Issue with privilege grouping in AC Validation task

Hi Experts,
We are using GRC AC Validation Task on repository events.Assignment grouping privilege on repository is set as "Grouping- separate by application".
While assigning the multiple privileges in IDM, only one access request with multiple roles is submitted to GRC which is as expected.
After the approval in GRC, only the first privilege is approved and assigned to user, however all the other privileges are directly rejected.
When we do not group the privileges, IDM submits multiple requests for each privilege and the everything works as expected. But we are looking to setup single request for multiple privileges for same repository.
Pelase suggest.
Thanks
Rashmi

Hi,
   please check if the correction from the below note
1968150 - Wrong status on GRC assignments in Identity Management
is applied as the behaviour appears similiar as described in the note.
Regards,
Chris
SAP AGS Support

Similar Messages

  • Material replication from R/3 to SRM - Issue with Material group

    Hello All,
                      I am working on BADI PRODUCT_CUSTOMER2 and method MAP_R3_TO_CRM_MATERIALMaterial replication part from R/3 to SRM.
    I am using a Ztable to map r/3 material group to SRM material group(Product category).
    For example Material M1 with material group 100 is transferred to SRM. Material group(Product category) 100 exist in SRM, but I am changing the material group to 200 in the product_customer2 badi.  its working fine.
    In another scenario, Material with material M1 with material group 300. Material group(product category) 300 does not exist in SRM,
    I am changing the material group to 200 in the bdoc, in the product_customer2 badi. It is not working. The LUW is failing in SMQ2 transaction with the error "Error in Mapping (Details: transaction SMW01)". The BDOC is failing with error "Category for material group 300 does not exist"
    I tried to deactivate the badi PRODUCT_CUSTOMER2, even then the FM MAP_BAPIMTCS_AND_PROCESS is validating the material group from R/3.
    I tried to change the material group 300 to the existing material group 200 at initial stage in debugging in function module MAP_BAPIMTCS_AND_PROCESS but still the bdoc is failing with error "No storage form defined for product type 01 / logical system".
    I am doing my testing using the following steps.
    1. change the material descriptioni in MM02 in R/3.
    2. An item is displayed in the queue in SMQ2 in SRM.
    3. I have debugged the LUW and analyzed my badi by setting breakpoint at method MAP_R3_TO_CRM_MATERIAL, its changing the material group in the bdoc properly.
       that didnt work.
       also i tried to change the material group in the function module MAP_BAPIMTCS_AND_PROCESS before the badi is called.
    4. I am checking the BDOc status using tcode SMW01 and checking the material using tcode COMMPR01.
    can someone tell me how I can change the R/3 material group to SRM material group at the time of mapping in SRM?
    Thanks
    Sathish PM

    Hi find below for the product cat
    Steps to create the product category in SRM:
    1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
    2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
    3) Do a test and check if the product category is available for procurement in SC.
    Regards,
    Satish

  • Issue with Service Group Configuration for a BPM Process

    Hi,
    I am working on BPM processes on CE 711. I need to use the Service Group settings. I created a BPM process with a automated activity that maps to an enterprise service in HU2 (SAP ES Workplace system).
    After setting up the configuration in NWA for service registry and service group, I run the BPM process. The Enterprise Service runs into error and log records it as 'No matching BindingData is found for SOA smart configuration'. I have done most of the configuration as recommended but the matching end point
    url seems to be picked wrongly [http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_employeebasicdbyemployeeqr?sap-client=800] .
    I could not get any info on notes search and could not get much info about service group config. Any help here is greatly appreciated.
    Regards
    Suresh

    Hi Suresh,
    i just got an answer on my ticket. Here it is:
    There is a known issue with the upper case of the endpoint published in
    the Services Registry and in the WSDL.
    Before SP2 the matching for the binding for invocation is done
    by the endpoint url. There is a known issue that the endpoint published
    in the Services Registry is with lower case of the characters but in theWSDL the endpoint is with upper case. In your case the endpoint url in
    the Services Registry is as shown in the exception above:
    http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_srvcreqcrtrc?sap-client=800
    but in the WSDL the endpoint url is with upper case of the endpoint:
    ../ECC_SRVCREQCRTRC/..
    Because of this difference the call fails. This is fixed is 711 SP2.
    Workaround for this is if you create a Provider System based on your
    WSDL, not a Services Registry one.
    Hope that helps...
    Best regards
    Michael

