Issue with pop ups on Mobile Safari 5.1.4

Recently I've updated my Ipad through iOS 5.1 and when I tried to access my company web system, within the confirmation of the message to allow the popup to been loaded I've notice that if I tring to access the regular web address with the pop-up block disabled a web page blinks and the login page doesn't appear.
If I try to access the login's page dorectly the login's page open with no difficulty.
When I try to access in oldests versions of the mobile safary - like 4.3, I don't notice this behavior.
Could you provide any help for me?
Thanks in advance!

That's just the way that Safari works now. If you do not allow the pop ups - the page will blink as you have seen but it will not load.
I cannot remember what earlier versions of Safari used to do, but you have to set Safari to Block pop ups >Off.

Similar Messages

I think i've downloaded something bad affecting my web browsers. I keep on getting bumped to new tabs with "junk" sites. I'm having problems with pop-ups now too. HELP!

While on Safari, or Google Chrome and I click on a story or any where on the page for that matter, and I get bumped to a new tab with a junk site telling me to check my Mac or sign-up for streaming video. MacKeeper, Mac-Messages, Tuneupmymac, DetoxifymyMac, YourmediaHQ, Streamnowmovies, dtv4pc, etc. I also now have a problem with pop-ups which I didn't have before. While shopping on-line now I keep getting pop-ups giving me alternative prices on the same or similar items that I am browsing. I have my pop-up blocker activated, but these are still coming through. Is there any way to clean-up, fix, or block these sites that keep interfering with my internet time? IT'S MAKING ME CRAZY!

Click here and follow the instructions, or if desired, download and run Adware Medic. The second link is a direct download; if you're unable to download it, see this page.
(116018)

My mac has a virus yes I'm 100% sure it is one i get al kinds of pop ups only in safari though please guide me on how to reset it or where to go from here in detail new to macs

My mac has a virus yes I'm 100% sure it is one i get all kinds of pop ups only in safari though please guide me on how to reset it or where to go from here in detail im new to macs

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

By default, I leave pop-ups blocked in Safari, but, for some sites, I must allow them. How to do this? Is it possible?

By default, I leave pop-ups blocked in Safari, but, for some sites, I must allow them. How to do this? Is it possible?

Just un-check BLOCK POP-UP WINDOWS and reload the page.

I downloaded Yosemite and now I have lots of pop ups and my safari isn't working correctly. How do I remove Yosemite?

I downloaded Yosemite and now I have lots of pop ups and my safari isn't working correctly. How do I remove Yosemite?

Click here and follow the instructions, or if desired, run Adware Medic; the second link is a direct download.
(115459)

How to allow pop-ups in iPad Safari

How to allow pop-ups in iPad Safari?

Do you have an Exchange (e.g. a work) email account set up on the iPad ? If you do then it's possible that the account profile is preventing you turning popups 'on', in which case you would need to contact the email account administrator

What is going on with pop ups in Safari?

This has never happened to me in all the years of owning macs.... it's rather disturbing!
I've got a new intel iMac and believe since trying to install a 'player' in Safari to watch football online, I now seem to be plagued by pc style popups on all web pages, I don't know how to stop them... any ideas? I have installed the Safai Popup blocker, but without success.
Many thanks

Safari - Preferences - Extensions - Add the Ad Block extension. This will block pop ups.

Problems with pop-ups

Hi,
Recently I have been getting lots of pop-ups. This hasn't happened before and I think it might somehow be connected to the security update I received and downloaded from Apple a week or two ago. I get full-page ads opening behind the browser in their own window, 'gugle.com' and others, and on various sites I get messages about how my PC is under threat (even though I have a Mac), and today while surfing youtube I got a "hi" message with an OK button and the Safari icon. What gives? Can Macs now get adware, viruses, trojans, etc.? If so, is that what these are? How do I get rid of them? BTW, all pop-up blockers are enabled. Not sure if it is just Safari because it hasn't happened on Firefox yet.
Thanks!

