Issue with printing Standard Text in Production Environment.

Hi Peers,
In my smartform,
The Std Text on back of page in Production System is getting truncated.But in Development system it is fully printed.
I checked for the printers & language that are used in both the systems it is the same.
Could you please let me know your views as to what might be the problem.
Is it a basis issue or is there anything that we can do on development side.
Thanks in advance!
Daniel

Hi Phani,
Thanks for your reply. In fact both me and user are doing the same. For user some times this text is not showing and some times it is. This is very strange.
I can do this by keeping it in text element. But for some texts we need to add some other text in between dynamically.
for example : for BE10 we need to show like,
CONCATENATE 'This text is prepared on behalf of (' <vendor name> ') ' some text' INTO w_title_text.
In this case: I have tried preparing this text in the program lines node. Here the problem is I can able to mention single quote in prepare the text. In the above example it is bold.
Basically I don't what's happening when printing report texts. But if there is a way to show single quote while prepare text that should be fine.
Thank you
Surya

Similar Messages

Issue with printing report texts in Smartform

Hi ,
I developed a smartform and a print program. In the title of the smartform I need print a text depend on the company code. For this I prepared this text in the print program like the following.
case rbkp-bukrs.
when 'IT10'
smartform_struct-title = text-010.
endcase.
The problem is some times these texts are not printing on the form output. User are mad at this. when they complines me and I go and look at it, it is fine. I don't think this is printer issue. Any clues please let me know.
Thank you,
Surya

Hi Phani,
Thanks for your reply. In fact both me and user are doing the same. For user some times this text is not showing and some times it is. This is very strange.
I can do this by keeping it in text element. But for some texts we need to add some other text in between dynamically.
for example : for BE10 we need to show like,
CONCATENATE 'This text is prepared on behalf of (' <vendor name> ') ' some text' INTO w_title_text.
In this case: I have tried preparing this text in the program lines node. Here the problem is I can able to mention single quote in prepare the text. In the above example it is bold.
Basically I don't what's happening when printing report texts. But if there is a way to show single quote while prepare text that should be fine.
Thank you
Surya

Issue with printing production order after changes through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi Shiva,
Refer SAP note 28887.
Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
Please search /google before posting queries.
Regards,
SuryaD.

Issue with printing newly added operations in Production Order through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi,
1) Go to Tcode "OPK8"
2)Select LG02 "Op Control Ticket"
3) Double click on :List Control for Transactions" in the left hand menu tree
4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
Try this.

Printing Standard TEXT with multiple paragraphs in smartform

Hello all,
I have a requirement that, there is a very long standard text stored in a notification of an order in SAP ISU system. The text contains multiple paragraphs with indentations. I want to print this text directly into the smartform WITH SAME INDENTATION AND PARAGRAPH FORMATTING.
First i am reading the entire text using FM READ_TEXT.
My first problem is even if i read the text into a variable of type STRING , it just prints 255 characters of it.
And secondly if i try to printout it using LOOP AT node in smartforms, it prints the entire content but without any formatting .
Please let me know whether it is possible to print standard text in smartforms or not
Thanks
Nilesh Puranik

Hey ,
Well thanks for that but my replies got posted 2-3 times unknowingly, could'nt help it.
Coming to the problem, i guess you did not get my point when i say dynamic texts for each service order.
In my Report i am using LOOP AT ITAB ..where in itab i am storing a service order no i.e. ITAB-ORDER_NO
Now for every order there is standard text maintained in SO10 starting with order name
so my code goes like this.
LOOP AT ITAB.
CALL FUNCTION 'READ_TEXT'
EXPORTING
    ID                            = 'LTXT'
    LANGUAGE            = 'E'
    NAME                      = ITAB-order_no
    OBJECT                   = 'QMSM'
TABLES
    LINES                         = LINES .
CALL <SMART FORM Fm>
ENDLOOP.
Hence whatever Standard text maintained for that service order i want to display it as it is in the smartform with same paragraphs formatting and indentation.
IF i use a variable in smartform and pass the entire text after using READ_TEXT , it does not format the text and it just prints only 255 characters even if i define it of type STRING .
Hence i am stuck in this scenario.
Appreciate ur help though.
Thanks
Nilesh

Acrobat 9 Pro issues with printing and now updating !!! :(

hello
I had an issues with printing from my gmail account or from windows live mail
so I made a complete re-installation
now I am stuck with version 9.3.0 and when I check for updates I get a message
UPDATER IS ALREADY RUNNING
only... it's not running and nothing is updating !
I made a restart... just in case... it did not change anything
as to the printing issue, in case some of you have met it and cleared it...(hope)
this was with version 9.5.0
I get no error message but no pdf is created, only a text document with this :
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
72gmvi not found, using Courier.
44dcmta not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: xshow ]%%
Stack:
[96 96 97 72 96 42 64 0]
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
not a good start for my week... I hope yours is nicer
I'm running Win7 Ultimate x64

thanks Mylenium
the font association problem is something recent though, since I used acrobat to print mails directly from my gmail account previously...
it's galling but I installed a free pdf printer which does the job, I needed copies of these mails urgently !
as to the update issue, I see no aum.exe, msiexec.exe or setup.exe running... but that's quite above my head... do I look for those exact processes or are they generic names for processes ?
does my question make sense ????

