Issue with post migration, from 11.1.1.1.3 to 11.1.1.1.5

Hi,
We are facing issues post migration issue in 11.1.1.1.5.
We are using JMS adapter with 3rd party Queues (IBM MQ). We are able to produce and consume the messages in 11.1.1.1.3. But, post migration to 11.1.1.1.5, we are able to only prouce the messages and not able to consume the same.
We use JMS message id as Correlation id.
Please assist us on this.
Thanks!

and not able to consume the same.Do you see any error in log? Paste the error info here. Alternatively, you may log a SR with support.
Regards,
Anuj

Similar Messages

Trouble with Post Migration Scripts

I try to run the volrepair script but am getting errors. I have run the Update NDS option from nssmu but still now luck.
ccs_fs1:~ # /opt/novell/migration/sbin/serveridswap/scripts/repair/volrepair.rb -a admin.ccboe -p darabc -f /var/opt/novell/migration/
Information: Checking NSS status ...
Information: Getting GUID for NSS Pool ADMIN
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_ADMIN_POOL)(objectClass=nssfsPool)) " "g uid" -W
Error: Failed to get guid for pool ADMIN
Information: Getting GUID for NSS Pool APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_APPS_POOL)(objectClass=nssfsPoo l))" "gu id" -W
Error: Failed to get guid for pool APPS
Information: Getting GUID for NSS Pool SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_SYS_POOL)(objectClass=nssfsPool ))" "gui d" -W
Error: Failed to get guid for pool SYS
Information: Getting GUID for Volume APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_APPS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume APPS
Information: Getting GUID for Volume SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_SYS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume SYS
Information: Updated NSS Pool objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Information: Updated NSS volume objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Warning: The following NSS Pools does not exist on the source server. Use "nssmu " option "Update NDS" for these Pools to repair.
Warning: ADMIN
Warning: APPS
Warning: SYS
Warning: The following NSS Volumes does not exist on the source server. Use "nss mu" option "Update NDS" for these Volumes to repair.
Warning: APPS
Warning: SYS

$(UYou need to have the same set of pools and volumes on the source server and target server (atleast the names should be identical).
The error says the pools or volumes that exists on the target server doesn't match with those on the source server.
Try updating them from nssmu or iManager.
Refer section "9.0 Preparing for Transfer ID -> 9.1. Prerequisites " of http://www.novell.com/documentation/....html#bookinfo
-Ramesh
>>>
From:
dmilam<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
05/03/2010 11:06 PM
Subject:
Trouble with Post Migration Scripts
I try to run the volrepair script but am getting errors. I have run the
Update NDS option from nssmu but still now luck.
ccs_fs1:~ #
/opt/novell/migration/sbin/serveridswap/scripts/repair/volrepair.rb -a
admin.ccboe -p darabc -f /var/opt/novell/migration/
Information: Checking NSS status ...
Information: Getting GUID for NSS Pool ADMIN
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_ADMIN_POOL)(objectClass=nssfsPool)) " "g uid" -W
Error: Failed to get guid for pool ADMIN
Information: Getting GUID for NSS Pool APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 ..6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_APPS_POOL)(objectClass=nssfsPoo l))" "gu id" -W
Error: Failed to get guid for pool APPS
Information: Getting GUID for NSS Pool SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_SYS_POOL)(objectClass=nssfsPool ))" "gui d" -W
Error: Failed to get guid for pool SYS
Information: Getting GUID for Volume APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_APPS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume APPS
Information: Getting GUID for Volume SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_SYS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume SYS
Information: Updated NSS Pool objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Information: Updated NSS volume objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Warning:The following NSS Pools does not exist on the source server.
Use "nssmu " option "Update NDS" for these Pools to repair.
Warning: ADMIN
Warning: APPS
Warning: SYS
Warning: The following NSS Volumes does not exist on the source server.
Use "nss mu" option "Update NDS" for these Volumes to repair.
Warning: APPS
Warning: SYS
dmilam
dmilam's Profile: http://forums.novell.com/member.php?userid=11991
View this thread: http://forums.novell.com/showthread.php?t=409414

