Issue with PC not booting when PCIe 8360 attached to controller PXI 8360

I am using a PCIe 8360 in our Windows 7 PC and connecting it to a PXI 8360 controller in a Pickering chassis. When I connect the mxi card to the controller and try starting the PC, the PC will not boot. Has anyone seen this issue and if so, what is the problem/solution?

It sounds like this may be an issue with BIOS compatibility. I have included some more information below. I would recommend upgrading the BIOS to the latest version and seeing if that resolves the issue.
http://pcsupport.about.com/od/fixtheproblem/ht/accessbios.htm
R. Brill
Applications Engineer
National Instruments

Similar Messages

System does not boot when PCIe express Card is inserted in system. Using Spartan-6 PCIe Integrated Endpoint Block 1.3

Hi,
I am using Spartan-6 PCIe Endpoint Block core v1.3 and I am using ISE 12.1. I have used the PIO example design,
modified it according to our design.
The core is configured as below:
BAR0 - 8KB, 32-bit, Memory Type
Lanes - x1
Clock - 125 MHz (system clock)
The card is a custom board. When the card is pluged into the system the system does not boots, it hangs.
I have tried debugging using chipscope and monitored trn_lnk_up_n, trn_reset_n and trn_clk. trn_lnk_up_n stays
high (deasserted), trn_reset_n stays low (asserted), trn_clk is low (No clk).
What might be the issue?
Thanks & Regards.

Thanks Gabor, for the response.
I refered couple of answer records like AR# 34873 and AR# 34894, I monitored trn_reset_n, sys_reset_n, clock_locked, PLLLKDET and RESETDONE signals as suggested in AR# 34894.
Status as follows:
SYS_RESET_N = 1 (deasserted)
TRN_RESET_N = 0 (asserted)
CLOCK_LOCKED = 0 (deasserted)
PLLLKDET = 0 (deasserted)
RESETDONE = 0 (deasserted)
which means the transceiver PLL frequency is not within the predetermined tolerance. Is this problem related to the PCIe Jitter Attenuator I am using on the board to derive 125MHz from 100MHz system Clock.
Thanks & Regards

Issue with Reminders not working when setting it to arrive or leave a location in iOS7.

Hi all,
Tried everything: Called support and reset All setting. Made sure all "location settings" are set. Restored via iTunes as a new phone, checked all setting again, set a reminder to remind me to get gas when I leave my home, and it never reminded me. Also, doesn't remind when I arrive at a location. I have tried this with my wifes phone (iPhone 5) and my daughters (iPhone 4) all running iOS7 and it doesn't work. I never had this issue with iOS6. All other locations services like GPS, maps, & weather working fine. I strongly believe it's a iOS7 bug. Has anyone else experianced this issue?

In case you haven't seen this thread:
https://discussions.apple.com/thread/5329723
Jump to page 5. There is a solution by ben812 that initially worked for me, but after restarting my phone I was back to square one.
I visited the local Genius Bar, and they claim they have not heard of this problem. Whether that is true or not, they know now. One of the employees confirmed that WiFi would need to be on, as the location service checks it first (before using GPS). Seems like a bug, but for now having WiFi on and leaving Reminders running in the background seems to solve the issue.
I hope Cupertino addresses this in an upcoming iOS release.

RD430 will not boot when PCI card is added

I'm having an issue where my RD430 server will hang if I try to install a graphics card. My BIOS is up to date, using v2.12
I purchased an NVIDIA Quadro K2000 card. I attach it to one of the risers, connect my monitor to the NVIDIA card, and turn the server on.
Immediately before displaying the "American Megatrends" BIOS screen, the server beeps twice, the beeps are about one second apart from each other. The options F1 for set-up, F12 for Boot Menu are displayed, but they do not function. If I press F1 or F12 nothing happens. After about 20 seconds, the server beeps again but the screen does not change. Another 20 seconds, another beep. This happens a third time after another 20 seconds. After this the screen then goes black, and a blinking white cursor is up in the top left corner of the screen. Nothing happens after this point (I've waited hours.)
I turn off the server and I remove the NVIDIA card. I connect the monitor back to the on-board VGA port. I turn on the server and it operates normally. The OS boots, and I can also get into the Boot Menu and BIOS by pressing F1 or F12 when the American Megatrends screen is displayed.
I installed the NVIDIA card into a desktop computer to make sure it was operational, and the card worked perfectly.
Any idea what I should try? I checked the boot order in the BIOS and did not see anything wrong.

