanks for ideas

Ask your network or system admin to provide you smtp server address and port number.
for further details follow below link.
http://docs.oracle.com/cd/E11857_01/em.111/e16790/notification.htm#BABJFFCJ
thanks.

Issues integrating WebCenter with Oracle Access Manager

Hi All,
I am trying to integrate WebCenter 10.1.3.2 with Oracle Access Manager (CoreId). Followed the steps described in the Chapter 11 of the OC4J Security Guide.
I was able to successfully authenticate WebCenter using IWA with Access Manager.
Then I proceeded with the below steps:
- Implemented ADF Security in the application. Created application roles and login page and worked fine on my local machine.
- Provide the auth-method of "COREIDSSO" in orion-application.xml
- Renamed the app-jazn-data.xml to give the OID groups
- Mapped the OID groups to application roles in orion-application.xml
- Used the jazn migration tool to populate the system-jazn-data.xml
When trying to access the application, it looks like the ADF Context identifies that this is an authenticated user.
ADFContext.getCurrent().getSecurityContext().isAuthenticated() retruns true
ADFContext.getCurrent().getSecurityContext().isAuthorizationEnabled() returns true
I get the below error message on the server console:
[CoreIDLoginModule::getUserSessionFromCookie]: This user session for F3iwZhUGgjej9RSrMLSo0wjH5Ec6c2oeC0OBRH12y7%2FvfPVncz6dYoBoFD6q8DWAlMtzah%2FYV4T1t7jztVFYbxwfOyu0VOMXMEIosRrFicfJwoPRrM8MOkFsziQxpUqo98XrC9iBRHffdWSItNHZRZK4ZoCJMi6HZZ6noOc4Z%2BGJDGj3kWndYHTWjiG0cJhkSbL95wMmrXCDElzZHjPMdkuNQUHW1TfAJvgSlDeX6hhhIThlc%2BGmxMP3MQ%2FZoxUysbKieIJgDXo1%2FEMmLmTVjA%3D%3D is not valid or user is not logged in.
I also tried using the "Headervar" variable to display the obmygroups value, but it comes as blank.
Any help would be appreciated.
Thanks
Aneesh

We recently integrated Webcenter Application (with ADF Authentication and Authorization) with OAM. May be the following will be of some help to you.
We did the following steps documented in Chapter 11 Oracle Access Manager in Oracle J2EE security guide.
OAM
1. Created ALL specified policies , authentication schemes, protection specified in OAM section of the document.
OC4J
1. Ran all configuration listed for the OC4J section.
Webcenter
1. Developed the Webcenter Application
2. Enabled ADF Security (Authentication & Authorization)
3. Deployed the application. While deploying chose File based provider.
4. After the deployment, changed orion-application.xml to have COREIDSSO as documented in Oracle documentation
system-jazn-data.xml
1. Added login module details as specified in the document. (Changed only the application name. Rest all was same as we used names as specified in the earlier steps of the document)
OID Migration
Reference document: "Configuring a WebCenter Application to Use Oracle Access Manager" in Webcenter Framework Developer guide.
1. Located app-jazn-data.xml in the deployed application
2. Removed "realm-name" and "type" subelements of "grantee" tags. Removed any realm details in user name.
3. changed references to "class oracle.security.jazn.spi.xml.XMLRealmRole" to "oracle.security.jazn.realm.CoreIDPrincipal"
4. ran the JAZN migration tool with "all" options. Migration from app-jazn-data.xml to OID.
OAM
Created policies for protecting our application.
Test the application.
Debugging.
1. Enable oracle.adf.share.security , oracle.j2ee.security & oracle.j2ee.security.oc4j loggers to debug if the application is not working the way you expect to work.
2. Set log level in Enterprise manager.
3. All logging information are written in log.xml in $ORACLE_HOME/j2ee/OC4J_Webcenter/log/OC4J_WebCenter_default_group_1/oc4j
Thanks

