Issue with Plugin Registration Tool in CRM 2013

Hi,
I've spent quite a while trying to connect up the Plugin Registration Tool for CRM 2013. I thought I'd had a breakthrough and got it connected but it's given me another problem. Let me try and explain where I'm at:
Software is installed and I can open it up and enter in some details about the discovery service.
With the credentials entered, I click on 'Login' and I get a pop up with 'Multiple CRM organizations are available to you. Please choose the one...' as the title and also a list of the environments to connect to - the list is as I would expect it to
look.
I select the environment and then click on 'Login' again.
I get the same pop up box again, titled 'Multiple CRM organizations are available to you. Please choose the one...' but this time, there's no environments in there. Just before this new pop up appears, there's a message on screen for a very brief moment:
"Initializing UII core connections to Microsoft Dynamics CRM...".
At this point, there's not a lot I can do. Has anyone got any clues as to why this is happening and how I can get passed it?

Hi Andrii,
Thanks for your reply. I tried double clicking but it didn't seem to do anything at all - the screen just stayed put. I noticed that after clicking 'Login' when I'd selected the environment, there was a message on the screen for a very brief moment before
I got the blank environment box - I tried to screengrab it a few times until I got it. It says "Initializing UII core connections to Microsoft Dynamics CRM..." - I don't know if this is relevany or not?

Similar Messages

Issue with special characters in SAP CRM ICSS application.

Hi ,
I have issue with the special character in CRM web application.
1. In CRM IC Webclient application(5.0) . i am copying and pasting some special characters in the description of the service request document. then this is saving the character as it is.
But when i am opening the same service request in SAP CRM ICSS(Internet Customer Self-Service) application, then the special characters are converting to different characters.
I am not sure whether this is the right forum for this or not.
Can anyone please suggest how can i correct this. Or is there any standard solution to handle the special characters in ICSS.
Thanks
Sudhansu

misunderstood =/
Original (Coming - output): "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
it's in output but what is data in database ?
sorry but without knowing about source data for forming the xml i haven't ideas about your problem
in db it's "TM " or "™" or ... ?
Original (Coming - output): "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
Something like XAE or "K" after PAY Value in the xml tag and continued the text value. (Tag value is not getting copied exactly here - i am sorry for that )
that's ok. i need to see the problem not the data as is
Expected (output): "Here it needs to produce the "PAY TM" (Here "TM" should be super scripted to "PAY" Value in tag).
as super scripted in xml?
as idea - you can have <PAY_TXT>PAY TM</PAY_TXT> and in publisher set TM as super
Designing XSL Subtemplates - 11g Release 1 (11.1.1)

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

BW hierarchies issue with BOBJ Reporting tools

Hi All,
Brief about the requirement:
Our client was using Mainframe and other tools for their reporting. Now as they have planned to go for SAP, purchased SAP BW 7 and SAP BOBJ XI 3.1 for warehouse and reporting purposes.
Initial Road map planned for implementation was
o     to use Crystal for operational and formatted reporting
o     to use WebI for Ad hoc and interactive reporting
o     to use Xcelsius for Dashboards
Once we started analysing the requirements, we observed that client requires hierarchies extensively for reporting and they donu2019t want to compromise in that for reporting. At this situation we have explored the options and came to know from the SAP sites that BO got limitations in case of BW hierarchies. But we not able to articulate the what is the exact issue. Is it with only WebI or Crystal also?
What we have articulated is we cannot report the hierarchies in BO in terms of nodes - > Sub nodes -> sub nodes instead we can do as fixed columns. Please add me if i am missing anything else.
And also please let us know options. Options that we were thinking are Implement with BO XI 3.1 considering Advanced analysis tool then upgrade to BO XI 4.1.
Please suggest us, what is the BW & BO hierarchy issue and right tools to use.
Thanks & Regards,
Bala

Our client uses XI 3.2 but is experiencing issues with Hierarchical BEX queries returning blanks - the mdx is fine - just webi that seems to have a problem and I'm also trying to determine in exactly which instances this occurs.
XI 4.x supposedly resolves mots issues but here again details are not known.
I.e. hopefully someone can point to an info source that describes in more detail what issues are likely to occur re hierarchies and webi.