Update the bios... I had the same troubles and explain some about it in this thread.

Having issue with safari not starting when I open it. I am having this issue with iOS 7 on both a iPhone 4S and 5.

Have successfully updated 2 items and Safari the last both are having issues. Safari opens but then stalls. I have reset and restored the iPhone and I am seeing the same issues.

I just tested this on my wife's phone and you are right. I tested it time and again, changing the vibrate to ON and OFF and it consistently reproduces the problem, in line with the vibrate being on or off. You are a genius lol.
I had this issue on my phone too, but it disappeared when I followed the advice of a Genius.
When I asked my local Genius, he said it was a software issue and that a Restore followed by Create a new iPhone would remove the faulty/corrupted file that is causing the issue. He specified not to restore from backup, as the problem might still be resident within the backup.
I did this, and it seemed to work on her phone. Then it reappeared, so I'm still not sure what's going on. But your discovery defnitely holds true for her phone. My one seems to be okay regardless of the vibrate on or off now, even though I did exactly the same restore procedure on mine.

Issue with events not propagating when selecting toolbar items

Hey All,
I'm on OS X Lion using CS6 beta and observing events in Photoshop form an outside application using Cocoa's NSEvent#addGlobalMonitorForEventsMatchingMask.
It seems Photoshop is stoping the propogation of some events coming out of selection of toolbar items. Here's the issue:
There are two ways to select the Pencil tool from the toolbar. (Method A) I can click the Paintbrush, holding down for a second and releasing, then mouse move to the Pencil and click, OR (Method B) I can mouse down the on the Paintbrush and drag the mouse to the Pencil.
If I use Method A I get what seems to be every event associated with the interaction, BUT If I use Method B Photoshop seems to stop the propogation of a lot of drag events.
Are there any experts out there that have an knowledge of why this is, or if there are any known work arounds?
Regards,
Ned
ps This is also an isue in Photoshop 5

Ned, this is a bit over my head, but FYI (and your troubleshooting research), there are other methods to get alternate tools: ALT+click to cycle them, CMD/right-click to get the flyout, and Shift+Tool shortcut (unless you changed the setting in preferences)
BTW, method B is not the same as A? The only difference is that in A, there is a release, then a move to target area, then another click, while in B, we have a hold, then a move to the target area, then release.

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
 Cheers, Tom

How do I fix issue with computer not authorized yet when authorized it indicated already authorized?

How do I fix issue with computer not authorized yet when I go to I-Tunes to authorized it indicated already authorized?

I updated to iOS 5.0.1 days ago and didn't receive that notification until just now...
This time I synced new photos I took yesterday, and it gave me the:
"iTunes Sync: 54 items could not be synced. See iTunes for more information"
Perhaps it kicks off when new items get synced.
I've decided to rent a movie yesterday. Once it gets deleted, I'm curious to see if it jumps to 55 items.

Issue with 2wire dsl router when connecting power pc g4 via ethernet

Issue with 2wire dsl router when connecting power pc g4 via ethernet. The 2wire will keep resetting. When I connect my macbook pro via ethernet to the 2wire all is ok, but as soon as i connect the power pc. . . .reset. I have emailed 2wire support. They recommended using a different patch cable. Tried that.. .. anyone else having this issue???? Any help would be appreciated. . .

Search the discussions for issues with 2wire dsl routers. This has come up before in a discussion I've been involved with, but probably not to do with the MDD. I do remember it being a design issue with the router, something that was done to it before dispatch.
Let us know if you can't find it and we'll have a look.
If you afford it, bin the 2wire and go buy something decent like a Netgear.

