Issue with PO change and message determination

Hi Gurus,
I have an issue while changing the PO which as below:
In a Z program, calling BAPI - BAPI_CREATE_CHANGE to change few fields of PO and have set below two parameters of BAPI to 'X' as the requirement is NOT to determine and execute output types.
NO_MESSAGING = 'X'
NO_MESSAGE_REQ = 'X'
The issue is - Though above two parameters' values set to 'X', messages are getting determined and executed.
Please let me know if you have faced similar issue and what steps you followed to resolve it.
Regards,
Hiren

If you're using a standard form, send a message to SAP. Otherwise make a change in the form.

Similar Messages

Having issues with face time and messages to connect with people overseas

I seem to have issues with contacting two people who live overseas. I was recently visiting that country and while there had no problems contacting them. Also while en route in /Seoul airport was still able to contact them but when arriving back in -Australia , am no longer able to send or receive messages from them or calls on face time. Similar issues with these contact on viber and talk box. Any ideas?

I seem to have issues with contacting two people who live overseas. I was recently visiting that country and while there had no problems contacting them. Also while en route in /Seoul airport was still able to contact them but when arriving back in -Australia , am no longer able to send or receive messages from them or calls on face time. Similar issues with these contact on viber and talk box. Any ideas?

Issue with XML namespace and Message structure

Hi All,
I am using Oracle SOA Suite 11.1.1.4. I have SOA web service application one-way messaging wherein I keep receiving messages from the third party. The issue I am facing is with the XML namespaces which conflicts with the third party's message structure. The details are as below.
Our Web-service WSDL*
<schema attributeFormDefault="unqualified" elementFormDefault="qualified"
targetNamespace="http://amb.com/cad/RealTimeService"
xmlns:cad="http://amb.com/cad/RealTimeService"
xmlns:avl="http://schemas.com/asiapac/cad/datamodel/avl/1.0.0"
xmlns:evn="http://schemas.com/asiapac/cad/datamodel/event/1.0.0"
xmlns:uni="http://schemas.com/asiapac/cad/datamodel/unit/1.0.0"
xmlns:dvt="http://schemas.com/asiapac/cad/datamodel/divert/1.0.0"
xmlns:sui="http://schemas.com/asiapac/cad/datamodel/suppinfo/1.0.0"
xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.com/cad/datamodel/avl/1.0.0"
schemaLocation="AvlCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/unit/1.0.0"
schemaLocation="UnitCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/event/1.0.0"
schemaLocation="EventCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/divert/1.0.0"
schemaLocation="HewsCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/suppinfo/1.0.0"
schemaLocation="SupplementalInformationCadSchema.xsd"/>
<element name="AvlAuxData" type="avl:AvlAuxData" nillable="true"/>
<element name="AgencyEvent" type="evn:AgencyEvent"/>
<element name="Diversion" type="dvt:HospitalDiversionMessage"/>
<element name="SupplementalInformation" type="sui:SupplementalInformation"/>
<element name="UnitDetail" type="uni:UnitDetail"/>
</schema>
Using SOAP UI tool a HospitalDiversionMessage Request for the above WSDL will look like*
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:real="http://amb.com/cad/RealTimeService" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<*real*:Diversion>
<ns:Action>?</ns:Action>
<ns:Open>?</ns:Open>

<ns:Location>?</ns:Location>
<ns:Type>?</ns:Type>
<ns:SubType>?</ns:SubType>

<ns:ExpiryTimestamp>?</ns:ExpiryTimestamp>

<ns:Comment>?</ns:Comment>

<ns:ItemNumber>?</ns:ItemNumber>

<ns:Notifications>?</ns:Notifications>
<ns:CreatedTerminal>?</ns:CreatedTerminal>
<ns:CreatedTimestamp>?</ns:CreatedTimestamp>

<ns:ClosedBy>?</ns:ClosedBy>

<ns:ClosedComments>?</ns:ClosedComments>

<ns:ClosedTerminal>?</ns:ClosedTerminal>

<ns:ClosedTimestamp>?</ns:ClosedTimestamp>
</real:Diversion>
</soapenv:Body>
</soapenv:Envelope>
Now the third party sends a HospitalDiversionMessage in this format_
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="http://amb.com/cad/RealTimeService" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<ns0:Diversion>
<ns0:Action>?</ns0:Action>
<ns0:Open>?</ns0:Open>

<ns0:Location>?</ns0:Location>
<ns0:Type>?</ns0:Type>
<ns0:SubType>?</ns0:SubType>