Issue with custom fields mapping from CRM to ECC.

Hi all,
I have issues with replicating custom fields in a Service order. I have created new fields with EEWB and EEWC. Now the structure has been changed in ECC and CRM. But i have to map this fields to correct structures. Also i need some logic to apply.
But i have addressed in couple of threads about the custom function module as in user exit for FI generation.
But i didnt understand the concept of this custom function module. why is this been used?
Could anyone let me know with an good example on how this has to be acheived.
Points are highly awarded.
Kindly reply me.
Thanks,
Kiran...

Hi,
Here you go,
After you create custom characteristics.
1. Do Assign category.
2. Map contents.
3. Double check your master catalog has the mapped content.
4. Publish master catalog.
As per your message, you are not having any error message during import, which tells me that you are one step to close.
Cheers, Renga

SCM Issues with Sales Orders Created through CRM

Hi All,
I'm trying to ascertain any issues with ERP processing that will not update orders created through CRM, i see there was a OSS Note some time back informing that the backorder reschedule program would not update orders created in the CRM system. Is this still the case and are there any other process that we should be marking as an issue?
Thanks

Hi Sirisha,
The solution depends on the exact issue you are facing.
The CRM Sales Order is created OK, but you only see the error when you open the Sales Order?
If this is the case, then you can follow the steps below:
1. Find the Message ID and Message No for the error message
2. Use Program - CRM_MESSAGES_DELETE to delete error messages from the error producing Sales Orders.
Let me know if this is not the issue you are facing.
Regards,
Nelson

WIN10 issues with HP Protect Tools Security Manager

WIN10 won`t install on PC´s with HP Protect Tools Security Manager (WIN7), as it is incompatible with WIN10 install. program reuires that HP Protect Tools will be uninstalled before proceeding with installation of WIN10. However, this seems to be quite impossible. Just disabling the program with the stemps described earlier does not work. Has anyone info how to UNINSTALL completely the HP Protect Tools Security Manager? I guess HP will notice this issue soon because there are many HP PC owners with WIN7 (probably even WIN8) that are unable to install WIN10, and make steps to create a new with WIN10 compatible version of the Tools Sec. manager, but it will probably take some time.

Try update your system with HP SoftPaq Download Manager and reinstall Win10.The problem was my old version of HPPTSM. With 8.3.3.... works.My HP 6470b, Win7 64.

Issues with iCloud registration

Hi I'm having an issue with Icloud on my mac and iphone. I have tried setting it up more than once, but I never seem to receive the confirmation email. It doesn't go to my spam account, my email is accurate and apple is not blocked. Anyone else having this issue?

Fromsouth, I think you have misinterpret what i'm trying to say.
First of all, thanks for your help and advice.
I know that I can used my old ID in the settings for purchases, however I am using icloud.com for all of my mails, calendar etc. however I do not want to change my email address as I have changed it once from Hotmail.
You mentioned that it is stupid just to have an icloud.com address. If Microsft and Google can do it, i'm sure apple can. If I forget my Microsoft password I get them to send the reset password to my phone or I used my computer or any other authorised device to reset my password.
Don't get me wrong as I am a big fan of apple, all i'm missing from the apple range is a Mac. I truly do love the apple approach and I love my iGadgets. However, I would love to have the option of just having an apple account as I do not want or need a microsft or Google account. In fact, i'm happy to pay the premium to have extra iCloud storage....
And you are right, iCloud is an excellent service, one that I have come to rely on.

Issues with Hosted Exchange, UM and Lync 2013.

