Issue with Oracle service bus installation on Windows 7 64 bit machine

Hi,
I am trying to install Oracle service bus 11.1.1.4 in Windows 7 64 bit machine for which i have downloaded the generic installers of both weblogic server and Oracle service bus. As per the instructions -
1. Install JDK 1.6
2. Install Weblogic server
3.Install Eclipse separately (In my case Galileo 11.1.1.5 64 bit) - Just unzip the contents in the home directory where weblogic server is installed
4. Install OSB
I have installed all the above 1,2,3 in the same folder as per the instructions. But when i try to install OSB which asks for eclipse home location. But when i give the eclipse home location, it gives an error ""Home location is invalid" and i am unable to proceed with the installation.
I have tried this with OSB 11.1.1.5 as well and have the same issue.
Does anyone has any links which provides the steps to install OSB in Windows 7 64 bit machines or if someone can help me to resolve the above issue ?
I really appreciate any information on this as it is urgent.
Thanks

I have installed OEPE 11.1.1.6.1 now in the same middleware home as weblogic server but when i try to install OSB 11.1.1.4 in the same middleware home, it asks for OEPE home location. Even though i provide the OEPE home location , it displays as "invalid oepe home location".
I have been struggling to get this sorted out so that i can carry out IDE development in OSB 11.1.1.4
Below are the paths where sfotware are installed -
JDK - C:\Oracle\Middleware\Java\jdk1.6.0_21
Weblogic server - C:\Oracle\Middleware\wlserver_10.3
OEPE - C:\Oracle\Middleware\oepe-galileo-all-in-one-11.1.1.6.0.201007221355-win32-x86_64
Thanks

Similar Messages

Oracle Service Bus Installation on Windows 64bit Professional

Its 28th July 2012, I have been unable to get the OSB platfomt running on my new Windows 7 Laptop. Keep getting the "The selected wizard could not be started.
Plug-in "com.bea.alsb.ui" was unable to instantiate class "com.bea.alsb.ui.wizards.NewALSBContainerWizard. com/bea/alsb/core/containers/exceptions/ContainerException" error while attempting to create a new OSB project from my Eclipse Helios. I have installed OSB 11.1.14, OEPE 11.1.1.6.1 and wls1036_generic but I haven't been able to get the IDE working!
Can anyone tell me the right combination of OSB, OEPE and wls generic installer that really works!........ I would pretty much appreciate and advice that works!..Thanks!

Hi,
OSB is not certified on Windows 7 according to certification matrix...
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It maybe possible to get it running with some workarounds...
Have you seen this thread?
Installation - OSB in 64bit windows 7
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Need a help on implemening SAML with Oracle Service Bus

We are implementing Webservice security using SAML with Oracle Service Bus for our project. We are in dire need of help in implementing the same. We have found some documents (osb console help, osb security) from the oracle web site but those documents have high-level details only. If we get the step-by-step flow and examples of implementing the Webservices security using SAML with Oracle Service Bus, it would be appreciated.
Requirement details:
1. Client application has to generate the SAML assertion (token) and pass that token to the OSB proxy service in a SOAP header along with the request.
2. OSB proxy service gets the authentication token from the inbound request
3. The token is passed to an SAML Identity Assertion provider and validate the token
4. If the token is validated successfully then pass the valid token to appropriate business services.
5. Business services communicates the appropriate external web services after validating the token and gets the response.
Environment details:
1. Oracle Weblogic Application Server 10g3
2. Oracle Service Bus 10g3
Thanks,
Suresh Mani

We are implementing Webservice security using SAML with Oracle Service Bus for our project. We are in dire need of help in implementing the same. We have found some documents (osb console help, osb security) from the oracle web site but those documents have high-level details only. If we get the step-by-step flow and examples of implementing the Webservices security using SAML with Oracle Service Bus, it would be appreciated.
Requirement details:
1. Client application has to generate the SAML assertion (token) and pass that token to the OSB proxy service in a SOAP header along with the request.
2. OSB proxy service gets the authentication token from the inbound request
3. The token is passed to an SAML Identity Assertion provider and validate the token
4. If the token is validated successfully then pass the valid token to appropriate business services.
5. Business services communicates the appropriate external web services after validating the token and gets the response.
Environment details:
1. Oracle Weblogic Application Server 10g3
2. Oracle Service Bus 10g3
Thanks,
Suresh Mani

