Issue with Process Overview Action in E-separation Request application

Hello All,
We are using Portal 7.4 version.
And ECC 6 EHP 7.
With respect to E-separation request , we are facing the issue as enclosed in the attachment.
Please suggest whether any BASIS configuration like ADS RFC connection is required for this application to display Process overview.
BR,
Harthi

I see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo

Similar Messages

Issue with Attendance Overview Graphic

Please, kindly help our colleague.
Issue:
In MSS -> Attendance Overview
In the graphic, for "Open request", shows colour BLUE however in the legend shows colour PINK.

Hello Siddharth
Thanks for reply.
I checked the notes, first two are valid if the graph is not displayed at all. The last note discusses the problem with Team Calendar.
We are facing the issue with Attendance Overview. The graph is getting displayed. But instead of pink color (for open leave requests), dark blue color gets displayed, with dark black lines around it.
If there are no open requests, graph gets displayed correctly. Please suggest the solution.
Regards,
Vinod

Issue with processing time of JDBC receiver adapter

Hi all,
We are using PI 7.1 EHP1.
We have an issue with JDBC receiver adapter taking too much time to process messages.
We are using XML SQL format message protocol with INSERT_UPDATE as the document format.
Each message can contain multiple records, i.e. 1 single message can result in many updates/inserts.
Currently, time taken to process in 6-12 secs which is quite high considering the messages are not very large in size.
We sent the statements to Oracle DBA to see if anything about the queries being used is causing issues. Awaiting inputs.
In the mean time, wanted to check if there is anything that can be done from PI side that will help us improving the processing time.
Thanks in Advance,
Sailaja.

Hi,
       i think the main cause is query taking long time to execute in DataBase.
      -> increase the read time and response time in the JDBC receiver adapter.
In the advanced mode table section of sender channel and receiver channel configurations, we can set driver properties for each DB connection. Any such property would have to contain prefix 'driver:'(with out quotes).
For Oracle Database JDBC thin driver 10.2.0.3 version, the property oracle.jdbc.ReadTimeout helps to set read timeout while reading from the socket. Also for setting login time out in Oracle, we use oracle.net.CONNECT_TIMEOUT. To set these two properties use as follows: driver:oracle.jdbc.ReadTimeout 1000 driver:oracle.net.CONNECT_TIMEOUT 1000 The TimeOut Driver properties like ReadTimeout and CONNECT_TIMEOUT are in milliseconds.
Refer note 1078420 for more details
please go through this blog i hope it will help you.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747
regards,
ganesh
Edited by: ganesh.nijampudi on Oct 25, 2011 12:00 PM

Image size issues with processing

New to Adobe, I have had several issues with consumers images. I can not find how to save as jpeg and keep photo intergrity. Either the processer (local pharmacy, big name store.. etc) is cropping my images badly. I have been told this is my problem when I save in jpeg format. How do i protect my image? Resize with the pixels? Please help

Hi,
The most likely problem is that your camera is shooting in a different aspect ratio that you are trying to print in. This usually shows up by either cutting the tops/bottoms off or by cutting the sides off. Alternatively you may get a border top/bottom or sides.
If that is the problem, you will need to crop the photo before getting it printed.
So that we can help, can you please answer some questions.
1) What operating system are you using?
2) What version of PSE are you using?
3) What are the pixel dimensions of the photo or what camera are you using?
4) What size of photo are you trying to print (6" x 4"?) ?
Brian