Hello everyone!
I am trying to deploy UM with Office 365 Hosted Exchange. We are using one Lync 2013 Standard Edition FE and have deployed one edge server. We have set up our firewall to host the Reverse Proxy.
We do not use wildcard certs. External DNS resolves the _sipfederation and sip._tls SRV records to the external face of the edge server. The edge server functions as it should for remote users and mobility.
I have tried to follow these instructions to the letter three times over to no avail.
http://y0av.me/2014/01/07/lyncum365/
Neither Snooper or Event Viewer show any particular issue, though when I try to dial out to voice mail I will get one to two rings and then 5 seconds of silence a fast busy, and finally "Call Unsuccessful".
When checking the firewall logs I notice a seemingly random 10.x.x.x address being sent to the firewall by the external leg of the edge server. Wireshark captures it as STUN packets on port 3478 being sent to port 3478. These are being dropped by our firewall.
I believe them to be RTP packets but I do not know if this is normal behavior. Has anyone any ideas?

My mistake. Here is the snooper result.
TL_INFO(TF_PROTOCOL) [edge\edge]0C4C.05E4::06/18/2014-15:43:34.153.0000000C (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265)) [3770767507]
Trace-Correlation-Id: 3770767507
Instance-Id: 2E5A
Direction: incoming;source="external edge";destination="internal edge"
Peer: exap.um.outlook.com:5061
Message-Type: response
Start-Line: SIP/2.0 488 Compression algorithm refused
From: sip:sip.domain.net;tag=08FB9ED133BA396696FE6546EA6F3031
To: sip:exap.um.outlook.com;tag=B8FFE4E9267ED6ECB78ADCC60126B53F
Call-ID: 66602CE1F9980BFA94AD
CSeq: 1 NEGOTIATE
Via: SIP/2.0/TLS 10.11.11.23:50752;branch=z9hG4bK2132316E.5B3AF52DE2753A36;branched=FALSE;received=207.46.5.9;ms-received-port=50752;ms-received-cid=60172700
Content-Length: 0
Server: RTC/5.0
TL_INFO(TF_NETWORK) [edge\edge]0C4C.05E4: :06/18/2014-15:43:34.153.0000000D (SIPStack,NegotiateLogic::SetCompressionType:NegotiateLogic.cpp(2701)) [559249495]( 00000079B1274FB8 ) Compression type is now CompOff
TL_INFO(TF_NETWORK) [edge\edge]0C4C.05E4: :06/18/2014-15:43:34.153.0000000E (SIPStack,NegotiateLogic::ProcessCompressionResponse:NegotiateLogic.cpp(2217)) [559249495]( 00000079B1274FB8 ) Peer refused [488] our request for compression
TL_INFO(TF_NETWORK) [edge\edge]0C4C.05E4: :06/18/2014-15:43:34.153.0000000F (SIPStack,NegotiateLogic::AdvanceOutboundNegotiation:NegotiateLogic.cpp(910)) [559249495]( 00000079B1274FB8 ) Outbound negotiation sequence is complete
$$end_record
And finally..
TL_INFO(TF_PROTOCOL) [edge\edge0C4C.05E4::06/18/2014-15:43:49.379.0000002E (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265)) [962697980]
Trace-Correlation-Id: 962697980
Instance-Id: 2E61
Direction: incoming;source="internal edge";destination="external edge"
Peer: fe1.domain.net:61254
Message-Type: request
Start-Line: BYE sip:uminternal.um.prod.outlook.com:5066;transport=Tls;ms-fe=CO1PR02MB111.namprd02.prod.outlook.com SIP/2.0
From: <sip:[email protected]>;tag=b736386270;epid=9bcee72318
To: <sip:[email protected];opaque=app:voicemail>;tag=eced411395;epid=07C3F2A933
Call-ID: 4266a095bdef8280d67c7e7df58446fc
CSeq: 2 BYE
Via: SIP/2.0/TLS 10.10.10.25:61254;branch=z9hG4bKC848F11A.A88BCA6858661A50;branched=FALSE
Via: SIP/2.0/TLS 10.10.10.125:49156;ms-received-port=49156;ms-received-cid=401200
Route: <sip:edge.domain.net:5061;transport=tls;opaque=state:Si;lr>
Route: <sip:exap.um.outlook.com:5061;transport=tls;epid=07C3F2A933;lr;ms-key-info=AAEAARc45bIQE6UJAYvPAR8eV4QTvCH3EE2Kxtie7I2PMCSj-2aArKHP8dStYlJe-9jphIkz_mDEkCD_v8hY-mghQEHD6-F12E7E14YG-TJ2gEcQE0Bx2r_rDB3LrzRZzgQ0WVvxreLPWGI80elWF-xfbc_X3JE8mOR2OB9KQM8-e9WOjfq2kj6CnDGeL0yzgz4OB8zm-ao03Yo4gMZ-BpwaxC3BNuvvVDJo9wqrYftq_Z3MIVewWrqcDt5Td4vxCsMiXdwEqtEIRKVvQoqboleBJAyQl-C3qGgfEoSkUnApFuTSnQYRa4kbZ1iPaACpdKT-VTQGjc9HXfps48YJCsIXW0Ab_NSM2uvhUyw900men1ukXSmoZoWZbwqe5siuWVUcFoQl1h1Jcy4lCyZUfDZoqPzDioLqTk9iUmS8fa-PAJjsq72yGjVB_y1aJSxtHVsw7MiDqOGOPqT3dmF-sINkeyuokCy8UCf_cQHmEHwVzZLUJqaVccr3QNCLsBzhcWSypnC60ZZphOKuwl6RvUXWICPf0ubLTL2ppC3tWEgFdUUWOPVd84uGlMcqRLKGb1qrmpj8Nu6Lte7t5n2pMEBCfgAe79t4GO0C5KScdKT_XBM1iIBRXdNkPKHfSgC-wPQgRikdw7vRD-hOWlN5Lay7-zkQ4Ag6rauszFTAwbft99OieAOxKIsgYcxXxcG6;ms-route-sig=fiEMuzbN4_PyEz_I5gG3g8FtqNAonwgZCoRnOq-ByfYEtywTZp-Hk_eAAA>
Max-Forwards: 69
Content-Length: 0
ms-client-diagnostics: 22; reason="Call failed to establish due to a media connectivity failure when both endpoints are internal";CallerMediaDebug="audio:ICEWarn=0x40003a0,LocalSite=10.10.10.125:6735,LocalMR=10.11.11.23:51430,RemoteSite=10.27.46.15:5286,RemoteMR=207.46.5.80:54106,PortRange=1025:65000,LocalMRTCPPort=51430,RemoteMRTCPPort=54106,LocalLocation=2,RemoteLocation=2,FederationType=0"
$$end_record

