Issue with polling files in File Adapter

Hi Team,
I am facing a issue while using a File adapter to poll file from a directory.I am illustrating the scenario below
It is a File to Proxy Inbound Scenario. In the sender file adapter module we are using the Plain2XML.
Now when I have uploaded the file say 874.txt in the directory.Adjusted the file name in the comm channel accordingly ,refresh the adapter in RWB but find that the file is not getting picked up by the adapter.The adapter is also not throwing any error in RWB.I just tried with stopping and starting the adapter but it is not picking up the file.
Can anyone please let me know what might be the issue?
Thanks and Regards
Atanu Mazumdar

Hi Atanu Mazumdar,
P. Rajesh has already indicated the way to see the channel locks. Now you need to have access to visual admin. Follow these links to get into Visual admin http://www.saptechies.com/visual-administrator/
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40a08db9-59b6-2c10-5e8f-a4b2a9aaa3d2?quicklink=index&overridelayout=true
Alternatively Please consult your BASIS team, they can release channel lock easily.
Finally one more checking : if your operating system is UNIX you need to make the file permission bits set to rwx by others and group. i.e chmod 777 filename
regards
Anupam
Edited by: anupamsap on Jul 12, 2011 2:38 AM
Edited by: anupamsap on Jul 18, 2011 7:37 AM

Similar Messages

Issue with Opening a PDF file

We have just completed an upgrade of one of our servers executing Reporting Services.   The upgrade was from 2005 to 2008.
After we have rendered a report and have it saved in PDF format, we start having issues.
If we try to open the PDF by double clicking on the file name in Windows Explorer, Adobe Reader starts, but sits unresponsive and consumes an excessive amount of CPU cycles.    It never completes the open and we have to kill the Adobe Reader process in Task Manager.
If we start Adobe Reader, and then use the Menu to do FIle -> Open, the PDF file opens immediately.
We have attempted both methods using several different versions of Adobe Reader.    The issue occurs on all versions prior to 9.3.
Since we are a service organization, we are unable to force our clients to upgrade to a more current version of Adobe Reader without providing assurances that this will correct this issue.
Has anyone else seen this type of issue with opening PDF files rendered by Reporting Services?   And if so, what is the cause and how did you correct it?
Thanks
Steve

Hi there,
Please find attached a word document which contains the error that comes up when I try to open the PDF file. This PDF was e-mailed to me from one of the Safety companies that I receive e-mails from on a regular basis. I believe I am running Windows XP and the version of Adobe is Adobe Reader X. I hope this is enough info for you.
Janice Nadeau
[signatue deleted by host]

DNG 5.4 beta converter issues with Hasselblad H2D-39 files

I was directed to this forum when I posted a note on the DNG converter 5.4 beta, converting to use on Photoshop CS3 (see thread http://forums.adobe.com/thread/436940?tstart=0 )
The converter has a very interesting "fail pattern" when converting Hasselblad .3fr files:
First file fails (error message displayed is "Unknown error", second file converts OK, 3rd fails, 4th OK, 5th fails, 6&7 OK, 8th fails..
By about the 20th file, 5 are successfully converted in a row and then by file 30, no more failures!
So it would seem that there is not really a problem with actually reading/processing the .3fr file content. Instead looks like some form of memory or other issue in the code??
I have also noted a few cases of problems with the conversion itself, picture ends up totally posterized, see attached file which is unmodified out of raw -> PS CS3:
Finally, processing the DNG files converted still fails on Photoshop CS3 as reported earlier in this thread:
http://forums.adobe.com/thread/421742?tstart=0
If I open the DNG file in PS CS3 and save pretty much immediately, saving works. If I do almost any processing, the "Save as" freezes PS3 before the file/directory selection dialog starts. Only forcefully stopping Photoshop helps. Looks like there is something in the "Save as" dialogue that does not check for exceeding max memory allocated to Photoshop or similar?