  • Issues with privileges in HCP development

    Hi Everyone,
    Issue with insufficient privilege while using data preview on Attribute & Analytical view.
    Executed following command after going through some reviews:
    GRANT SELECT, INSERT, UPDATE ON SCHEMA "DEV_XXXXXXXX" TO _SYS_REPO WITH GRANT OPTION;
    But the above statement couldn't fetch anything. Please guide with the system privilege issues

    Hi Vivek,
    Couldn't find the _SYS_BIC schema. Tried many options mentioned in SCN. But couldn't fetch anything out the solution in SCN.
    Recently I came across following steps:
    1. Make sure _SYS_REPO has privilege SELECT WITH
    GRANT OPTION for the schemas used. In order to grant _SYS_REPO this privilege
    you can execute the following statement:
    GRANT SELECT ON SCHEMA <YOUR_SCHEMA> TO _SYS_REPO WITH GRANT OPTION;
    2. Make sure the user activating the Object has at
    least SELECT privilege over the schemas used within the scenario. SQL
    statement to grant this privilege would be:
    GRANT SELECT ON SCHEMA <YOUR_SCHEMA> TO <USER_THAT_WILL_ACTIVATE_ANALYTIC_OBJECT>;
    3. Make sure all the dependencies of the Analytic
    Object to be activated is contained in the Analytic Privilege assigned to the
    user that will actually activate the Main Analytic Object.
    First option is known to everyone.
    I am stuck with the second option. Can I know the user that Activate analytical object.

  • Photoshop CS5 - Compatibility issue with nested groups

    I'm using Photoshop CS5 to create a multi-layered, group-heavy PSD. The final file is intended for public consumption, so, ideally, I'd like it to be accessible to as many users - and therefore compatible with as many versions of Photoshop - as possible.
    However, I just tried to save the file, and was prompted with this message:
    This document contains nested layer groups that may change in apprearance if opened in applications older than Photoshop CS5.
    Opening the file in CS4 after the save confirmed that a few of the layer groups were indeed corrupt.
    Can anyone shed any light on this?

    It looks like you're the only person so far who's posted that particular message on the web anywhere!
    Out of curiosity, do you have the Maximize PSD and PSB File Compatibility option set to Always in Edit - Preferences - File Handling?
    I have no experience with nested groups, myself, but that setting comes to mind as being involved with the kind of compatibility you're hoping to accomplish.
    I do know that nested group capabilities have been around since at least Photoshop CS2.
    -Noel

  • Issue with Delivery Grouping in Sales Order

    Hello Gurus,
    I have a problem in Sales Order (VA01 & VA02). The issue is as follows.
    We have created a material called “FREIGHT” to calculate the Shipping & Handling cost in a Sales Order. This material has no ATP CHECK, so the Material Av. Date (MAD) is determined as immediate or the current date.
    But the business process we want to implement is, the FREIGHT material should not be delivered separately, but should be grouped with one the line items in the sales order which has the earliest material available date and copy the corresponding dates to FREIGHT line item and delivery grouping should be done.
    1. Say 1st line item is a BOM Material, next item is a standalone material (Non-BOM), and 3rd item is FREIGHT material.
    POSNR   Matnr           Qty     DlvGrp  DlvDt  MAD  LoadingDt
    10     BOM (Parent)     1    1   x-date   09/11/2006    x-date
    11     SKU1 (Child)     x        x-date   09/11/2006    x-date
    12     SKU2 (Child)     x        x-date   09/11/2006    x-date
    20     Non BOM    1     2        x-date   09/06/2006    x-date  
    30     FREIGHT      1      2        x-date   09/06/2006    x-date  
    I know the above example may not be that clear, but this is the space available when you post your topic.
    Based on the above example, the earliest material available date is for Line item 20 i.e. 09/06/2006 and assume FREIGHT is also tied to the above line item (20) i.e. line item 20 & 30 are delivery grouped.
    Say if I delete line item 20, now FREIGHT should be tied to line item 10 and delivery grouping should also take place get changed to 1 for FREIGHT item.
    I need to achieve this using user-exits, but HOW?
    Appreciate your views and the solution for the scenario.
    Thanks.
    Regards,
    Suresh Ganti

    Hi Suresh,
    I guess you can accomplish this using SAVE_DOCUMENT_PREPARE in MV45AFZZ. In table xvbap you will find all order items with an update indicator. If an item has indicator 'D' (deleted) and field GRKOR (delivery group) filled you should find the corresponding FREIGHT line having the same value for GRKOR. Then find the remaining non-FREIGHT item with the earliest material availability date and set the value of GRKOR for this item to the same value as the FREIGHT item.
    Regards,
    John.