Issue with applying Event Action filters

Dear friends,
A general question on Event Action filters. There is a signature with sig ID 6257.
The following is the event action filter configuration:
service event-action-rules rules0
filters edit DHCP
signature-id-range 6257
subsignature-id-range 0
attacker-address-range 172.20.20.10,172.20.20.11
actions-to-remove produce-alert
filter-item-status Enabled
stop-on-match True
os-relevance not-relevant
exit
Even though a valid DHCP offer is being given by the DHCP server, this alert is getting fired.
We have even excluded the IP's of the DHCP Servers - 172.20.20.10 and 172.20.20.11 from the Attacker Address range parameter in the signature but still this alert gets fired.
evIdsAlert: eventId=1204853641442197329 vendor=Cisco severity=low
originator:
hostId: IDSM2Core1
appName: sensorApp
appInstanceId: 592
time: April 7, 2008 5:46:48 AM UTC offset=180 timeZone=1
signature: description=DHCP Client DoS id=6257 version=S316
subsigId: 0
sigDetails: Server Offered a Malicious IP Address
marsCategory: DoS/Host
interfaceGroup: vs0
vlan: 200
participants:
attacker:
addr: 172.20.20.10 locality=OUT
port: 0
target:
addr: 10.1.1.78 locality=OUT
port: 0
os: idSource=unknown type=unknown relevance=unknown
summary: 4 final=true initialAlert=1204853641442197267 summaryType=Regular
alertDetails: Regular Summary: 4 events this interval ;
riskRatingValue: 25 targetValueRating=medium
threatRatingValue: 25
interface: ge0_7
protocol: udp
Looking forward to your kind help and advise on this.
Thanks a lot
Gautam

Some things to check:
1) Is the filter in the active list? Filters can be enabled or disabled, but they can also be active ro inactive. You've only show a part of your configuration so I can't tell if the filter is part of the active list.
2) Are there actions other than produce-alert for the signature? Or is an event action override adding other actions?
Produce-alert is not the only action that can cause an alert to be generated. The produce-verbose-alert, request-snmp-trap, log-attacker-packets, log-victim-packet, and log-pair-packets will also cause alerts to be generated. Modify the filter to also remove these actions.
3) The alert you've shown is a Summary Alert. There may be an issue with Summarization and the Filters. Try modifying the signature to set it to FireAll with no summarization.
4) If you have multiple filters then check the order of the filters. If the event is matching an earlier filter where the stop-on-match is set to True, then it will not check the event against this filter. Either move this filter up higher in the filter list, or change earlier filters to be "stop-on-match false".
5) Also check to see if you are running the latest 5.1(7) or 6.0(4) Service pack. If running earlier 5.1 or 6.0 versions you might be hitting a bug that could have already been fixed.
If none of the above help, then contact the TAC. It could be that you may have foung a bug that the sensor development team is unaware of.
To help in identifying the problem take a packet capture of the packets from 172.20.20.10 for several minutes around the time when the sensor is generating these alerts.
This way the team can both check if the signature is firing correctly, and if the filters are working correctly for that signature.

Issues with portal integration of Web dynpro for ABAP application

Hi,
I have the following issues when i integrate a Web Dynpro for ABAP application with portal.
1. the iview does not contain some images, such as table scroll button images, maximize and close buttons of popups etc.
2. the iview loads properly, but there is an error in the status bar that says "Access denied"
3. is it possible to do absolute navigation from
   role1->folder1->iview1 to role1->folder2->iview2?
   when i fire this navigation from the webdynpro
   application, the navigation does not happen in the
   portal.
thanks,
Kavitha

>
sridhar vadaga wrote:
> Hi Experts,
>
>
> CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
>   EXPORTING
>     text           = url
> IMPORTING
>    BUFFER         = content .
>
>
> Thanks & Regards
> Sridhar
I think you are overestimating the power of the SCM_STRING_TO_XSTRING function module. By supplying a URL as the value of the input text, it isn't going to magically go read the content from the remote location and convert that to a binary string. It is going to take whatever value you supply in th importing TEXT parameter convert that to binary. In other words it is literally converting the string http://xxx/test.xls to binary. You will need some other mechanism to read the content from the remote location into ABAP memory before you can process it. You will need to use the CL_HTTP_CLIENT class or call some sort of web service to retrive the content.

Issue with setting an Action Listener for a Command Button

Hi all,
I'm trying to set an action listener for a CoreCommanButton in a backing bean. Here's my code:
     CoreCommandButton editBtn = new CoreCommandButton();
          MethodBinding mb = FacesContext.getCurrentInstance().getApplication().createMethodBinding("#{backBean.doButtonAct}",null);
          editBtn.setActionListener(mb);
//Action listener method
     public void doButtonAct(ActionEvent actionEvent)
I keep getting a javax.faces.el.MethodNotFoundException error. However when I remove the ActionEvent parameter in doButtonAct(), I get a wrong number of arguments error.
So i'm guessing there is something wrong with the parameters i accept in my action listener method. what can be causing this issue?
Cheers.