Hi,
Thanks for responding. I thought this was the forum pointed to from the download site, was not aware of the dng forum. Though there is another post on probs with convering Hasselblad files ( http://forums.adobe.com/thread/436615?tstart=0 ), my symptoms are quite similar ("Unknown error") so I would suspect this could be related to the same prob? As I am quite keen to get rid of the Phocus software, if there is anything I can do to help you fix the bug, just send me a note.
Thanks, Håkan
Ian Lyons kirjoitti 31.05.2009 kello 11:30:
If you're using the DNG converter then raising the issue on the
appropriate
forum might get a bit more attention
http://forums.adobe.com/community/dng
>

Issues with NAS, iPhoto, RAW file format, AEBSn, Leopard

I think I've isolated it down to a networking stack issue with Leopard, but I was hoping I could get some more thoughts/advice. I don't want to downgrade to Tiger, but I may need to! Either that or host my iPhoto library locally.
Scenario:
My iPhoto library was messed up. Some albums were missing and it couldn't seem to find them. Rebuilding my library was giving me errors. So, I decided to start fresh. I created a new library and began importing files. I noticed that my RAW (.CR2) files were showing glitches in them! These were major glitches, like big squares of blue or yellow and distorted pictures. I checked the original pictures, those were fine. I checked the pictures in my new iPhoto library, those files are corrupted! Not the thumbnails, but the files themselves. I opened the file in Photoshop to verify. Yup, busted.
Attempted Solution:
I tried downgrading to iPhoto 7.0 from 7.1.1, thinking that that might be the problem. Still having issues with the RAW files. Do I need to downgrade to iPhoto 6? I can't believe that's the answer. Even in iPhoto 7.0, the problem persists.
Now here's the interesting thing: not all files are broken. Some files work, others don't. Some files are imported without glitches some of the time; reimporting them results in a glitch. That suggests to me that it's a networking problem.
I'm using 802.11n to an AEBSn2 (gigabit), which has a ReadyNAS NV connected to it by gigabit ethernet. I don't think it's a hardware network thing since everything seemed to work in Tiger.. I think it's a way that Leopard handles the networking stack. Didn't they revise the underlying network stuff for Leopard?
Help!

Are you able to switch to 11g? I heard that helps for some people. I haven't tried it yet. Right now, I have about 7500 photos, so I want to copy everything and back it up. Once I get it backed up, I'm going to try other solutions, but it may be a few days before I get anything tested.

Media Encoder CS4 issues with MP4 and M4V files

I've just got CS4 and and very happy so far. EXCEPT I'm
trying to convert some MP4 and M4V videos to FLV using the new
Adobe Media encoder.
When I look at preview screen in the settings panel, the
preview is all wrong. It is just Green and Purple - kind of like
some weird negative image. This also is how the final converted FLV
looks. The CS3 version of Flash video encoder converted these exact
same files OK (although the preview was only a blank screen, but
the final file was OK).
Has anyone else seen this and more importantly, did you
manage to solve the issue?
I'm running this on an iMac G5 with 2GB RAM - could this be a
PPC issue?

Sorry my computer AND media encover version. I run Creative Cloud on a new Mac Pro
File seems to render fine
Log info:
- Source File: ***
- Output File: ***
- Preset Used: Match Source - High bitrate
- Video: 1920x1080 (1.0), 25 fps, Progressive, 00:00:42:17
- Audio: AAC, 320 kbps, 48 kHz, Stereo
- Bitrate: VBR, 1 pass, Target 10.00 Mbps, Max 12.00 Mbps
- Encoding Time: 00:13:13
04/27/2015 03:55:51 PM : File Successfully Encoded
No errors reported.
And this is what I end up with.
Is that helpful?

Issue with BPM-Merging 2 files.

Hi all,
I am facing one issue with my development object...it is a BPM scenario in which i am merging 2 files using constant correlation id...JDBC to File scenario...i am using 2 JDBC adapters at source side...the scenario is getting executed without any error and i am getting the output...but the output contain only the data in 1 file...merging is not happening and only one file data is displayed in the output...could someone help me with this issue???am i missing something here??any help will be really appreciated...
Thanks,
Lekshmi.

