Issue with oraext:query-database

While executing oraext:query-database('select no,name,mark from vivek_test',false(),false(),'jdbc:eis/DB/EBS') function
i am getting following error
<bpelFault><faultType>0</faultType><subLanguageExecutionFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is ora:doXSLTransformForDoc('xsl/Transformation_2.xsl', $inputVariable.payload). The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: oramds:/deployed-composites/bi/SortTest_rev1.0/xsl/Transformation_2.xsl;lt;Line 18, Column 129>: XML-22044: (Error) Extension function error: Error invoking 'lookupTable':'java.lang.ClassCastException: oracle.tip.adapter.db.DBConnectionFactory'. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary></part><part name="code"><code>XPathExecutionError</code></part></subLanguageExecutionFault></bpelFault>
kindly someone help me to resolve this issue

Hi ervan,
Use the jdbc/datasource instead of eis/DB/EBS.
oraext:query-database('select no,name,mark from vivek_test',false(),false(),' jdbc/datasourceName ')
See if this helps
http://neeraj-soa-tips.blogspot.com/2011/04/getting-xml-output-from-oraextquery.html
Regards,
Neeraj Sehgal

Similar Messages

Issue with the query

Hi Friends,
I am having a problem with this query. The query is to fetch all the elements for the employees. The elements that need to be fetched are set up in the flex sets.
In the table fnd_flex_values there are columns start_date_active and end_date_active fields and these are null. In the below query when I use the condition
and trunc(sysdate) between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and NVL(ffv.end_Date_active,TO_DATE('31-DEC-4712','DD-MON-YYYY'))
the query fetches the results in 5seconds
but when I replace the same query with the statement
and to_date(to_char(ppa.date_earned,'DD-MON-YYYY'),'DD-MON-YYYY') between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and NVL(ffv.end_Date_active,TO_DATE('31-DEC-4712','DD-MON-YYYY'))
the query takes a lot of time. Infact it gets timed out
Columns start_date_active and end_date_active fields are date type. Can anyone say what is the issue with this query
When I give the sysdate instead of ppa.date_earned date
select papf.person_id, papf.full_name, papf.employee_number
,petf.element_name, pivf.name,
prrv.result_value, ppa.date_earned,ppa.effective_date, to_char(ppa.date_earned,'DD-MON-YYYY') date_earned, paaf.assignment_id, petf.effective_start_date
,petf.effective_end_date, ffv.*
from per_all_people_f papf
,per_all_assignments_f paaf
,pay_payroll_actions ppa
,pay_assignment_actions paa
,pay_element_types_f petf
,pay_input_values_f pivf
,pay_run_results prr
,pay_run_result_values prrv
,per_person_type_usages_f pptuf
,per_person_types ppt
,fnd_flex_values ffv
,fnd_flex_value_sets ffvs
where 1=1
and papf.person_id = paaf.person_id
and trunc(ppa.date_earned) between trunc(papf.effective_start_date) and trunc(papf.effective_end_date)
and trunc(ppa.date_earned) between trunc(paaf.effective_start_date) and trunc(paaf.effective_end_date)
and paa.assignment_id = paaf.assignment_id
and paa.action_status='C'
and ppa.payroll_id = 61
--and ppa.consolidation_set_id = 108
and ppa.payroll_action_id = paa.payroll_action_id
and prr.assignment_action_id = paa.assignment_action_id
and prr.element_type_id = petf.element_type_id
-- and trunc(ppa.date_earned) between trunc(petf.effective_start_date) and trunc(petf.effective_end_date)
and trunc(sysdate) between petf.effective_start_date and petf.effective_end_date
and prrv.run_result_id = prr.run_result_id
and prrv.input_value_id = pivf.input_value_id
and     prr.status in ('P','PA')
and pivf.name ='Pay Value'
and ppa.date_earned between pivf.effective_start_date and pivf.effective_end_date
and ppa.time_period_id=145
and paaf.person_id = pptuf.person_id
and pptuf.person_type_id = ppt.person_type_id
and ppt.user_person_type = nvl('Employee',ppt.user_person_type)
and trunc(ppa.date_earned) between pptuf.effective_start_date and pptuf.effective_end_date
and petf.element_name = ffv.flex_value
and ffv.flex_value_set_id = ffvs.flex_value_set_id
and ffv.enabled_flag ='Y'
and ffvs.flex_value_set_name='GROUP_ELEMENTS'
and trunc(sysdate) between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and NVL(ffv.end_Date_active,TO_DATE('31-DEC-4712','DD-MON-YYYY'))
-- and trunc(ppa.effective_date) between nvl(ffv.start_Date_active,trunc(ppa.effective_date)) and NVL(ffv.end_Date_active,trunc(ppa.effective_date))
-- and to_date(to_char(ppa.date_earned,'DD-MON-YYYY'),'DD-MON-YYYY') between NVL(ffv.start_Date_active,TO_DATE('01-JAN-1951','DD-MON-YYYY')) and
order by ffv.parent_flex_value_low, papf.employee_number;
Thanks

