Issue with Plant to Plant Transfer Mvt type 301

Hi,
I'm trying to do a Plant to Plant Transfer using MB1B/MIGO,mvt type 301, from a plant / Storage location which is NON HU managed to a plant / Storage location which is HU Managed, I'm getting this error,
Message No : VL296.
HU cannot be delivrd from plant XXX stor. loc. XXX to plant YYYY stor. loc YYYY
Has anyone come across this error ? Any solutions?
Many thanks
Feroz

Hi Feroz
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock made up of packed and non-packed materials within the same storage location are not supported. HUs can also be managed in interim storage types.
if you want to use 311 to move the material already in stock, but in a non HUM Storage Location and you want to transfer those materials into a HUM Storage Location 304. If this is the case you can use the transaction VLMOVE with the destination plant and storage location. Before that you have to create the HU with the transaction code HU02 Storage location: where the material is and the status: in stock
please refer to the below link for additional details
link[http://www.sap-img.com/sap-hu.htm]
Regards
Vikrant

Similar Messages

MATERIAL TO MATERIAL TRANSFER MVT TYPE 301 INSTEAD OF 309

AS WE TRANSFER MATERIAL TO MATERIAL FROM
MVT TYPE 309
BUT WE CAN TRANSFER THIS FROM 301 ALSO,
SO WHAT WOULD BE THE DIFF BETWEEN 301 AND 309
AND IF WE TRANSFER FROM 301 THEN WHAT WOULD BE THE CONSEQUENCES.

Hi Nitin,
Main difference is by 301 you transfer material from one storage location to other of different plants. Material stock will transfer from one sloc to other
eg transfer of material A from ST01 of 1000 plant to Material A ST01 of 2000 plant. Material A will physically moved.
But 309 is made for transfering material from one code to other may be same plant or diiferent (mostly used in chemical industry.)
eg transfer of material A frm ST01 of 1000 to material B ST01 of 1000 plant. Material may moved if plant is different.
Reward if useful,
regs
Appie

Mvt type 301 'o'

Hi All,
We have the issue in the subcontracting :
we have 2 plants 0920 and 0931 . the subcontract vendor has assign to both the plant with the same vendor account number vc21707.
we do manufacturing one assmy by the above subcontract. for that we send the components of the assmy from the plant 0920. and they doing the process. after that we need to do GRIR for the assmy to the plant 0931. since we lock out the old palnt 0920.
client do not want the classical process. reverse the material and sto b/w plants and send thru new plant.
instead they need do the transfer the suncontrator stock which is given from 0920 to the new plant 0931
i.e. need to tranfer the subcontractor stock account from one plant to other plant account ,in which the vendor no is same to both the plant
how the mvt type 301 'o' type is used for this, do any configuration is needed.

Hi kishore,
we are doing this alone :
You can use only 301 O if stcok is already insubcontractor stock and you are transferring to other plant in the same stcok type.
but when doing this system check the restricted sub-contractor stock , but we have the unrestricted sub contractor stock.
thats why system show the error
Deficit of Stock w. vendor rstr 1.000 PC : 54204118 0920 O
Message no. M7021
HOW TO SOLVE THIS ISSUE.
Edited by: raj on May 20, 2009 12:03 PM

Issue with Member Formula written for Balance Type

Folks,
I am facing an issue with a member formula written for a balance type dimension,
The code says
IIF( IsUda([Accounts].CurrentMember, "BalanceSheet"),
CASE
*WHEN IS([Time].currentmember,[YearTotal]) THEN MISSING*
WHEN IsLevel([Time].CurrentMember, 0) THEN (BALTYPE.[EndOfPeriod])
WHEN IS([Time].currentmember,[Q1]) THEN (BALTYPE.[EndOfPeriod],Time.[MAR])
WHEN IS([Time].currentmember,[Q2]) THEN (BALTYPE.[EndOfPeriod],Time.[JUN])
WHEN IS([Time].currentmember,[Q3]) THEN (BALTYPE.[EndOfPeriod],Time.[SEP])
WHEN IS([Time].currentmember,[Q4]) THEN (BALTYPE.[EndOfPeriod],Time.[DEC])
END
,MISSING)
Outline Structure for Time dimension looks like below
+Time
--|+YearTotal
------|+Q1
----------|+Jan
----------|+Feb
----------|+Mar
The highlighted Part of the code works good for all the Measures which is With the UDA tag BalanceSheet, Except if the Measure with BalanceSheet UDA is a Parent Member.
Parent Level Measures are populated with Data(populating Dec Data) instead of showing #MISSING.
Any help on this issue will be appreciated.
Thanks
Sathish