Oracle Service Bus Installation

Greetings.
We are migrating an Oracle Service Bus infrastructure to a new Hardware Infrastructure in a High Availability environment with two nodes, in the current environment there is one node.
There isn't a hardware load balancer in the new infrastructure, I am thinking in use Oracle WebCache 11g in order to use it as load balancer. But I have some concerns because there isn't any document regarded to use WebCache in front to Oracle Service Bus.
What is the best deployment recomendation to install Oracle Service Bus in a High Availability envirnonment without using a Hardware Load Balancer?
The current Oracle Service Bus projects are writing some messages in some jms queues that uses a FileStore as persitent store. Is there any recommendation to set the JMS Queues in a High Availability environment?
Thanks in advance!
Ramiro Ortíz.

Hi,
OSB is not certified on Windows 7 according to certification matrix...
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It maybe possible to get it running with some workarounds...
Have you seen this thread?
Installation - OSB in 64bit windows 7
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

How to get Oracle Service Bus 10gR3 for windows 64 bit

Hi,
I'm looking for Oracle Service Bus 10gR3 and Oracle Data Service Integrator 10gR3 installables for Windows 64-bit. However, I saw the available versions on download section are only for indows 32-bit. I'm using win 64-bit to detect 4BG RAM or more which is not possible in win 32-bit.
Can anybody help me wheather compatable version are available or is there any solution for that?
Thanks in advance,
Ganesh

Hi Ow;
Please check:
Step-By-Step Install of RAC with OCFS on Windows 2003 [ID 178882.1]
WIN: Does Oracle Cluster File System (OCFS) Support Access from Mapped Drives? [ID 225550.1]
How To Check The Certification Matrix for Real Application Clusters [ID 184875.1]
Regard
Helios

Creating Managed Server for Weblogic that comes with Oracle Service Bus

I've installed Oracle Service Bus 10.3.
Weblogic Server 10.3 comes bundled with OSB 10.3.
Everything is working fine in the Admin Server.
But when I create a Managed server and try to start it, I get the following exception and server doesn't start :
####<Nov 10, 2009 10:24:32 AM IST> <Critical> <Security> <iflmud6dlb5jn> <OSBManagedServer2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257828872747> <BEA-090403> <Authentication for user weblogic denied>
####<Nov 10, 2009 10:24:32 AM IST> <Critical> <WebLogicServer> <iflmud6dlb5jn> <OSBManagedServer2> <main> <<WLS Kernel>> <> <> <1257828872747> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
     at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I've tried changing the boot.properties file and given clear text username and password, but even this did not change the exception.
Are there any other security concerns that are to be taken care of while configuring Managed Server for Oracle Service Bus?
Kindly help.

How are you starting the manageserver. Is it using command line or using NodeManager from Weblogic console of admin server. Most of the times we start managed server using yourDomain/bin/startManagedWebLogic.cmd (.sh).
startManagedWebLogic nameOfYourManagedServer adminURL(Ex: http://host:port).
If you created a managed server at the time of creation of domain itself using custom option, then under your domain root folder, you should see a file named like "startManagedWebLogic_readme.txt" that kind of gives the same above command.
If you added the managed server later on, to an existing single server domain, then you can use the above command.
Ravi Jegga

Regarding Integration of Oracle Service Bus with Oracle Server 10g

Hi,
Could you please provide some docs or links so as to integrate Oracle Database with Oracle Service Bus. The requirement is that the data will be retrieved or saved or updated in the database after recieving inputs from the user. We are using OSB as middle wayer component between ORacle BPM Studio and ORacle Sever 10g. Please provide some help for the same. The data should move to the Oracle Database through ORacle Service Bus.
Thanks,
Abhishek

You need to first create an external resource for ALSB configuration. You can then use the configuration to connect to ALSB and create the structure for transferring the data.
You then have to configure a DB transport for updating the process data using ALSB.
Hope this helps.
Sarat

How do I install Oracle Service Bus?

