Issue with printing lockbox report

Hi,
My lockbox report after processing file is giving the total amount and check amount correctly but when I print the same report, the figures don't match with the correct report figures for check amount and advice total.
Please help....
Thanks,
Sheel
Edited by: Sheel Ahuja on May 19, 2010 11:11 PM

Hello,
Please, open a message for SAP on the OSS Marketplace. There are some notes for this type of issue, but they are currently in pilot release.
So, open a message describing the issue and providing a reproducible example in your system.
REgards,
REnan

Similar Messages

  • Issues with printing purchase order

    Dear friends,
    I'm having some issues with printing purchase orders.
    Normally when I create a purchase order via ME21N and then when I save the purchase order it then gets automatically printed.
    Suddenly it is not anymore working. I have created a purchase order this morning and it did not get printed. I get the message "frontend is not available"when i check the spool in SP01
    The funny think is if i call up the spool nr via SP01and then do a reprint then i'm able to reprint.
    What can be possibly the issue that I can't print the purchase order when I create the purchase order via ME21 when I save the purchase order? Can you help me with any guide on where I need to check why the PO is not printing immediatelly when i create the PO via ME21N?
    kind regards,
    Camilla

    hello all,
    thanks so far for your reply.
    i have checked today my user settings and that shows that my prints should go to LOCL (local default printer)
    The output conditions fpr purchase order have also LOCL (local printer)
    The weird thing is that I can print other reports to the default printer without any issues. The issue arise when I create a purchase order via ME21N. Normally when I save the PO it automatically prints. So no manual print instructions are required from my side. Because if I give manual instructions then I'm able to print the purchase order.
    Is it possible that the automatic printing is switched off and that it only prints when I hit manually the print button?
    Is the automatic printing something that is maintained in SPAD?
    kind regards and thanks for your help sofar

  • Issue with printing of Currency Value.

    Hi,
    I have an issue with printing of Currency Value.
    ( Pleae let me know if any thread available already  I searched it before posting but not found).
    The Problem is as follows:
    I have a field  s_value TYPE  MARM-SALK3.  (which is of currency type).
    The value of field is actually 1664.1450.   Currency USD
    But when I print this variable in ALV report it prints as  166414.50  though I used the same data type. (SALK3).
    Pleaes help me to fix this.
    Regards,
    Venkat

    Hi,
    If you use ALV to display currency value, you must sure that currency amount links with currency unit. You can archive this by using ALV fieldcat:
    wa_fieldcat-fieldname = 'SALK3'.
    wa_fieldcat-tabname = 'ITAB'.
    wa_fieldcat-cfieldname = 'WAERS'.
    wa_fieldcat-ctabname = 'ITAB'.
    append wa_fieldcat to gt_fieldcat.
    Please check,
    Regards,

  • Issue with Exceptions in Reporting

    Hi BW Gurus,
                I am still new to BW, Like I have a issue with exceptions in reporting.
                Let me explain clearly, I created a report which gives me two MRP values they are for example V1 and PD(there other MRP types but I am focusing only this two). Here I can see in my report those two values and the overall result of all MRP types (they are 6 different types). My report looks like this for examply
       V1                  46,782,434(this are rough figures)
       PD                  56,232,453
       Overall Result      102,434,111
            Here my requirement is I need to find this overall result like accroding to thresold values this overall result shows RED,YELLOW,GREEN.
            I have given threshold values in exceptions. like
       0           -
    > 45,000,000(Red)
       45,000,001  -
    > 65,000,000 (Yellow)
       65,000,001  -
    > 500,000,000 (Green)
           But according to this values I should get Red( Overall Result), I cant see any change in the overall result.
           Please can some one give advice how to reflect this threshold values in my report.Or I have to select any other options in exceptions.
           Thanks in advance.
    Regds
    Sam

    Not really possible with BEx functions, but if you provide a workbook to users you can just type in this information in a non-Bex cell and save the workbook.
    Else you can try to name your exception such that it shows the value ranges. Then in the report, from the toolbar Layout > Display Exceptions.
    Hope this helps...

  • Strange issue with WEBI schedule Report

    Hi All,
    I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
    Any idea???
    regards

    Hi Manoj,
    1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very    large data.
    2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
    Hope this will help,
    Anamika.

  • Acrobat 9 Pro issues with printing and now updating  !!! :(

    hello
    I had an issues with printing from my gmail account or from windows live mail
    so I made a complete re-installation
    now I am stuck with version 9.3.0 and when I check for updates I get a message
    UPDATER IS ALREADY RUNNING
    only... it's not running and nothing is updating !
    I made a restart... just in case... it did not change anything
    as to the printing issue, in case some of you have met it and cleared it...(hope)
    this was with version 9.5.0
    I get no error message but no pdf is created, only a text document with this :
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    72gmvi not found, using Courier.
    44dcmta not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: xshow ]%%
    Stack:
    [96 96 97 72 96 42 64 0]
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    not a good start for my week... I hope yours is nicer
    I'm running Win7 Ultimate x64

    thanks Mylenium
    the font association problem is something recent though, since I used acrobat to print mails directly from my gmail account previously...
    it's galling but I installed a free pdf printer which does the job, I needed copies of these mails urgently !
    as to the update issue, I see no aum.exe, msiexec.exe or setup.exe running... but that's quite above my head... do I look for those exact processes or are they generic names for processes ?
    does my question make sense ????

