Issue with Publications in BI 4.1 SP3 patch 2

Hi Team,
We created 100+ publications with One database fetch for all users property .
As per requirement we changed this property to one database fetch per user.But still publication schedules are running in Administrator account.
We noticed , when creating new schedule from the publication is getting the one database fetch per user property and hitting database with enterprise user account.
there are 500+ instances in publications,so it is going to be hectic task to create new schedules and there might be chance of going wrong also.
Is there any way to correct it in some files in BIP ?

Why do you need to create 500 instances of schedules? How are you getting the users to publication? Are they dynamic users or enterprise users?
If you have a report which gets all the users in the publication, there is no need to create hundreds of schedules for each user.
'One DB fetch per each user' function - will fecth the data for each user in the publication (Enterprise or Dynamic users) while running the publication.

Similar Messages

  • Issue with Default Variable in WAD after Java Patch 7.01.7.31

    Hello all,
    I'm running into an issue with the Web Application Designer Template execution for a particular default variable. This started occuring after Java Patch 7.01.7.31 we had implented over the weekend.
    The issue is when Executing the WAD Template, we have a selection screen with a variable with default values assigned to it. When leaving the default values and hitting Ok to execute  through the screen does not register and stays as is and I get a message at the top with the following: Characteristic Prob % Number has no master data for "1.00" or you do not have authorization.
    This only seems to occur for this default variable on info object Prob % Number, the other default variables seem to work fine. Also another note when clearing out the values it returns data and executes through. The value 1.00 is also a valid value in the cube and also in the output display. If we run this report in the BEx analyzer, the selection screen executes through with the default variable perfectly fine, this is only an issue with the Web Application Designer Template.
    Has anyone ran into this? I've searched and have not found any notes as of yet.
    Thank you,
    -Andy

    Dear Andy,
    Please raise this to SAP, seems like a strange problem this needs to be addressed by OSS note only.
    Close this thread once you get a solution.
    Regards.
    Den

  • Performance issue with Combo Box in xcelsius 2008 SP3

    Hi Experts ,
    I started working on xcelsius 2008 , Later we migrated to Xcelsius 2008 SP3 . After migrting , performace of combobox went down and combox is taking time to scroll down the values . Did any one face this issue . Please help me out . My customer he is worried about Combo box performance .
    Many thanks in advance .
    Regards,
    Dirasa

    Hi,
    Even I am facing the same issue...kindly let me know if you were able to make it work...or fix it.
    Thanks in advance
    Seema

  • IPhoto and Facebook - Syncing issues with publication error

    I am having trouble with the syncing function using the facebook icon at the bottom right of iPhoto '09. I create a facebook album with several photos, and it seems to take the appropriate time to upload the photos. But when I go to Facebook, there is only a few, if any photos in the album. It did create the album, however. I delete the album and repeat the same steps, and a different amount of photos would upload this time, but nowhere near the correct amount. Also when i try to sync the albums again, usually an error message comes up saying...
    "An error occurred with the publication of album "(Album Name)." Do you want to remove the album from your library?
    And then in small print
    "The feed could not be found or is invalid."
    And then the option to remove or keep the album.
    Why am I having syncing problems?
    For now I am using the Export function and a facebook plugin which works fine, but I want the ability to add photos to libraries and sync rather than using the export function.

    Same problems here, multiple albums. It will upload a couple photos, then say it can't find the album.
    (then Keep or Remove Album blah blah, because that's a good feature. oh wait, we couldn't find your photos, so we'll just throw em all out, cool?)

  • Issue with applet and Weblogic 8.1 SP3

    Hello,
    I have an applet that is making EJB calls to a Weblogic 8.1 SP2 app server via an IIS web server. The weblogic.ejbc tool was used to generate the stubs and skeletons and deployed into the applet.jar. The applet comes up fine in this scenario. But when this applet is connected to a Weblogic 8.1 SP3 app server it failes to come up. Apparently, there is some dependency between the ejbc generated stubs and skeletons with the service pack that is being used. One way of solving this problem is to generate separate stubs and skeletons for each service pack but I would like to avoid doing this and would like it to be transparent to the applet. Is there any configuration that I can make which can help solve this problem ?
    -Vijay

    You could check up for the relaease. I don't think there was such a change in SP3. But generating the stubs and skeletons again will definitely solve. You might even test it backwards (generate on SP3 and test on SP2).
    xH4x0r

  • Issues with creating EXE in LV 9 (w/ patch)

    When creating an executable in LV 9 (with the new patch installed), it is taking around 7 to 8 minutes to create the executable... where as in LV 8.5 it only took around 1 minute (same VI no changes).
    After the EXE is done I go into my build folder and find the following folders:  NI_HTML, NI_report, NI_Standard Report (these all containing actual VIs (not executables) from the above folder llbs.   This never occurred in 8.5 nor in 7...what's going on here?  I've got a few customers waiting on the EXE and am just stalled due to this.