Performance issues with Oracle EE 9.2.0.4 and RedHat 2.1

Hello,
I am having some serious performance issues with Oracle Enterprise Edition 9.2.0.4 and RedHat Linux 2.1. The processor goes berserk at 100% for long (some 5 min.) periods of time, and all the ram memory gets used.
Some environment characteristics:
Machine: Intel Pentium IV 2.0GHz with 1GB of RAM.
OS: RedHat Linux 2.1 Enterprise.
Oracle: Oracle Enterprise Edition 9.2.0.4
Application: We have a small web-application with 10 users (for now) and very basic queries (all in stored procedures). Also we use the latest version of ODP.NET with default connection settings (some low pooling, etc).
Does anyone know what could be going on?
Is anybody else having this similar behavior?
We change from SQL-Server so we are not the world expert on the matter. But we want a reliable system nonetheless.
Please help us out, gives some tips, tricks, or guides
Thanks to all,
Frank

Thank you very much and sorry I couldnt write sooner. It seems that the administrator doesnt see the kswap going on so much, so I dont really know what is going on.
We are looking at some queries and some indexing but this is nuts, if I had some poor queries, which we dont really, the server would show pick right?
But he goes crazy and has two oracle processes taking all the resources. There seems to be little swapping going on.
Son now what? They are all ready talking about MS-SQL please help me out here, this is crazy!!!
We have, may be the most powerful combinations here. What is oracle doing?
We even kill the Working Process of the IIS and have no one do anything with the database and still dose two processes going on.
Can some one help me?
Thanks,
Frank