Mysterious issues with the pen tool in flash (CS3 & CS4)

i have searched tirelessly for the answer to this problem and still have no answer. when using the pen tool to create shapes, occasionanally when i click to add the next point the line segment jumps over to a previously added point. also, sometimes when i add a point, the point mysteriously starts moving on the screen all by itself. i have used illustrator for many years and it's pen tool is perfect in so many ways and it is counterproductive to have to jump to illustrator to do any pen tool work and then import it into flash
anybody have this issue or know why this might be happening?

Hello
I have the same issue. I think it is a bug.
Sometimes when I delete points with <delete> key on keyboard, flash also deletes randomly frames on locked layers with all of its contents.
You have to start tricking over these issues, if you do not want to be nervous. Like using a one key -shortcut substitute of Ctrl+Z
Sometimes it's happening, because there are not perfectly overlapping shapes on each other on one layer, .
Sometimes because there are a parenting issue, flash sometimes breaks, if you draw to deep under the "root" of the
project.
Or if you have a lot of vectrice on one layer. But I am just guessing too.

Issues with nokia configuration tool 5.0 - E72

I wanted to install a new profile and save the old one for a few people.
Since typing on the PC is much easier, I hoped I could use the configuration tool
After reading the data it lost contact and couldn't find my phone again.
A new try after running PC-Suite 7.1 first:
it finds my phone (with latest firmware) but cannot import / read any data
Any ideas?
By the way: the change language options doesn't work (only English has been installed)

Hi,
I am experiencing similar issue: from PC Suite v 7.1.40.6 I can see the Nokia E72-1 mobile phone, from the Nokia Configuration Tool v 5 I can also see the Nokia E72-1 but from the Configuration Tool I cannot Edit Online the mobile phone and I cannot push a configuration either. This is weird !
Also, wether the phone is connected through USB or Bluettooht, I get the same results.
Anyone has an idea why this happens and how to solve the situation ?
Regards,
Bluea.