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Having an issue with passing the text of a link to a session variable.

I am having an issue with passing the text from a link to a session variable. I am adding this html as a literal for each item in the list that i have populated with a query.
List<Literal> lit = new List<Literal>();
for (int i = 0; i < posts.Count; i+=4)
Literal someLit = new Literal();
someLit.Text=
@"<div class='row'>" +
"<div class='col-md-12'>" +
"<div class='panel'>" +
" <div class='panel-body'>" +
" " +
" <div class='row'> " +
" <br>" +
"<div class='col-md-2 col-sm-3 text-center' id='javascript'> <h3>" +
" <a href='#' runat='server' onserverclick='UserProfile_Click'>" + posts[i + 3] + " </a>" +
"</h3>" +
" </div>" +
" <div class='col-md-10 col-sm-9'>" +
"<h3><a href='Thread.aspx' runat='server' onserverclick='MyFuncion_Click'> " + posts[i] + " </a></h3>" +
" <div class='row'>" +
" <div class='col-xs-9'> " +
posts[i + 1] +
" </div>" +
"<div class='col-xs-3'></div>" +
posts[i + 2] +
" </div>" +
"<br><br>" +
" </div>" +
" </div>" +
" " +
" </div>" +
" </div>" +
" </div>" +
" </div>" +
"</div>";
lit.Add(someLit);
for(int i=0; i<lit.Count; i++)
this.Controls.Add(lit[i]);
I use one of the list positions as the text for a link in two different spots. For now, lets only talk about the line:
<a href='#' runat='server' onserverclick='UserProfile_Click'>" + posts[i + 3] + " </a>
Since I am generating these controls at pageLoad, I can't make them <asp:Linkbutton>s. And since they are anchor elements, I don't have access to an onCommand attribute or onservercommand attribute.
All I want to do is access the content from inside the specific link tags that I generate on link click and set it as a session variable. That's what I would like my UserProfile_Click function to do. I cant commandargs it in like i can with a linkbutton's
OnCommnad attribute, however.
My fear is that the onserverclick attribute resolves so something else on pageLoad normally and since I am generating it the way I am similar to the way a <asp:linkButton> resolves to a generated JavaScript.
Any help?

@Brunellus
For questions related to ASP.NET use the ASP.NET forum http://forums.asp.net
You should get more, better and faster answers on the other forum. Thanks, ahead of time.
Best Regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Issues with printing purchase order

Dear friends,
I'm having some issues with printing purchase orders.
Normally when I create a purchase order via ME21N and then when I save the purchase order it then gets automatically printed.
Suddenly it is not anymore working. I have created a purchase order this morning and it did not get printed. I get the message "frontend is not available"when i check the spool in SP01
The funny think is if i call up the spool nr via SP01and then do a reprint then i'm able to reprint.
What can be possibly the issue that I can't print the purchase order when I create the purchase order via ME21 when I save the purchase order? Can you help me with any guide on where I need to check why the PO is not printing immediatelly when i create the PO via ME21N?
kind regards,
Camilla

hello all,
thanks so far for your reply.
i have checked today my user settings and that shows that my prints should go to LOCL (local default printer)
The output conditions fpr purchase order have also LOCL (local printer)
The weird thing is that I can print other reports to the default printer without any issues. The issue arise when I create a purchase order via ME21N. Normally when I save the PO it automatically prints. So no manual print instructions are required from my side. Because if I give manual instructions then I'm able to print the purchase order.
Is it possible that the automatic printing is switched off and that it only prints when I hit manually the print button?
Is the automatic printing something that is maintained in SPAD?
kind regards and thanks for your help sofar

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

Wifi: my Cell phone will remember 10 wifi connections. So delete any you don't use often and your home wifi and try to enter home wifi again.
if it still won't connect to home wifi, call your internet provider for help. You may need a newer router or different settings Or upgraded service. Your phone seeks the best connection and will refuse lesser connections.
last resort. Backup the phone. Do a full reset, then restore as new with the backup.
if still not fixed, go back to apple and insist on repair or replacement.
HOWEVER. voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

Issue with print image in air

hey frnd,
plz check this link
http://livedocs.adobe.com/flex/3/html/help.html?content=printing_5.html
hey frnds,
while using this multiple print datagrid code, getting 1 issue with
print image in printheader mxml file.
I'm adding 1 image tag and runtime getting image path in variable and
want to print tht image in header ,
but it is not get printed but if i'm giving @Embed image as a source
then it is print.
Is any way there to print runtime image after adding in printheader
file ?
thx in advanced,
[email protected]

is any solution there ?