  • Issues with table filter during navigation between task-flows

    Hello everyone,
    I'm looking for a workaround to resolve two issues about the table filter. They are:
    1) If I type something in a filter and I change tha page (in a different task flow) when I return on the first page there is the previous search plus the string "%*". Here the video example: http://screencast.com/t/FbVenZGm
    2) In the same scenario, if I click enter on this filter the system returns this message error: "Attempt to set a parameter name that does not occur in the SQL: vc_temp_1 ". Here the video example: http://screencast.com/t/yMs6rNDF
    I have found something interesting in this thread: task-flow table filtering behaviour related to bug 8602867
    Anyway, I have implemented the solution reported in this document: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/april2012-otn-harvest-1609383.pdf (pp. 8-11). This solution works fine with my master table, but it doesn't with the detail table.
    Have you any idea for this kind of behavior?
    Thanks in advance,
    Baduel

    Sudipto,
    each table has a binding on a page fragment in this way:
    <af:table [...] binding="#{backingBeanScope.MyBackingBean.masterTable}">
    <af:table [...] binding="#{backingBeanScope.MyBackingBean.detailTable}">
    In the pageDef I have two methods, each one of the VOImpl class related to the table:
    <methodAction IterBinding="MasterTableVO1Iterator"
    id="clearOutstandingImplicitViewCriteriaMaster"
    RequiresUpdateModel="true" Action="invokeMethod"
    MethodName="clearOutstandingImplicitViewCriteria"
    IsViewObjectMethod="true" DataControl="MyDataControl"
    InstanceName="MyDataControl.MasterTableVO1"/>
    <methodAction IterBinding="DetailTableVO2Iterator"
    id="clearOutstandingImplicitViewCriteriaDetail"
    RequiresUpdateModel="true" Action="invokeMethod"
    MethodName="clearOutstandingImplicitViewCriteria"
    IsViewObjectMethod="true" DataControl="MyDataControl"
    InstanceName="MyDataControl.DetailTableVO1"/>
    MyBackingBean class:
    public class MyBackingBean {
    private RichTable masterTable;
    private RichTable detailTable;
    /*getter methods here*/
    public void setMasterTable(RichTable masterTable) {
    this.masterTable = masterTable;
    resetTableFilter(1);
    public void setDetailTable(RichTable detailTable) {
    this.detailTable = detailTable;
    resetTableFilter(2);
    /*This method returns the phase id */
    private String printCurrenPhaseID() { 
    FacesContext fctx = FacesContext.getCurrentInstance();
    Map requestMap = fctx.getExternalContext().getRequestMap();
    PhaseId currentPhase=(PhaseId)requestMap.get("oracle.adfinternal.view.faces.lifecycle.CURRENT_PHASE_ID");
    // System.out.println("currentPhase = "+currentPhase);
    return currentPhase.toString();
    public void resetTableFilter(int tab) {
    String phase = printCurrenPhaseID();
    FilterableQueryDescriptor queryDescriptor;
    if(phase.startsWith("RENDER_RESPONSE")) { // Only in this phase the binding is ready
    switch(tab) {
    case 1:
    queryDescriptor = (FilterableQueryDescriptor) getMasterTable().getFilterModel();
    if (queryDescriptor != null && queryDescriptor.getFilterCriteria() != null) {
    queryDescriptor.getFilterCriteria().clear();
    // PPR refresh a jsf component
    AdfFacesContext.getCurrentInstance().addPartialTarget(getMasterTable());
    break;
    case 2:
    queryDescriptor = (FilterableQueryDescriptor) getDetailTable().getFilterModel();
    if (queryDescriptor != null && queryDescriptor.getFilterCriteria() != null) {
    queryDescriptor.getFilterCriteria().clear();
    // PPR refresh a jsf component
    AdfFacesContext.getCurrentInstance().addPartialTarget(getDetailTable());
    break;
    default: return;
    invokeClearViewCriteria(tab);
    public BindingContainer getBindings() {
    return BindingContext.getCurrent().getCurrentBindingsEntry();
    /* This method invokes the exposed method in my fragment */
    public void invokeClearViewCriteria(int tab) {
    BindingContainer bindings = getBindings();
    OperationBinding operationBinding;
    if(tab == 1)
    operationBinding = bindings.getOperationBinding("clearOutstandingImplicitViewCriteriaMaster");
    else if(tab == 2)
    operationBinding = bindings.getOperationBinding("clearOutstandingImplicitViewCriteriaDetail");
    else
    return;
    if(operationBinding != null) {
    operationBinding.execute();
    Finally I have two identical exposed methods in the VOImpl classes of the tables:
    public void clearOutstandingImplicitViewCriteria() {
    // we only want to remove the stuff that was added though the table
    //filter (or a default search form)
    // "__ImplicitViewCriteria__" is the magic name for this VC
    ViewCriteria vcDefault = this.getViewCriteria(ViewCriteriaManager.IMPLICIT_VIEW_CRITERIA_NAME);
    if (vcDefault != null) {
    //Clear the stored values
    vcDefault.clear();
    //And refresh the collection
    this.executeQuery();
    Please note that this workaround works fine with my master table, but i does not with the detail table.
    Thanks again.
    Baduel