ʃʃp wrote:
/* Formatted on 2012/06/11 13:34 (Formatter Plus v4.8.8) */
SELECT DISTINCT fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_ir, no_of_supps_start_ir
           FROM comm_exst_rp_comit_aggr_irview
          WHERE fr_ir_code = 'AS01'
            AND srta_period = 2
            AND srta_year = 2011
            AND param_rep_prd = '2011-2'
            AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 1, 1)
       GROUP BY fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_ir, no_of_supps_start_ir
UNION
SELECT DISTINCT fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_irda AS no_of_links_start_ir,
                no_of_supps_start__irda AS no_of_supps_start_ir
           FROM comm_exst_rp_comit_aggr_irview
          WHERE fr_ir_code = 'AS01'
            AND srta_period = 2
            AND srta_year = 2011
            AND param_rep_prd = '2011-2'
            AND da_status = 'N'
            AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 0, 0)
       GROUP BY fr_ir_code, fr_fc_code1, product1, param_rep_prd, no_of_links_start_irda, no_of_supps_start__irdaYes Union is one of the best solutions for handling two queries.
As per my understanding DECODE function use is:
DECODE (value,<if this value>,<return this value>,
<if this value>,<return this value>,
<otherwise this value>)
But I am little bit jumbled for understanding below two lines in the query..
1)
AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 1, 1)
2)
AND DECODE (:bind_variable, 'All', 1, 0) = DECODE (:bind_variable, 'All', 0, 0)Can you please tell me how the comparision is done using DECODE function?

Issues with Bex query structures and Crystal Reports/Webi

Hi experts,
I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
Budget $
Budget %
Actual $
Actual %
Budget YTD
etc
if I drag the structure into the Crystal Report detail section with a key figure it displays like this
Budget $     <null>
Budget %     <null>
Actual $     300
Actual %     85
Budget YTD     250
the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
Actual $     300
Actual %     85
Budget YTD     250
Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
Business Objects Edge 3.1 SP2
SAP Int Kit SP2
OS: Linux
BW 701 Level 6
Crystal Reports 2008 V1
Thanks
Keith

Hi,
Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
ingo

Transformation not working on result from oraext:query-database() functio

Step 1: Create a project in Jdeveloper (File->New->Project->SOA Project)
Step 2: Select synchronous process
Step 3: Take the default schema for input and output
Step 4: create a schema to hold multiple simple type string values.
Step 5: Import that xsd file in the project wsdl file.
Step6: Create a another variable (var1) referring the above element type (result)
Step7: Drop an assign activity from component palette to the process between Receive and Replay activity
Step 8: In the from section use the function oraext:query-database("select ename from emp",true(),true(),'jdbc/EBS_database').in the to section select the var1 variable.
Step9: Drop another assign activity from component palette to the process before Replay activity and after the first assign activity
Step 10: In from section select the first ename using xpath from var variable and assign to the output variable.
Error: The value is not coming to the output from source(var) variable using xpath or transformation.