Hello Gurus,
I raised an SR with Oracle support and they have replied by saying that, In EPM 11.1.2.4, the IE11 is only supported for interactive reporting and we will have to use IE 10 & 9 for workspace.
Yes. It works fine in IE 10 & 9.
Thanks,
Siva

System update configuration issue with local repository related to machine type

Hi,
Sorry if the issue has been posted earlier, i tried searching but cudnt find relevant post. Here is my issue:
My machine is Thinkpad R52. Type as printed on label is: 1858-CLG
While adding machine type in update retriever, I added machine type as 1858 (as it doesnt accept 1858CLG). After connecting to the support site, it downloaded all required updates onto a local(shared) repository.
I installed system update, configured it to pickup update from local (network) repository in the registry.
Now when I launch system update, it determines my machine type as 1858CLG & it connects to local repository only to display message as "No updates were found for this machine type"
Though I cud see updates if I directly connect to help center.
I think the problem is with machine type identification, not sure though.
Please advice on what I'm doing wrong. Is it with update retriever configuration or system update configuration.
Thanks much,

Solution for me was to change status of packages from "Test" to "Active" using Update Retriever.
Since this is not documented in Best Practices (but is stated in chapter 5 - modify settings) I spent several hours figuring it out..
-brian

Could anyone tell what's diff between mvt type 301 and 647?

Hi,
Since there has 301 already why still need 647??
What's the difference???
Thanks!!!
Would be better tell some detail regarding the movement type useage and difference in different module...
Thank you very much

Hi,
Movement type 301 is used to transfer material from a storage location in one plant to a storage location in a different plant. The value of the material is transferred at the moving average price of the issuing plant.
Movement 301 needs to be used each time material is moved from plant to plant. Normally both plants would be within the same agency and the physical distance not great when this movement type is used.
A goods issue for a stock transport order with delivery in Shipping is posted using movement types 641, 643, 645, or 647.
647 Goods issue for a stock transport order in one step
(Shipping)
Unlike movement type 641 when a goods issue is posted using movement type 647, a goods receipt line (movement type 101) is generated automatically in the receiving plant. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movement type 677.
For more knowledge in Movement type check out this
http://forum.saptechies.com/viewtopic.php?p=7505&sid=ee37f12564fc1c8aa9e5e131a5f402d9
Reward if this helps you
Regards
AK

Issue with creating array of custom data type - WebLogic Integration

Hi,
We are doing WebLogic integration with Siebel for which from Siebel side we have generated java wrapper class which has all the methods, input\outputs defined and in\out params are serialized along with get\set methods. Following are the details of the input\output args.
Account_EMRIO.java
public class Account_EMRIO implements Serializable, Cloneable, SiebelHierarchy {
protected String fIntObjectFormat = null;
protected String fMessageType = "Integration Object";
protected String fMessageId = null;
protected String fIntObjectName = "Account_EMR";
protected String fOutputIntObjectName = "Account_EMR";
protected ArrayList <AccountIC> fintObjInst = null;
Above class also includes constructors\overloaded constructor\getters\setters
public AccountIC getfintObjInst() {
if(fintObjInst != null) {
return (AccountIC)fintObjInst.clone();
}else{
return null;
public void setfintObjInst(AccountIC val) {
if(val != null) {
if(fintObjInst == null) {
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
For the nested user defined data type AccountIC, it is defined in another java class as below
AccountIC.java
public class AccountIC implements Serializable, Cloneable, SiebelHierarchy {
protected String fname = null;
protected String fParent_Account_Id= null;
protected String fPrimary_Organization = null;
With the above, I was able to get all the AccountIC in the wsdl correctly and using this I was able to set the input param in the client
WSDL:
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="tns:accountIC" minOccurs="0"/>
</xs:sequence>
<xs:complexType name="accountIC">
<xs:sequence>
<xs:element name="fName" type="xs:string" minOccurs="0"/>
<xs:element name="fParent_Account_Id" type="xs:string" minOccurs="0"/>
<xs:element name="fPrimary_Organization" type="xs:string" minOccurs="0"/>
minOccurs="0"/>
</xs:sequence>
</xs:complexType>
Now, I wanted to make slight difference in getter method of class Account_EMRIO method getfintObjInst so that an array of AccountIC is retured as output.
public ArrayList<AccountIC> getfintObjInst() {
if(fintObjInst != null) {
return (ArrayList<AccountIC>)fintObjInst.clone();
}else{
return null;
With the above change, once the wsdl is generated, I am no longer getting fintObjInst field for AccountIC due to which I am unable to get the array list of accountIC
WSDL:
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
The issue that I am facing here is, we have a custom data type(AccountIC) which has several fields in it. In the output I need a array of AccountIC. In the java bean, when this type was defined as
protected ArrayList <AccountIC> fintObjInst = null; I was unable to get a array of AccountIC. this gets complicated as inside a AccountIC there is array of contacts as well and all the time I am getting just the first records and not a array.
To summarize: How to get xsd:list or maxoccurs property for a field in WSDL for the user defined\custom datatype?
Can someone help me with this.
Thanks,
Sudha.

can someone help with this??