Much thanks to anyone who can help! I have been a developer for 20 years and I have never had so much trouble with run a setup program.
I am trying to install Oracle Service Bus 11g on a Windows 7 machine. I have successfully installed WebLogic 10.3. The Oracle Service Bus installation program wants me to enter the paths for Oracle Middleware Home, Oracle Home Directory, Weblogic Server Location and OEPE Location. No matter what I enter for these I am told they are incorrect. For example:
Specified Weblogic home location is not a valid location.
Let's concentrate on just the Weblogic home location. I have tried every directory and sub-directory where Weblogic has been installed. No matter what path I enter, I get the error message above.
Setup defaults this path location to C:\bea_default\wlserver_10.3 so I tried copying everything to this path. Still I am told the location is not a valid location. How does anyone ever get this to work? What am I doing wrong?

Hi.
I have exactly the same problem than 786801. In the "Specify Installation Location" screen of the Oracle Service Bus installation process, after providing the correct paths, the message "INST-07248: Specified Weblogic home location is not a valid location" appears.
WebLogic Server 10.3.3 is installed in /opt/oracle/middleware
The folder wlserver_10.3 exists under that path, so I'm entering /opt/oracle/middleware/wlserver_10.3 as WebLogic Server Location.
In addition to the WebLogic Server, I have installed SOA Suite 11g without problems. The database schemas for that products have been created with the Repository Creation Utility.
I don't know what to do. Any help would be so much appreciated.
Here are some lines of the installation log, where the problem appears:
==============
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Setting valueOf(WL_HOME) to:/opt/oracle/middleware/wlserver_10.3. Value obtained from:USER
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Setting valueOf(WL_HOME) to:/opt/oracle/middleware/wlserver_10.3. Value obtained from:USER
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Inputs passed to the handler: [ WL_HOME ( homeLocation ) = "/opt/oracle/middleware/wlserver_10.3" ]
[2010-10-22T12:44:20.150+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler launch begin: weblogicQueries.isValidWeblogicHome
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Entering method executeHandler
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Fetching the value of homeLocation
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Error:Error in validating Weblogic home location
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Cause:Specified Weblogic home location is not a valid location
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Action:Enter a valid Weblogic home location
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Exiting method executeHandler
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler launch end: weblogicQueries.isValidWeblogicHome
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler returned status: FAILED
==============
It doesn't give much info, just that the path is invalid and the error type.
Any idea?
Thanks in advance.

Oracle Service Bus 10gR3 - Failed to obtain WLS Edit lock

My question is, how do I release this lock?
The gory details follow ...
Oracle Service Bus 10gR3 on Windows 2003 Enterprise.
I am following Tutorial 1. (Sheesh, I can't even get that right!)
Around page 3-28 - "To test the Routing of the Loan Application ManagerLoanReviewService".
Point 1 says to start the server. Without thinking, I did just that.
The problem is, it was already running, otherwise, I would not have been using the sbconsole to do the editing.
Of course, it detected it was already running and didn't start again.
Problem is, after the server shuts down, the command files shutdown PointBase.
So, after a mistaken startup, I ended up with a server with no database underneath it.
Fine, I restarted it.
Now, using the activate session ("sbconsole/sbconsole.portal?_nfpb=true&_windowLabel=ViewChangesPortlet&ViewChangesPortlet_actionOverride=%2Fchangemgmt%2FSessionActivate&_pageLabel=ChangeManagement&ViewChangesPortletactivate=activate")
I cannot activate my session, as it says the following :-
Failed to obtain WLS Edit lock; it is currently held by user weblogic. This indicates that you have either started a WLS change and forgotten to activate it, or another user is performing WLS changes which have yet to be activated. The WLS Edit lock can be released by logging into WLS console and either releasing the lock or activating the pending WLS changes.
I show outstanding sesssions, there is only one.
I switch to that session.
I still cannot activate this session.
I have tried re-starting the AdminServer.
It talks about releasing the lock in the WLS Admin console. Where? How?
Thanks in advance.
...Lyall
PS. I gave up on this and simply blew the whole lot away and started again (returned to post installation and re-started the entire tutorial). However, it would be useful to know how to fix this properly, if ever I end up in the same scenario again.

