Issue with Performance Point Filters and SSRS when visibility is toggled

I have a SSRS report that has the visibility toggled with the (+/-) sign. The report is SQL Server 2008 R2 / SharePoint Integrated in a SharePoint 2010 Site. The reports datasource is an Analysis Services database.
I am displaying the report in a Performance Point Dashboard and am connecting it to Performance Point filters using the member unique name. The report filters correctly when the dashboard filters change. However, when I click to expand a plus sign to toggle
the visibility, the report goes back to it's default filters of '[Dimension].[All]' and all data is returned, and the visibility is not expanded.
I have confirmed that the report visibility toggling works in BIDS and via the report that is stored in SharePoint. I have also confirmed that it works when the report is stored in the native mode report server, and integrated with Performance
Point in the same manner.
So, I 'think' I have whittled the problem down to be the combination of SharePoint Integrated and Performance Point.
Anyone have any ideas?
Jewels

Hi,
I am having a similar issue with PerformancePoint SSRS and visibility togle. Were you able to figure this out?
I have a report which calls a sub report. When I click on the report it passes parameters to sub report which works fine. But as soon as I click the visibility toggle, it goes back to default. Strange thing is that it works in PerformancePoint as a 
stand alone report (sub report alone in PP). Just when it is a sub report and parameters are passed through url this issue happens.
Any suggestions are welcome. I have spent hours trying to figure this one out.

Similar Messages

  • Issues with performance and RAM previews

    Just did a major system upgrade from an iMac to a Mac Pro, and now I'm having an issue with performance...specifically with RAM previews.
    When I try to do a RAM preview with audio, it grinds my entire OS to a hault (can't switch apps, or click on much of anything). It eventually clears up enough for me to stop the RAM preview.
    So, I'm wondering if maybe my Memory & Multiprocessing settings might be off.
    Here are my system specs:
    Mac Pro
    2 x 2.4GHz 6-Core Intel Xeon (12 cores)
    64GB RAM
    ATI Radeon HD 5870
    AE CS6 (11.0.2.11)
    AE is installed on an SSD drive and the scratch disk is an internal HDD.
    Here are my AE Memory Settings:
    Here's my GPU Info:
    Let me know if any other info is needed...   

    You are reserving far too little RAM for other software.
    See this: "Performance tip: Don't starve your software of RAM."
    (Also, I recommend going through all of these materials: http://forums.adobe.com/thread/543440 )
    Regarding the SSD: Putting your application files on it means that applications load/boot faster. This is fine, but that benefit is just when you first start the application. If you put your cache files on it, then you get the benefit every time that something is read from or written to the cache---i.e., many times per second, for the entire time that you're working. Put your cache files on your SSD. BTW, there's no reason to not put your application files and caches on the same SSD. The reason that you split things across multiple disks is to prevent simultaneous reads and writes to and from a slow disk; the program loading from disk happens at a different time than reading and writing cache files, so there is no potential for conflict and slowdown.

  • I am trying to animate a file in photoshop with vanishing point. And when I "Return 3D layer to photoshop", I'll get a cube with dimensions. It´s not what I can see in tutorials, aperfect 3D space. Using win7.

    I am trying to animate a file in photoshop with vanishing point. And when I "Return 3D layer to photoshop", I'll get a cube with dimensions. It´s not what I can see in tutorials, a perfect 3D space. Using win7.

    An update -
    The libraries appear to all be in tact, now.
    The error I am getting,
    Parms are; 800/S80/5069660
    ERROR -  detected an exception: Unexpected database connector error
    is a connection issue.
    Any ideas??

  • Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

    Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

    I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • Next and previous button issue with Prettyphoto in filtered gallery

    Hi there,
    I'm stryggeling with a next and previous button issue with Prettyphoto in filtered gallery.
    Like to have it like this: http://demohtml.templatesquare.com/think/portfolio.html#!prettyPhoto
    (next and previous buttun are there as well social connection)
    My problem is this: http://finca-sonrisa.bitl.nl/sonrisa_gallery.html
    (social connection is there but no next and previous buttons??)
    Anybody who has a solution fot this. Have tried to change the CSS, Javascript and has followed the instructions from Prettyphoto but without any succes.
    Your help we muchly appriciated,
    Best Regards,
    Rolf

    bump PLEASE HELP

  • Sync issues with iPhone 6 Plus and iTunes

    I'm having issues with syncing my iPhone and iTunes.
    I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
    Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied).  The longest this has occurred for is 2hrs.  After this time I have stopped the sync and ejected my iPhone.
    I had another issue with my phone when playing music.  When going to play music, I was given the error message saying that the song could not be found.  I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'.  I found the song and could see that next to the song was a small what looked like dotted grey circle.  After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song.  I did this and this was when the issue occurred again.
    I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again.  This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone'  tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play.  All played ok.
    I have read lots in the Apple forums about lost of difference reason this may be happening.  Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it.  My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
    I all so had this issue with my old iPhone 4S.  The problem occurred when running iOS 7 and 8 on the 4S.  When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app.  However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
    I am in contact with Apple Care, but this is such a long process. 
    So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful.   Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
    I will update my post with any information provided by Apple Care as and when I get it.
    Thanks for reading and thanks for your time.
    Mark. 

    Hi,
    Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
    Firstly I just want to updated my details about what version of Mavericks I'm running.  I'm running 10.9.5 - I put the wrong version down in my original post.
    So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
    I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices. 
    The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem.  For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD,  this was added and encoded with the version of iTunes that was running at the time of adding the music.  So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
    At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version.  However, due to the amount of music that I have, this is going to take a long time.  When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone.  This may just have been luck though at that time.
    Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on.  The only down side to this fix as far as I can see at the moment, is  that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
    I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
    Thank you all for your comments.

  • Issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4

    Since upgrading to the final version of OS X 10.10 Yoesemite I have issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4. I don't recall their being any issues while I went through the Beta testing process.  The Adobe products (PSE and PE) give me a configuration message "error 16" and it tells me to uninstall and reinstall. I have done this a few times/  It seems to go through the whole install process until the startup where it crashes.  I downloaded PSE 11 and at least it starts up but I haven't used it to do anything.  Also DiskWarrior 4.4 does not load up from the hard drive anymore (error message) and when I boot it up from disk is doesn't give me the option of correcting permission when repairing files and folders.
    At lease all of otheother software including Photoshop Lightroom 5.6 seem to be working.
    Very sad

    Barbara,
    Yes, I accessed the "updates" menu from the Help pull-down menu.  I also accessed the updates using the Mac Terminal application with results shown in my original post.  Regardless of whether I used the Help menu or the Mac Terminal app, the AAM tool still responded with:
    Update Failed
       Updates could not be applied
       The error log file may help you in identifying the problem.  The, try updating again.  If the problems persist, contact customer support for further assistance.
      The error log file read as follows:
       Photoshop Camera Raw 8.5
       There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
       Looking at the the output of the Mac Terminal app, it shows:
       ... hdiutil: attach failed - no mountable file systems
       Is this relevant?
    Regarding your follow-up message pointing to:
    Update 12.1 installation errors | Photoshop Elements, Premiere Elements,
    the files referenced in this link are present, are correctly named, and they are in the correct locations, so it would appear that these issues are not related to the ACR 8.5 update problem
    Thanks

  • HT4628 Still having issues with Lion os X and wi-fi

    I am still havign issues with Lion os X and wi-fi.   I have 3 domputers in my house including the new macbook pro that has lion os x installed.    The wifi drops out all the time (every 2 minutes).   I have followed all the instructions on how to fix this but I am still having issues.    The other two computers work fine,  one of the is Lion os X that has been updated but I managed to play with the setting and fix this one.   This computer worked fine on Snow leapard and then a soon as I installed Lion the wifi started having issues.
    When will apple make an update that is going to fix this problem.     You want to buy a new computer that works,  I took it into apple and they told me that it is my router,  but I know it is the software as there are 100's of blogs and threads about this exact issue occuring only when their computer was updated to Lion.
    Is there anything else I can do to fix this issue other then un-installing Lion and buying Snow Leapard?