  • I'm experiencing issue with MacBook's performance. Kernel Task is using 612 MB of RAM.

    Hi Apple Users,
    I am new to this kind of forum/support thread. I am experiencing poor performance on my MacBook Pro. One thing I noticed is the kernel task is eating up too much ram. I have no idea how to fix this. Please share your expertise or past experiences in dealing with kind of problem. I would greatly appreciate for any inputs on this kind of issue.
    I have some details that I think might help since I read several threads related to my issue.
    EtreCheck version: 1.9.11 (43) - report generated May 26, 2014 at 12:27:51 AM EDT
    Hardware Information:
              MacBook Pro (13-inch, Mid 2012)
              MacBook Pro - model: MacBookPro9,2
              1 2.9 GHz Intel Core i7 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: (null)
    System Software:
              OS X 10.9.3 (13D65) - Uptime: 0 days 8:27:45
    Disk Information:
              APPLE HDD TOSHIBA MK7559GSXF disk0 : (750.16 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 749.3 GB (317.98 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Gatekeeper:
              Mac App Store and identified developers
    Startup Items:
              ChmodBPF: Path: /Library/StartupItems/ChmodBPF
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.adobe.SwitchBoard.plist Support
              [invalid] com.oracle.java.Helper-Tool.plist
              [not loaded] com.vsearch.daemon.plist Support
              [running] com.vsearch.helper.plist Support
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist Support
              [loaded] com.adobe.CS5ServiceManager.plist Support
              [invalid] com.oracle.java.Java-Updater.plist
              [running] com.vsearch.agent.plist Support
    User Launch Agents:
              [loaded] com.adobe.AAM.Updater-1.0.plist Support
              [loaded] com.google.keystone.agent.plist Support
    User Login Items:
              iTunesHelper
              Battery Health
              uTorrent
              Wondershare Helper Compact
              Dropbox
    Internet Plug-ins:
              Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
              FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.3
              Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
              Default Browser: Version: 537 - SDK 10.9
              OfficeLiveBrowserPlugin: Version: 12.3.6 Support
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Safari Extensions:
              Video Converter: Version: 4.0.0
              Conduit Search for Safari: Version: 1.0
              GoPhoto.it V9.0: Version: 1.222
              YouTube Downloader: Version: 4.0.0.3
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              ConduitNPAPIPlugin: Version: 1.0 - SDK 10.6 Support
              Google Earth Web Plug-in: Version: 7.1 Support
    3rd Party Preference Panes:
              Flash Player  Support
              Flip4Mac WMV  Support
              Growl  Support
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                  14%          Google Chrome
                   3%          WindowServer
                   1%          securityd
                   1%          softwareupdated
                   1%          Skype
    Top Processes by Memory:
              172 MB          Google Chrome
              156 MB          com.apple.IconServicesAgent
              123 MB          softwareupdated
              123 MB          Finder
              123 MB          mds_stores
    Virtual Memory Information:
              96 MB          Free RAM
              3.28 GB          Active RAM
              3.16 GB          Inactive RAM
              914 MB          Wired RAM
              4.57 GB          Page-ins
              210 MB          Page-outs
    Thank you