See the audit trail on EM and verify why it is not working.
Regards,
Anuj

Issue with Select Query in the Delivery userexit USEREXIT_SAVE_DOCUMENT

Hi All,
I am facing a strang issue with delivery userexit
1) I have a delivery user exit MV50AFZ1 - USEREXIT_SAVE_DOCUMENT.
2) In this user exit. I have written a select query as shown below
*Get the already delivered data
    SELECT vbeln
           vgbel
           vgpos
           erdat
           erzet
           lfimg
      FROM lips
      INTO TABLE t_lips
       FOR ALL ENTRIES IN t_xlips_reference
     WHERE vgbel EQ t_xlips_reference-vgbel
       AND vgpos EQ t_xlips_reference-vgpos.
    IF sy-subrc EQ 0.
    ENDIF.
3) The use of the above select query is to find out if there is any delivery that has already been created for the reference slaes order for which the current delivery is being created.
4) The issue here is that for the FIRST DELIVERY, this select query should fail becuase there is no delivery created earlier and LIPS table would not have data. But, I am seeing some data getting populated in the internal table. The data that I am seeing in the internal table is the data of XLIPS which is nothing but the one that is about to get saved in the database after finishing this userexit.
5) STRANGE Point is that this is working fine in case if I create delivery using the transaction VL01N. But, if I create delivery using VL10A program I am facing this issue.
<< Removed >>
Thanks,
Babu Kilari
Edited by: Rob Burbank on Jun 16, 2010 4:22 PM

Then why don't you add
AND vbeln NE likp-vbeln

Issue with SQL Query with Presentation Variable as Data Source in BI Publisher

Hello All
I have an issue with creating BIP report based on OBIEE reports which is done using direct SQL. There is this one report in OBIEE dashboard, which is written using direct SQL. To create the pixel perfect version of this report, I am creating BIP data model using SQL Query as data source. The physical query that is used to create OBIEE report has several presentation variables in its where clause.
select TILE4,max(APPTS), 'Top Count' from
SELECT c5 as division,nvl(DECODE (C2,0,0,(c1/c2)*100),0) AS APPTS,NTILE (4) OVER ( ORDER BY nvl(DECODE (C2,0,0,(c1/c2)*100),0)) AS TILE4,
c4 as dept,c6 as month FROM
select sum(case when T6736.TYPE = 'ATM' then T7608.COUNT end ) as c1,
     sum(case when T6736.TYPE in ('Call Center', 'LSM') then T7608.CONFIRMED_COUNT end ) as c2,
     T802.NAME_LEVEL_6 as c3,
     T802.NAME_LEVEL_1 as c4,
     T6172.CALENDARMONTHNAMEANDYEAR as c5,
     T6172.CALENDARMONTHNUMBERINYEAR as c6,
     T802.DEPT_CODE as c7
from
     DW_date_DIM T6736 /* z_dim_date */ ,
     DW_MONTH_DIM T6172 /* z_dim_month */ ,
     DW_GEOS_DIM T802 /* z_dim_dept_geo_hierarchy */ ,
     DW_Count_MONTH_AGG T7608 /* z_fact_Count_month_agg */
where ( T802.DEpt_CODE = T7608.DEPT_CODE and T802.NAME_LEVEL_1 = '@{PV_D}{RSD}'
and T802.CALENDARMONTHNAMEANDYEAR = 'July 2013'
and T6172.MONTH_KEY = T7608.MONTH_KEY and T6736.DATE_KEY = T7608.DATE_KEY
and (T6172.CALENDARMONTHNUMBERINYEAR between substr('@{Month_Start}',0,6) and substr('@{Month_END}',8,13))
and (T6736.TYPE in ('Call Center', 'LSM')) )
group by T802.DEPT_CODE, T802.NAME_LEVEL_6, T802.NAME_LEVEL_1, T6172.CALENDARMONTHNAMEANDYEAR, T6172.CALENDARMONTHNUMBERINYEAR
order by c4, c3, c6, c7, c5
))where tile4=3 group by tile4
When I try to view data after creating the data set, I get the following error:
Failed to load XML
XML Parsing Error: mismatched tag. Expected: . Location: http://172.20.17.142:9704/xmlpserver/servlet/xdo Line Number 2, Column 580:
Now when I remove those Presention variables (@{PV1}, @{PV2}) in the query with some hard coded values, it is working fine.
So I know it is the PV that's causing this error.
How can I work around it?
There is no way to create equivalent report without using the direct sql..
Thanks in advance

