Issue with paper type when remote printing

Hello
we have an issue with printing from redirected printer
on the local machine Windows 8.1 i have a printer installed and when i try to print from a remote pc to my installed printer on my local pc the paper type is replaced.
on the local printer it was set to letter but on the remote the redirected printer is set to legal.
i try to switch it to letter but it was not kept it switch back to legal.
any adviced will be good ?
Thanks

Hi,
We may try to test this and will get back to you as soon as we get outcome.
In addition, here is a Print/Fax forum below you may get more insights from print experts:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverprint&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Similar Messages

  • Problem with paper selection when web printing on HP Photosmart 209a

    Everytime I try to print a small section of a web page it always wants to print on photo (4x6) paper. I have tried to chage the defualt setting to use the main tray but it keeps going back to the photo paper setting. I'm using FireFox v3.5.6

    Ideas?

  • FI-CA document type when a print document is created

    Hello everybody,
    We have been searching events (e.g. 0061)/user-exit to change the FI-CA document type when a print document (based on our own logic) is created with transaction EASIBI without success. Maybe you have enhanced something in another project. Can you share you experiences?
    Thanks in advance.
    Fernando.

    We have enhanced event R999.

  • Issue with Message Type Triggering during Inbound Delivery Creation

    Hi Experts,
    Hi Experts, 
    Currently we are facing issue with message type triggering during inbound delivery creation:
    In NACE transaction for Inbound delivery we have 3 custom output types:
    Pricing Procedure Used is standard one -> E10001
    Z140  Inbound Delivery Create  (This should get triggered when IB delivery is created)
    Z141  Inbound Delivery Change (This should get triggered when IB Delivery is changed)
    Z142  Inbound Delivery Delete(This should get triggered when IB Delivery is deleted).
    At present if i check delivery in  VL33 -> Extras -> Delivery Output
    Both  Z140 and Z141 are being triggered during IB delivery creation. While it should be only Z140.
    Could you please suggest that are we missing any configuration in SPRO or we need to create any custom routine (requirement) to handle this?
    Thanks

    Hi,
    There is no fine-tuned control for inbound delivery messages as for Purchase order. Hence I guess to meet your above requirement, you have to go for a custom solution similar to the PO fine tune control settings.
    Thanks,

  • Issue with Emoji icons when sent from iOS6 to iOS5

    Issue with Emoji icons when sent from iOS6 to iOS5, all icons appear as a square on the iOS5 message screen.
    Both iOS are the current version and the phones are 4S 64GB
    Anybody got this problem

    Hi!
    What kind of RFC do you use? If you use synchronous RFC the caller waits for the answer/result of the called function. In normal cases this should solve your issue.
    Regards,
    Volker

  • Hi BC, I have an issue with BC. When the shopping cart is used it takes stock out of inventory and h

    Hi BC,
    I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
    To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
    Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
    This is causing us mayhem.
    We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
    Jo

    Hi there,
    The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
    What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish.

  • Does SAP or Oracle have an issue with these type of processors?

    Does SAP or Oracle have an issue with these type of processors?
    Intel Xeon X5260 & E5450    vs    Intel Itanium       PROCESSORS
    I want a Sales / Marketing URL link or white papers that talks about processor recommendations.
    SAP GUI  7.20

    > Does SAP or Oracle have an issue with these type of processors?
    >
    > Intel Xeon X5260 & E5450    vs    Intel Itanium       PROCESSORS
    >
    > I want a Sales / Marketing URL link or white papers that talks about processor recommendations.
    SAP does neither "recommend" nor "deny" any processors.
    If you check http://service.sap.com/benchmarks then you get a lot of machines with different CPUs/operating ssytems and database combinations.
    Choose the one that suits best for you.
    Markus

  • Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N)

    Hello experts,
    For this thread, please check the following link:
    [Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
    Thanks and Regards,
    Daniel.

    Hi Experts,
    The question has been answered as per the following "link":
    [Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
    Daniel

  • I  have an issue with speaker/microphone. when i call or i  recive a call the person on the other side can not hear me.

    i  have an issue with speaker/microphone. when i call or i  recive a call the person on the other side can not hear me.