    I'm having the same issue....Any chance of getting some expert eyes on this report?  Much appreciated.
    Problem description:
    kernel_task is sucking up 1.3GB of RAM
    EtreCheck version: 2.1.3 (106)
    Report generated December 16, 2014 at 2:07:57 PM PST
    Hardware Information: ℹ️
      MacBook Pro (Retina, 15-inch, Mid 2014) (Verified)
      MacBook Pro - model: MacBookPro11,3
      1 2.8 GHz Intel Core i7 CPU: 4-core
      16 GB RAM Not upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      Intel Iris Pro -
      NVIDIA GeForce GT 750M - VRAM: 2048 MB
      Color LCD 2880 x 1800
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 10 days 1:50:25
    Disk Information: ℹ️
      APPLE SSD SM1024F disk0 : (1 TB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 160.00 GB (73.17 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      SSD Storage (disk0s4) /Volumes/SSD Storage : 839.56 GB (113.99 GB free)
      ST1000LM024 HN-M101MBB disk4 : (1 TB)
      EFI (disk4s1) <not mounted> : 210 MB
      Kyle Master (disk4s2) /Volumes/Kyle Master : 999.86 GB (543.39 GB free)
    USB Information: ℹ️
      Lexar  USB_3_0 Reader 
      Apple Internal Memory Card Reader
      Apple Inc. iPhone
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
      Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
      LaCie Rugged THB USB3
    Configuration files: ℹ️
      /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Capture One 8.0.2.app
      [not loaded] com.Leaf.driver.LeafFwXDriverMatcher (1.2.0d1) [Support]
      /Applications/DiskWarrior.app
      [not loaded] com.alsoft.Preview (4.4) [Support]
      /Applications/TechTool Pro 7.app
      [not loaded] com.micromat.driver.spdKernel (1 - SDK 10.8) [Support]
      /Library/Application Support/HASP/kexts
      [loaded] com.aladdin.kext.aksfridge (1.0.2) [Support]
      /System/Library/Extensions
      [not loaded] com.wacom.kext.wacomtablet (6.3.8 - SDK 10.9) [Support]
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [loaded] com.adobe.AdobeCreativeCloud.plist [Support]
      [running] com.bjango.istatmenusagent.plist [Support]
      [running] com.micromat.TechToolProAgent.plist [Support]
      [running] com.wacom.wacomtablet.plist [Support]
      [loaded] com.xrite.device.softwareupdate.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [invalid?] com.adobe.SwitchBoard.plist [Support]
      [running] com.aladdin.aksusbd.plist [Support]
      [running] com.aladdin.hasplmd.plist [Support]
      [running] com.bjango.istatmenusdaemon.plist [Support]
      [loaded] com.bombich.ccc.plist [Support]
      [running] com.micromat.TechToolProDaemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.prosofteng.DRInstaller.plist [Support]
      [loaded] com.prosofteng.DriveGenius.locum.plist [Support]
      [running] com.xrite.device.xrdd.plist [Support]
      [loaded] net.sourceforge.MonolingualHelper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [running] com.prosofteng.DGMonitor.plist [Support]
      [running] com.spotify.webhelper.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      ChronoSyncBackgrounder Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
      i1ProfilerTray Application (/Applications/i1Profiler/i1ProfilerTray.app)
      Dropbox Application (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
      AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Support]
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      Default Browser: Version: 537 - SDK 10.9
      SharePointBrowserPlugin: Version: 14.0.0 [Support]
      WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Support]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      TechTool Protection  [Support]
      WacomTablet  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          10% WindowServer
          8% ChronoSync
          3% bluetoothaudiod
          2% Spotify
          1% fontd
    Top Processes by Memory: ℹ️
      464 MB com.apple.WebKit.WebContent
      429 MB WindowServer
      241 MB Safari
      223 MB ChronoSync
      206 MB Finder
    Virtual Memory Information: ℹ️
      290 MB Free RAM
      5.63 GB Active RAM
      9.34 GB Inactive RAM
      1.67 GB Wired RAM
      32.42 GB Page-ins
      586 MB Page-outs