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

Issues with RAW files from my 7D

I have Aperture 1.5.6 on my computer and the software updater says that is the current version. I shoot with a 20D and a 7D. I upload my raw files to Aperture and edit them from there and then process for a jpeg. However, every time I upload a raw file from my 7D I get the following message when I click on it to edit it: Unsupported Image format.
Any words of advice, other than just buy Aperture 3??

I have Aperture 2.X and had zero issues with RAW files from a 7D, so I think the problem is you are on 1.X. Converting to DNG first was a good suggestion if you don't want to purchase 3.X. Yet another reason to hate proprietary raw image file formats.......

Any issue with posting?

One of our forum member has some issues with posting (user594038 - http://forums.oracle.com/forums/thread.jspa?threadID=704022&tstart=0)
Do you have that pb also?
Please note that this is a test of posting, please just respond that you have the same issue.
Thanks to help us.

Hello,
for the datasource to extract any kind of postings you'll have to have 5 things checked in the isu system:
MENGESTREL
BETRSTREL
STAFO
STGRAMT
STGRQNT
The only relevant postings are the ones that have the BUCHREL field marked.
Cheers,
Sorin

Starnge issue with posting periods

Hi All,
I am facing a strange issue with posting periods....
When I go to OMSY i can see that periods 10 & 9 are open. the I go to MMPV and close periods. Again when I go back into OMSY I can see that now periods 11 & 10 are open. But after sometime when I try to do invoice posting I get the error that posting only possible in periods 10 & 9. I checked in OMSY and it now shows that periods 10 & 9 are open!!
I have closed periods using MMPV atleast 5 times now....I really fail to understand why or how the periods are changing in OMSY?
Regards,
V S

Hi,
Check in MARV table, if it is still open, while close the period in MMPV, check you are getting message as "Period closed log issued"
Regards,
Prabu

Issue with EVDRE migration

Dear BPC Experts,
We are migrating our environment from BPC 7.5 to BPC 10.
We are in process of migrating our report, however, we have observed that post migration the changes/modification perform on the migrated report are not saved on the server folder with same file name (overwrite).
Hence, we have to save the report/input form with different name, each time we make any modification to it and then only changes are saved.
For example, after migration first we make changes to formatting and saved the report and close it. After that we find that 1 formatting style is missing, so we open the same report and do the changes and save it. The changes performed 2nd time are not available when we open that report from server folder.
However, changes are available if we store the file with different name. The changes we perform 1st time and 2nd time, both are available.
We are on SP 14 Patch 3 of EPM Add-in.
Your help is highly appreciated.
BR,
Ashwin.

Hi Ashwin,
You may open a new folder on "server root folder" and save your new files there. After migrating each report you can upload there and change your old folder name as (Backup,etc) and change your new folder name with the old one. Thats how i solved this issue.
Also you need to migrate from here:EPM>MORE>EVDRE MIGRATION for each report.
Regards,
Yigitalp

Post Migration from SP2010 -Attach File Button not working in any list new/edit forms

Hi,
We have migrated the SharePoint 2010 farm to Sharepoint 2013 on last saturday and we are noticing an interesting issue after the migration .
On any custom list on any web application ,When we create a new item,if we click on attach file button in the ribbon,nothing shows up on the screen.
In the browser Dev Tools its showing an error message as "Cannot read Property style of null".
This is happening on a javascript (form.debug.js) on line No : 5276
(document.getElementById("partAttachment")).style.display = "block";
There is no element rendered in html with id "partAttachment",which is causing this error to happen.
Solutions tried are
1) Modified the List Advanced Settings to disable and enable the attachments ,which did not work
2) Ran the Sharepoint Configuration wizard which did not fix
3)Tried reset the site definition for all pages in the site from site settings
4) Deactivated and activated all the activated features in the site collection
Its an OOB List New Form,no customizations has been done.
Similar error occurring with List Edit form as well
when you click on the List Item in the List default view when you navigate to the list and when you click on attach file,a popup dialog to upload attachments appearing,However its not working when you
navigate into the list item and tried to upload attachment.
Please help if any Solutions / thoughts