STO with delivery in 1 step (mvt. type 647) with serial numbering

Hi,
Error message IO306 ("Movement type 647 does not currently support serial number management") is generated when I try to Post Good Issue in a delivery with movement type 647 (stock transport order with delivery in 1 step).
Does anyone know how to solve this error?
In the SAP notes 213328 and 323992 to solve this kind of error with other movement types is proposed to maintain the V_T156SY concerning T156SY-VRGNG_S or T156SY-VRGNG_H in some of the entries, but I don't know the proper entries to solve this with movement type 647.
Thanks in advance.

Hi
If you are getting the Same error for Movment type 647 then maintain the entries similar to 641, but instead of PMS1 & PMS5 maintain ****
but i feel that this maintenace is not required for 647 movemnt.
Thanks & Regards
Kishore

Issue with the activation of transfer rules

Hi,
I am working with the datasource 0PRODUCT_TEXT, and I am trying to install transfer rules from BI Content and unable to get the active version.
But the transfer rules are showing inactive and the error is as follows.
Error generating program
Message no. RSAR245
Diagnosis
An error occurred during program generation:
Template:   RSTMPL80
Error code: 6
Row:        47
Message:    Statement concluding with "...LIKE" ended unexpect
Procedure
Correct the template to remove the problem
Please help me in this issue.
Thanks in advance,
Rama Murthy.

Try to run RSActivate* all transfer rule program that will activate the inactive transfer rules. Don't forget to replicate the datasource once again before you run the program.
thanks.
Wond

Issue with RCDC for Custom "Department" object type

Hey Guys,
Maybe somebody can point out where the issue is with the RCDC. I have a custom object type called Department in FIM portal and wanted to create a simple interface for it so users can add and edit department fields.
The only two fields that should show on the RCDC is department and divisions(this is the name of the custom field) all the fields work but I keep getting the following error "There's an error in the Department display configuration.Please contact your
system administrator"
Below is the RCDC:
<?xml version="1.0" encoding="utf-8"?>