I figured this out.
Since doButtonAct() requires an ActionEvent object as a parameter, i needed to define the parameter type when I create the method binding.
Solution:
     Class argsString[] = new Class[] { ActionEvent.class };
          MethodBinding mb = FacesContext.getCurrentInstance().getApplication().createMethodBinding("#{backBean.doButtonAct}",argsString);

Issues with processing messages on one receive port causes problems on all the receive ports that are on the same handler

Greetings,
An integrator installed biztalk in our environment to process the hl7 message flow between their source application(s) and several receiving applications. We've had problems with this set-up for a while now because some receiving applications sometimes have
problems processing the messages. Be it either because there's problems with the server that processes the messages of a certain port or because there's problems with the software/daemon/service that needs to process these messages.
The main problem with this, is that the receiving end of this isn't under our control nor under control of the integrator, but when one receive port isn't processing their messages for a while it causes a problem with all the receive ports that are on the
same handler. So other receive ports start noticing a slow-down of their incoming messages until after a while nothing gets through anymore.
What is the best practice to prevent these kind of problems? Should we just create a handler for every receive port? Because that seems a bit overkill.
Thanks in advance.

What do you mean exactly with this question?
"Can you provide some more detail like BizTalk the receiver? "
The adapters are mainly file and MLLP, the MLLP adapters are already seperated from the file adapters (a handler for MLLP and a handler for file).
The problem with all the receive ports is that when one receive port isn't processing its messages (usually caused by the software processing the messages) the other receive ports on the same handler receive their messages/files a lot slower. If for any
reason the problem isn't fixed soon, the other receive ports on the same handler actually stop receiving any messages at all.
Isolating the receive port that causes the problems like la Cour suggested can work, but next time it might be another port that experiences this issue. So we are looking for a way to make sure the whole message flow isn't hindered by one port (whichever
port) that can't process its messages. Or rather by one receiving software that can't process its messages.

Issues with processing on 64bit (java)

Anyone running processing (http://processing.org) on a 64bit machine?
I'm having some issues getting it running, works fine on my 32bit system though.
My error is:
./processing: line 100: /home/action-owl/dev/processing/processing-1.0.9/java/bin/java: No such file or directory
The file does exist, and it's executable, the processing forums have been a bit quiet lately.
Thanks

carlosgottberg wrote:Looking at /usr/bin/processing found out that you have to symlink /usr/bin/java to /usr/share/processing/java/bin/java .
This doesn't seem to work for me, but maybe I'm doing it wrongly... Is this close to what you meant?:
sudo ln -s /usr/bin/java /usr/share/processing/java/bin/java

Issue with process order confirmation

Hi,
I m doing the testing of SAP EHP4 To EHP6 up-gradation. I tried to confirm process order XXXXXX with T-code COR6N.
In this process order there 2 phase for 2 activity. Now when I entered the order in COR6N I click on enter its automatically taken 2nd phase.
Its by-pass the first phase. I have to confirm the 1st phase but its not showing.
Please let me know where is the problem ...what configuration i m missing.
Thanks,
Anurudh

Hi PP guru,
Thanks all of you replay my problem is resolve now. 2nd phase not showing there because confirmation is possible but not necessary so when I click on f4 its not showing. I entered it manually after that it taken it and showing activity also.
So thank u friend once again.
Thanks
anurudh

Edge Animate CC 2014.1 issues with the new Actions Panel

Hi Guys - I am totally confused with the latest undated EA CC 2014.1 actions panel.
With the old one - its was simple :
but the new one - I get nowhere, freezes the program and I cannot edit any actions... Very frustrating - am I doing something wrong or is it a program flaw?
Is there tutorials I can access on the new actions panel?

Strange. I do not think we have seen this. When you choose an action for example, you need to drill down to the element that needs the action and then double-click to apply it. Is it what you are doing?