Hi all,
As informed in my earlier post the same scenario was working with File adapters at source side.I figured out why it was working earlier.
Since i have generated the source files for the File adpaters i have added the name space as displayed in the mapping(highlighted in bold letters).
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:Test1_MT xmlns:ns1="http://testing.com/Details">
         <row>
         </row>
      </ns1:Test1_MT>
   </ns0:Message1>
   <ns0:Message2>
      <ns1:Test2_MT xmlns:ns1="http://testing.com/Details">
         <row>
            <VIA_NO/>
            <VSL_NM/>
            <ATA_DTTM/>
            <PATA_DTTM/>
            <ADT_INS_DTTM/>
            <ADT_UPD_DTTM/>
         </row>
      </ns1:Test2_MT>
   </ns0:Message2>
</ns0:Messages>
But in the case of real time scenario data is pulled from database and the input file is created through JDBC adater i am getting the source message for mapping as :
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns:Test1_MT xmlns:ns="http://testing.com/Details">
         <row>
         </row>
     </ns:Test1_MT>
   </ns0:Message1>
   <ns0:Message2>
     <ns:Test2_MT xmlns:ns="http://testing.com/Details">
         <row>
            <VIA_NO/>
            <VSL_NM/>
            <ATA_DTTM/>
            <PATA_DTTM/>
            <ADT_INS_DTTM/>
            <ADT_UPD_DTTM/>
         </row>
     </ns:Test2_MT>
   </ns0:Message2>
</ns0:Messages>
When i tested this message in message mapping it is giving only the first file in the output.
Any idea how to resolve this one?
Rgds,
Lekshmi.

Issues with CS5 Illustrator .ai files

I just recently purchased CS5 Illustrator. After creating the file as an .ai file, I am having an issue with reopening the file. I get an error. Any suggestions?

Post in the general forum… Your question is at a very small audience here in the scripting forum… Thats all of us… not enough to throw a party…

Buffer Issue with streaming 10 MB file

Hi there,
Having a bit of a nightmare, essentially I have this code:
private void streamBinaryData(String urlstr,String format,HttpServletResponse response)
        String ErrorStr = null;
        try{
         if(urlstr==null)
             urlstr = "c:\\video\\hoff.flv";
         File f = new File(urlstr);
         response.setContentType("video/x-flv");
        response.setHeader ("Content-Disposition", "filename=\"hoff.flv\"");
        Long fileSize = Long.valueOf(f.length());
        response.setContentLength(fileSize.intValue());
        InputStream in = new FileInputStream(f);
        ServletOutputStream outs = response.getOutputStream();
        int bit = 0;
        System.out.println("VIDEO STREAMER: start streaming data");
            while ((bit) != -1) {
                bit = in.read();
                outs.write(bit);
            in.close();
        System.out.println("STREAMER: Finished streaming data");
        outs.flush();
        outs.close();
        catch(Exception e){
                System.out.println("DEBUG: "+ e.toString());
}which works just fine, but as the server that will be using this code essentially just (90%) will be the use of this servlet to stream .flv files I want to make it more productive by buffering all or some of the file in order to stream.
so essentially I have tried many times and variations around the following sub code:
        InputStream in = new FileInputStream(f);
        ServletOutputStream outs = response.getOutputStream();
        int bit = 0;
        System.out.println("VIDEO STREAMER: start streaming data");
        byte buffer = new byte[fileSize.intValue()];
        outs.write(buffer);
            in.close();
        System.out.println("STREAMER: Finished streaming data");The above pump about 1MB of a 10MB fine, but the hangs and no exception is received, or:
        InputStream in = new FileInputStream(f);
        ServletOutputStream outs = response.getOutputStream();
        System.out.println("VIDEO STREAMER: start streaming data");
        byte buffer = new byte[fileSize.intValue()];
        for(int i=0; i<buffer.length; i++) {
             outs.write(buffer);
outs.write(buffer);
in.close();
System.out.println("STREAMER: Finished streaming data");
which will pump out around 2-6 MB of the file, with both of the code changes above I can see the file being pumped at a much faster rate, but obviously no good as it does not deliver the whole file.
I know that content length is fine, I have also tried varying the response.setBuffer(int) to larger than 8192 up to fileSize.intValue to allow a buffer to handle the whole file before outputing, all to no avail.
I have also increased the runtime RAM via '-Xmx64m'.
I am developing on a windows tomcat (with netbeans) and the production version is unix based.
Any help that anyone can offer will be greatly appreciated.