<ns0:ExpiryTimestamp>?</ns0:ExpiryTimestamp>

<ns0:Comment>?</ns0:Comment>

<ns0:ItemNumber>?</ns0:ItemNumber>

<ns0:Notifications>?</ns0:Notifications>
<ns0:CreatedTerminal>?</ns0:CreatedTerminal>
<ns0:CreatedTimestamp>?</ns0:CreatedTimestamp>

<ns0:ClosedBy>?</ns0:ClosedBy>

<ns0:ClosedComments>?</ns0:ClosedComments>

<ns0:ClosedTerminal>?</ns0:ClosedTerminal>

<ns0:ClosedTimestamp>?</ns0:ClosedTimestamp>
</ns0:Diversion>
</soapenv:Body>
</soapenv:Envelope>
Questions*
1) I cannot figure out how the SOAPUI tool or SOA substitutes "real" as the namespace prefix for the WSDL based HospitalDiversionMessage and what I need to do at my end to match the message structure as per what the third party needs.
2) I need ns0 namespace prefix to whole of Diversion xml element. Currently it is "real" at top Diversion element and "ns" for its children
Please suggest, I can attach the other imported XSD if need be.
Thanks
Edited by: user5108636 on Jun 13, 2011 6:55 PM
Edited by: user5108636 on Jun 13, 2011 6:57 PM
Edited by: user5108636 on Jun 13, 2011 7:02 PM

Questions
1) I cannot figure out how the SOAPUI tool or SOA substitutes "real" as the namespace prefix for the WSDL based HospitalDiversionMessage and what I need to do at my end to match the message structure as per what the third party needs.The xml namespace suffixes like real and ns0 are just references used by the XML Parsers. For that matter the "real" can be xyz as well.
You dont need to make any changes as long as the xml namespace suffixes refer to the same namespace.
If you see the first soapUI xml and the third party xml have the same namespace references and hence it is not a problem:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:real="*http://amb.com/cad/RealTimeService*" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<*real*:Diversion>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="*http://amb.com/cad/RealTimeService*" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<*ns0*:Diversion>
2) I need ns0 namespace prefix to whole of Diversion xml element. Currently it is "real" at top Diversion element and "ns" for its childrenBased on this, logically both the xmls represent the same xml message. And hence you dont need to make any changes.
Please refer to the basics of xml namespaces using the following links:
http://en.wikipedia.org/wiki/XML_namespace
http://zvon.org/comp/r/tut-Namespace.html#Pages~Introduction
Let us know if you still need clarification.
Hope this helps.
Thanks,
Patrick

My Snow Leopard on Mac crashed today (while browsing on Safari). Unable to launch. It was possible to start it only thanks to DVD. What could be a problem? I found in my console some strange issues with Magic Preferences and message about inability to rec

My Imac crashed today on browsing. I could launch only from DVD. Any explanation for this?

the only problem I see (BTW from the very beginning already for 3 years ) there are two sectors reallocated (visible in SMART diagonstics. the treshhold being 36). Otherwise everything seems all right, sectors. preference files. privileges,....... Do you think those two sectors make a problem now?

Issue with PO change output - Service line items

Hi All,
This is issue with PO change output. We have PO with line item 10, 20 and item 10 has 4 service line items. PO is approved and initial print out is taken.
Some one goes and makes changes to 1st service line items of PO line item 10.
A change output gets triggered. When this output is printed, it prints line item 10 details. This is standard functionality as this item is changed. But its printing all the service line items for this PO line item. Consider a case where there are 3000 service lines for a PO item. If I add 1 service item to this PO line item, the change form prints 3001 services for that line item. There were no changes done to first 3000 service line items.
Currently PO change form takes care of changes at PO line item but it does not take care of changes at service line item level.
Is there any setting that needs to be done for this so that it only considers the changes at Service line item level also.
Regards,
Shahu

If you're using a standard form, send a message to SAP. Otherwise make a change in the form.

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

Issues with Exchange Account and Q10

Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
Ian

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

Issue with Home Address and Phone of ESS(data not getting saved)

Hi Everyone,
We have a issue with ESS HomeAddress and Phone. when we edit and save data, its showing a message that data is saved. but the data is not getting updated in the backend and the view also is showing old data only. Pleas help us, if anyone came across this type of issue.
Thanks & Regards,
Ravi

Please check the fields you are editing are not marked as unused in
V_T588M
V_T588MFPROPS
V_T588MFPROPC
Best wishes
Stuart

Has anyone received an update on apple tv issue with HD movies and what they are doing about it

Has anyone received an update on apple tv issue with HD movies and what they are doing about it

Whatever the rep told you, it is complete nonsense. There is clearly a problem at your end, the Apple TV 3 is capable of more than the Apple TV 2, and you clearly have the Apple TV 2 working perfectly. Since the Apple TV 2 is able to download from the Internet properly, then my suspicion would be your problem lies on your local network. Interference is a common problem on local networks.
Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Strange issue with USB mouse and USB headset.