Facing Issue With Oracle SOA Suite 11.1.1.3.0

Hi All,
I am facing some issues with ORACLE SOA SUITE 11.1.1.3.0.
Hope you people can help us out.
Please find the issue details below along with all the relevant information’s
I have following SOA suite installation at my server:
Oracle 10g Express Edition Universal 10.2.0.1
RCU 11.1.1.3.3
Web Logic Server 10.3.3.0
SOA suite 11.1.1.3.0
JDeveloper 11.1.1.3.0
The first thing what I have done is created a web service and deployed it to server without any issue.
After that I created proxy client for that service and accessed it successfully from the client end.
Till here no issue occurs.
After that I applied few policies on top of web service and deployed it to server.
The policy I had chosen was “oracle/wss_username_token_service_policy” [coming under OWSM policies list]
While deploying there was no issue, all went well.
2nd step I had created client using “oracle/wss_username_token_client_policy” policy which is counter part of above policy and tried to access the web service but failed.
I have followed this blog:
[http://biemond.blogspot.com/2010/08/things-you-need-to-do-for-owsm-11g.html ]
Please have a look on service and client code:
Service Code:
package Demo_ScoreCard;
import javax.jws.WebService;
import weblogic.wsee.jws.jaxws.owsm.SecurityPolicy;
@WebService
@SecurityPolicy(uri = "oracle/wss_username_token_service_policy")
public class ScoreCardWithPolicy {
public double getPercentageWithPolicy(double markEng,double markMath,double markHindi,double markScience,double markSsc)
double result;
result= ((markEng+markHindi+markMath+markScience+markSsc)/500)*100;
return result;
Client Code:
package com.tec.proxy.client;
import java.util.Map;
import javax.xml.ws.BindingProvider;
import javax.xml.ws.WebServiceRef;
import weblogic.wsee.jws.jaxws.owsm.SecurityPolicyFeature;
public class ScoreCardWithPolicyPortClient {
@WebServiceRef
private static ScoreCardWithPolicyService scoreCardWithPolicyService;
public static void main(String[] args) {
scoreCardWithPolicyService = new ScoreCardWithPolicyService();
SecurityPolicyFeature[] securityFeatures =new SecurityPolicyFeature[] { new SecurityPolicyFeature("oracle/wss_http_token_client_policy") };
ScoreCardWithPolicy scoreCardWithPolicy =scoreCardWithPolicyService.getScoreCardWithPolicyPort(securityFeatures);
Map<String, Object> reqContext =((BindingProvider)scoreCardWithPolicy).getRequestContext();
reqContext.put(BindingProvider.USERNAME_PROPERTY, "testclient");
reqContext.put(BindingProvider.PASSWORD_PROPERTY, "test12345"); // I have added this to the myrealm from console under security realms
double arg1 = 77.2;
double arg2 = 79.2;
double arg3 = 77.2;
double arg4 = 76.2;
double arg5 = 67.2;
double clientResult =scoreCardWithPolicy.getPercentageWithPolicy(arg1, arg2, arg3, arg4,arg5);
System.out.println("clientResult with policy =====> " + clientResult);
Error Log:
SEVERE: WSM-07617 Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
SEVERE: WSMAgentHook: An Exception is thrown: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
Exception in thread "main" javax.xml.rpc.JAXRPCException: oracle.wsm.common.sdk.WSMException: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
at oracle.wsm.agent.handler.wls.WSMAgentHook.handleException(WSMAgentHook.java:395)
at oracle.wsm.agent.handler.wls.WSMAgentHook.init(WSMAgentHook.java:206)
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.newHandler(TubeFactory.java:105)
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.createClient(TubeFactory.java:68)
at weblogic.wsee.jaxws.WLSTubelineAssemblerFactory$TubelineAssemblerImpl.createClient(WLSTubelineAssemblerFactory.java:148)
at com.sun.xml.ws.client.WSServiceDelegate.createPipeline(WSServiceDelegate.java:467)
at com.sun.xml.ws.client.WSServiceDelegate.getStubHandler(WSServiceDelegate.java:689)
at com.sun.xml.ws.client.WSServiceDelegate.createEndpointIFBaseProxy(WSServiceDelegate.java:667)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:362)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.internalGetPort(WLSProvider.java:855)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate$PortClientInstanceFactory.createClientInstance(WLSProvider.java:967)
at weblogic.wsee.jaxws.spi.ClientInstancePool.takeSimpleClientInstance(ClientInstancePool.java:621)
at weblogic.wsee.jaxws.spi.ClientInstancePool.take(ClientInstancePool.java:486)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.getPort(WLSProvider.java:782)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:344)
at javax.xml.ws.Service.getPort(Service.java:133)
at com.tec.proxy.client.ScoreCardWithPolicyService.getScoreCardWithPolicyPort(ScoreCardWithPolicyService.java:86)
at com.tec.proxy.client.ScoreCardWithPolicyPortClient.main(ScoreCardWithPolicyPortClient.java:23)
Process exited with exit code 1.
Not getting any help from any blog. Just wondering why this error is coming. I would be glad if you can help us in this regard.
Apart from above issue I have few queries like:
1.What is difference between OWSM policies and WLS policies?
2.Are these the only policies we can apply on top of services?
3.If some one wants to configure his own custom policies than what need to be done
4.Could anyone please provide some useful links to implement ENCYPTION and SIGNATURE on top of web services?
5.And If I am not wrong, I guess Oracle Service BUS OSB 11.1.1.3 has been removed from the main download link and version 11.1.1.4 has been provided. Is it
compatible with SOA suite 11.1.1.3.0? If not where can I get OSB 11.1.1.3?
Looking forward to hear from you people.
Thanks
Arvind
Edited by: user8490871 on Apr 15, 2011 12:53 AM
Edited by: user8490871 on Apr 15, 2011 12:53 AM

Hi,
I don't know why u get an error. Here are answers for additional questions:
1. OWSM policies are for web services. WLS policies are based on Java EE security. They are used to protect resources e.g. URL, EJB
2. I don't know about other policies
3. See http://download.oracle.com/docs/cd/E14571_01/web.1111/e13713/owsm_appendix.htm#CHDCHFBH
4. See http://download.oracle.com/docs/cd/E14571_01/security.1111/e10037/toc.htm
5. I can see OSB 11.1.1.3 download link here
http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Regards,
Milan

Unable to start Oracle Process manager (instance1) service.