Issues with Illustrator CS5 Actions

Hello All,
I'm trying to create an illustrator action that isn't functioning properly on playback. I'm using Illustrator CS5 on a Macbook. In setting up for print production of CD's and DVD's, on what's called an OMAP; I have to copy, paste and then place the image at a specific point on the artboard. Then I repeat 143 times. I'd like to create an action that pastes and moves each of the 144 disc images to the precise x and y coordinates given. I've tried creating this action through the steps outlined below, but the result of the playback is never consistent and the images end up off the artboard. Any tips or answers are welcome.
1. Copy disc image from an existing illustrator file.
2. In the action panel of my OMAP template document I create a new action, give it a name and click Record.
3. I hit command>V to paste.
4. In the transform panel I put in the x and y coordinates
(Then repeat)
Update: I was able to create the action in Illustrator CS4 and playback works perfect. However, my client uses Illustrator CS 5 on a PC (as I use most of the time); and, the action will not play back properly in CS 5. I've updated both mine and their software to the latest version of CS 5 (illustrator 15.0.2 i believe) and this action still will not function right. I've tried re-creating the action in CS 5 with no success on playback. For a demonstration of this, please watch: http://www.youtube.com/watch?v=zo_avyQLAFw&feature=youtu.be. Any advice/solution would be appreciated.

I think I may have it solved... or perhaps just a workaround. I duplicate the x axis coordinate in the action's playback. Then rearrange the playback to: paste> x axis coordinate> y axis coordinate> x axis coordinate. This seems to be working for some odd reason. Unfortunately, this doesn't work if the x axis is simply put after the y axis: paste> y axis coordinate> x axis coordinate. The x has to be given before y, then x again: paste> x axis coordinate> y axis coordinate> x axis coordinate = desired result. This is really strange. If anyone has a better solution, please reply. I'll update the actions for my client and see if this works in it's entirety, on windows and mac, and then update this post.

Issue with Process chains in BI (NW2004s)

Hi,
Recently we have done the system refresh (From Production to Quality Environment) for our BI Environment.
After the refresh, our basis team has performed all the post activities like Source system conversion (BDLS), etc.
But now, we are not able to open any process chains.The system is given the information message "<b>Variant &0000000XXXXXX does not exist</b>"
"Message no. DB612
Diagnosis
You selected variant &0000000XXXXXX for program RSPROCESS.
This variant does not exist.
Procedure
Correct the entry."
Is this because of some post-processing steps got missed out?
Do we have to create the Variants (Or can we copy the variants from the old Quality env? as we have the copy of Quality env. database).
If we can create the variants, please let us know the procedure for the same.
Please advise. Points will be awarded for your solution.
Thanks,
John.

I have checked for the variants in the production system for the program RSPROCESS(in transaction SE38). But nothing exists.
When I checked with the Basis team, they mentioned that the tables VARI, VARIT and VARID are copied from the (old)QA system and now they have imported these tables into the QA system after the refresh.
I have never created any variants. Please let me know the procedure to create the variants in SE38.
The process chains are working fine in our Dev and Prod environments. Will copying the tables(VARI, VARID and VARIT) from production will help us?
Is this due to some transports need to be moved from Dev to QA again? How can I find the requests?
Please let me know your suggetion.
-John.

Any known issues with processes 'paralyzing' ?

Hi group
since months we are facing a very strange issue.
Backgound jobs running suddenly for hours, while colleague workprocesses handle exactly the same workload in minutes.
Restarting these 'runaway' workprocesses helps, but is somewhat drastic to the system.
We have Kernel level 230
Any experiences with similar problem ?
Jo

Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

Photoshop CC issue with processing collection from Bridge

Hi,
I'm encounter the error below when processing a photo collection from Bridge us Photoshop CC 2014.2.2.
I have not altered the photos in any way (straight download from camera).
I'd be most appreciative of any guidance with a solution for this.
I'm not a technical person but can get around a PC pretty well.
Thank you.

Thank you for your response.
PATH
C:\Users\ken\Pictures\KJ_Tiffany Wedding 2014
Filename
_DSC1543.jpg
Rgds,
Ken

Issue with Process Overview Action in E-separation Request application

Similar Messages

Maybe you are looking for