on various sites I get messages about how my PC is under threat (even though I have a Mac)
No viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions.
That is 'scareware' trying to lure ignorant Windows users into downloading and installing malware. The sites you have visited have been hacked, and in the process you may have acquired a 'tracker cookie'.
More on that here:
http://news.bbc.co.uk/1/hi/technology/8313678.stm
Beware of PDF files from unknown sources. A security firm announced that by its counting, malicious Reader documents made up 80% of all exploits at the end of 2009.:
http://www.computerworld.com/s/article/9157438/RoguePDFs_account_for_80_of_all_exploits_saysresearcher
It is possible, however, to pass on a Windows virus to another Windows user, for example through an email attachment. To prevent this all you need is the free anti-virus utility ClamXav, which you can download for Tiger and Leopard from:
http://www.clamxav.com/
The new version for Snow Leopard is available here:
http://www.clamxav.com/index.php?page=v2beta
(Note: ClamAV adds a new user group to your Mac. That makes it a little more difficult to remove than some apps. You’ll find an uninstaller link in ClamXav’s FAQ page online.)
However, the appearance of Trojans and other malware that can possibly infect a Mac seems to be growing, but is a completely different issue to viruses.
If you allow a Trojan to be installed, the user's DNS records can be modified, redirecting incoming internet traffic through the attacker's servers, where it can be hijacked and injected with malicious websites and pornographic advertisements. The trojan also installs a watchdog process that ensures the victim's (that's you!) DNS records stay modified on a minute-by-minute basis.
You can read more about how, for example, the OSX/DNSChanger Trojan works here:
http://www.f-secure.com/v-descs/trojanosxdnschanger.shtml
SecureMac has introduced a free Trojan Detection Tool for Mac OS X. It's available here:
http://macscan.securemac.com/
The DNSChanger Removal Tool detects and removes spyware targeting Mac OS X and allows users to check to see if the trojan has been installed on their computer; if it has, the software helps to identify and remove the offending file. After a system reboot, the users' DNS records will be repaired.
(Note that a 30 day trial version of MacScan can be downloaded free of charge from:
http://macscan.securemac.com/buy/
and this can perform a complete scan of your entire hard disk. After 30 days free trial the cost is $29.99. The full version permits you to scan selected files and folders only, as well as the entire hard disk. It will detect (and delete if you ask it to) all 'tracker cookies' that switch you to web sites you did not want to go to.)

Browser preferences - web clip incompatible with pop-ups?

Hi,
I'm a newbie to iOS & Safari and I've haven't been able to work out the following:
I use a web-browser client app for work.
Since it is an app (with its own built-in navigation), I'd like to clear up space on my screen and use Safari in Full-Screen Mode.
I've therefore created what I believe is called a "Web Clip" (to add an icon with a direct link to the apps' login screen on my desktop/start screen).
When I double-click on this link, no Safari toolbar shows up (address box, navigation buttons, page tabs, etc.) so the interface is neat and has the feel of a standalone app.
However, a couple of functions stop working in this mode (they work fine in the "standard mode"):
I don't receive pop-ups (I'm able to launch reports against the server, which in turn is supposed to send back a PDF-file which should open in a new window or tab).
I can't use a click-on email-link to create a message (it's a simple mailto:x link).
I've searched all the configuration options I could think of but nothing solves this.
Can it be done?
If not, is there any way to "reduce" the space occupied by Safari's toolbar?
Thanks

I'm sorry Jim but I just wouldn't know where to start.
This is not a developer question, I'm just trying to configure the iPad appropriately.
Do you know if there is any configuration option on the iPad Air that "enables pop-ups" in Safari "full-screen mode"??