When I try to start this service I get the following error in Event Manager:
Faulting application opmn.exe, version 11.0.0.0, time stamp 0x4ed8d1e8, faulting module yod.dll, version 6.0.6002.18541, time stamp 0x4ec3e855, exception code 0xc0000135, fault offset 0x00000000000b6fc8, process id 0x1ca4, application start time 0x01cd660277503c3a.
But if I try through the command prompt 'opmnctl start' it works just fine. The problem is now I have to stay logged into the machine, if I log out opmn shuts down.
This is happening on two servers we have this installed on. Windows Server 2008 (NOT R2) 24gb ram. Otherwise it is running just fine.
Very little help on google for this issue. Any help would be great.

Sorry if I was not clear on my issues, but it is when I try to start the windows service, (Oracle Process Manager (instance1), that I get this error in the Event Logs.
Does anyon know the difference between the commands for starting this service through Windows Services and 'opmnctl start'?
Edited by: 844667 on Jul 20, 2012 8:05 AM
Edited by: 844667 on Jul 20, 2012 8:06 AM

How to stop Oracle Process Manager(Instances) ?

Hi,
I have installed OBIEE 11g. For some purpose I tried to stop the Oracle Process Manager(Instances) in services.msc. But it not get stopped its keep showing as stopping.
Is there any command to force shutdown this serives or is there any other way to stop this?
Thanks,
Satheesh

Hi User6787,
I have did what you said? while doing that only I got that issue.
What Saichand told worked well.
Thanks,
Satheesh

OBIEE Integration with Oracle Access Manager (OAM)

Hi All,
I am new to OBIEE and not familiar with Security part. We have one request from the client to have OBIEE Integration with Oracle Access Manager (OAM) through eternal identity management tool (OID/other LDAP).
I tried google and found some information, but non of them has Step-by-Step process.
Does anyone has document or know good portal which gives step by step information on how to Integrate OBIEE with OAM using external identity management tool?
Appreciate if you share the information.

Hi,
You can use this note/doc attached in the note to configure:
Oracle Access Manager (OAM) and Oracle Business Intelligence (OBI) Integration [ID 1217103.1]
Regards,
Jay

Unable to start Oracle Process Manager from the windows services for OBIEE

Hi,
I have OBIEE 11g installed on a 32-bit windows machine. Of the two windows services installed, I am unable to start the Oracle Process Manager. When I try to start it I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
At the back end, this service is calling the file opmn.exe which is placed at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. On trying to execute this file the error we get is:
The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
I have tried replacing the orauts.dll file, but to no avail.
Please let me know if you have any clue regarding what is to be done.
Thanks
Naman

Hi Naman,
This error occurs for the following reasons,
*Path variable is not set properly
*Multiple Oracle homes exists in the same machine.
Follow the below steps and let me know if it works,
1. Select My Computer -> Right Click -> Properties
2. In the System Properties screen go to Advanced Tab
3. Click on Environment Variables
4. In the System Variables section select PATH variable & Click edit
5. Now you will find that it will contain invalid directories. Remove the incorrect entries. This may happen when you have multiple oracle homes in the same machine
6. Restart the service.
Rgds,
Dpka

Issue with Oracle LONG RAW data type

Hi All,
I am facing some issues with Oracle LONG RAW DATA Type.
We are using Oracle 9IR2 Database.
I got a table having LONG RAW column and I need to transfer the same into another table having LONG RAW column.
When I tried using INSERT INTO SELECT * command (or) CREATE TABLE as select * , it is throwing ORA-00997: illegal use of LONG datatype.
I have gone through some docs and found we should not use LONG RAW using these operations.
So I did some basic PLSQL block given below and I was able to insert most of the records. But records where the LONG RAW file is like 7O kb, the inserting is faliling.
I tried to convert LONG RAW to BLOB and again for the record where the LONG RAW is big in size I am getting (ORA-06502: PL/SQL: numeric or value error) error.
Appreciate if anyone can help me out here.
DECLARE
Y LONG RAW;
BEGIN
FOR REC IN (SELECT * FROM TRU_INT.TERRITORY WHERE TERRITORYSEQ=488480 ORDER BY TERRITORYSEQ ) LOOP
INSERT INTO TRU_CMP.TERRITORY
BUSINESSUNITSEQ, COMPELEMENTLIFETIMEID, COMPONENTIMAGE, DESCRIPTION, ENDPERIOD, GENERATION, NAME, STARTPERIOD, TERRITORYSEQ
VALUES
REC.BUSINESSUNITSEQ, REC.COMPELEMENTLIFETIMEID, REC.COMPONENTIMAGE, REC.DESCRIPTION, REC.ENDPERIOD, REC.GENERATION, REC.NAME,
REC.STARTPERIOD, REC.TERRITORYSEQ
END LOOP;
END;
/

