Issue with posting change note processing using movement type 309

while processing Posting change note using transaction LT05, i am getting error 'Available quantity is less than selected quantity'. we need the quantity in posting change note to be picked from same storage bin from where it has been picked during transfer posting using 309. currently, it is showing all storage bins in ascending order for selection while Posting change note posting.
if we reqwhile mass porcessing of Posting change note using LSMW, it pickes the 1st storage bin. if 1st storage bin quantity is less than selected quantity of PCN then it is showing above error.

Hi Vishal,
                  The materials are managed by batch? Please check the batches of the material in the different storage bins. SAP asign the storage bin taking into account the material batch number and the oldest quant.
When the storage bin is not indicated, SAP looks at the batch number, and goes to the storage bin where this batch for the material is allocated. If SAP find more than one storage bin, SAP consumes from the batch that has the oldest quant.
I really dont understand deeply your question.
Hope it helps.
Regards
Enzo

Similar Messages

  • Restriction to use mov type 309

    Hi,
    I need to restrict  some of users not to use mov type 309 only, other mov type they need to use, in that case how to do ??
    I knew the object (object name -authorization object is M_MSEG_BWA)  pls tell me the steps?

    Dear Jayakumar,
    While creating the roles using T Code PFCG,after adding the T code MB1B under any role,ask your Basis consultant to look for
    this authorization object M_MSEG_BWA,and dont include the check box for 309 movement and include it for the other
    movement's like 311,312 etc.
    So whatever role that's allowing MB1B should be checked so that it 's not having the authorization for 309 movement.
    Check and revert back.
    Regards
    Mangalraj.S

  • Change the behavior for movement type 309 - Account post PRD

    Dear friends ,
    We need to transfer material to material using movement type 309.
    These material are using price control "S".
    When we transfer from material A to material B the price difference stay stopped in the PRD account.
    We need to revaluate the material B automatically and not let the price difference stopped in the PRD... when we run the Material Costs..via Material ledger.
    Does anyone knows a way to change this behavior ?
    best regards,
    Alessandro

    Dear Revi thanks for your answer !
    One more thing...
    We cannot change the valuation from S to V in the material B.
    Regarding the PRD postings... when the Controlling team runs the Material Ledger the price for material B should be changed/updated automatically, Am I right ?
    And then the PRD account must be cleared...
    Or I continue to do the MR22 manuall...or better... create an Abap program to run automatically clearing the PRD posting agains't the material via MR22 to correct the cost of this material.
    thanks once more.
    Ale

  • Material to Material Transfer using Movement Type 309

    Hi,
    We have activated the material ledger.
    Issues:
    When we transfer material A to Material B using Movement Type 309 the price difference from Material A was not allocated to Material B after executing CKMLCP.
    But the another company who using the materail to material transfer, the price difference was allocated to receiving material.

    Hi,
    Please check SAP Note 167722 to able to do multi-level price determination for material transfer with using modification.
    best regards, Takashi

  • Adobe Acrobat Distiller Process. Issue with Font(L0420P not found, using courier)

    Hi Everybody,
    We are working for upgrade activities, which involves moving applications from Windows 2000 to Windows 2003 Servers.
    My applications uses Adobe Acrobat distiller, which is also getting upgraded along with the server from Adobe 4.0 to 5.0 (Installed licensed Adobe distiller).
    I have been using Adobe distiller to convert .PS files into .PDF files. The conversion process requires the PSFonts such as (MB006, L0B, L0420P etc..), each font got a separate PFB and PFM extension files, which are kept in the folder name called "Psfonts" and has been included in "Font location" under Distiller settings.
    Using Distiller( Adobe Acrobat distiller 4.0 ) in Windows 2000 didn't create any issues or error while converting .PS files into .PDF files, all the PDF files are generated by Distiller as expected and process without any Font issues.
    In Windows Server 2003, I installed Adobe Acrobat distiller 5.0 and moved the Font Folder "Psfonts" from older server(Windows 2000 server) to the new server(Windows 2003) and started Adobe Acrobat distiller process(5.0) to convert .PS to .PDF, most of the .PS files gets converted into .PDF files but when .PS files which require the Font L0420P comes in for Distilling, it displays an error message as "L0420P not found, using courier".
    I checked with the old Server's (Windows 2000) font folder (Psfonts), it has the same files(PFB and PFM) as present in the new Server(Windows 2003).
    I tried to check the Particular Font name(L0420P) in Distiller-->Setting-->Job options-->Font-->Embedding-->Psfonts, but L0420P font alone is missing in the List.
    Could you please help in resolving this Font issue.

    You may like to try deleting the PsFonts entry from distiller and closing it. Restart the machine, make the entry of PSFonts agina and try creating PDF.

  • Stock Transfer using movement type 309 of in-transit material

    Hi Gurus,
    We have a scenario where we want to post a 309 movement type on an intransit STO stock (sto is done from PWO, this is done to solve a SOX compliance problem). But it seems that this is not possible as the 309 can not be posted without a s. loc. Is there any alternative to this? Can a two step transfer using 313 and 315 do the trick? Please advise.
    Thanks

    In real life you cannot do anything to a material that is somewhere on the road, hence it is pretty limited what you can do in SAP.
    What exactly do you want to do?