Issues with iMac freezing using Mail, Safari, Chrome

I'm having issues with my iMac freezing, forcing me to hard restart my computer each time. I think I've had to powered down via power button altleast a twenty times today and yesterday. I've restarted 4 times just trying to finish this post
It seemed like I was only freezing using Safari at websites like facebook and youtube.com. So I switched to Chrome, which lasted a few hours until I started freezing on that as well.
I logged on as a Guest account and they seemed to be working fine. I thought Flash may be the issue so I re-installed but no dice. I emptied cache, cleared history from each browser, etc -- no help.
Then today I started freezing just using mail. While typing a message, auto correct attempted to correct a word and my system completely locked up from that.
I have plenty of hard drive space, RAM isn't an issue either.
Here's some of my system log just before one of my recent freezes:
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: Glims Error: addChildrenOfBookmark:withTabLocation:toMenu:includeUnreadRSSCounts: not found. (unknown Safari internal)
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: Glims Error: _leftTextMargin not found. (unknown Safari internal)
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: Glims Error: BrowserWindowController load error (0) - Unknown Safari Internal
Mar 12 16:19:11 --- last message repeated 12 times ---
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: Glims loaded from: /Library/Application Support/Glims/PlugIns/Glims for Safari.plugin
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: -[BrowserDocument browserWindowController]: unrecognized selector sent to instance 0x7f9a6c00ecf0
Mar 12 16:19:11 Ronnies-iMac.local Safari[1744]: Glims Error: Can't reload session: -[BrowserDocument browserWindowController]: unrecognized selector sent to instance 0x7f9a6c00ecf0
Mar 12 16:19:23 Ronnies-iMac.local Safari[1744]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
Mar 12 16:19:27 --- last message repeated 2 times ---
Mar 12 16:19:27 Ronnies-iMac.local Safari[1744]: Glims Error: BrowserWindowController not found - Unknown Safari Internal
Mar 12 16:19:29 --- last message repeated 5 times ---
Mar 12 16:19:29 Ronnies-iMac.local Safari[1744]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
Mar 12 16:19:56 --- last message repeated 32 times ---
Mar 12 16:19:56 Ronnies-iMac.local WebProcess[1746]: objc[1746]: Object 0x7faa5b41c710 of class NSUserDefaults autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
Mar 12 16:20:20 Ronnies-iMac.local Safari[1744]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
Mar 12 16:20:34 --- last message repeated 5 times ---
Mar 12 16:20:34 Ronnies-iMac.local WebProcess[1746]: Unable to talk to lsboxd
Mar 12 16:20:35 Ronnies-iMac kernel[0]: Sandbox: sandboxd(1843) deny mach-lookup com.apple.coresymbolicationd
Mar 12 16:20:35 Ronnies-iMac.local Safari[1744]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
Mar 12 16:20:36 --- last message repeated 5 times ---
Mar 12 16:20:36 Ronnies-iMac.local sandboxd[1843] ([1746]): WebProcess(1746) deny mach-lookup com.apple.ls.boxd
Mar 12 16:20:39 Ronnies-iMac.local Safari[1744]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
Mar 12 16:21:09 --- last message repeated 11 times ---
I don't have much experience translating any of what I just pasted, any help would be greatly appreciated. Thank you!

I uninstalled the Glims plug-in on safari, and that's seemed to cure a little bit of the problem with safari. But I'm still getting hang-ups and freezes. I'm not even noticing a pattern anymore with which apps and so forth are causing it.
This is the log from a freeze that just occured at 22:59:
Mar 12 22:57:40 Ronnies-iMac.local mdworker[24584]: Unable to talk to lsboxd
Mar 12 22:57:40 Ronnies-iMac.local mdworker[24583]: Unable to talk to lsboxd
Mar 12 22:57:40 Ronnies-iMac.local sandboxd[24585] ([24584]): mdworker(24584) deny mach-lookup com.apple.ls.boxd
Mar 12 22:57:40 Ronnies-iMac.local sandboxd[24585] ([24583]): mdworker(24583) deny mach-lookup com.apple.ls.boxd
Mar 12 22:57:40 Ronnies-iMac kernel[0]: Sandbox: sandboxd(24585) deny mach-lookup com.apple.coresymbolicationd
Mar 12 23:00:22 Ronnies-iMac kernel[0]: disk0s2: I/O error.
Mar 12 23:00:22 Ronnies-iMac kernel[0]:
Mar 12 23:01:35 --- last message repeated 1 time ---
Mar 12 23:01:35 Ronnies-iMac kernel[0]: disk0s2: I/O error.
Mar 12 23:01:35 Ronnies-iMac kernel[0]:
Mar 12 23:01:36 --- last message repeated 1 time ---
Mar 12 23:01:35 Ronnies-iMac.local WindowServer[109]: CGXSetWindowTransformList: Invalid window 0x182
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: CGSSetWindowTransformsAtPlacement: Failed
Mar 12 23:01:35 Ronnies-iMac.local WindowServer[109]: CGXSetWindowTransform: Invalid window 0x182
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: CGSSetWindowTransformAtPlacement: Failed
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: find_shared_window: WID 386
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: CGSSetWindowListGlobalClipShape: Invalid window 0x182
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: find_shared_window: WID 386
Mar 12 23:01:35 Ronnies-iMac.local Dock[246]: CGSSetWindowListGlobalClipShape: Invalid window 0x182
Thanks again

How do you permanently (as long as possible) delete maleware pop ups on your safari-- that i know will eventually spread and attack my various computer files?? HELP HELP HELP! i haven't found a good enough solution!!

-1 Delete MALEWARE SOFTWARE through a safe apple or apple advertised rescue program
- 2 MONITOR/REJECT POP UPS on safari/google chrome
- 3 Have CONTROL OVER ADVERTISING YOU DO NOT WANT TO SEE- through using filter systems in a new anti pop up software too?
- 4 DOES A PROGRAM EXIST THAT DOES ANTI POP UP ADVERTISING AND MALEWARE FIGHTING??
- 5 I ABSOLUTELY HATE OF THIS HACKING! RUINS MY BELIEF IN APPLE, SAFARI AND INTERNET SAFTEY!! HELP!