I have found a solution to this problem after some more investigation. PowerQuery does not support to use SQL statement as source for Teradata (possibly same for other sources as well). This is "by design" according to Microsoft. Hence the problem
is not because different PowerQuery versions as mentioned above. When designing the query in PowerQuery in Excel make sure to use the interface/navigation to create the query/select tables and NOT a SQL statement. The SQL statement as source works fine on
a client machine but not when scheduling it in Power BI in the cloud. I would like to see that the functionality within PowerQuery and Excel should be the same as in Power BI in the cloud. And at least when there is a difference it would be nice with documentation
or more descriptive errors.
//Jonas

Performance issue with insert query !

Hi ,
I am using dbxml-2.4.16, my node-storage container is loaded with a large document ( 54MB xml ).
My document basically contains around 65k records in the same table ( 65k child nodes for one parent node ). I need to insert more records in to my DB, my insert XQuery is consuming a lot of time ( ~23 sec ) to insert one entry through command-line and around 50sec through code.
My container is indexed with "node-attribute-equality-string". The insert query I used:
insert nodes <NS:sampleEntry mySSIAddress='70011' modifier = 'create'><NS:sampleIPZone1Address>AABBCCDD</NS:sampleIPZone1Address><NS:myICMPFlag>1</NS:myICMPFlag><NS:myIngressFilter>1</NS:myIngressFilter><NS:myReadyTimer>4</NS:myReadyTimer><NS:myAPNNetworkID>ggsntest</NS:myAPNNetworkID><NS:myVPLMNFlag>2</NS:myVPLMNFlag><NS:myDAC>100</NS:myDAC><NS:myBcastLLIFlag>2</NS:myBcastLLIFlag><NS:sampleIPZone2Address>00000000</NS:sampleIPZone2Address><NS:sampleIPZone3Address>00000000</NS:sampleIPZone3Address><NS:sampleIPZone4Address>00000000</NS:sampleIPZone4Address><NS:sampleIPZone5Address>00000000</NS:sampleIPZone5Address><NS:sampleIPZone6Address>00000000</NS:sampleIPZone6Address><NS:sampleIPZone7Address>00000000</NS:sampleIPZone7Address></NS:sampleEntry> into doc('dbxml:/n_b_i_f_c_a_z.dbxml/doc_Running-SAMPLE')//NS:NS//NS:sampleTable)
If I modify my query with
into doc('dbxml:/n_b_i_f_c_a_z.dbxml/doc_Running-SAMPLE')//NS:sampleTable/NS:sampleEntry[@mySSIAddress='1']
insted of
into doc('dbxml:/n_b_i_f_c_a_z.dbxml/doc_Running-SAMPLE')//NS:NS//NS:sampleTable)
Time taken reduces only by 8 secs.
I have also tried to use insert "after", "before", "as first", "as last" , but there is no difference in performance.
Is anything wrong with my query, what should be the expected time to insert one record in a DB of 65k records.
Has anybody got any idea regarding this performance issue.
Kindly help me out.
Thanks,
Kapil.