<my:ObjectControlConfiguration xmlns:xd="http://schemas.microsoft.com/office/infopath/2003" xmlns:my="http://schemas.microsoft.com/2006/11/ResourceManagement" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<my:ObjectDataSource my:Name="object" my:TypeName="PrimaryResourceObjectDataSource"/>
<my:ObjectDataSource my:Name="delta" my:TypeName="PrimaryResourceDeltaDataSource"/>
<my:ObjectDataSource my:Name="rights" my:TypeName="PrimaryResourceRightsDataSource"/>
<my:ObjectDataSource my:Name="schema" my:TypeName="SchemaDataSource"/>
<my:XmlDataSource my:Name="summaryTransformXsl" <my:Parameters="Microsoft.IdentityManagement.WebUI.Controls.Resources.DefaultSummary.xsl"/>
<my:Panel my:Name="page" my:Caption="Default Configuration" my:AutoValidate="true">
<my:Grouping my:Name="_caption" my:Caption="Caption" my:IsHeader="true">
<my:Control my:Name="_caption" my:TypeName="UocCaptionControl" my:Caption="Create Department" my:Description="" my:ExpandArea="true">
<my:Properties>
<my:Property my:Name="MaxHeight" my:Value="32"/>
<my:Property my:Name="MaxWidth" my:Value="32"/>
</my:Properties>
</my:Control>
</my:Grouping>
<my:Grouping my:Name="DepartmentInformation" my:Caption="Department Information">
<my:Control my:Name="Department" my:TypeName="UocLabel" my:Caption="{Binding Source=schema, Path=Department.DisplayName}" my:Description="" my:RightsLevel="{Binding Source=rights, Path=Department}">
<my:Properties>
<my:Property my:Name="Required" my:Value="True"/>
<my:Property my:Name="Text" my:Value="{Binding Source=object, Path=Department, Mode=TwoWay}"/>
</my:Properties>
</my:Control>
<my:Control my:Name="Divisions" my:TypeName="UocDropDownList" my:Caption="{Binding Source=schema, Path=Divisions.DisplayName}" my:Description="{Binding Source=schema, Path=Divisions.Description}">
<my:Options>
<my:Option my:Value="" my:Caption="" my:Hint="Please Select a Division"/>
<my:Option my:Value="Division of Academic Affairs" my:Caption="Division of Academic Affairs"/>
<my:Option my:Value="Division of Administration" my:Caption="Division of Administration"/>
<my:Option my:Value="Division of Adult & Continuing Education" my:Caption="Division of Adult & Continuing Education"/>
<my:Option my:Value="Division of Information Technology" my:Caption="Division of Information Technology"/>
<my:Option my:Value="Division of Institutional Advancement" my:Caption="Division of Institutional Advancement"/>
<my:Option my:Value="Division of President's Office" my:Caption="Division of President's Office"/>
<my:Option my:Value="Division of Student Affairs" my:Caption="Division of Student Affairs"/>
</my:Options>
<my:Properties>
<my:Property my:Name="Required" my:Value="{Binding Source=schema, Path=Divisions.Required}"/>
<my:Property my:Name="ValuePath" my:Value="Value"/>
<my:Property my:Name="CaptionPath" my:Value="Caption"/>
<my:Property my:Name="HintPath" my:Value="Hint"/>
<my:Property my:Name="ItemSource" my:Value="Custom"/>
<my:Property my:Name="SelectedValue" my:Value="{Binding Source=object, Path=Divisions, Mode=TwoWay}"/>
</my:Properties>
</my:Control>
</my:Grouping>
<my:Grouping my:Name="summary" my:Caption="Summary" my:IsSummary="true">
<my:Control my:Name="summaryControl" my:TypeName="UocHtmlSummary" my:ExpandArea="true">
<my:Properties>
<my:Property my:Name="ModificationsXml" my:Value="{Binding Source=delta, Path=DeltaXml}"/>
<my:Property my:Name="TransformXsl" my:Value="{Binding Source=summaryTransformXsl, Path=/}"/>
<my:Property my:Name="Hint" my:Value="{Binding Source=schema, Path=%AttributeName%.Hint}"/>
</my:Properties>
</my:Control>
</my:Grouping>
</my:Panel>
</my:ObjectControlConfiguration>
Any advice is appreciated.

I don't know RCDCs well enough to debug it from the xml. One approach when I don't know something too well is to brute it. Copy one of the default RCDCs and make sure it's working then add the required attributes one by one checking that it works each
time. Once it's working with the added attributes remove all the ones you don't need. If that breaks it, go back to where it was working and remove them one by one.

New PC, new itunes, and iphone. Having issues with pairing/authorization/library transfer

Hello all,
I recently got a new PC. Before unplugging the old one, I deauthorized it from itunes. I immediately authorized the new computer. I also have cloud syncing on (for all the good it's doing me)
(HATE the new itunes btw - I find the user interface SUPER confusing and none of the itunes articles use the new version for reference).
Anyway, I must have messed up the initial sync or something. For some reason it's recognizes all of my apps, and happily adding anything I download from the phone back onto the computer - but everything else is a mess. I had to recreate my podcast subscriptions (no biggie) but it won't let me sync my music library back and forth (nor my audio books). It only seems to want to let me erase my music library on the phone with the mostly empty one on the computer. It's not recognizing the playlists from my phone at all on the PC, and today I bought some new songs on the PC and it won't let me add them to those playlists.
I even tried "transferring" back....but it's still not letting me access playlists and music libary
Any suggestions would be MOST appreciated. I'm not particularly interested in losing my entire music library that's on my phone. If I had to lose anything I guess I'd prefer to lose the songs I bought today on the PC.

Copy your whole iTunes folder from the old computer to the same location on the new one. It is trying to erase the phone because the phone is synced to the library on the old computer and does not recognize the one on the new computer. You can transfer purchases from a phone to a computer but otherwise file transfer is one direction, computer to phone.

Issue with XDCam log and transfer update

I'm trying to install Sony's XDCAM EX Log and Transfer Plug-in, and only can get as far as the "Destination Select" tab, where I'm informed that it "can't be installed on this disk. Final Cut Pro 6.0.3 or higher is recommended for this software."
I just installed Final Cut Pro 7 yesterday.
... what gives? Do I even need this update to be able to manage the videos from my PMW EX1r? I was unable to use them in final cut pro when I tried earlier, and was led to that "Log and Transfer Plug-in" from Sony and told it was the solution, which now won't allow me to even install it.