  • Transfer posting mov type 309

    Dear friends,
    Please help me in following scenario,
    In MIGO, I want to do transfer posting from one material to another .using mov. type 309.
    My problem is that, my destination material batch number is comming same as sender material batch number. I want system to automatically create new internal batch number for destination material.
    Please guide.
    Regards,
    Amit Shirsath

    Dear Madam,
    I have done the same using MB11, but i am not able to do the same with MIGO, and my clients requirement is to do with MIGO only..
    Regards,
    Amit Shirsath

  • Limiting users to select articles from movement type 309- SAP retail

    Hi experts,
    My client wants to restriction on limiting users selecting articles from movement type 309 in SAP retail. They need an option to predefine article list which can allows users to transfer articles using movement type 309. Is any standard way to accomplish this requirement or whether it s need ABAP development.
    Thank You & Best Regards
    Sameera

    this BAPI just creates movements, you access your Z-tables from the ABAP that calls this BAPI, isn't it?
    But in the exit EXIT_SAPMM07M_001  you can program to read the Z-tables and do the necessary steps to restrict the usage, hence you can use the standard transactions for the movements without needing an extra program that calls a BAPI.

  • Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Hello surig84,
    Thank you for providing the details of the issue you are experiencing when syncing your iPad.  I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
    /Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
    Now launch InDesign and see if the problems are resolved.
    If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
    Let me know if any of these suggestions work for you
    I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

  • Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source?  Now that I'm on iOS 7, I either charge or use... Not both.

    Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source?  Now that I'm on iOS 7, I either charge or use... Not both.

    No problems here.
    Edit...
    My IOS-7 is on an iPod Touch.

  • We have been having some issues with Email notifications not going out and getting hung up in SOST.  Can anyone please tell me whether we can use Solution Manager to monitor outbound emails?

    We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?

    What version of Solman are you using ?  Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1  else in 7.01 you use auto reaction methods to monitor .
    Regards
    Jay

  • Sales Returns Stock posting using movement type 651

    Hi Experts,
    I want to upload the sales returns stock using movement type 651. Because, our existing company code 'xxxx' has been changed to 'zzzz' and all the stocks, balances and so on has been uploaded and carry forwarded to new company code 'zzzz'.
    Now, I stuck with the customer/sales returns stock. Also, I know that there is no accounting effects with the movement type 651 i.e., blocked stock stored in customer rejection storage location.
    I have tried lot but I didn't get the solution for the same.
    Kindly share some ideas to upload the sales returns stock.
    Anandkumar KS

    Dear Experts,
    First of all, sorry for late reply.
    I tried using the movement type 655, but i can't able to post the stock.
    Is there any other way to post the stock in customer rejection storage location with the movement type 655?
    Also, it should not create any Accounting Document while posting the stock.
    Please advice me in this issue.
    Anandkumar KS

  • Posting with MM Movement Type 309 material to material: Error in WM

    Hello,
    i post an MM-Movement type (Bewegungsart) 309 (material to material).
    The MM-goods movement works, but then in warehouse mangagement there is a problem:
    The creation of the transfer order (Transportauftrag) stops in many cases.
    The aim is to post Material A to the same storage bin in Warehouse Management where Material B was before.
    I programmed this in user-exit (ZXLToU03) that by movement type 309, always taking same storage bin. But then I often get the error: transfer order could not be created. Then I have to do the creation of tranfer order in foreground and then I get an error like this:
    capacity of the bin location is not enough.
    The Problem is that I do a posting for example:
    001 010101                   to     922 Umbuchungzone    -->  Transfer order Pos 1
    922 Umbuchungszone  to    001 010101                    --> Transfer order Pos 2.
    And so the first transfer order position is not confirmed when I do the transfer order Pos 2.
    How can I confirm Pos 1 by batch-input? The Programm to do 309 should posting 1000 materials in one step. But in Warehouse management I get those problems?
    Is it possible to increase the capacitiy of the storage bin and then decrease it after creation of transfer order(where can I do this and when)???
    I hope anybody can help me.
    Thanks.

    Hello Kevin,
    I donu2019t think it is necessary to use a user exit to keep the Material B (that is transferred from Material A) in the same bin.
    This can be controlled in the customizing: indicator Post to same bin, that can be set in the WM Movement type (V_T333-KZUAP) and in the Storage type (V_T3010-KZUAP).
    Now I donu2019t know your business process but I am surprised that Material B requires more space than Material A since it is u2018bornu2019 by means of a transfer posting and not a production or packing step that makes it bigger in terms of capacity required.
    A workaround for this could be to transfer (LT10) Material A first to a separate Storage type (with the Post to same bin-flag set) that has no Capacity check and after the 309 posting transfer it back into the warehouse with LT10.
    Success and thanks beforehand for any credits!
    Kind regards,
    Bart

  • Issue with PO change output - Service line items

    Hi All,
    This is issue with PO change output. We have PO with line item 10, 20 and item 10 has 4 service line items. PO is approved and initial print out is taken.
    Some one goes and makes changes to 1st service line items of PO line item 10.
    A change output gets triggered. When this output is printed, it prints line item 10 details. This is standard functionality as this item is changed. But its printing all the service line items for this PO line item. Consider a case where there are 3000 service lines for a PO item. If I add 1 service item to this PO line item, the change form prints 3001 services for that line item. There were no changes done to first 3000 service line items.
    Currently PO change form takes care of changes at PO line item but it does not take care of changes at service line item level.
    Is there any setting that needs to be done for this so that it only considers the changes at Service line item level also.
    Regards,
    Shahu

    If you're using a standard form, send a message to SAP. Otherwise make a change in the form.

Maybe you are looking for