    This is a joke right?  "cleaner method of distribution"? 
    So I have to do more work to upgrade NI's lower level LLBs in LV 9 when in the 1st place I paid NI to upgrade from 8.5 to 9... doesn't seem close to an upgrade (in regards to plug & play quality) to me!  The resource page that supposedly shows you how to fix this issue is vague!  ???????   Geesh.
    Maybe this is a better way to do things with the "Object Oriented Program" & Classes... though, for a someone only a few years deep in LV...this is not efficient at all (NI is going to start killing it's marketable value if they make this any more difficult).
    "Solution:
    The Report Generation Toolkit 1.1.3
    released with LabVIEW 8.6 was rewritten using LabVIEW classes and
    LabVIEW Object Oriented Program. Because of these changes and the
    improvements in performance, there are some files that currently are
    added explicity to the build directory. Therefore, the behavior is
    expected and the executable will run without problems. In a pursuit of
    a cleaner method of distribution when configuring the Build
    Specifications for executable, all the generated folders can be placed
    into one support directory."

  • ACS SE 4.1.1.23 patch 5 issue with users

    HI There, I am facing very weired issue with ACS SE 4.1.1.23 patch 5. I am trying to add users in ACS it is added successfully but I can not see these users when I click list all users.
    But I can see users are increasing in groups when I add users..but when I do list all users it say there are no users defined. and I tried to login with newly created users from devices  ....I am able to login with those new users.....
    also when I go to that particular group in which I added new users....and say list users in group...I get message from ACS saying that "can not read users from group" ....
    what could be issue any one has any idea....customer complained that he was unable to login to devices...with the users created on ACS...when I saw there was no users in database....then I added 2-3 users by looking at old passed and failed authentication... but I dont know how users got deleted automatically...even I tried to see appliance audit logs...could not see any thing which indicates someone deleted users...
    please help me to solve this issue..
    Thanks

    Issue resolved. The CRL that was being parsed from the cert was one level higher than the CRL that needed to be checked. The User CRL was ppointing to the Intermediate CA's CRL. I had to manually change the URL from this:
    http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20Intermediate%20CA%201.crl
    to this:
    http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20User%20CA%201.crl
    Mark

  • Are there any compatability issues with V6 and Norton 360 as there have been in the past?

    When I last tried to upgrade to a newer version, a number of my Norton 360 features would not function and I got a popup message saying that there was some sort of compatability problem. I've subsequently had to go back to V4.

    Ne there aren't any "issues" with Norton. Norton released a compatibility patch for Firefox 6 last Tuesday, a couple of hours after Firefox 6 was released.
    http://community.norton.com/t5/Norton-360/Update-Available-Firefox-6-0-Compatibility-Patch/td-p/512484

  • Issue With Report Builder After Installing SP3 for SQL 2008 R2

    Hello.  We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend.  You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
          Server  : Microsoft-HTTPAPI/2.0
          X-AspNet-Version: 2.0.50727
     Application url   :
    http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
          Server  : Microsoft-HTTPAPI/2.0
          X-AspNet-Version: 2.0.50727
    IDENTITIES
     Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
     Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
    APPLICATION SUMMARY
     * Online only application.
     * Trust url parameter is set.
    ERROR SUMMARY
     Below is a summary of the errors, details of these errors are listed later in the log.
     * Activation of
    http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
      + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
    COMPONENT STORE TRANSACTION FAILURE SUMMARY
     No transaction error was detected.
    WARNINGS
     There were no warnings during this operation.
    OPERATION PROGRESS STATUS
     * [10/15/2014 9:35:56 AM] : Activation of
    http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
     * [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
     * [10/15/2014 9:36:29 AM] : Installation of the application has started.
     * [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
     * [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
     * [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
    processorArchitecture=msil.
     * [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
    processorArchitecture=msil.
     * [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
    ERROR DETAILS
     Following errors were detected during this operation.
     * [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
      - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
      - Source: System.Deployment
      - Stack trace:
       at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
       at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
       at System.Deployment.Application.ComponentVerifier.VerifyComponents()
       at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
    notification, DownloadOptions options)
       at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
       at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
       at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
       at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
    COMPONENT STORE TRANSACTION DETAILS
     No transaction information is available.

