Issue with product tops not moving after Upgrade Filesystem installed

All:
I have just installed the R12 tech stack and db in preparation for the upgrade. After this is completed it (rapidwiz) creates an environment file in $APPL_TOP. My issue is that some of the products, based on this environment file, still point to the 11i structure. There are about 10 products which have this issue. What should be done. Any suggestions are appreciated. I have pasted some of the ones that are still pointing to the old structure:
AMF_TOP=/mnt/rd4/oracle/devappl/amf/11.5.0
GRAPHICS60_PATH=/mnt/rd4/oracle/devappl/au/11.5.0/graphs
CSS_TOP=/mnt/rd4/oracle/devappl/css/11.5.0
JTS_TOP=/mnt/rd4/oracle/devappl/jts/11.5.0
Here are some that are pointing to the correct location:
INV_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/inv/12.0.0
IEC_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/iec/12.0.0
AMS_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/ams/12.0.0

kirkladb wrote:
All:
I have just installed the R12 tech stack and db in preparation for the upgrade. After this is completed it (rapidwiz) creates an environment file in $APPL_TOP. My issue is that some of the products, based on this environment file, still point to the 11i structure. There are about 10 products which have this issue. What should be done. Any suggestions are appreciated. I have pasted some of the ones that are still pointing to the old structure:
AMF_TOP=/mnt/rd4/oracle/devappl/amf/11.5.0
GRAPHICS60_PATH=/mnt/rd4/oracle/devappl/au/11.5.0/graphs
CSS_TOP=/mnt/rd4/oracle/devappl/css/11.5.0
JTS_TOP=/mnt/rd4/oracle/devappl/jts/11.5.0
Here are some that are pointing to the correct location:
INV_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/inv/12.0.0
IEC_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/iec/12.0.0
AMS_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/ams/12.0.0Make sure that all these TOPs are set properly in the R12 appliction context file and in all env files under $APPL_TOP directory.
Also, make sure that the 11i env file is not sourced in the applmgr user's profile (i.e. .bash_profile).
Thanks,
Hussein

Similar Messages

HT4623 having issues with activating my iPhone 3gs after upgrading to ios6. Tried activating via itunes but no respite " says No sim inserted". pls help.

Guys, I just upgraded my iphone 3gs to ios6, it took 2 hours get it installed. However asfter installing there are issues with activating it.
Its getting failed every time..."says the activation server is temporarily unavailable".
Tried activating via itunes but no respite " says No sim inserted".
pls help.

No, I did not find a way to fix it. Went to Apple store to be told that the phone is dead and I would need to purchase a new phone. A little frustrated with the fact that it is Apple who caused the phone to not work!

Issues with Master Data Change Run after upgrade 7.3.1

We have upgraded to 7.3.1 on both our BW and ECC clients. When we first run out change run in BW it chose to drop and rebuild aggregates
on changes that usually don't cause a drop and rebuild. They usually do a delta.
Has anyone had this issue once upgraded?
We looked at our performance setting in SPRO for aggregates and the settings have not changed.

I loaded data for 0Material, 4 fields are not getting populated....when I checked in R/3 base table and RSA3, I am able to see data for those 4 fields. But in PSA and 0MATERIAL I am not seeing data for those fields.
THose 4 fields are Z fields mapped to Standard fields in MARA table.
As you say you can see the values of these fields in RSA3, We can rule out that the fields arent hidden. Check the mapping on the BI side, do you have all the Zinfoobjects added to the Omaterial and the corresponding mapping of source fields to target fields.
0CUSTOMER_ATTR has some data...I added new field in datasource as well as in BW also. After creating transformation I executed the DTP, it is throwing same error in every data package
"Record filtered in advance as error records with the same key exist".
Load till PSA is Init with data transfer and DTP is delta.
there are some duplicate records in the master data values that are coming in. You can manually change them in PSA and load. And if you are sure the duplicated records can be dropped, you can tick the HANDLE DUPLICATE RECORDS in DTP - update tab