    Hello aalapdesai112,
    Lets see if we can get you back to taking calls normally again. Start your troubleshooting with the article below and go through checking to making sure that you are up to date with your iOS as well as a simple restart on your iPhone. 
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    http://support.apple.com/en-us/HT203792
    Regards,
    -Norm G. 

  • How do I select paper type when printing from Photoshop?

    Sorry to be a total technotard, but in the olden days, I could select paper type (e.g. glossy photo) from the print menu when printing from Photoshop.  Now there is no way to select paper type, at least not that I can find.  Is this an Adobe thing?  Cuz I can't figure out how to do it from InDesign either.  I'd like to be able contol image quality as well.  Thanks in advance for any help... I'm wading around in all these forums trying to find a simple answer and am having no luck...
    ~Aeron Mack
    [email protected]

    "hp website says the driver is built-in to the new macs, and I don't need to d/l a new one"
    First of all, this is a crock.  And a very tiresome one, as it's been used as an excuse not to post drivers for download.
    The driver is not "built into" a Mac.  There may be some version of it installed IF you happened to install hundreds upon hundreds of gigabytes of printer drivers (the vast majority of which are obsolete and brands you've never nor will ever own) when you installed the OS.  This view is just so idiotic, as you won't have installed every HP driver ever made if you didn't own an HP printer or plan to hook it up to that computer.
    Apple compounds the problem by not giving you any way to pick and install a printer driver.  Seriously, in 2009.  And this in addition to the Mac's inability to detect a new printer after you plug it in, and ask if you want to install a driver.  People tolerate that while making fun of Windows, which has been detecting new hardware and prompting for drivers since what, 1995?
    Anyway, I believe it was HP who complained that they "didn't have room on their servers" to offer drivers for download.  Unfrigginbelievable.
    Nobody who pays any attention to their printing should even consider an HP printer.  That's how incompetent their drivers are, for both platforms.
    Sad.

  • Choosing the paper type when Printing to Canon S9000

    How do I choose the paper-type setting from the print options menu?
    The Canon OS X manual speaks about a pull down menu which allows for selection of "quality and media."
    I am finding options for printer choice, rendering, layout, print image etc, but nothing that allows me to choice glossy photo paper vs. matte, et al.
    I have also downloaded a canon software update without noticeable difference.
    Am I missing something obvious here?
    Thanks.

    Thanks for your response. I am accessing the print menu and subsequent options, but what I see is a window in which the correct printer is selected then below it is a section for choosing layout, then one for margins, rendering, image adjustments, image options. Everything but quality and media.
    If I futz around in I Photo I do see a limited paper choice option from a pull down, so I assume I am still missing something in Aperture itself.
    Thanks.

  • Sudden banding issue with Mac and new Canon printer, already called tech

    Good morning fellow Elementites.
    I have been using Photoshop Elements 12 on my MacBook Pro 13 inch, running Maverick OS, printing to HP Photosmart Premium all-in one with no banding issues, ever.
    I did want to upgrade my printer and monitor so I purchased the Canon Pixma Pro 100 and a new external LG IPS monitor to view the PSE program.
    I also purchased ColorMunki Display to calibrate the monitor. Everything is operational with the recommended settings for color etc.
    I printed a .tiff image and a .jpg through the PSE print function. The images that looked perfect on the new monitor and Macbook monitor printed with banding. I called Canon tech support. The man had me perform a few tasks to make sure the printer was operating correctly. We printed test sheets from the printer and they were all as they should be.
    He the said he NEVER prints from PSE. He edits in PSE but prints using Canon's EZ share or print or whatever it's called, doesn't matter cause I do NOT LIKE IT AT ALL. Not to mention it is just another step in the work flow. Not to mention that I paid good money for a photo editing program of high quality and I want to use ALL the features.
    He said the problem isn't the printer but the printing software instructions TO the printer via the Mac OS printer system, or something like this is what he said. He also had me download some other updates and driver files. He then had me remove the printer from my printer list and then add it back.
    He then had me print the .jpg image, (it only prints .jpg which is annoying as heck,) and it came out SO BEAUTIFUL I ALMOST CRIED
    I want to print this quality THROUGH PSE. Does anyone have a clue as to what to do to resolve the issue?  None of the suggestions in other threads from the past seem appropriate enough.
    Eager to hear,
    Regards.