    Does this problem happen with just your airport base station?  Do you have a 3rd party wireless router?  Can you duplicate the problem using any wifi access point?  Did your computer come with 10.7 preinstalled?  Did you purchase the applecare with your computer?

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • However, we've had issues with other legacy systems and programs for outlook

    I have a user who when she logs into her workstation and tries to access her outlook folders she is denied access. If she removes and then adds them back they work. Only one other person on our network had this problem which I initially thought was connectivity
    related. I replaced their cat five cable and that seemed to solve their problem. I tried this with this user and it cleared up for about a week but happened again today. Any thoughts or experience with this. Outlook doesnt support archives in a network share
    so I cant turn to them. It uses a login batch script to load mapped drives according to department. This all predates me so I did not build them. However, we've had issues with other legacy systems and programs so it is highly possible that this could be an
    issue.

    Will:Hi! Hi!
    I use Firefox and it is now No. 1 on my choice of browsers. I agree it doesn't like the "for IE only" coded sites but then IE is now a non issue as it is dead in the water! So Safari is now really bloated and getting slower by the version. Firefox is quick, good to look at with numerous skins, and what is more has become the browser of choice for web developers on both platforms because it sticks to the WWC3 code. Camino is just another flavour of Netscape which seems to be a bloat AOL IE wannabee product. Do yourself a favour and download Firefox. Give it a few spins around the block and I'm sure you will agree. As for the sites it declines to accept because of bad code, then I would suggest a strong letter of protest to the webmaster! For too long IE has been flouting the rules and trying to be the only game in town. Take some affirmative action and let the webmasters know there are other browsers available to users. If you are still not a believer then check this out:
    http://www.pcworld.com/reviews/article/0,aid,118959,00.asp
    May the force be with you!

  • Any known issues with Essbase 64 bit and other components as 32 bit

    Hi Everyone,
    Are there any known issues with 64 bit Essbase and other components (Planning, EAS, Provider services, EAS, Workspace and Reporting) in 32 bit?
    Version is EPM 11.1.1.3
    The reason for choosing ESSBASE 64 bit is of course performance. We decided to stick to 32 bit for the web applications due to some known issues and bitter experiences in past in this version with 64 bit web deployments.
    OS is Windows 2003 Server (64 bit for the ESSBASE server and 32/64 bit for the application server)
    Thanks,
    Sayantan

    Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

  • Is anyone else having an issue with performance in Mavericks?

    My computer is brand new. Just bought it a week ago. Since I installed Mavericks, I have been having very big issues with performance. It now takes forever to start up, it loads programs extremely slowly, and it randomly freezes for a few minutes at a time. Is anyone else having these issues? I have already re-installed the OS. What else can I do?

    Mavericks has certainly made up for all the problem-free updates I've had in the past! I have significant system drag (endless spinning beachballs....), Safari is incredibly slow, Mail - gmail & icloud - almost unusable. I'm desperately hoping the first OS update fixes things.

  • Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

    Greetings everybody,
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
    On this particular product, the product variants are supposed to work in such a way where:
    If you select the value "1/8" from the "Choose Ribbon Width" field
    THEN
    The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
    I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
    Thank you very much for your time and help!

    Hi...
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
    At the top of this window you'll see the following:
    Apple Support Communities > Mac OS & System Software > Safari > Discussions
    This the Safari forum for the Mac OS X.
    Better that you post your topic here  > Developer Forums: Apple Support Communities
    I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

  • I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

Maybe you are looking for