Hi George,
Thanks for your reply.
Here is the info you requested,
dbxml> listIndexes
Index: unique-node-metadata-equality-string for node {http://www.sleepycat.com/2002/dbxml}:name
Index: node-attribute-equality-string for node {}:mySSIAddress
2 indexes found.
dbxml> info
Version: Oracle: Berkeley DB XML 2.4.16: (October 21, 2008)
Berkeley DB 4.6.21: (September 27, 2007)
Default container name: n_b_i_f_c_a_z.dbxml
Type of default container: NodeContainer
Index Nodes: on
Shell and XmlManager state:
Not transactional
Verbose: on
Query context state: LiveValues,Eager
The insery query with update takes ~32 sec ( shown below )
time query "declare namespace foo='MY-SAMPLE';declare namespace NS='NS';insert nodes <NS:sampleEntry mySSIAddress='70000' modifier = 'create' ><NS:sampleIPZone1Address>AABBCCDD</NS:sampleIPZone1Address><NS:myICMPFlag>1</NS:myICMPFlag><NS:myIngressFilter>1</NS:myIngressFilter><NS:myReadyTimer>4</NS:myReadyTimer><NS:myAPNNetworkID>ggsntest</NS:myAPNNetworkID><NS:myVPLMNFlag>2</NS:myVPLMNFlag><NS:myDAC>100</NS:myDAC><NS:myBcastLLIFlag>2</NS:myBcastLLIFlag><NS:sampleIPZone2Address>00000000</NS:sampleIPZone2Address><NS:sampleIPZone3Address>00000000</NS:sampleIPZone3Address><NS:sampleIPZone4Address>00000000</NS:sampleIPZone4Address><NS:sampleIPZone5Address>00000000</NS:sampleIPZone5Address><NS:sampleIPZone6Address>00000000</NS:sampleIPZone6Address><NS:sampleIPZone7Address>00000000</NS:sampleIPZone7Address></NS:sampleEntry> into doc('dbxml:/n_b_i_f_c_a_z.dbxml/doc_Running-SAMPLE')//NS:NS//NS:sampleTable"
Time in seconds for command 'query': 32.5002
and the query without the updation part takes ~14 sec ( shown below )
time query "declare namespace foo='MY-SAMPLE';declare namespace NS='NS'; doc('dbxml:/n_b_i_f_c_a_z.dbxml/doc_Running-SAMPLE')//NS:NS//NS:sampleTable"
Time in seconds for command 'query': 13.7289
The query :
time query "declare namespace foo='MY-SAMPLE';declare namespace NS='NS'; doc('dbxml:/n_b_i_f_c_a_z.dbxml/doc_Running-SAMPLE')//PMB:sampleTable/PMB:sampleEntry[@mySSIAddress='1000']"
Time in seconds for command 'query': 0.005375
is very fast.
The Updation of the document seems to consume much of the time.
Regards,
Kapil.

Issues with Content Query Web Part List Override

I have modified a Content Query web part to show all checked out documents across my site collection. I used this property to get the checked out documents:
<property name="QueryOverride" type="string"><![CDATA[<Where><Geq><FieldRef Name="CheckoutUser" LookupId="TRUE"/><Value Type="int">0</Value></Geq></Where><OrderBy><FieldRef
Name="CheckoutUser"/></OrderBy>]]></property>
It fails when trying to view across the site collection and gives this error:
"There is a problem with the query that this webpart is issuing. Check the configuration of this webpart and try again."
However, it works for sub-sites.
Thus, I followed this blog to modify the ListsOverride property: http://geekswithblogs.net/simonh/archive/2013/05/08/increasing-the-number-of-lists-a-content-query-webpart-can.aspx I modified the property to:
<property name="ListsOverride" type="string"><![CDATA[<Lists Servertemplate="101" MaxListLimit="2000"></Lists>]]></property>
But now I am getting this response:
This query has returned no items. To configure the query for this Web Part, open the tool pane.
Can anyone tell me what the problem is? I cannot find anything in the ULS logs that would indicate a timeout from the SQL server or any other type of error.