    I have returned home and have copied down all the settings so that I may post them here before I do any more fiddling.  Maybe something glaring will be spotted before I start changing things.
    I opened an image in PSE 12.
    I chose from the PSE menu at the top of the monitor, FILE >PRINT
    A window appears with my photo and boxes and such: 1. Select Printer> CANON PRO 100-SERIES (The other printer isn't concern now).
    Select Paper Size and Orientation, no problems with this or any of the other settings in this window.
    I then select MORE OPTIONS button at bottom of window.
    Another window opens.
    There are 3 options listed on the left hand side PRINTING CHOICES which it is automatically on, CUSTOM PRINT SIZE which I haven't needed yet, and COLOR MANAGEMENT.
    I select COLOR MANAGEMENT.
    COLOR HANDLING is set to PRINTER MANAGES COLOR.
    IMAGE SPACE is listed, not in any box, as sRGB IEC61966-2.1
    PRINTER PROFILE is listed in a box that is grayed out and not selectable, as CANON IJ COLOR PRINTE...
    RENDERING INTENT is set in a selectable box as RELATIVE COLORMETRIC.
    (There is a little mssg below all this that reminds me to remember to enable color management in the printer preferences dialog.  I was never able to find this action and after doing some research I read that this mssg is a boo boo as the function is automatic in MAC running Maverick, supposedly).
    I then click OK and the box goes away.
    I then click the PAGE SET UP button.
    A window titled PRINT opens.
    The Printer selection box says CANON PRO=100 series.
    The next box always confuses me because nothing in the list appears to pertain to me when I want to print my photos.  It is the Presets box.
    I believe FAST PRINTING ON PLAIN PAPER is always showing when I open this window.  But I don't want that so I always look to see if there is something I should choose that applies.  I don't know what they mean by DEFAULT SETTINGS in this case.  LAST USED SETTINGS would be ok if that was what I wanted each time I printed.  FAST and FINE on Plain Paper?  I have been assuming they mean plain copy paper so I don't choose that.  SAVE CURRENT SETTINGS AS PRESET, I don't choose that because I haven't been sure of the settings.  And the SHOW PRESETS does me no good becuase you can't change anything in there.
    PAPER SIZE, not an issue at the moment.
    LAYOUT button is my next stop, by now I am exhausted
    I look at COLOR MATCHING which shows CANON COLOR MATCHING as the selected method.  (The other choice is COLOR SYNC but I don't know anything about that one and haven't been told to change it.)
    PAPER HANDLING & COVER PAGE, N/A at this time.
    QUALITY & MEDIUM.  I choose my paper type, paper source, print quality which for my photos I select HIGH.  I don't touch COLOR OPTIONS because that is scary looking.  And BORDER and MARGIN I have no issue with.
    I then hit SAVE and the window closes.
    Then I select PRINT in the lower right of the window that has my photo in it and from which I acessed all these other things.
    Phew.  So, can anyone tell me if they see anything wrong here, PLEASE.
    Regards,
    P.

  • Overprint issue with white type.