Good day everyone.
I was experiencing a rather strange issue with my mouse and headset(both USB).
I am using KDE and ALSA, if that matters.
They are working just fine, but sometimes, when I try to lower\raise volume, my mouse derps out. I can move it around, but I can't click on anything(sometimes though, I can click on stuff in window that was active before and sometimes only on KDE panel) until I re-plug my headset. Then, nothing can use my headset until I reboot.
Anybody ever had that problem?

I've had similar problems for some time now. Unfortunately, I don't know what the issue is either, but perhaps we can come up with some setup similarities and narrow it down. I have similar trouble with just alsa or with pulseaudio, so that's not it. It is unrelated to the DE, as it happened for me in both gnome 2 and xfce 4. It is not related to the machine either, as the same quirks occur in other machines with the same headset. I have had inconclusive results with downgrading to kernel26-lts, the ancient kernel. I thought at some point it messed up and I was sure the older kernel didnt help, but after trying recently-ish, I had no trouble for days -- until I found that I didn't have trouble on the main kernel either. ... then a few days later, it showed up again. Very irritating!
https://bbs.archlinux.org/viewtopic.php?id=122475
Does my old thread sound like your issue somewhat?
Essentially, at times, if the headset (wireless) is changed into a different power state (unplugged/plugged) or the mic state is toggled (mute/unmute), things that could be clicked on normally cant unless theyre in the window already focused -- mostly.
What headset are you using? 32 or 64 bit arch? Have you tried downgrading to kernel26-lts?

"Copy to clipboard" issue with Acrobat X and Skype extension in Firefox

This post is just to let you know that there is and issue with Acrobat X and the Skype extension in Firefox.
I don't know why but when both programs (Firefox and Acrobat) are opened and I try to copy something from a PDF I always get an error
message like "Impossible to copy into the clipboard. An internal error occurred".
If I close Firefox or I disable the Skype extension for Firefox everything runs smoothly.
It is really odd, I don't know if it is a problem of Acrobat, Firefox or of Skype....
Are anyone experiencing the same problem?
See you.
Alessandro.
Ps. I'm using Windows Vista SP2, Skype extension 5.2.0.7165, Acrobat 10.0.1, Firefox 3.6.16

Just found your post after getting the same problem with Google Chrome and Adobe Reader 10. It doesn't happen all the time but is annoying. If I switch Chrome off the problem is cured. Switch it straight back on and the problem reappears. It has only started after Skype was installed. Thanks for posting - I'll just switch Chrome off for now when I want to copy and paste unless a fix appears.

Apple Support admitted an Issue with WEP authentication and some Routers

After reading many posts here and other places I logged a service call to Apple support. With the particulars: AT&T U-verse 2 Wire router would not connect with WEP would connect with Security disabled. I wanted a call logged before I went past the return time
I got a call back immediately after a few basic questions I was passed to a product manager for ipads, it seems connectivity issues are taken seriously.
The upper level support said there were known issues with some routers and WEP security we steeped through changing the security and it works fine now.
Bottom Line:
Apple knows there is an issue with some routers
They were very helpful and acknowledged the issue.
He even stayed on the line while I reconfigured one of my Windows PC to make sure it connected to the new settings
I suggest to all to log a call and get a tech support involved before taking the iPad to the local store
They certainly new their are some connectivity issues. If that does not work you can always return it.
He did not admit it was a Apple issue and did not commit that Apple was working on it but it is something they are aware of.
So skip the Apple store got right to tech support.
Just my 2 cents.

"But folks need to go straight to tech support. I live in oz, so it will be interesting to see if they help me.. or not.. but if support gets inundated they will fix it or have a massive recall (not likely on the latter)."
Can't agree more. I used to manage a tech support department and it is all about the numbers. No matter how many forum entries the issues that get addressed are dictated by the reports.
So for those that are buying new routers contact Tech Support first even if you end up getting a new router the call is logged that will get Apple's attention.
People that are not familiar with post launch processes have no idea how things that need to get corrected and enhanced are dictated by support requests

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I am having major issues with Logic 8 and want to reinstall.

I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?

What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

Issue with PO change and message determination

Similar Messages

Maybe you are looking for