Thanks for the reply.
Hi, yes sorry has missed that (typed the other 2 variations by hand), I have tried buffering part of the file & tried using a BufferedOutputStream.
Neither worked either.
so for example, I used (done before, but hell tried again anyway):
        InputStream in = new FileInputStream(f);
        ServletOutputStream outs = response.getOutputStream();
        System.out.println("VIDEO STREAMER: start streaming data");
        BufferedOutputStream bout = new BufferedOutputStream(outs);
        byte [] buffer = new byte[1024];
        int length=0;
        while( (length = in.read(buffer,0,buffer.length)) > 0) {
            bout.write(buffer,0,length);
        }this actually does worse as I only receive around 500KB.
Checked the link you provided, useful but the implemented solution is still reading 1 byte at a time, hense far too many reads going on for when the server will be (hopefully) sending out a few files per min..
essentially it seems like the outputstream (whether raw or bufferedOutputStream) is having issues with pumping data that quickly to it !???!?!?
or it's not liking raw bytes and only really working with the bout.write(int) method, the best solution so far has been this use when I mentioned above that I would receive between 4-6 odd MB of the file, this was nice and fast, just never complete.

Wss3 Issues with user check in files from within excel or word 2010

I have got a user reporting that he is experiencing (and it is getting more and more often) that when a file is checked out in excel or word, he then edit it, followed by clicking check in on the File tab within either excel or word. He then gets error see
image below.
Just wonder if anyone has seen this before? and where do I start...?
i have checked the site collection is about 12 GB in size, there are quite a few subsites in the area where this user is working, there are about 150 subsites, 3 levels... our wss3 version is 12.0.0.4621

Yesterday I just had another user report the similar issue with with office complaining that the file was not checked out therefor upload (check-in) was failed.
Please see the version and build number of MS Office
Forgot to say, we are all on the same release and updates for MS Office as well as IE.

ACR 4.1 Issue - Lightroom Issue with Nikon D40x Raw Files

I am running Windows Vista and CS3 and am trying to process Nikon D40x raw files (NEFs) using ACR 4.1. The images come up properly in Bridge. However, when I try to add metadata using a metadata template, I get the error: "There was an error writing metadata to DSC_130.NEF." When I try to rotate an image in Bridge, I get the same error. If I try to do a Batch Rename, the name does not change. If I double-click on the image, it opens properly in ACR and the image can be rotated in ACR, and it then appears rotated in Bridge.
I also tried importing the D40x images in Lightroom. The following error appeared: "Problem Importing Files. The following files were not imported. The files appear to be unsupported or damaged."

Jeff,
I installed camera raw.8bi (size is 10,187kb)in
c:\Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats
I'm beginning to think this is a Windows Vista issue. I just installed ACR 4.1 on my XP laptop and it works fine. For both the Vista machine and the laptop, my raw files are on an external drive. If I move the raw files on the Vista machine from the external drive to the c: drive, there is no problem. I'm exploring whether there is some permissions issue in Vista that is not allowing me to write to the raw files if they are on an external drive. Ain't new operating systems just great fun!
Thanks!