Although the Undo all changes might work in some cases, it could be the case that some files still remain and are even the AdminServer could not be started.
The lock files are usually located in the domain directories.
For example
Domain demo:
$BEA_HOME/user_projects/domains/demo/edit.lok or $BEA_HOME/user_projects/domains/demo/weblogic_eval.lck
--olaf

Oracle Service Bus 10.3.1 proxy consuming jms (AQJMS)

Hi,
I need to use AQJMS with Oracle Service Bus proxy.
We have an installation with WLS 10.3 and OSB 10.3.1 and another with WLS 10.3.1 where I defined a JMS Foreign Server like appears in the documentation http://download.oracle.com/docs/cd/E12839_01/web.1111/e13738/aq_jms.htm#JMSAD565.
I need support to how to define the URI at the OSB configuration.. jms://server:port/XAQueueConnectionFactory/QueueName... because I tried a lot of ways and can't make it work.
Thank You in Advance...
Juan Pablo

Hi,
Because I want to use the jms protocol... because if I change AQJMS with another JMS Provider the only thing that I must change in OSB is jms://server:port/CF/Q
In SOA Suite 10.1.3.x I use JMS Adapter for this...
Thank You.
JP

Domain Value Mapping in Oracle Service Bus

Hi all,
I am looking for a similar functionality with Oracle Service Bus that exist in the Enterprise Service Bus.
The XPath function is lookup-dvm() that looks up the value based on a domain value mapping.
The case is to use this in a XQuery mapping.
Any input or experience on this?
Thanks,
Knut

Currently out-of-box implement of similar functionality in OSB is not possible. This DVM feature will supplied out of box in future releases of OSB. Talk to your sales representative to get exact date lines for this feature.
Thanks
Manoj

Oracle Service Bus and Financila Message Designer

Hi,
I am new to OSB and FMD so want some good working examples/samples which can explain how to call the FMD cartridge from OSB.

Oracle Service Bus 10gR3 contains the JCA framework which will eventually allow us to exploit the whole set of JCA adapters currently in use in BPEL Process Manager. Over the next few months several JCA adapters will be certified to be used with Oracle Service Bus - the Database adapter is one of the first of these.
As for SOA Suite and WebLogic bundling, let me explain. SOA Suite contains the following products:
BPEL Process Manager
Business Activity Monitoring
Business Rules
Web Services Manager
Complex Event Processing
B2B
ESB (the old Oracle ESB product)
Service Bus (formerly AquaLogic Service Bus from BEA)
This does not come with an application server as the suite is hot-pluggable (i.e. can be used with a number of application servers). However, the preferred (and cheaper) approach is to purchase SOA Suite and WebLogic Suite (which contains iAS, WebLogic Enterprise Edition, Coherence, JRockit with 100ms deterministic garbage collection and WebLogic Operations Control). This is because some of the elements of the SOA Suite only currently run on iAS (B2B) and some only run on WebLogic Server (Oracle Service Bus) although in the future these will also become hot pluggable.
To find out more, check out the SOA Suite and WebLogic Suite pages below:
[SOA Suite|http://www.oracle.com/technologies/soa/soa-suite.html]
[WebLogic Suite|http://www.oracle.com/appserver/weblogic/weblogic-suite.html]
You will find the DataSheets are particularly useful for giving you an overview of the suite.
Hope that helps.
Chris

Oracle service bus and database connectivity

Since currently OSB does not support Adapter Framework, what are currently options for using DB Adapter type functionality in Oracle Service Bus (ALSB).
It seems JMS and other transports are very well supported, but how do we use DB Services?
Please if someone can provide some insight into this.
thanks