Issue with printing to a network photocopier

We are a small school where the teachers all have Macbook Pro laptops. For a while we have been having intermittent issues with printing to the Photocopier, today is an example.
Teacher tried to print, worked fine, then tried again 15 min later, received message Printer is in use (I was standing next to it and it wasn't in use!) tried again 10 min later, printed fine.
Teacher tried to print, spooled for about 5 min then printed, tried again, printed fine.
From the CUPS error log there are the following:
- The Printer is in use
- ICC Profile "/Library/Printers/Sharp/Profiles/SS0HIN0.icc" does not exist.
- Remote host did not accept data file(32)
- The printer did not respond
- Stopping unresponsive job
- The printer is not responding
They are all on wireless. There is no network issue as I can ping the photocopier, get onto the Internet etc.
They don't print via a server, they all have the photocopier installed on their macbooks as an IP printer using LDP.
Thanks

You'll need to manually create the folder and install the profiles. From the finder select Go, Go to Folder. Enter "/Library/Printers/Sharp/Profiles" without the quotation marks, Go. You might have to manually create the Profile folder. You can download this disk image from Sharp that contains the icc files here; http://www.sharpusa.com/ForBusiness/DocumentSystems/MFPsPrinters/MX4110N.aspx?vi ew=drivers
Drag and drop the icc files from /MX-C26/Profiles to /Library/Printers/Sharp/Profiles
Also make sure you install the drivers from MX-C26 for the appropriate version of OS X you are running.
Hope this is clear.

Issue with printing of Currency Value.

Hi,
I have an issue with printing of Currency Value.
( Pleae let me know if any thread available already I searched it before posting but not found).
The Problem is as follows:
I have a field s_value TYPE MARM-SALK3. (which is of currency type).
The value of field is actually 1664.1450. Currency USD
But when I print this variable in ALV report it prints as 166414.50 though I used the same data type. (SALK3).
Pleaes help me to fix this.
Regards,
Venkat

Hi,
If you use ALV to display currency value, you must sure that currency amount links with currency unit. You can archive this by using ALV fieldcat:
wa_fieldcat-fieldname = 'SALK3'.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-cfieldname = 'WAERS'.
wa_fieldcat-ctabname = 'ITAB'.
append wa_fieldcat to gt_fieldcat.
Please check,
Regards,

Printing standard text with TAB

Hi Folks,
I am very new to SAP Scripts and need some help here. I am printing some text using Standard Text object (using INCLUDE statement in sapscript). But now I want to print the text after a TAB. I tried with below syntax but no luck.
/: ,,INCLUDE ZTEXT OBJECT TEXT ID ST
Request you to please suggest some approach.
Thank you.
Regards,
Sud

Thanks Christian !
Yes, m using SO10 for creating this text.
But as u suggested, I cannot use tab in ZTEXT, because this will affect the alignment for all the other scripts where I am using this ZTEXT.
For every other script, I do not need this extra tab before the ZTEXT. Only for this one script I want to intorduce a Tab before printing this ZTEXT.
Any other approach?
Thanks
Regards,
Sud

IExpenses-12.1.3 Facing Issue with 2 custom text fields on the standard OAF

Dear All,
We are facing problem where custom text fields on standard OAF page does not retain their values when we traverse back-forth on the OAF page.
Here is the exact issue details
1) We added 2 text fields(Attribute5 and Attribute6) through personalization on Mileage Line Details Screen(standard OAF page) of iExpenses 12.1.3.
2) And business requirement is whenever user enters values into these fields, difference of these values is populated in third field which is standard field on that page.
Issue
When user enters values into above 2 fields, difference is calculated correctly however once he clicks on return page and comes back again on the detail page
then all the standard fields retain their values but 2 custom fields have blank value.
Is there any issue with personalization? or any other issue? Please suggest.
Thanks,
Mahesh

Thanks Pratap for checking
There is button named as "Calculate Amount" on the line details page so it is happening in below 2 scenario
1) When User enters values in 2 fields and clicks on Calculate Amount Button then values get disappeared from custom fields
2) When user clicks on return button, go to main page and clicks on detail button ( to come back on same line) then all the standard fields have valuece and custom one's disappeared.
Thanks,
Mahesh

Issue with printing Standard Text in Production Environment.

Similar Messages

Maybe you are looking for