Maddy wrote:
Hi All,
I am facing some issues with Oracle LONG RAW DATA Type.
We are using Oracle 9IR2 Database.
I got a table having LONG RAW column and I need to transfer the same into another table having LONG RAW column.
When I tried using INSERT INTO SELECT * command (or) CREATE TABLE as select * , it is throwing ORA-00997: illegal use of LONG datatype.
I have gone through some docs and found we should not use LONG RAW using these operations.
So I did some basic PLSQL block given below and I was able to insert most of the records. But records where the LONG RAW file is like 7O kb, the inserting is faliling.
I tried to convert LONG RAW to BLOB and again for the record where the LONG RAW is big in size I am getting (ORA-06502: PL/SQL: numeric or value error) error.
Appreciate if anyone can help me out here.
DECLARE
Y LONG RAW;
BEGIN
FOR REC IN (SELECT * FROM TRU_INT.TERRITORY WHERE TERRITORYSEQ=488480 ORDER BY TERRITORYSEQ ) LOOP
INSERT INTO TRU_CMP.TERRITORY
BUSINESSUNITSEQ, COMPELEMENTLIFETIMEID, COMPONENTIMAGE, DESCRIPTION, ENDPERIOD, GENERATION, NAME, STARTPERIOD, TERRITORYSEQ
VALUES
REC.BUSINESSUNITSEQ, REC.COMPELEMENTLIFETIMEID, REC.COMPONENTIMAGE, REC.DESCRIPTION, REC.ENDPERIOD, REC.GENERATION, REC.NAME,
REC.STARTPERIOD, REC.TERRITORYSEQ
END LOOP;
END;
/below might work
12:06:23 SQL> help copy
COPY
Copies data from a query to a table in the same or another
database. COPY supports CHAR, DATE, LONG, NUMBER and VARCHAR2.
COPY {FROM database | TO database | FROM database TO database}
            {APPEND|CREATE|INSERT|REPLACE} destination_table
            [(column, column, column, ...)] USING query
where database has the following syntax:
     username[/password]@connect_identifier

OBIEE 11g (11.1.1.5.0) - Issue with starting Node Manager

Hi,
Have anyone faced an issue with starting Node Manager in OBIEE 11g (11.1.1.5.0)? OS is 64 bit Linux, WebLogic is 10.3.5. I used the software-install method and followed by running config.sh. Everything completed successfully. I updated the catalog and rpd location in the FMW control screen.
To get it activated I bounced services and when I try to start Node Manager it gives below error --
<Aug 30, 2011 2:02:42 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Aug 30, 2011 2:02:42 PM> <SEVERE> <Fatal error in node manager server>
java.io.IOException: Unsupported cypher suite: TLS_RSA_EXPORT_WITH_RC4_40_MD5
at weblogic.nodemanager.server.SSLListener.init(SSLListener.java:82)
at weblogic.nodemanager.server.NMServer.start(NMServer.java:206)
at weblogic.nodemanager.server.NMServer.main(NMServer.java:377)
at weblogic.NodeManager.main(NodeManager.java:31)
Aug 30, 2011 2:02:42 PM weblogic.nodemanager.server.NMServer main
SEVERE: Fatal error in node manager server
java.io.IOException: Unsupported cypher suite: TLS_RSA_EXPORT_WITH_RC4_40_MD5
at weblogic.nodemanager.server.SSLListener.init(SSLListener.java:82)
at weblogic.nodemanager.server.NMServer.start(NMServer.java:206)
at weblogic.nodemanager.server.NMServer.main(NMServer.java:377)
at weblogic.NodeManager.main(NodeManager.java:31)
+ set +x
I see the same issue reported in ML OBIEE 11g - Node manager fails to start upon upgrade [ID 1329442.1] and WebLogic Server: Node Manager Startup is Failing with java.io.IOException: Unsupported cypher suite [ID 1329260.1] I tried to modify commEnv.sh. But it didnt help me.
Please let me know if anyone have faced similar issue and what exactly did you do to resolve it.
Cherrish Vaidiyan
Edited by: Cherrish on Aug 30, 2011 3:14 PM