  • Problem with printing some report

    hi very body
    we have some problems with printing some reports.
    the problem is when printing a report the computer processes stoped
    and i should restart the computer a gain to print the report for first time and
    then in the second time i have same problem.

    Maher,
    You can check out the new printer driver test utility verions2.0 on OTN at:
    http://otn.oracle.com/software/products/reports/files/printerdrivertest.zip
    This should help you determine if it is a printer problem or whether you should look into another area.
    Also, you don't mention which version of reports, what command line options your using, the computer
    configuration your using whether it is a network printer or local printer connected to the machine. Support
    will need this information to help determine where your problem lies.
    Regards,
    The Oracle Reports Team

  • Issue with printing production order after changes through CO02

    Hi,
    Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
    Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
    Regards,
    Shiva

    Hi Shiva,
    Refer SAP note 28887.
    Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
    Please search /google before posting queries.
    Regards,
    SuryaD.

  • Issue with printing newly added operations in Production Order through CO02

    Hi,
    Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
    Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
    Regards,
    Shiva

    Hi,
    1) Go to Tcode "OPK8"
    2)Select LG02 "Op Control Ticket"
    3) Double click on :List Control for Transactions" in the left hand menu tree
    4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
    Try this.

  • Issue with  print image in air

    hey frnd,
    plz check this link
    http://livedocs.adobe.com/flex/3/html/help.html?content=printing_5.html
    hey frnds,
    while using this multiple print datagrid code, getting 1 issue with
    print image in printheader mxml file.
    I'm adding 1 image tag and runtime getting image path in variable and
    want to print tht image in header ,
    but it is not get printed but if i'm giving @Embed image as a source
    then it is print.
    Is any way there to print runtime image after adding in printheader
    file ?
    thx in advanced,
    [email protected]

    is any solution there ?

  • Issue with printing to a network photocopier

    We are a small school where the teachers all have Macbook Pro laptops. For a while we have been having intermittent issues with printing to the Photocopier, today is an example.
    Teacher tried to print, worked fine, then tried again 15 min later, received message Printer is in use (I was standing next to it and it wasn't in use!) tried again 10 min later, printed fine.
    Teacher tried to print, spooled for about 5 min then printed, tried again, printed fine.
    From the CUPS error log there are the following:
    - The Printer is in use
    - ICC Profile "/Library/Printers/Sharp/Profiles/SS0HIN0.icc" does not exist.
    - Remote host did not accept data file(32)
    - The printer did not respond
    - Stopping unresponsive job
    - The printer is not responding
    They are all on wireless. There is no network issue as I can ping the photocopier, get onto the Internet etc.
    They don't print via a server, they all have the photocopier installed on their macbooks as an IP printer using LDP.
    Thanks

    You'll need to manually create the folder and install the profiles. From the finder select Go, Go to Folder. Enter "/Library/Printers/Sharp/Profiles" without the quotation marks, Go. You might have to manually create the Profile folder. You can download this disk image from Sharp that contains the icc files here; http://www.sharpusa.com/ForBusiness/DocumentSystems/MFPsPrinters/MX4110N.aspx?vi ew=drivers
    Drag and drop the icc files from /MX-C26/Profiles to /Library/Printers/Sharp/Profiles
    Also make sure you install the drivers from MX-C26 for the appropriate version of OS X you are running.
    Hope this is clear.

  • Hyperion IR 9.3.1 - Issue in printing the report after exporting it to pdf

    Hi All,
    I am facing a problem in printing the report after exporting it to pdf format using Hyperion Interactive Reporting 9.3.1. I have set page size of report section to 11X17 inch landscape. Now I am exporting this report section to pdf. Report gets exported to pdf with size 11X17 inch landsacpe. But when I am trying to print this pdf it is shrinking the documnet size to A4 size paper and printing it rather it should print it on 11X17 inch paper size. Please suggest if there is fix available for this issue.
    Thanks
    Ujjawal

    "File > Print Setup > Paper > Size" on PDF.
    I think this issue is only to do with the printer and not IR.
    I think the question now is "Can your printer print 11X17 pages or not".