Issue with MT940 ACK/NACK FILE

Hi Guys,
BANK->SWIFTNETGATEWAY(ACK/NACK Files)->SAP PI---->SAP ECC
The issue is regarding the ACKNOWLEDGEMENT/NACK files sent from back with respect to MT 101 files.
I am using FILE-PROXY scenario for this ( FILE SENDER ADAPTER---RECEIVER XI ADAPTER)
To read the sample ACK file i have used the module localejbs/swift/FINConversionFromSWIFTModule in sender file adapter. The sample file has multiple fields structure which is similar to SWIFT_FIN structure. But if you read the file using this module it will populate the data only for the 6 fields based on datatype SwiftMessage whose structure is different from SWIFT_FIN .Due to this data will not be populated in the mapping, so blank data is going to SAP ECC and its throwing error.
I have tried out all possible ways to use the modules provided in the configuration file but the file is read only with SwiftMessage structure and the standard mapping for ACK/NACK is provided with SWIFT_FIN structure as source and collectivePaymentOrderNotification as receiver structure.
I have explored and tried all the possible ways and got struck at this point of picking the file based on SWIFT_FIN structure, I request to let me know if there is any additional module available in the SWIFT integration package which will read the file based on SWIFT_FIN structure. Kindly suggest me with the valuable inputs.
Thanks,
Vishnu

Hi All,
Pls find Overview of SWIFT message structure.
The high-level structure of a SWIFT message is as follows:
Sample MT940 text File structure will be
I want to read this data and convert into XML file via SAP PI
Give me possible ways, how we need to convert the text file into xml file..
Regards,
Vishnu

F110 - Issue with creation of wire file

Hi Sap gurus,
May be someone could guide me through this issue. Iam using the payment program (F110) to pay the vendors. I have Bank 1 and Bank 2 which are used for wire Payments. The ranking order is 1 for Bank 1 and Bank 2 has ranking order 2. Business wants to use Bank 2 to pay for International vemdors.The variant in the RFFOM100 uses the house Bank of Bank 2 and its Account ID. When i run the payment program it pays the vendor from Bank 1 and also does not create the wire file as it should. How ever when i chnage the ranking of this Bank 2 to a 1 , it creates the right posting to right account and creates the wire file. What should I do if i had to pay with Bank2 and have the wire file generated? Do I have chnage the rankings all the time, or is it something iam missing.
Thanks
sapsri

Hi,
Ranking order is created for the combination of payment method and house bank.
In your case, create 2 payment methods for wire transfer and assing the different payment methods to the banks, with ranking order 1 for both.
Example: PAyment method "W" Ranking order "1" house bank 1000
Payment method "T" Ranking order "1" house bank 1100
This should resolve your issue

Issue with reading a xml file from xsl

Hi,
When I am trying to read a xml file from xsl, I am getting unwanted output.
Following is the XSL:
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
    <source type="XSD">
      <schema location="../xsd/B2BMarketProperties.xsd"/>
      <rootElement name="ReceipentIDType" namespace="http://www.example.org"/>
    </source>
</mapSources>
<mapTargets>
    <target type="XSD">
      <schema location="../xsd/B2BMarketProperties.xsd"/>
      <rootElement name="ReceipentIDType" namespace="http://www.example.org"/>
    </target>
</mapTargets>