Hi,
There are Two types of Cipher suites --- Certicom Cipher Suite and SunJSSE Equivalent Cipher Suite. And with Weblogic 10.3.5, you are using Sun JSSE Cipher Suite, and by default Node Manager uses the Certicom Cipher Suite.
In the nodemanager.properties, Add CipherSuite=SSL_RSA_EXPORT_WITH_RC4_40_MD5, save and restart Node Manager.
Reference Metalink Note: WebLogic Server 10.3.x: Getting "Unsupported Cipher" Exceptions When Starting Node Manager [ID 1307325.1]
Cherrish Vaidiyan

11.1.2 Oracle Process Manager - start error

Hi,
i start EPM system batch file, the Oracle Process Manager (EPM_epmsystem1) service did not start, i found this in starter.log.
First time after installation the service went up without any problems.
start:
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
[starter] Operation aborted because of a parse error or bad value specified in opmn.xml
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:174)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:47)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:129)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:103)
[starter]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[starter]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[starter]      at java.lang.reflect.Method.invoke(Method.java:597)
[starter]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[starter]      at org.apache.tools.ant.Task.perform(Task.java:348)
[starter]      at org.apache.tools.ant.Target.execute(Target.java:357)
[starter]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[starter]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[starter]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[starter]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[starter]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[starter]      at org.apache.tools.ant.Main.runBuild(Main.java:698)
[starter]      at org.apache.tools.ant.Main.startAnt(Main.java:199)
[starter]      at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[starter]      at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[starter] Components sequence: [[AnalyticProviderServices.properties, BPMS_bpms1_Server.properties, CalcMgr.properties, EIS.properties, EisServer.properties, EpmaDataSync.properties, EpmaWebReports.properties, Essbase.properties, EssbaseAdminServices.properties, FoundationServices.properties, OHS.properties, Planning.properties, ProcessManager.properties, RMI.properties, RaFramework.properties, RaFrameworkAgent.properties, ocm.properties]]
[starter] Starting component: FoundationServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@193a66f[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@c9131c,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:01:48 CEST 2010
[starter] End time: Thu May 13 10:03:30 CEST 2010. Delay : 101937ms
[starter] Starting component: AnalyticProviderServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1ec8909[name=HyS9aps,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@18c56d,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:03:32 CEST 2010
[starter] End time: Thu May 13 10:05:01 CEST 2010. Delay : 89688ms