  • Issue with Print Properties button not responding in Adobe Reader 10.1.10

    We've recently been upgrading Adobe Reader 9.4.4 to 10.1.10 and started having a few reports of the Print -> Properties box in Adobe Reader not responding.  When this happens Adobe Reader will crash if you click on the Print button.  If you go into Devices and Printers and try and access the Printer Properties you are prompted to install the driver for the device.  It does seem to be quite random, it will work fine for days and the suddenly happen.  I've done testing and have been able to get it happen by opening Outlook, Word or Excel but it is completely hit and miss.  Sometimes the issue will happen and other times no matter how many times you open and close the various applications it's fine. 
    Fortunately it only seems to be an issue when accessing Properties, if you just print there are no options which is probably why we don't have more complaints.  Unfortunately this didn't come to light until we'd rolled it out to 2000+ machines across 8 locations.
    So far I've tried the following:
    1. Upgraded to Adobe Reader 11.0.9 and same issue
    2. Created a test print queue using a different print driver (my machine has a different driver again and is using a different print server)
    3. Uninstalled a number of applications that have caused us issues with Office 2010 due to dodgy addins (Workshare and HP Filesite)
    4. Rolled back to 9.4.4 and seems OK.  Problem here is that they receive PDFs in formats not compatible with older than X.
    System is Windows 7 Enterprise SP1 32bit, Office Professional 2010, printing is to Ricoh Equitrac (Follow You)
    Anyone have a fix for this or come across this before.  I'm going to try testing with a Postscript driver to see if that helps, which is the last item on Adobe's troubleshooting list.

    Select a PDF file, CMD+I, check the Open With section, and ensure that AR is selected. If not, then select it and click on the Change All button. Alternatively, select Preview, which is my default PDF reader.

  • Apex+Cocoon PDF Printing issue  on printing Large Reports

    Hello All,
    I m in a real hard situation with PDF printing in apex.. The application manages to push the report into PDF with lesser record reports but for Large reports, it says File corrupted when i open the downloaded PDF file..
    I use Apex+Coocoon and fop printing. I found from some forums as this issue was with Java Heap size being lesser and asked me to increase the size.. so i increased the size from 128MB to 1024MB and my server settings allows me to set 1550MB at the maximum..
    If i cross this limit the TOMCAT server stops from running...
    But all of the above was not much fruitful, since it throws again the same errors if report rows crosses 6000+ rows, can any one help me out, do i need to check any other settings to make my large reports printable in PDF.
    My application needs to print around *20000+ rows each report may have at least 20 columns* to get printed...
    Much awaited for your assistance
    Edited by: mohansanjee on Sep 8, 2010 3:58 AM
    Edited by: mohansanjee on Sep 8, 2010 3:59 AM
    Edited by: mohansanjee on Sep 8, 2010 4:00 AM

    Matt,
    On this note, it probably also makes sense to mention that with APEX 3.1 we introduce a PL/SQL API that gives you much broader control over what is generated how and the method it's made available to the client. You'll get the ability to retrieve the PDF in a BLOB directly on the server, store in your own tables for later download or send via email attachment. You'll also get the ability to write your own download process using after-submit page processes. And you can have combinations of your own XML with your own stylesheets, or combine report queries with customer stylesheets at runtime, or just simply retrieve the results of pre-defined report queries / report layouts in BLOBs.
    I'll talk about this much more on my Blog once 3.1 is out, and will provide whitepapers, how-to's etc
    Regards,
    Marc

  • CRVS2010 Beta - Problems with printing Crystal Reports for VS 2010

    Good afternoon,
    We have the following problem, we used the version of Crystal Reports that came integrated with visual studio for several years. But we are migrating to the version of Visual Studio 2010, and we are using the version of Crystal Reports for this same version, running on screen is correct, and run all the reports, but in print there is a failure we could not solve. Our customers use printers dot matrix as the "Epson LX300 +", but when you print the report leaves the impression defective in the previous version of Visual Studio 2005 "The impression is quite clear, we have attempted to overcome this problem with the options of PrintMode with activex and pdf in the CrystalReportViewer, and RenderingDPI option with multiple values. Obviously when using other types of printers such as laser or inkjet printing is perfect, but due to cost our customers use the printers mentioned. The server where the application is Windows server 2008 and client computers are windows xp, windows 7, windows vista. As network hardware and printers are working properly, and from other applications and from the other server with versions of Crystal Reports If anyone knows how to solve this problem I would like to receive support and ideas.
    Thanks
    Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
    Edited by: Ludek Uher on Oct 11, 2010 3:42 PM

    I have a question about printing reports. We are using VS2008 and the CR reportviewer with printmode = ActiveX. Many of our users absolutely hate the number of steps they must go through and the time it takes to print a Crystal Report when printmode = PDF. In our environment several times per day, we need to produce hard copies of reports for legal reasons. Making the users first render the report, then had it off to Adobe to print simply takes too much time which is why we are using the ActiveX print control.
    We recently started looking at VS2010 and discovered the issue with the unbundling of Crystal Reports. We have not downloaded CR for VS2010 yet.
    My question is this: for VS2010, what happened to the ActiveX print control? I read somewhere that it was going to become some WPF-type thing but there weren't many details about that. So when a user clicks on the print button in the Crystal Report Viewer intended for VS2010, what can they expect? Can they still print straight to a printer (is there something that gives them this capabitliy like the Active X print control did?), or has that capability been deprecated and they have to go through PDF? Thanks in advance for any information you can give me.

Maybe you are looking for