The old rule of thumb was to keep 10-12 GB free. Any lower than that and you will start to have trouble. I was very close to that for a long time and never had any complaints. Now, Lion "encourages" 20% free space (on my newer 250 GB drive) so I try to keep it with more than 50 GB free.
Do you still have the original memory in that machine too? The metal plate you have to remove in the battery compartment also provides access to the RAM. Your machine will take 2 GB of RAM, possibly 3. You definitely want to max that out too.
Regardless, you definitely need a new hard drive. When Apple switched to PC components, they had to take a quality hit. These 2.5" notebook hard drives are not very reliable. I'm surprised your hard drive hasn't died by now. I usually get a new hard drive with every major OS upgrade. A $ 50 investment every couple of years is no big deal.
Unfortunately, you (and I) suffer from being an early adopter in 2006. Those 32-bit machines only accept 2 GB RAM (maybe 3) and are only 32-bit so they can't be upgraded to Lion. Because of this limitation, you won't see as dramatic an improvement as you would with a 2007 machine. If you run more than a couple of applications, your hard drive is always going to have to be doing some VM work. My 2006 machine has even lost its bluetooth. I gave it to my brother. My very similar 2007 Macbook is still running great.
So, you must get a new hard drive because your old one is likely on death's door. If you don't have at least 2 GB - get it. If you can't afford a new machine, you might want to consider an SSD. That might help mitigate your RAM limitations. You can spend from $ 100 to $ 350 and get a dramatic speed improvement.

Microsoft Dynamics CRM 2013 Google Chrome not populating popups working correctly with pop ups.

If incorrect forum, just alert and move. I am having an issue with hosted Microsoft Dynamics 2013 and Google Chrome latest release, 31. This just started with the hosted version of Dynamics CRM 2013, Chrome had been working correctly with
our earlier version of CRM.
When users on latest version of Chrome, 31, login to Dynamics CRM 2013, everything looks fine. Issue is specifically, for sales folks, when they open a client record, and where the client info is located, there is a standard date and time and tiny
little calendar you can pull up if you click on it. When the user clicks on the tiny little calendar, they DO get a pop up, but the pop up is blank. And, there is no error message at all. Nothing freezes, nothing bad happens at all, except
for the salesperson, who live and die by their calendars and ability to schedule appointments and see exiting appointments.
This is not some in house coding issue. It is a generic CRM phone call record that has this issue.
Again, no errors, nothing crashes, but Dynamics CRM 2013 is useless to Google Chrome users in house because of this. Which, in a support position, is terrible. Users who got an upgrade, have their favorite interface rendered useless. And these
are sales folks. And, I did all settings according to what I was able to find for CRM 2010 and Chrome, for when pop ups do not work, and all settings were already correct for pop ups, website is in trusted sites, etc, which is what I expected, since
everything worked on CRM 2010.
Any clues or ideas? Thank You.
Rick

We don't know. Better to ask over here.
https://community.dynamics.com/crm/f/117.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Your constanly hitting me with pop ups to download stuff you never did that befor

your constantly hitting me up for downloads for updateing browsers and anything you can think of i can't even read my emails i'm at the point where i just want to delete this entire browser---you never did this befor what the heck is going on not matter what settings i use i just get pop ups---pop ups and more pop ups what your problem

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Spam pop ups getting through Safari Pop blocker... WHY?

Recently a bunch of stuff is getting through safari blocker. Anyone know why this is happening?

Gary,
No pop-ups for me using Safari, with AdBlock.
;~)

Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072

I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop.
I am able to create the VPN connection but the connection will not allow data to be transferred.
Stats from a manual connection:
Cisco AnyConnect Secure Mobility Client Version 3.1.04072
VPN Stats
    Bytes Received: 14375
    Bytes Sent: 0
    Compressed Bytes Received: 0
    Compressed Bytes Sent: 0
    Compressed Packets Received: 0
    Compressed Packets Sent: 0
    Control Bytes Received: 0
    Control Bytes Sent: 0
    Control Packets Received: 0
    Control Packets Sent: 0
    Encrypted Bytes Received: 7820
    Encrypted Bytes Sent: 1207
    Encrypted Packets Received: 9
    Encrypted Packets Sent: 3
    Inbound Bypassed Packets: 0
    Inbound Discarded Packets: 0
    Outbound Bypassed Packets: 0
    Outbound Discarded Packets: 0
    Packets Received: 4
    Packets Sent: 0
    Time Connected: 00:03:01
Protocol Info
    Inactive Protocol
        Protocol Cipher: RSA_3DES_168_SHA1
        Protocol Compression: None
        Protocol State: Disconnected
        Protocol: DTLS
    Active Protocol
        Protocol Cipher: RSA_3DES_168_SHA1
        Protocol Compression: Deflate
        Protocol State: Connected
        Protocol: TLS
OS Version
    Windows 8 : WinNT 6.2.9200
Log from the data transmission software:
24/12/2013 12:51:13 - Application version = 1.11.28.0
24/12/2013 12:51:13 - Lodgement Library Version = 1.11.28.0
24/12/2013 12:51:13 - Connection Method = INTERNET
24/12/2013 12:51:13 - DIS Connection Type = Automatic
24/12/2013 12:51:13 - VPN Client = ACTIVE
24/12/2013 12:51:13 - Check Available Connections = NOT ACTIVE
24/12/2013 12:51:13 - Windows 8 (6.2.9200 SP )
24/12/2013 12:51:13 - Language: English (Australia)
24/12/2013 12:51:13 -
24/12/2013 12:51:13 - Connected to ISP via LAN
24/12/2013 12:51:13 - Checking for presence of VPN client.
24/12/2013 12:51:13 - VPN client found. (C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpncli.exe)
24/12/2013 12:51:13 - The Cisco AnyConnect Secure Mobility Client application is in use.
24/12/2013 12:51:18 - Terminating Cisco AnyConnect Secure Mobility Client in progress ...
24/12/2013 12:51:18 -
24/12/2013 12:51:18 - Checking Cisco AnyConnect version.
24/12/2013 12:51:19 - Cisco AnyConnect Secure Mobility Client (version 3.1.04072) .
24/12/2013 12:51:19 - Copyright (c) 2004 - 2013 Cisco Systems, Inc. All Rights Reserved.
24/12/2013 12:51:19 - Config file directory:C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\
24/12/2013 12:51:19 -
24/12/2013 12:51:19 - Loading profile:C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\ELS-IMelAde-TCP.xml
24/12/2013 12:51:19 -
24/12/2013 12:51:19 - Initializing the VPN connection.
24/12/2013 12:51:19 - Ready to connect.
24/12/2013 12:51:19 - Ready to connect.
24/12/2013 12:51:19 - Contacting ELS-IMelAde-TCP.
24/12/2013 12:51:23 - Authenticating user.
24/12/2013 12:51:23 - Connected to VPN concentrator.
24/12/2013 12:51:23 - Establishing VPN session...
24/12/2013 12:51:23 - Checking for profile updates...
24/12/2013 12:51:23 - Checking for product updates...
24/12/2013 12:51:23 - Checking for customization updates...
24/12/2013 12:51:23 - Performing any required updates...
24/12/2013 12:51:23 - Establishing VPN session...
24/12/2013 12:51:23 - Establishing VPN - Initiating connection...
24/12/2013 12:51:24 - Establishing VPN - Examining system...
24/12/2013 12:51:24 - Establishing VPN - Activating VPN adapter...
24/12/2013 12:51:24 - Establishing VPN - Configuring system...
24/12/2013 12:51:24 - Establishing VPN...
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connected to ELS-IMelAde-TCP.
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connection to VPN client return code = 0.
24/12/2013 12:51:24 - Connected to VPN concentrator.
24/12/2013 12:51:24 - Connecting : Connecting to 203.202.43.2.
24/12/2013 12:51:45 - Error in ConnectToDIS - Socket Error # 10060
Connection timed out.
24/12/2013 12:51:46 -
24/12/2013 12:51:46 - Disconnecting from the VPN concentrator.
24/12/2013 12:51:46 - Disconnect in progress, please wait...
24/12/2013 12:51:46 - Detaching AnyConnect, please wait...
24/12/2013 12:51:47 - Detached.
24/12/2013 12:51:47 - Disconnected from VPN concentrator.
24/12/2013 12:51:47 - *****************************************************
24/12/2013 12:51:47 -               END OF LODGEMENT PROCESS
24/12/2013 12:51:47 - *****************************************************
Issue history:
- Previously running Cisco VPN client on Windows 8 64 bit laptop (VPN working and able to transmit data over VPN)
- Upgrade to Windows 8.1 stopped the VPN client working
- Refreshed system back to Windows 8 and reinstalled all software
- Cisco VPN client would not install on system
- Cisco AnyConnect Secure Mobility Client installs and is able to connect to VPN host
- Cisco AnyConnect Secure Mobility Client downloads and installs software from VPN host
- Data transmission software returns error code #10060
Any assistance would be greatly appreciated.

anyone found the fix for this?

Issue with pop ups on Mobile Safari 5.1.4

Similar Messages

Maybe you are looking for