Photoshop CS6 issue with shortcuts and my keyboard after upgrade from CS5

I recently upgraded from CS5 Extended to CS6 Extended on my Mac (Mavericks), but installed it in English instead of German this time. I transferred most of my presets just fine, but none of the keyboard shortcuts were working. All I got was an unequal sign for all shortcuts and even manually changing them didn't get them to work. I found a few discussions about this issue and ended up adding a German keyboard, as I am always on the Romaji setting of my Kotoeri (Japanese) keyboard. That seemed to solve the issue, but only if I change to the German keyboard before opening Photoshop. Shortcuts don't work in CS5 anymore either unless I do. Sometimes the shortcuts also stop working a while after I change back to the Kotoeri keyboard.
Now I would like to know if there is any way to get around this issue. Isn't there a way to get my shortcuts working again without constantly having to change keyboards? I much prefer the Kotoeri one since the icon for the German keyboard in my menu bar looks extremely obnoxious, in my opinion. It's mostly a cosmetic thing to me, but I would love to get everything back to the way it was before.
I'd much appreciate any advice or help.

I am having a similar problem. Just upgraded to Apple Yosemite and all none of my keyboard shortcuts are working in a clean install of Photoshop CS6. Every menu item has some form of the ≠ sign. I've trashed the .plist file, rebuilt permissions, etc. Even basic keyboard commands, like Command-N for NEW or Command-Q for QUIT do not work. In fact, many don't show up in the menu at all. I don't have this issue in InDesign CS6 or Illustrator CS6. Every once in awhile, maybe 1 time out of 20, menus and keyboard shortcuts work properly, but I can't find any pattern.

TS1424 Issue with purchasing song on itunes after upgrade!!!

I recently purchased Dark Horse by Katy Perry AFTER i upgraded my phone to the new iso7. During the purchase i agreed to the updated T & C's and confirmed to buy, but then it frose and it woudlnt let me do anything.
The song has not downloaded to my itunies library on my Iphone 5 or PC, nor have i recieved recipt & it wont let me purchase it again as it states i have already purchased the track.
Can someone help with this??!!

Does it show in the Purchased tab in the iTunes store app on your phone for (re-)downloading (music can't be redownloaded in all countries) ? You should also have a Purchased link under Quicklinks on the right-hand side of the iTunes home page on your computer's iTunes. If not then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Issues with my Flex 2 project after upgrading version of Flash

This has been happening for some time now....
I work in a computing environment where software/security updates are sent to workstations over the network automatically. Everytime a new version of the Flash player gets released and pushed over the network, I have interesting/wierd problems develop in my flex application.
Today, we recieved the push of the nesest version of the flash player (10.0.22.xxxxxxxx). Anyways, not I am getting my events throw in a different order, and the focus manager can no longer find which object to give focus to, resulting a null object reference (within a core flex class, not my own code).
This happens with every new version of the player that is released. If I go back and use my code on a machine which has the older version of the player (say a vesion 9) it works perfectly!
Also, since I got this update today, my shared objects no longer load completely or correctly. What I did was encrypt my data, parsed it as xml, and then sent this object to be saved into the SOL file. They don't work the same anymore. But the same code ran on a version 9 player works flawlessly.
This happens consistantly with upgrades of flash player, just different issues crop up, and I cannot request my network admin not upgrade the flash player, as it would effect over 10k workstations.
I am at my wits end here! Anything, anybody got a bone to throw my way? Any ideas?

Hello, rjcjsc.
Thank you for visiting Apple Support Communities.
I understand that your Mac is restarting because of a problem and appreciate you including the log file. Here are the most relevant troubleshooting steps for this issue. However, the most likely cause for this would be your security software, Kaspersky.
Software troubleshooting
Disconnect the external drive used in the above test to determine the kernel panic is due to a software based issue.
Start the Mac from OS X Recovery and reinstall OS X on your Mac.
Start from the installation of OS X you just created.
Use Software Update to install all updates until it reports "Your software is up to date."
Download and install any third-party software updates before reinstalling third-party software, especially drivers and kernel extensions.
Examples include:
Virtualization software
Drivers for add-on third party display cards
Anti-virus software
Networking software (especially software which enables third party network devices)
Add-on file system support software; for example, software that lets your write to NTFS formatted media.
If the issue continues, you will need to erase and install OS X as follows:
Start the Mac from OS X Recovery.
Complete a disk image backup via Disk Utility of the internal drive to an external drive with enough free space.
Erase the internal drive using Disk Utility.
Install OS X.
Start from the internal drive.
Use Software Update to install all updates until it reports "Your software is up to date."
Re-install your third-party apps and copy your user data from the disk image backup you created in step 2.
Note: Avoid copying data from the /Library and /System folders on your backup disk image.
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
http://support.apple.com/en-us/HT200553
Cheers,
Jason H.