Oracle Service Bus 10gR3 contains the JCA framework which will eventually allow us to exploit the whole set of JCA adapters currently in use in BPEL Process Manager. Over the next few months several JCA adapters will be certified to be used with Oracle Service Bus - the Database adapter is one of the first of these.
As for SOA Suite and WebLogic bundling, let me explain. SOA Suite contains the following products:
BPEL Process Manager
Business Activity Monitoring
Business Rules
Web Services Manager
Complex Event Processing
B2B
ESB (the old Oracle ESB product)
Service Bus (formerly AquaLogic Service Bus from BEA)
This does not come with an application server as the suite is hot-pluggable (i.e. can be used with a number of application servers). However, the preferred (and cheaper) approach is to purchase SOA Suite and WebLogic Suite (which contains iAS, WebLogic Enterprise Edition, Coherence, JRockit with 100ms deterministic garbage collection and WebLogic Operations Control). This is because some of the elements of the SOA Suite only currently run on iAS (B2B) and some only run on WebLogic Server (Oracle Service Bus) although in the future these will also become hot pluggable.
To find out more, check out the SOA Suite and WebLogic Suite pages below:
[SOA Suite|http://www.oracle.com/technologies/soa/soa-suite.html]
[WebLogic Suite|http://www.oracle.com/appserver/weblogic/weblogic-suite.html]
You will find the DataSheets are particularly useful for giving you an overview of the suite.
Hope that helps.
Chris

[OSB] Oracle Service Bus: select database DBadapter runtime

Suppose you have 2 databases DB1 and DB2 and both have the SCOTT scheme with the EMP table. The default way to gain access to the databases in the Oracle Service Bus (OSB) is by defining 2 database adapters and defining a business service on each adapter:
- BS1 DBadapter1 DB1.SCOTT.EMP
- BS2 DBadapter2 DB2.SCOTT.EMP
With this setup you can define a proxy service and let the message flow decide which adapter to call.
Now change this configuration a little and suppose you have 25 databases, you can define 25 database adapters and 25 business services, but that involves a lot of repeating work of defining adapters and business services. A more elegant configuration is one business service with one database adapter, and the database connection is set runtime in stead of design time.
PS BS DBadapter DB1.SCOTT.EMP ... DB25.SCOTT.EMP
The challenge is: how do you configure the database adapter runtime (called by an OSB business service).
With kind regards,
Jornica

Oracle Service Bus 10gR3 contains the JCA framework which will eventually allow us to exploit the whole set of JCA adapters currently in use in BPEL Process Manager. Over the next few months several JCA adapters will be certified to be used with Oracle Service Bus - the Database adapter is one of the first of these.
As for SOA Suite and WebLogic bundling, let me explain. SOA Suite contains the following products:
BPEL Process Manager
Business Activity Monitoring
Business Rules
Web Services Manager
Complex Event Processing
B2B
ESB (the old Oracle ESB product)
Service Bus (formerly AquaLogic Service Bus from BEA)
This does not come with an application server as the suite is hot-pluggable (i.e. can be used with a number of application servers). However, the preferred (and cheaper) approach is to purchase SOA Suite and WebLogic Suite (which contains iAS, WebLogic Enterprise Edition, Coherence, JRockit with 100ms deterministic garbage collection and WebLogic Operations Control). This is because some of the elements of the SOA Suite only currently run on iAS (B2B) and some only run on WebLogic Server (Oracle Service Bus) although in the future these will also become hot pluggable.
To find out more, check out the SOA Suite and WebLogic Suite pages below:
[SOA Suite|http://www.oracle.com/technologies/soa/soa-suite.html]
[WebLogic Suite|http://www.oracle.com/appserver/weblogic/weblogic-suite.html]
You will find the DataSheets are particularly useful for giving you an overview of the suite.
Hope that helps.
Chris

Installation of Oracle Service Bus 11g

Hi guys,
I have installed weblogic 11g (10.3.6) and Oracle Enterprise Pack for Eclipse 11.1.1.8 using the file oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32.
Now I was trying to install the Oracle Service Bus 11g 11.1.1.7 and it says:
INST-11502: OEPE version isn't the correct OEPE for this version of OSB. Expected 1.8, found 2.1.1
Enter a valid OEPE home location
I wasn't expecting this compatibility error. I search My Support on I I Doc ID 1944102.1 and it points to http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/oepe-11118-521475.html which seems to be the oepe 11.1.1.8 (the one I have).
Can you help on this compatibility issue please?
thanks in advance.
Regards

Now I cannot run eclipse...
My suggest is because the JVM is 32-bit and this eclipse is for 64bit. If I try to run the other eclipse (the one that came with the 32bit installation), I can open it, but cannot create any osb configuration project.
Error opening eclipse:
Error creating an osb configuration project:
Any suggestions?
Thanks!

Issue with Oracle service bus installation on Windows 7 64 bit machine

Similar Messages

Maybe you are looking for