  • Variations issues with User & Group Site Column value

    Hi all,
    I have created variation sites. e.g. http://mydomain/en-us for english & http://mydomain/de-de for german language. I have created custom page layouts. This page layouts are based on custom content types. I have created a column called "User"
    which is type of "User/Groups". I am registering this column to my page layout.  http://mydomain/de-de is my default site.
    Now I am editing column called "User" on page & save it. It saves data properly. But when I am propagating these changes to another site that is http://mydomain/en-us. It shows me all controls with values filled. but with "User"
    column, its showing me blank value.
    Any suggestion. ?
    Thanks in advance.

    http://webcache.googleusercontent.com/search?q=cache:kNlxGIj5f1kJ:sjoere.blogspot.com/2007/11/5-reasons-why-you-should-not-use.html+&cd=2&hl=en&ct=clnk&gl=in
    Content types not propagated
    Risk
    When you add a content type to a page library in the variation source, this type is not automatically propagated to the other labels (see
    my previous post). If you then create a page with that content type in the variation source, it does get published to the other labels but loses its content type field values.
    Proposed solutions
    Set up your site via a site definition that already contains the proper content type bindings to the page libraries. All labels will use the same content types
    Put a good governance plan in place to make sure manual changes are done in every label
    If this helped you resolve your issue, please mark it Answered

  • Oracle HRMS Setup Issue with Business Group

    Hi Gurys.
    need your ugrent help.
    i am implementing Oracle HRMS on 12.1.1
    Steps
    --- Responsbility Creation
    1- Responsbility Creation XX_HRMS (Responsbility created through Sysadmin)
    2- Menu Option GLB SHRMS Navigator
    -- USER Creation
    1- Create user XX_USER (User Creation done through Sysadmin)
    2- Below Responsiblities are granted to new User HRMS)
    -Application Developer
    -System Administrator
    -XX HRMS
    -System Administrator
    --KFF Creation through XX_USER with System Administrator
    --Location Creation through XX_USER with XX_HRMS Responsbility
    --Business Group creation through XX_USER with XX_HRMS Responsbility
    Here is issue, Business group created and saved, upon search it's not showing business group.
    i change the responsbility to System Administrator and set the profile at system level
    HR: Business Group to newly created Business Group.
    but when i want to set HR:Security profile , business group is not visible

    Thanks for your reply .
    1- avigate to the oraganization window and search for the business groups? how many do you see ? What are the names ?
    It show all the business grup , names are in query result below
    2- What is the result of the query -
    Select * from per_business_groups
    below is the query result
    NAME |DATE_FROM|LOCATION_ID|SHORT_NAME|LEGISLATION_CODE|CURRENCY_CODE|ENABLED_FLAG
    FAYYAZ GB |1/1/1990 |142 |Setup |US|USD|Y
    FAYYAZ |2/8/2011 |142 |Fayyaz |PK|USD|Y
    XX_TEST |2/8/2010 |142 |XX Test |GB|GBP|Y
    XX Company Final |2/8/2011 |142 |XX Company Final |GB|GBP|Y
    XX Company |2/8/2011 |142 |XX Company |GB|GBP|Y
    XX Comapny |2/8/2011 |142 |XX Company |GB|GBP|Y
    TEST |2/8/2011|142 |TEST |GB|GBP|Y
    3- Naigate to the security profile window. How many security profiles do you see ? What are the business groups they are associated with ?
    there is no business group showing in security profile, nor at site level not at responsbility.

  • Hi, i have an issue with Skype group calls.

    Short story even shorter.
    Whenever i get added to a call. I CANNOT join said group call/chat if i do not have the "host" on my friend list. In order for me to be able to join the call, i have to add the "host" to my friendlist OR have the host quit the call and then have whomever i had on my friend list to call the group. 
    Is there a fix for this? Do i really have to clutter my friendlist with near to say useless contacts just to join a call?
    Final notice: When i try to join a call with a host that i do not have on my friendlist, the call quickly opens and i can see the users in the call but can't hear them and then just as quickly the call "quits" on me and i have the option to rejoin again by pressing the green button but then again the same issue happens and i get kicked out until i do one of the two things said above.