Issue with @mention urls in newsfeed - SharePoint 2013

I have configured mysites in SharePoint 2013 with following cnfigurations,
Server name : Server1
Alternate Access Mappings for Portal (on port 80): Server1 (default), Intra.domain.com
Alternate Access Mappings for MySites (on port 1234): Server1:1234, mysite.domain.com . I created these by extending web applications on port 80 with host header.
When accessing Mysites using - mysite.domain.com
I am able access mysites and intranet portal without any issues, browse org chart, post comments etc..
Links to Newsfeed, Onedrive Pro, about me etc.. all are working fine.
links to Hashtags are working fine. E.g #SharePoint
But when i post with '@mention' links to these user profiles are taking me to 'Server1:1234' urls instead of 'mysite.domain.com' urls.
Did any one experience similar issue? I am not if it is a bug in SharePoint.
Any ideas to fix this issue?

Hi Srujank,
According to your description, my understanding is that the URL changed to Server:1234 when you posted with @mention in Newsfeed.
Did this issue occur with other users?
How did you configure the Alternate Access Mapping for the My Site web application?
I recommend to set the Server:1234 as the default zone URL of the My Site web application and set the mysite.domain.com as the other zone’s URL.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Issues with the color category in Outlook 2013 mail

We use Microsoft Outlook at work where we have the same email account on a few computers. The color categories have been very useful, especially when more than one person is working with the same email account, to indicate who is supposed to do what and
what have already been dealt with. So when we upgraded our computers to Windows 7 and installed Microsoft Office 2013 it was very frustrating to find out that the color categories dosen't sync between computers.
Does anybody have a solutions to fix this problem?

Categories sync between computers but when you use a shared mailbox, colors aren't shared, except between owners. Each person has to maintain their own color category list for the shared mailbox. There are utilities you can use (or use macros) to
share colors.
Color Category utilities
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

Issue with Web report interation on CRM Portal (7.0)

Hi,
System Landscape/Access route: CRM Portal (7.0) => One BI System (ABAP + JAVA = 7.3 SPS 5 Patch 3)
After we upgraded our dual SID One BI system (BI-ABAP + BI-JAVA) to 7.3 SPS 5 Patch level 3; the CRM Portal (version 7.0) which uses Application Integration iViews to launch One BI reports has following issues:
1. Buttons like Open, Save, etc. do not work
2. Drag-drop of characteristics from Free-Characteristics into report does not work.
These functionalities work for the same query if I copy the BI-Java stack URL in a separate internet browser. But the same query / URL does not work when rendered via the CRM Portal.
All these functionalities were working prior to the One BI upgrade. Can you please guide on how to fix this issue?
Thanks and regards,
Pratik

Hi,
Kindly confirm what was the earlier version of the One BI System (ABAP + Java), before it was upgraded.
Thanks,
Swapna Priya.

Issues with Rectangular Marquee Tool [was: I have a question]

The problem is with the 'rectangular marquee tool' ... after I select a box, the tool defaults to a marquee that eliminates a portion of the first selected box. The curser changes to show the '+' curser with an 'x' in the lower right of the cursor ... how do I get rid of this?

It sounds like you have Intersect with selection enabled in the tool options bar instead of the default of New selection.
Though it sounds like you want to add to the prevous selection?
I usually just leave the default of New selection and use the following keyboard shortcuts instead of clicking on different options in the tool options bar.
http://help.adobe.com/en_US/photoshop/cs/using/WSD578BD7D-07BC-46f6-AAC2-6E491E8AD818a.htm l#WSB7273C71-12FE-4f05-8E2C-D4A571E0692Ba

Issue with Plugin Registration Tool in CRM 2013

Similar Messages

Maybe you are looking for