    We have been creating Digital PDF successfully for over 10 years. This is a problem that comes along once in a great blue moon.
    Please read complete text before forming an opinion or answering the questions. The focus of these questions are on Digital AD's from outside vendors/customers.
    We create our publications using Quark 6.5 on Windows XP
    (We are locked into this version because of some other proprietary software tied into Quark, so upgrading Quark is not an option for us).
    We compose a page of some type, some MAC EPS Illustrator 5.1  files and at least one Digital AD (PDF's which are  from our advertisers/customer that we pre-flight) on to the page.
    Print the page to a postscript file, distill postscript file with Acrobat Distiller Ver. 7 on PC's into a PDF file with Crops and Registration Marks.
    We got a PDF (Digital AD) from a customer that was created in InDesign CS6 on a Mac. There is some white type in the AD ( See Photo Below)
    The Last "E" in Engineered is selected in each screen shot.
    The Top one is the AD untouched before Pre-flighting it. The White Type "E" letter is set to knock out and is still type (not converted to outlines).
    (Pitstop is showing this in the dialog box on the right)
    In the Bottom screen shot the type has been converted to outlines and is set to overprint.
    First problem is white type should never overprint. Unless you specifically set it to in the original program.
    This type was originally set to knockout and then when it was distilled from a Postscript file from Quark into a PDF with "Preserve Overprint Settings" check in (Distiller Settings) the type is converted to outlines and the type was set to overprint.
    (If I turn off "Preserve Overprint Settings" and re-distill the postscript file the type doesn't convert to outlines or change to overprint.... it remains a knockout.)
    Second Problem is catching this while using preflight tools. I have Pitstop tools to show Overprinting and Acrobat has a Output Preview/Color Warnings/Show Overprinting feature too.
    Using Pitstops Overprint does show it in the inspector window, but not a Pitstop report.
    Acrobat's Show Overprinting does NOT show that the type has been set to overprint.
    So our workflow now is to flag any white type and check it throughout the whole pre-press process to make sure the type holds the knockout function.
    Below is a scan of how the type ran when it was printed on sheet feed printing press paper.
    Talk about overprinting... this is not what it looked like in the above pictures.
    I am aware of this problem from Illustrator. It's an order of operations when dealing with white type.
    If you set type, change the color  to something other than 100% black and then convert it to outlines... it will knockout.
    If you set type, convert to outlines and THEN change the color from black to white, it will hold the overprint from being black type.
    It doesn't always do this every time, but it does happen enough that I have to double and triple check my white type.
    Questions:
    Does anyone have this problem in their workflow (White Type Overprinting) and do you have a solution to better catch this when you have to process 50+ AD's each week?
    Obviously anything with white type will be looked at much closer now that this AD got through. It would be nice if these settings would hold through the whole preflight to printed piece process.
    Any Words of Wisdom would be appreciated too.

    You can set Pitstop up to catch this and even fix it.
    In the preflight profile, under 'Text', select 'White Text' and add it to the list of checks, you can also enable the fix as well so it's just resolved.
    I'm using PitStop 11 update 2, but it's in earlier versions as well.
    If you need futher information you can always drop me a mail. I am the Product Manager for PitStop, [email protected]