Hi Christopher,
Thanks for your reply,
Farm Information
OS: Windows Server 2008 R2 SP1 Enterprise
SQL: SQL 2008 R2 SP2
SP -SharePoint 2013 with no CU applied
Method,we used is restored the content DB from SP2010 and attaching to SP2013 SQL Server
Site Collection is in 15 mode
It happens on new site collection even though its not migrated site.
Server is 16GB RAM 8Core Processor
If we create a new form from designer,attach file link is working
OOB New form.aspx is having List Form webpart
Custom New Form.aspx creaed with designer has data form webpart
if we create a new sharpoint site collection in 2010 mode,its working fine without any issues
Interestingly,all the javascript files loading were debug.js,Not sure how its loading all debug.js files

Problems with posting iDocs from MDM in SAP R3

Hi,
I am an MDM consultant, with limited knowledge about SAP R3.
We send material master data from MDM, via PI to R3 using iDocs.
We are having problems with posting MATMAS, and it seems the problems are with updating already existing materials.
In BD87 we get the following warnings:
The field MARA-ERVOE is not ready for input and was therefore not initialized
The field MARA-ERVOL is not ready for input and was therefore not initialized
The field MARA-FERTH is not ready for input and was therefore not initialized
The field MARA-KZGVH is not ready for input and was therefore not initialized
The field MARA-XCHPF is not ready for input and was therefore not initialized
With the last message being:
No changes made
I have checked the MDM syndicator, and none of these idoc-fields are linked to the MDM repository.
So they are syndicated blank.
If we try to resend the material, it is again stopped and in BD87 I see the same messages.
Please help me understanding how to solve these issues.
Thanks,
Thomas

Hi,
Please refer the below threads which talks about the similar problem
http://scn.sap.com/thread/3180116
http://scn.sap.com/thread/1374222
Generally the basic view of the material to be created first. Then the sales, purchasing and other views to be created.
There are few fields in the other views which gets values from the basic data view.
Regards,
Antony

Issue with transfering items from punch out

Hi All,
We are using a punch out for ordering shopping carts. It is working fine for all the users but not for one of the user. That user is able to open punch out site in her system and able to select the items in that punch out. But when she clicked on "checkout" button in that site, it is not transferring the items to the shopping cart. Rather it give internet explorer error" Page cannot be displayed". I believe, this is not a punch out or SRM issue. It should be an issue with the user's system settings.
But I am not sure where to check? Is it something that the cookies need to be enabled in user's system? Could you please help me with your suggestions?
Thanks,
SS

Hi,
You could perform a HTTP trace (using HTTP watch) and compare the OCI data in POST method for both users (the correct and incorrect ones).
Perhaps there is some additional/missing information being passed from catalog to SRM.
Kind regards,
Ricardo

Issues with .mov files from Canon 5d mk3 - since Mavericks upgrade...

Hello,
Ever since I upgraded my OS to Mavericks, Premier Pro has been refusing to 'see' .mov files in my projects. In the timeline the bits of .mov footage are appearing as red blocks, in the preview pane you get 'Awaiting media' then the red block of doom.
So currently I'm having to convert footage from .mov to mp4v - then it seems to be OK. The upgrading to Mavericks could be a coincidence ... but before that I had no issues with PP.
This is my system:
Processor 2.8 GHz Intel Core i5
OS X 10.9.1 (13B42)
Graphics ATI Radeon HD 5750 1024 MB
Memory 12 GB 1333 MHz DDR3
I would love some help/ideas on this - it's doing my head in having to convert .mov files, and having to back convert stuff in my existing projects ... please help!
Best - Abbottssnapper
[Text formatting corrected. Please type your posts into the browser, as copy/paste often leaves unwanted code.]
Message was edited by: Jim Simon