You have a number of options, make sure you have the latest Sony XDCAM EX Log and Transfer plug in (v1.2) also grab Sony's XDCAM Transfer (v2.12) which you can use instead of the aforementioned L&T plug in. Plus there is Sony's Clip Browser app (v2.6) for checksum validated offloading of the media from the camera/cards ... and now there is a brand new app called Sony XDCAM Browser (v1.0) which is designed to combine/consolidate the functions of the various utilities into one single handy dandy app. Unfortunately in this first release it has far inferior functionality as compared to what can be managed with the separate apps.
All of the above can be most easily downloaded (requires no registration) from Sony's Canadian website:
http://support.sonybiz.ca/esupport
Hope it helps
Andy
Andy

Issues with NMT and iTunes transfer.

Having major problems getting Nokia Multimedia Transfer to work. I am using:
N82
16GB memory card
NMT 1.4
iTunes 8.0.2
Mac OSX 10.5.6
10GB of music files (2000+ tracks)
USB connection
Problems:
I get no N82 device folder in iTunes no matter what order I connect and start things. "Enable iTunes Transfer" is selected in Device Settings. I can see a list of iTunes folders and playlists, select them and click Start iTunes Transfer.
The transfer appears to be happening but it is extremely slow and freezes intermittently. When I restart the transfer it spends up to an hour "Getting list of files on device". It then spends another hour or so deleting files with names like TMPxxxxx.$$$. I have let the transfer run overnight (8 hours) and it has only transferred about half of the content before freezing again.
Of the tracks that have transferred, when I try to add them to the Music Player using Refresh, each track takes about 10 seconds to add. With 2000+ tracks I'm looking at 5.5 hours to load the Player. Is this right?
When I start the Music Player it is taking 30-60 seconds to load and is extremely slow to navigate around; 30-60 second lags after each button press. In all other respects the phone is fast and responsive.
Is this typical of this device and the associated software? If it is then I'll be sending the phone back as music playout was one of my key purchasing criteria. At this rate I wouldn't even rate this as a "toy" let alone a serious alternative to a dedicated MP3 player!

Hi,
Thank you for your valuable feedback.
Please follow the steps below and check if it works.
-Open HDD-Library-Application Support-Find and Delete the entire Nokia Multimedia Transfer folder.
-Then navigate to users-Library-Application Support -Nokia Multimedia Transfer (delete) -Applications-Nokia Multimedia Tranfer-Control Click-Show package contents.
-Delete the entire contents folder.
-Make sure the trash is empty.
-Download and install NMT again from www.nokia.com/mac
-Now connect the device
-Go to NMT> Tools and Settings > Check for updates now
-Reboot Mac and then transfer.
Note: Using a 16Gb is officially not supported by the device, therefore the device might perform slow. Please check the device specification from the link provided below. http://www.forum.nokia.com/devices/N82
Hopefully this helps
Regards
Sandy
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

I am having issues with the disk drive accepting any type of disk, like a music CD. Is there any way to fix this without taking it to a Tech?

I need this fixed extremely quickly. I'm a photographer and I have two Senior photo shoots on Sunday (September 16), so I need to be able to use my computer that night for editing.

KrystaHaney wrote:
If I do that will it take my computer to factory settings and I lose everything? Or will all my programs and such still be there?
No. Of course you are suppose to have backups for all of your important work.
More suggestions....
Apple Portables: Troubleshooting the slot load optical disc drive
Cures for an uncooperative CD/DVD drive

Issue with Airport-iMac data transfer speed

Hi, folks. On 10.6.4 and 10.6.5, we'd recently seen the internet slowing down on our Intel iMac (not on MacBook Pro or either of our old G5 computers running tiger). I did some searching but couldn't track down an obvious solution. Symptom was app agnostic (i.e. it showed up in Safari, Firefox, Mail and Software Update).
One of our airport hubs sits just behind the iMac, though it was connecting wirelessly - when I connected the iMac via ethernet cable to the Airport, the speed of rendering, etc. came back immediately, no delays. I've now switched off the Airport at the iMac end completely.
So, bottom line appears to be that the wireless connection between iMac and Airport has slowed down. Any ideas about possible cause?
Thanks,
Vince

Vincent Tuckwood wrote:
bottom line appears to be that the wireless connection between iMac and Airport has slowed down. Any ideas about possible cause?
It may not show you anything useful, but I'd use the advice in this thread to investigate the signal and noise levels that the iMac sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1

Issue with Plant to Plant Transfer Mvt type 301

Similar Messages

Maybe you are looking for