Hi Susan,
According to your description, my understanding is that there is something wrong when you override content query web part property.
As you said, the query override works for sub-site, I suggest you check the data in the parent site whether the data is valid.
Here are some detailed articles for your reference:
http://rmanimaran.wordpress.com/2010/10/19/getfind-all-checked-out-documents-from-a-document-library-using-caml/
http://msdn.microsoft.com/en-us/library/office/aa981241(v=office.14).aspx
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Perf tuning issue with a query involving between clause

Hi all,
I am getting issues with performance when I try to execute this query. Given below the query and it is going for a full table scan. I think the problem is with the between clause. But I dont know how to resolve this issue
SELECT psm.member_id
FROM pre_stg_member psm
WHERE psm.map_tran_agn BETWEEN :start_transaction_agn and :end_transaction_agn
and psm.partition_key = :p_partition_key;
Having composite index on map_tran_agn and partition_key.
Please help me in this regard.
Thanks,
Swami

Please consider the following when you post a question.
1. New features keep coming in every oracle version so please provide Your Oracle DB Version to get the best possible answer.
You can use the following query and do a copy past of the output.
select * from v$version 2. This forum has a very good Search Feature. Please use that before posting your question. Because for most of the questions
that are asked the answer is already there.
3. We dont know your DB structure or How your Data is. So you need to let us know. The best way would be to give some sample data like this.
I have the following table called sales
with sales
as
      select 1 sales_id, 1 prod_id, 1001 inv_num, 120 qty from dual
      union all
      select 2 sales_id, 1 prod_id, 1002 inv_num, 25 qty from dual
select *
from sales 4. Rather than telling what you want in words its more easier when you give your expected output.
For example in the above sales table, I want to know the total quantity and number of invoice for each product.
The output should look like this
Prod_id   sum_qty   count_inv
1         145       2 5. When ever you get an error message post the entire error message. With the Error Number, The message and the Line number.
6. Next thing is a very important thing to remember. Please post only well formatted code. Unformatted code is very hard to read.
Your code format gets lost when you post it in the Oracle Forum. So in order to preserve it you need to
use the {noformat}{noformat} tags.
The usage of the tag is like this.
<place your code here>\
7. If you are posting a *Performance Related Question*. Please read
   {thread:id=501834} and {thread:id=863295}.
   Following those guide will be very helpful.
8. Please keep in mind that this is a public forum. Here No question is URGENT.
   So use of words like *URGENT* or *ASAP* (As Soon As Possible) are considered to be rude.

Oracle 6i forms issue with Oracle 9i Database

Hi Friends,
I am having Oracle Forms Developer installed with patchset18.The Version is 6.0.8.27.0
When i connect the forms builder to 9i Database (9.2.0.1) the form builder is getting crashed but i am able to connect the forms builder to e-business suite database(9.2.0.6)
I tried installing 9i Database(9.2.0.1) on windows 2003 server,windows xp,windows 2000.
When i connect my forms builder to any of these databases the forms builder is crashing with don't send message error on (ifbld60.exe).
Is there any compatibility issue between forms builder(6i) and oracle 9i(9.2.0.1).Please suggest me.
Regards,
Arun .N

Forms 6i connects to Oracle 9 databases just fine, even though it is no longer certified by Oracle.
First of all, can you connect to the database with SQL Plus? Make sure that works first.
The other thing that comes to mind is the AL32UTF8 character set. Forms 6i and other older Oracle software cannot connect to databases using it. But I have only seen that problem with Oracle 10g databases, so I am not sure about the Oracle 9 db.
Here is a thread discussing the problem: Re: connecting form 6i to oracle database 10G express edition

Selection Screen pop up issue - with jump query RRI

Hi Experts,
I am facing one issue regarding Jump Query(RRI) functionality.
I have one query and also one drill down query.
I need to jump from the first query to the drill down query.
To achieve this , I have added the first query as sender in RSBBS T-Code and added the drill down query as Receiver.
I have also done the variable assignment from the Assignment Details tab.
Now the Jump functionality is working.
But , whenever I am jumping to the receiver query , The selection screen pop up is appearing.
I don't want this selection screen to appear during jump.
Please help me in this regard.
Thanks,
Biswarup

Hi ,
For testing purpose , I have used a single query as sender as well as receiver query.
So , the characteristics set is same.
The query is a simple query, with only one input variable.
and I have assigned it, from variable assignment.
But still the selection screen pop up is coming , when trying to jump.
Please suggest.
Regards,
Biswarup

Possible Issues with Duplicate Training Database?