>Ever since I upgraded my OS to Mavericks
Adobe/Jive have a BAD title for the SEARCH THIS FORUM function
Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
maverick
or
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Encoding issue with pages serving from Linux Apache to Firefox

Hi,
I had a problem last year where my help files displayed as a blank page with a question mark when they were served from a Linux Apache Server to Firefox. All other browsers displayed the content perfectly fine.
I discovered that the issue had something to do with encoding. From what I understood at the time: RH 8 outputs in UTF-8 but Apache prefers UTF-16 so it tries to modify the page. Net result: Firefox can't interpret the page. I apologise if my description is terrible I never fully got my head around the issue.
To cut a long story short: I was able to fix this by chaging the encoding information at the top of each page from <?xml version="1.0" encoding="utf-8" ?> to <?xml version="1.0" encoding="utf-16" ?>
My client has produced a new version of their software this year and for some reason my Help doesn't work again, even with modified encoding information. I am assured that the Apache web server has not changed.
Does anybody have any suggestion?
Many thanks,
Alex

I think this is what I posted last year.
This is what I was
advised by the company hosting my site.
"I would therefore
conclude that the solution to this problem (on Linux systems running Apache) is
to add the AddDefaultCharset utf-8 directive to either the Apache config or the
site .htaccess file. The advantage of the latter is that it only affects individual
sites. The default Apache character set is taken from the locale file on Linux
and defaults to iso-8859-1. It is the conflict between the Apache header with
iso-8859-1 and the page character set of utf-8 that obviously causes Firefox a
problem."
In a forum post
Chrissy_Tissy added
My machine is
Windows, but this fix still worked -
some notes about making the fix visible:
1. Do the fix itself
(httpd.conf: AddDefaultCharset utf-8).
2. Restart the box
to apply the fix.
3. Once the box is
restarted, clear your cache in FireFox to make sure you don't continue to see
the cached file.
Once all this is
done you will see the output content as expected.
There is a tool to change the encoding but that does nothing more than you have already done. Maybe showing your client the above will persuade them to change things at their end.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Issue with Agent Profile from AM 70 OpenSSO interesting issue

Hi All,
I have a specific scenario and if it is not possible then ugrade from AM 7.0 to OpenSSO cant be true.
I have issue with the agent profiles (BTW I am not doing upgrade from AM 7.0 to OpenSSO but its a fresh OpenSSO install)
In AM 7.0 Agent profile is like this (below is the exact export from the AM 7.0)
dn: uid=Test-Agent,ou=agents,o=am
sunIdentityServerDeviceStatus: Active
uid: Test-Agent
objectClass: sunIdentityServerDevice
objectClass: iplanet-am-user-service
objectClass: top
objectClass: iPlanetPreferences
sunIdentityServerDeviceType: Agent
cn: default
sunIdentityServerDeviceVersion: 2.2
userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
Below is exact import into the OpenSSO (I created this LDIF using my script)
dn: ou=Test-Agent,ou=default,ou=OrganizationConfig,ou=1.0,ou=AgentService,ou=services,o=am
ou: Test-Agent
sunsmspriority: 0
sunserviceID: 2.2_Agent
sunKeyValue: sunIdentityServerDeviceStatus=Active
sunKeyValue: sunIdentityServerDeviceKeyValue=
sunKeyValue: description=
objectClass: sunServiceComponent
objectClass: top
sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
Now you can see the issue in AM 7.0 the password is stored as "userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" where by directory server userpassword is SSHA encrypted VS in opensso it is "sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" which OpenSSO doesnt like .. :)
If i create a Agent from the opensso Console then Agent create a password using AES encryption and and that works fine even when I import my above LDIF and update the password using the OpenSSO console it also works. The issues I have this I dont know all of the Agent clear text password and I only have the LDIF to work with. Any thought !! Please let me know I am stating to believe that the upgrade from AM 7.0 to OepnSSO will have the same issue which i have not tried yet.
Anythoughts or ideas are very welcome !
-Haris