Notebook HP Probook 6560b not booting when my book essential is plugged in.

Dear sirs,
My laptop will not boot when the my book essential is plugged in.
The facts
MY book essential 3.0 TB
HP Probook 6560B
My book works well, is installed in windows and works perfect.
Drivers are up to date.
However when i want to boot my pc the system freezes.Doesnt do anything not even the bios menu.
When i unplug the my book it resumes the boot.
I did the following things to solve the problems.
Changed bios boot order in to primary hardisk first.
Disabled booting for USB.
USB legacy option is diabled in bios menu.
I have contacted Western Digital but they say i have to change something in windows but don't know what exact.
I am really out of options and do no what to do, can you please help.
Yours sincereley,
Gerben Tierie

Hello Gerben,
Your ProBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

210-4125 will not boot when windows 7 x64 is installed

i have posted this problem a while ago "210-4125 will not boot when windows 7 x64 is installed"
hoping that some one new might have had the same problem
HP.......................................HP MINI PC 210-4125
model ................................210-4125
Bios ...................................F08
ser no................................ [edited Serial Number by Moderator]
product no.........................A8V56EA#ABU
Ram ..................................4.0 GB
system board ID............... 338d
processor .........................Atom(TM) CPU N2800 1.86GHz
Product configuration ID..0797200000204600000300100
acording to INTEL the cpu is X64 bit, but the bios will not let a X64 boot up only a x32 bit ?
and i get a message on black screen "you are trying to load an opperating system not compatable" or some thing like that
it would seem that the bios is the problem and not the CPU ? the 08 bios update only covers x32 bit and not x64
if any one out there is running x64 bit windows 7 on the 210-400 range of netbook can you tel me
1. model no
2.CPU
3.Ram installed
4 bios No
thank you
JB

thank you George
i will bear that in mind next time
i see that you work for HP ? do you have any suggestion's for my problem ?
as i mentioned before the notebook works faultlessly when X64 windows 7 is installed via the OEM disk in the external DVD drive , but if i disconnect the DVD drive it will not boot, but gets stuck in boot loop , then if i connect the drive with any windows installation disc loaded in it , it loads perfect and works perfect even if i disconnect when loaded , but i can not keep the drive connected ?
i have tried to use a USB flash drive to install X64 windows 7 but it comes back that the present CPU is not compatible ??
when it clearly states on Intel web site that it is and it works perfect when loaded ?? even the Windows update manager confirms that it will run all X64 windows OS
i understand the the bios "InsydeH20" is a very difficult bios to work with, and that Insyde have blocked the "hidden menu" via software ? i have exhausted all the software functions to open the complete bios that i can find at the moment , i think it is locked out from out side the bios and not from inside.?
any pointers in the right direction would be very helpful ,
many thanks
John

My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. Any tips?

My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. I tried restarting it a few times, nothing worked. I looked up many tutorials, and still nothing did the trick. Any tips?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

W520 will not boot when docked; blue screen

W520 fails to boot 100% of the time when docked. Blue screen shows SYSTEM_SERVICE_EXCEPTION, STOP x0000003B for nvlddmkm.sys
nvlddmkm.sys is the NVIDIA driver, which is version 8.17.12.9620, the latest shown on the NVIDIA and Lenovo websites. BIOS is also the latest.
Systems boots fine if I remove it from the dock, but it will not boot when docked.
Windows 7 PRO SP1
2 external monitors via DVI
Any suggestions?

Boot with Option held down. After the cursor changes to an arrow, Command-. (Command Period) should open and close the optical drive. After you insert the disc, click the curved arrow to have it re-scan the discs for boot volumes. Then select the optical drive and click the straight right-pointing arrow to start.
Try it with the Apple Hardware Test disc first and run Extended Tests.

Issue with PC not booting when PCIe 8360 attached to controller PXI 8360

Similar Messages

Maybe you are looking for