?>
<xsl:stylesheet version="1.0"
                xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
                xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
                xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
                xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
                xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
                xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                xmlns:ns0="http://www.example.org"
                xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
                xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
                xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                xmlns:med="http://schemas.oracle.com/mediator/xpath"
                xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
                xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
                xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
                xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
                xmlns:xsd="http://www.w3.org/2001/XMLSchema"
                xmlns:ora="http://schemas.oracle.com/xpath/extension"
                xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
                xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
                exclude-result-prefixes="xsi xsl ns0 xsd bpws xp20 mhdr bpel oraext dvm hwf med ids bpm xdk xref ora socket ldap">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:variable name="ReceipentID" select="document('../xsd/B2BMarketProperties.xml')"/>
<xsl:template match="/">
    <ns0:ReceipentIDType>
    <xsl:for-each select="$ReceipentID">
      <ns0:ReceipentID>
        <xsl:value-of select="$ReceipentID"/>
      </ns0:ReceipentID>
      </xsl:for-each>
    </ns0:ReceipentIDType>
</xsl:template>
</xsl:stylesheet>
Following is the XML ( B2BMarketProperties.xml)
<?xml version="1.0" encoding="UTF-8" ?>
<ReceipentIDType xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                 xsi:schemaLocation="http://www.example.org B2BMarketProperties.xsd"
                 xmlns="http://www.example.org">
<ReceipentID>123</ReceipentID>
<ReceipentID>345</ReceipentID>
</ReceipentIDType>
The output i am getting with this code is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:ReceipentIDType xmlns:ns0="http://www.example.org">
    <ns0:ReceipentID>123345</ns0:ReceipentID>
</ns0:ReceipentIDType>
But, I need output in the following format
<ns0:ReceipentIDType xmlns:ns0="http://www.example.org">
    <ns0:ReceipentID>123</ns0:ReceipentID>
     <ns0:ReceipentID>345</ns0:ReceipentID>
</ns0:ReceipentIDType>
Could you guys let me know what i am doing wrong. Any help would be appreciated.
Thanks,

This worked for me :
<xsl:template match="/">
    <ns0:ReceipentIDType>
      <xsl:for-each select="document('B2BMarketProperties.xml')/*:ReceipentIDType/*:ReceipentID">
        <xsl:variable name="count" select="position()"/>
        <ns0:ReceipentID>
          <xsl:value-of select="document('B2BMarketProperties.xml')/*:ReceipentIDType/*:ReceipentID[$count]"/>
        </ns0:ReceipentID>
      </xsl:for-each>
    </ns0:ReceipentIDType>
</xsl:template>

Is there an issue with modifying a prototype file with a preinstall script?

Solaris Packaging content
I have a prototype file in which I need to move a specific directory to somewhere else other than the BASEDIR.
I am attempting to do this with a preinstall script by running my prototype file through sed and creating a new prototype file where specific entries that match the various regexp entries in the sed command now have a alternate path assigned to it.
For example:
Original prototype file entry:
d none <directory 1>/lib 0755 root other
Output prototype from preinstall execution:
d none <directory 1>/lib=<directory 2>/lib 0755 root other
However, even though I can go into /var/sadm/pkg/<PKG NAME>/install and execute the preinstall by hand properly, I get the following:
pkgadd: ERROR: preinstall script did not complete successfully
Any ideas here? Manually editing the prototype file before pkgmk and pkgtrans is not possible with how my package is being created due to an automated process, however I would really like to leverage the functionality of the prototype file for pkgrm's instead of moving them in a postinstall script and then removing each in a postremove script.

I don't see any issue in downloading the static copy. Even if you were allowed to connect to the wsdl directly or add it as a service reference in Visual Studio then you would have to manually update that reference. In closing, you aren't losing
any functionality by downloading the static copy.
Thanks,
Follow my FIM blog at: http://forefrontidm.wordpress.com/

Issue with faces-config.xml file

Hi,
I'm working on a project which needs more no. of JSF Pages and JSF Navigations,
But when i trying to creat pages more than 25 pages,the process becoming too slow,does this
effects the Application performance?Can any one suggest me why it happens and what are the
limitations for creating the JSF pages.
Does their any alternative to solve this Issue,I'm thing to create more faces-config.xml files as the
Jsf pages increases,does this solves?
Please suggest me.
Thank you,
Bandaru,

Hi Bandaru,
Are you trying to use the visual diagram option of faces-config? Coz i encountered difficulties when using it with many pages (more than 40) and the faces-config.oxd_faces was no longer able to support the diagram. "Solution" was to use only the overview and the sources of the faces-config. I don't know exactly but my problems were caused by the faces-config.oxd_faces and i don't think it affects performances for the application.
For information, that was on a Jdev 10.1.3.0.4
Regards,
Tif

Issue with polling files in File Adapter

Similar Messages

Maybe you are looking for