  • Issue with instant ringback when using sip trunk to SP

    Hi all,
    We use CUCM 8.0.2.
    We have a SIP trunk to a SP connected via one of our Cisco 2911 routers configured as a CUBE.
    Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, RELEASE SOFTWARE (fc2)
    c2900-universalk9-mz.SPA.150-1.M3.bin
    Cisco CISCO2911/K9 (revision 1.0)
    Technology Package License Information for Module:'c2900'
    Technology Technology-package
                      Current       Type
    ipbase        ipbasek9      Permanent
    security      securityk9    Permanent
    uc              uck9            Permanent
    data           None            None
    We also have several ISDN lines that run out via various Cisco routers configured as H323 gateways.
    We use 7945 and CIPC for our phones.
    We're having an issue with calls going via the SIP trunk where we hear ringing instantly after dialling - but before the actual device at the other end starts ringing (considerable difference).
    Using the SIP trunk: If I make a call to my mobile phone - I hear ringing instantly - about 3 rings before my mobile phone actually starts ringing - undesireable.
    Using H323 gateway: If I make a call to my mobile phone - I hear silence for a bit - then ringing when the mobile starts ringing - desired.
    Using SIP trunk: If I make a call to a landline that is ready - it rings instantly for at least 1 ring - before the actual phone I'm calling starts ringing - undesireable.
    Using H323 gateway: There is a momentary pause before hearing ringing on my phone and the phone I dialled - desired.
    Using SIP trunk: If I make a call to a landline that is off-hook (with no call-waiting/etc.) - it rings once and then returns the busy signal (the worst issue) - undesireable.
    Using H323 gateway: There is a momentary pause before hearing busy signal - desired.
    Phone to phone internally (same network): Operates as expected (instantly rings locally and on the phone I'm calling). Between phones that utilise the SIP trunk and phones that utilise the H323 gateways within the same network - communication is instant and as expected.
    Any ideas why this happens and how to stop it?
    I want it to not ring until the situation is known and that it can provide the appropriate feedback (ringing/busy/etc.).
    Some possibly relevant config (note that there is a known bug with this IOS that meant I had to declare the codec in each dial-peer as the voice class would not work):
    voice service voip
    address-hiding
    mode border-element
    allow-connections sip to sip
    sip
      bind control source-interface GigabitEthernet0/0
      bind media source-interface GigabitEthernet0/0
      header-passing error-passthru
      early-offer forced
      midcall-signaling passthru
    interface GigabitEthernet0/0
    ip address x.x.x.x 255.255.255.252
    ip access-group acl.SIP-IN in
    no ip redirects
    no ip unreachables
    ip verify unicast reverse-path
    ip virtual-reassembly
    duplex full
    speed 100
    no cdp enable
    gateway
    timer receive-rtp 1200
    sip-ua
    connection-reuse
    gatekeeper
    shutdown
    dial-peer voice 1 voip
    description *** INBOUND CALLS FROM CARRIER ***
    translation-profile incoming SIPTRUNK-INCOMING
    session protocol sipv2
    incoming called-number #blah blah#
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    dial-peer voice 61 voip
    description **** WA, SA AND NT NUMBERS ****
    destination-pattern 0[8]........
    session protocol sipv2
    session target ipv4:<MY SP's SIP SERVER>
    incoming called-number 0[8]........
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    dial-peer voice 81 voip
    description **** MOBILE NUMBERS ****
    destination-pattern 0[4]........
    session protocol sipv2
    session target ipv4:<MY SP's SIP SERVER>
    incoming called-number 0[4]........
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    dial-peer voice 500 voip
    description *** INBOUND SIP TRUNK TO CUCM PUB ***
    translation-profile outgoing SIPTRUNK-CALLING-ADD-0
    preference 1
    destination-pattern 5[12]..
    session protocol sipv2
    session target ipv4:<OUR CUCM PUBLISHER IP>
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    Any help or a point in the right direction would be greatly appreciated.
    Cheers,
    Brett

    I ended up resolving this issue as follows:
    In CUCM, under Device > Device Settings > SIP Profile.
    I modifed the profile relevant to my SIP trunk, under the "Trunk Specific Configuration", I set "SIP Rel1XX Options" from "Disabled" to "Send PRACK if 1xx Contains SDP".
    Now, I get the expected delay before hearing ringback.
    Solved!

  • I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

    I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

    Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
    http://www.digitalrebellion.com
    Try deleting your render files and re-rendering the project.
    Start with these and let us know how you go.
    Tony

Maybe you are looking for

  • Indesign & PDF printing problems

    Hello! I have a paper to be printed out on a Laser Printer (600-1200) It is a black and white document. The problem is that the results are very different, when you print directly from Indesign CS3, (which is the Indesign Document), & PDF. The simple

  • MD07 and new exception messages

    Hello, Is it possible to add the new exception messages in MD07 transaction (e.g. ND type materials). Idea is to sort the materials with new sales order created. As of now I can sort materials below the safty stock and few others. I have found FM MD_

  • How can I get true 5.1 surround sound from my iMac?

    I am looking to buy a logitech z506 5.1 speaker system but it only take 6 channel input, I know my iMac doesnt support that out of the box. I am looking for a solution that I can do to so I can get true 5.1 surround sound. Please help Thanks, Amar

  • How to control volume in Netstream

    Hello, I had a previous post but received no answer after a while.  I have a project in actionscript 2.0 using flash cs4.  It is a flash game.  I have the flv files loaded from my site using NetStream. Some of the videos volume is lower and I would l

  • Talent Management successor pool reporting in BI 7.05?

    Weu2019ve implemented Talent Management with EHP5 and are now working to implement BW reporting for Talent Management (PA-TM) with BI content 7.05. We have not implemented Nakisa. For Succession planning, within the data source 0PA_TMC_2, it appears