Hello everyone!
First off, please forgive my ignorance! I've only been working with databases lightly over the last couple of years, and thus far only with MySQL and MS SQL.
Recently the company I work for purchased a new software package that required Oracle. We purchased a copy of Oracle 10.2 as part of the deal and the company that sold it to us, and set it up for us, has denied us dev access to the database, on our server, because it would expose their underlying data schema. I wasn't in change when the decision was made and we spent the money on a crippled copy of Oracle, but that's in the past.
Because we don't have dev access to Oracle we're unable to create a training database for this new software in house. We have to pay this company to create a test environment for us. I was told it would cost $500, until the tech said he was going to install Oracle on our training server.
At this point I stopped him and said at $500 they'll either be breaching their licensing agreement, or giving us a free copy! The other possibility is that they were going to install this and then just bill us for Oracle later on, despite quoting the job at $500.
The tech who was about to do the installation went to check with someone more senior and then returned to inform me that installing the second copy of Oracle would indeed require more licensing fees.
This verified what I already had told him, and I said we want a training database on our existing Oracle server, and then training copies of the new software can just point to that training database.
He now needs to take time with the more senior technicians while they're "analyzing the existing database server/environment". He was trying to talk me out of installing a training database on the existing server, and instead buying another copy of Oracle, which I believe to be a total cash grab. He had no solid reason why he couldn't do it, but refused to anyway and said he needs to talk to a more senior tech (the same one who said that yes, we'll need to purchase a second copy of Oracle rather than use a second database on the existing server).
So, these two databases, one live data and one a duplicate of that live data used in a training environment where changes won't be reported against, should be able to exist peacefully should they not? The same version of the same software accessing the same data from the same server, just a different database, shouldn't present any problems with my limited knowledge of Oracle! There will only ever be maybe 5 connections to the training environment at a time, and the server should be able to currently handle twice as many users connected as it's current maximum (edit: expected) load.
I know this wouldn't be a problem with MySQL, or MS SQL, and Oracle is a superior database package, so can anyone think of any legitimate reason that might back up the claim that having that duplicate database will be a problem?
Thanks in advance for any guidance here!

Thank you very much John!
We have a per user license and I don't expect our training needs to exceed even a half dozen people at a time to start (A small, significant, fraction of the initial user base). In the future we can easily recommission other resources, or purchase more. The whole project is in the earlier stages anyway, so the needs are smaller now (but the money we spend on licensing could be recurring).
I understand the requirements angle from a server perspective, but those points you brought up drill down into what I need to know a bit more.
I doubt rollback segments would be necessary, I was thinking more along the lines of scheduled replication/duplication of the production database on a weekly or monthly basis, just to keep the material at least somewhat up to date.
I also don't think temporary table space would put much load on storage either, at least in the long run.
RAM isn't much an issue with a 64 bit version running either, for our needs now at least.
My instinct, and what you mention about even potential impact of altering the existing database schema enforces this, is that it's basically safer to create a separate database, but less resource intensive to alter the schema of an existing Oracle database to suit training needs (in this situation, maybe, making some vague assumptions about software probably), if done correctly (although still carrying risks).
I do wish I had the time to read up on this more now, and I will as soon as I have the time.
I probably will download 10g express edition to familiarize myself a bit more now, as soon as I come up with an application for it, to at least try out whatever I read.
Thanks for the advice