    there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

  • Layout issue with Crystal Grouping

    Dear all,
    I have created a report with Graph and the records on the group level. The data and graph is showing perfectly fine however the problem is the layout.
    Right after the graph, data starts to show up, which means, the data adjusts itself either on page 1 or 2 by itself. That makes the report look really bad because half of the data is on the first page and half is on the second page.
    I have looked at the section expert options but did not find where I could say "Start section Group1b from new page".
    Could someone please guide me to the right place?
    here is how report shows up
    Page1
    Graph
    Data
    Data
    Data
    Page 2
    Data
    Data
    Data
    What I would like it to do is
    Page1
    Graph
    Page2
    Data
    Data
    Data
    Data
    Data
    The Group Footer is divided from Group 1a to Group 1p.
    Regards
    Jehanzeb

    I think I answered my own question while typing the question.
    I placed the graph on the group header and kept the footer for the data and clicked on Keep group together.
    It worked like a charm
    Regards

  • Issue with setting variable after certain validation in RTF

    Hi All,
    I have a requiremnt to set a variable value after certain validation in RTF, i tried by using below way.
    ?xdofx:if(($p_email is not null or $p_fax is not null ) and $p_ver is null and S_C = 'ABC' )?>
    <?xdoxslt:set_variable($_XDOCTX,'SC','LIST_PRI')?> <?end if?>
    So here i need to set the variable 'SC' with value 'LIST_PRI' once the above if condition satisfied. then i tried to get the value as below :
    <?if: xdoxslt:get_variable($_XDOCTX, 'SC')='LIST_PRI'?><?L?><?end if?>
    But it is not working properly with if statement and set_variable statement, please help me on this
    Thanks

    Change the code as follows and give it a try.
    <?if:(($p_email is !='' or $p_fax !='') and $p_ver= '' and S_C = 'ABC' )?>
    <?xdoxslt:set_variable($_XDOCTX,'SC','LIST_PRI')?><?end if?>
    Or send the RTF and xml file to bipuser@gmail and I will take a look. Update this thread to let me know if you have sent me the files.
    Thanks,
    Bipuser

  • Facing issue with tRFC (CALL FUNCTION in BACKGROUND TASK DESTINATION

    In transcation CJ20N there is aBADI call ZCL_IM_CL_IM_PROJ_UPDATE in which there is a method
    IF_EX_PROJECTDEF_UPDATE~AT_SAVE.  My requirement is that when the status of the project is changed and saved then after the SAVE some actions are to be performed (BDC for transcation CJ30 & CJ9FS are to be called).
    Since this method is called AT SAVE and i need to call the bdc after the comit (of SAVE) is done. So I have made a RFC FM in which I am calling the bdc. and then calling the FM as
    CALL FUNCTION <FM> in BACKGROUND TASK DESTINATION <sy-sysid>.
    For the txn. CJ9FS bdc this method is working fine and bdc is called after SAVE but for txn. CJ30, at times,the bdc  is not working though if I run the BDC FM seperately using SE37 then its working fine.
    Can any body guide me where I am going wrong.

    The scenario works fine for me. The issue was unable to create a proper test condition in the RFC.
    CALL FUNCTION 'ZMY_RFCASYNC'
       IN BACKGROUND TASK
       EXPORTING...
       TABLES...
       EXCEPTIONS...
    Simulated error condition in 'ZMY_RFCASYNC'
    and got entry in SM58 by simply making an exception. 
    Thank you all.

  • Issue with AD group based collection

    Hi,
    We are using AD security group based membership. Also, we are uing the same SCCM infra to cover other domains as well.
    From Activie Direcoty, it could able to discover the machines (computer objects) belongs to other domains but those computer objects not reflecting onto the collections.
    Any suggestions woud help us!
    Many Thanks.

    Check your collection refresh interval also is any machines added to the AD group getting populated ie. from the same domain xxx ? if so, i think you need to add the IP sub-net details on the boundary and
    also  discover the another domain machines using LDAP query for it(ex. sccm discovers and manages xxx domain where as its not discovering yyy domain machines becoz its not discovered ,you can also do it using the IP subnet details ie n/w discovery) the
    machines to the ALL systems then it may get added to the collection.
    Kamala kannan.c| Please remember to click “Mark as Answer” or Vote as Helpful if its helpful for you. |Disclaimer: This posting is provided with no warranties and confers no rights

Maybe you are looking for