I'm having major issues with iphone 5 wi-fi after upgrade to ios8

Ever since upgrading my iphone 5 to IOS8 my wi-fi becomes really slow or completely unresponsive. I try restarting phone and routers which does help short term, but then they become slow again.

settings - general - reset - reset network settings - you will need to re enter known wifi password again.

IPhone Home Button not working after upgrade to ios 5.1.1

Hey everyone,
I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
It's out of warranty and I don't have apple stores where I live.
I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
Any apple dev around that can give me a workaround?
thanks a lot in advance
Added more info ~

I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
1. Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150.
2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
3. The Home button still was intermittent. I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds. This doesn't work if the Home button doesn't respond.
4. I connected the iphone to Itunes via the USB to sync the phone. While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously. I noticed the Home button responded better when connected to ITUNES via the USB.
5. I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
The phone worked consistently before I had to do this.
6. As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings. This would have made sure that the backup didn't include the bug.
Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4. So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG

Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

You will not belive how I accidently solved this - !!!
Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
what a mad techno world we live in! :-)
Dave

Super drive issue not working after upgrade of Maverick or Mountain Liont

Super drive issue not working after upgrade of Maverick or Mountain Liont
try this commands , it will wrk and respond after few trys
go to APPS - Utiltiy - Terminal
Put these commands in
drutil status
drutil info
drutil getconfig
drutil eject
it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one .

Super drive issue not working after upgrade of Maverick or Mountain Liont
try this commands , it will wrk and respond after few trys
go to APPS - Utiltiy - Terminal
Put these commands in
drutil status
drutil info
drutil getconfig
drutil eject
it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one .

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

IPhone Bluetooth not working after upgrading to iOS 6.1.2

I used to pair my iPhone with my Blue&Me system in my Fiat Car and it was working perfectly hitherto. Recently I have been experiencing problems with Pairing my phone with my car Bluetooth system (Which I sometimes use for receiving calls).. The phone though identifies the car system in the discovery mode but is not able to pair and establish connection. My car Bluetooth system is working just fine with other phones. Request apple / or anyone who can help to help me overcome this issue. My car system is as important to me as iPhone and if this problem persists, i may be forced to change my phone.

In the 4+ years of using iPhone and several other apple products, this is the first time that I am feeling frustrated with my iPhone 4S and Apple. I am surprised that so many people around the world are facing the problem with their blue tooth devices after upgrading the iOS and still there is no hope of having this situation resolved. The cause of breakage of communication between iPhone (my investment, my ownership) and other devices is of apple origin and apple can't walk away by suggesting that the other party should upgrade the Bluetooth Firmware.
In my case, My iPhone 4S stopped paring with My Fiat car blue&me system after updating to iOS 6.1.2. The problem has not been solved in iOS 6.1.3.
If this problem is not solved in next update the ovious solution is to move to android as I can change my phone but I can't change my car that eaisly.

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion)

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion).
Hello Apple! Anybody there? How long does your community have to wait for a solution?
The same problem has been unsolved for months now. No statements from Apple either.
I was told today to wait for 10.8.3. This might solve the issue. I can not belive my ears.
My MacBookPro 4,1, Intel Core 2 Duo with 2.5 GHz Processor and Graphics chip: NVIDIA GeForce 8600M GT, will not talk to the exter. 20" Cinema Display ( Model Number A1081 ). The screen stays black. Resetting the PRAM did not help. I removed the 'com.apple.windowserver.plist' and the 'com.apple.windowserver.OE35739etc,etcxxxxxxxxxxx.plist', but that did not help either.
Any other solutions, or do I have to downgrade or give up on Apple Computers alltogether after using them for over 25 years?

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)

     My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
3. I tried to connect to other public area's free network via WIFI, however never joined in.
     I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
     I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
Terrence

I have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !

Issue with product tops not moving after Upgrade Filesystem installed

Similar Messages

Maybe you are looking for