Problem in using oraext:query-database() command in xslt

Hi,
I am querying a function through the query-database() command in a certain xslt within a BPEL Process as below:
<xsl:variable name="Corporation">
<xsl:value-of select="string('CORPORATION')"/>
</xsl:variable>
<xsl:variable name="CustAccIdFrmDB">
<xsl:value-of select='orext:query-database(concat("select xx_egytrans_integration.get_xid(",$getCustAccID,",",$Corporation,") from dual"),false(),false(),string("jdbc/otmdatasource"))'/>
</xsl:variable>
But, after deploying the BPEL Process and while running it, I am getting error at run-time.
Below is the error,
<bpelFault><faultType>0</faultType><subLanguageExecutionFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is ora:doXSLTransformForDoc('xsl/Transformation__CustomerUpdate.xsl', $Invoke_getProfileOptions_getProfileOptions_OutputVariable.getProfileOptionsOutputCollection, 'Invoke_CustomerUpdateProc_Customer_UpdateProc_OutputVariable.OutputParameters', $Invoke_CustomerUpdateProc_Customer_UpdateProc_OutputVariable.OutputParameters, 'Invoke_CustAccProc_getCustAccID_OutputVariable_1.OutputParameters', $Invoke_CustAccProc_getCustAccID_OutputVariable_1.OutputParameters, 'Invoke_GetCustTaxExempt_getCustTaxExempStatus__Update_OutputVariable.OutputParameters', $Invoke_GetCustTaxExempt_getCustTaxExempStatus__Update_OutputVariable.OutputParameters, 'Invoke_getCustContactUpd_get_cust_acc_site_contactUpd_OutputVariable.OutputParameters', $Invoke_getCustContactUpd_get_cust_acc_site_contactUpd_OutputVariable.OutputParameters). The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: XML-22900: (Fatal Error) An internal error condition occurred.. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary></part><part name="code"><code>XPathExecutionError</code></part></subLanguageExecutionFault></bpelFault>
Could you please let me know the probable reason for the error? Please help at the earliest.
Thanks,
Promit

Hi Anshul,
Thanks for replying.
The query upon executing in SQL Plus returns proper value. The result is either a concatenated string or 'NO_DATA'.
Please note that: $getCustAccID --> x-path expression and $Corporation --> hardcoded value - 'CORPORATION'.
I have tried formatting the string of the query in various ways, but no luck.. In all cases the error is same.
Waiting for your reply.
Thanks in advance..
Regards,
Promit

Issue with lookup query OIM9.1

Guys,
I am trying to set lookup query for my object form, but its giving me error "Required property not set". I have ran the query in sql client and its working perfectly fine.
Thanks in advance.
Thanks.

Check this: LookupField with Lookup Query
and Re: Lookup Column name
and Re: Conditional forms
and Re: Lookup Queries doesn't work when the source column is a ComboBox
-Bikash
Edited by: Bikash Bagaria on Dec 19, 2012 10:24 AM

Oracle text - issue with contains query

Hello,
Need urgent help.
Following code in my procedure is giving me error.
TYPE c_1 is ref cursor;
result_cursor c1;
i_text2 := 'NEW%';
open result_cursor for
'select /*+ INDEX_SS_DESC(e cad_addr_idx2 )*/
from cad_address
where
contains(text, {:i_text2}, 1) > 0
and rec_type in (1,2,3,4)
order by occur_count desc'
using
i_text2;
ORA-00936: missing expression
ORA-06512: at "AV_OWNER.MY_PROC", line 43
ORA-06512: at line 6
Oracle version is 11.2.0.3.0.
Thanks,

check your table is 'text indexed' on this 'Text' column.To knoow more about 'text index' go to
http://docs.oracle.com/cd/B19306_01/text.102/b14217/ind.htm
Also refer to the below thread where someone had faced issues with CONTAINS clause.
ORA-20000: Oracle Text error: DRG-10599: column is not indexed

Issue with oraext:query-database

Similar Messages

Maybe you are looking for