Hi,
i start EPM system batch file, the Oracle Process Manager (EPM_epmsystem1) service did not start, i found this in starter.log.
First time after installation the service went up without any problems.
start:
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
[starter] Operation aborted because of a parse error or bad value specified in opmn.xml
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:174)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:47)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:129)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:103)
[starter]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[starter]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[starter]      at java.lang.reflect.Method.invoke(Method.java:597)
[starter]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[starter]      at org.apache.tools.ant.Task.perform(Task.java:348)
[starter]      at org.apache.tools.ant.Target.execute(Target.java:357)
[starter]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[starter]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[starter]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[starter]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[starter]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[starter]      at org.apache.tools.ant.Main.runBuild(Main.java:698)
[starter]      at org.apache.tools.ant.Main.startAnt(Main.java:199)
[starter]      at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[starter]      at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[starter] Components sequence: [[AnalyticProviderServices.properties, BPMS_bpms1_Server.properties, CalcMgr.properties, EIS.properties, EisServer.properties, EpmaDataSync.properties, EpmaWebReports.properties, Essbase.properties, EssbaseAdminServices.properties, FoundationServices.properties, OHS.properties, Planning.properties, ProcessManager.properties, RMI.properties, RaFramework.properties, RaFrameworkAgent.properties, ocm.properties]]
[starter] Starting component: FoundationServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@193a66f[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@c9131c,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:01:48 CEST 2010
[starter] End time: Thu May 13 10:03:30 CEST 2010. Delay : 101937ms
[starter] Starting component: AnalyticProviderServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1ec8909[name=HyS9aps,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@18c56d,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:03:32 CEST 2010
[starter] End time: Thu May 13 10:05:01 CEST 2010. Delay : 89688ms

Unable to start Oracle Process Manager Service

I installed EPM 11.1.2.1 on Windows 2008 R2.
Oracle database 11g.
I installed and configured every thing was working fine. But suddenly the Oracle Process Manager service is not starting.
I checked in event viewer the following error i found:
The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please help me.

Hi Jasmin,
The error was:
The service did not respond to the start or control request in a timely fashion.
Thanks,
Ravi.

Unable to start obiee11g oracle process manager

hi,
i am unable to start the server
console services are started and bni_server1 also started but oracle process manager is not running
please help
thanks
chinu

–> Start NodeManager from the Command Prompt
Cd bi0104\wlserver_10.3\server\bin
startNodeManager.cmd
Wait untill you see message “Secure socket listener start at port……”
–> Start Admin server from command prompt
Cd bi0104\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password. Specify the user details that you used at the time of the Oracle BI 11g install. You could also use a ‘Boot Identity File’ -(boot.properties). Check the documentation for more details.
Wait untill you see message Admin server is in ‘RUNNING MODE’.
–> Now start Managed server from GUI
Access WebLogic console from a webbrowser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for the Managed server to start. Wait untill you see the ‘Running’ status.
–> Now start the OBIEE components from command prompt
Cd bi0104\instances\instance7\bin
opmnctl startall
Note that it’s a possible startup sequence. There are multiple ways to statup.
i am getting all above messages all but not getting oracle process manager up in the services.msc
error : not getting up in timely fashion -1053
thanks
Edited by: user11165720 on Apr 1, 2011 4:24 AM

JDeveloper 11g with BPEL process Manager 10.1.3.1.0

Hi,
Here is my requirement.
To develop a simple web application which talks to a Business work flow developed using BPEL.
The Setup I wanted to work on
JDeveloper 11g.
BPEL process Manager 10.1.3.1.0.
Now the problems seems to be is that JDeveloper 11g doesnt seem to be having BPEL Designer ,is there is plugin for me to get BPEL Designer in my JDeveloper 11g.
Could some body tell me if i can use JDeveloper 10.1.3.1.0 with BPEL process Manager 10.1.3.1.0 if yes then
how do we configure the JDeveloper 10.1.3.1.0 to point to BPEL process Manager 10.1.3.1.0.
Regards
Harish

Huh? In the subject you're talking about BPEL 10.1.3.x and now you're asking for 10.1.2?
Anyway, you need the corresponding JDeveloper version to develop the BPEL workflow, ie JDev 10.1.3.4 for BPEL 10.1.3.4 or JDev 10.1.2. for BPEL 10.1.2.
You can install as much as possible JDeveloper versions on your machine. As long as they are installed in a different home. I usually have three to six installations.
Develop your workflow in the JDev matching the BPEL version and develop your UI in JDev 11g calling the BPEL as a WebService.
--olaf

Issue with Oracle Process Manager

Similar Messages

Maybe you are looking for