Configuring the agent like this, ie importing a ldif file is not supported and can lead to unexpected results as you have observed. Just do it in a supported way and change the password for the agent if you don't know it. As the administrator you are supposed to know the password or have the power to reset it.

Issue with a load from R3 to BW 3.5

Hi Guys,
We are having an issue here with a load from R3 to BW 3.5 to an ODS and
a transactional infocube.
In a daily basis we are running loads to BW from R/3 infosets and all
of them but one loads fine.
The one that is having problems is actually the one that loads more
data, therefore the infopackage is divided into two infopackages.
In the update rule of the first ODS we are running an initial routine
in which we are doing a RSDRD_SEL_DELETION (selective deletion) of the
data to be loaded to both the ODS and the infocube, and is actually
here where we got the core dump.
Our first assumption was that maybe there was any yellow request in the
transactional infocube avoiding the selective deletion but we have
discarded this.
We think that, as the only one failing is the one that divides into two
infopackages, the problem might be that at the moment that the first is
triying to delete the second one is loading data into the ods and there
we get the dump.
The question here is ¿Could this be the problem? ¿How could we
workaround this if this is the case?
Thanks for any suggestion.

Hi,
Be carefull on ODS activation, if you're using 2 infopackage and/or deleting data from an ODS which is lock for an activation, you'll occurs a dump.
Check SM12 / ST22 / SM21 and job logs in SM37.
And if pb still occurs for a load, debug it in start routine.
Regards,

Issue with file download from BLOB type data

i have been using this for a while, with no problems, including on hosted machines.
the upload to the database works fine.. not the issue, and the download script also works fine, on the local WAMP machine.
but once moved to the server it fails.. the query does not work.
i have a feeling that it is something to do with the managed hosting i am using, but they say no, i have tried it on 2 seperate hosted machines (different providers), with no joy.
if i run the select query on the hoisting server via phpmyadmin, the query runs ok.
any suggestions as to what may be causing the problem on the server compared to the local WAMP machine?
i really don't know where to start looking, or where to point the hosting company.
This is the php code to download the blob data, works fine on local WAMP setup, browser asks if you want to save the file/open etc. as expected.
<?php require_once('Connections/connTracker.php'); ?>
<?php
// if id is set then get the file with the id from database
if(isset($_GET['docindex']))
           {$id    = $_GET['docindex'];
        $query = "SELECT document_name, document_type, document_size, document_content " .
           "FROM tracker_documents WHERE document_index = ".$id;
*** seems to be failing here when running the query ***
$result = mysql_query($query) or die('Error, query failed');
           list($name, $type, $size, $content) = mysql_fetch_array($result);
     header("Cache-Control: maxage=1"); //In seconds
   header("Pragma: public");
     header("Content-length: $size");
           header("Content-type: $type");
           header("Content-Disposition: attachment; filename=$name");
           echo html_entity_decode ($content);}
exit;
?>

Hi Gun,
You are the only one responded to my issue. I have allocated some points.
Yes. I have checked the assignment in CRM organizational model.
I did download the org. structure from ECC 5.0
All objects including sales offices are activated for determination and I have verified with green light
As per your suggestion if the sales area data is not matched between the two systems, then how come the error will not reappear during the bdoc reprocess?
What is missing during the first time bdoc process? Looks something is missing for validation module?
Any inputs?
Thanks,
Raj

Issue with post migration, from 11.1.1.1.3 to 11.1.1.1.5

Similar Messages

Maybe you are looking for