    Hi DMcGarveyt,
    This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
    Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Exchange SP2 to SP3 RU7 upgrade and any know issues with the Dialogic Gateways

    We are planning on upgrading out Exchange servers from SP2 to SP3 RU7. We are currently using an Avaya phone system and have Dialgoc gate2ways between these systems to allow us to get the voice mail into the end user's mailbox as a wav file. We are using
    the DMG2120's with code many years old. Has anyone had any issues or know of anyone that has had issues?

    Hi,
    I have checked the your question from our internal channel and did not find any related compatibility issues with the update. I also check the third-party forum but still cannot find any threads about any potential issues.
    I think we can feel free to do the upgrade. If you would like to double confirm the question, you can also ask a question in Dialogic forum for more help:
    http://www.dialogic.com/den/developer_forums/f/default.aspx
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
    make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Additionally, there is an article about the IP gateway partners, AudioCodes and Dialogic, to add to the list of PBXs that are tested
    by Microsoft currently:
    http://technet.microsoft.com/en-us/library/ee681657(v=exchg.141).aspx
    Regards,
    Winnie Liang
    TechNet Community Support

  • Issue with Exchange 2007 SP3/Outlook 2010 User account Auto accepting Appointments

                                
    0
    Hi
    I have an issue with 2 users who's appointments are being Auto-accepted or Auto Declined. As these are User Mailboxes there is no resource scheduling set on these. I've also checked for delegates (none), Rules (including running outlook.exe /cleanrules).
    If I send the user some test appointments when they are not logged into Outlook, the appointments are not processed. If the user logs in through OWA then the appointments are not processed. When the user logs into Outlook 2010 (using Mapi) the appointments
    are processed within 5-10 minutes. I started to think it may be a PC issue, something buried in the registry. But I give myself full access to the account and logged in from my machine using Outlook 2010, the appointments are auto processed, again, within
    5- 10 minutes .
    Lots of stuff on the internet all pointing to Resource scheduling, delegates or Rules but I have now discounted all of these.
    If I check the users MailboxCalendarSettings, AutomateProcessing is set to AutoUpdate and not AutoAccept. The Outlook Client has all settings in Resource Scheduling unticked.
    Thanks
    Darran

    Hi Darran,
    If there is no delegate configured, no rules and calendar processing is also set properly, please switch Outlook to Online mode to check whether the issue persists. Also close Outlook and receive test meeting request directly in OWA to double check the mailbox
    would not automatically process the meeting in OWA.
    If the issue happens in Outlook Online mode but not continues in OWA, please restart Outlook in safe mode or change a new computer with fresh Outlook 2010 to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Issue with Analysis Office Add in

    Hi,
    User are having an issue with Analysis Office and giving the error.
    From Analysis Office-> Open workbook->after Login to AO using BW connection
    After opened the report ->when refresh the report, getting the error
    "An Exception occurred in one of the data sources. SAP BI Add in has disconnected
    Nested Exception. See inner exception below for more details
    Initial RANGE-LOW for customer exit variable ****_EXIT_001 corrected ..
    Under details
    An exception has occurred in one of the data sources.
    SAP BI Add-in has disconnected all data sources.(ID-111007)
    We are using BO AO for MS Office Add-in 1.4 SP3 in BO server.
    Please let me know the reason for this error and how to fix this.
    Thanks in advance.
    Jayakrishna

    Hi Krishna,
               Thanks for the reply.  The Sales office field is directly mapped  in the transformation and does not have any routine. Its the Key field.
    The Billing Document Condition infocube is being feed by the DSO '2LIS_13_VDKON - Billing Document Condn' and datasource is '2LIS_13_VDKON'.
    The Open Orders infocube is being feed by the DSO Document Order item / Delivery;  below which we have another 3 DSO.
    1st DSO has the Datasource '2LIS_13_VDITM'
    2nd DSO has the Datasource '2LIS_11_VAITM'
    3rd DSO has the Datasource '2LIS_11_V_SSL'
    The Sales Office 7 has txn records for the month of April & May.
    The report built on top of a Multiprovider and the for the months June and July, we have txn records fine for the sales office 01 - 06.
    Please help me, if i am missing anything here and make me to understand better.

  • Issue with parallel operation of SAP NW SSO 2.0 and SNC Client Encryption (Logon Groups)

    Hi!
    One of our customers is using the SNC Client Encryption solution to ensure encryption using SNC (based on Kerberos Technology) for their SAP GUI Dialog connections. They have lots of SAP backends DEV, QAS, PRD all with the SNC Client Encryption SNC Lib installed. The profile parameter snc/identity/as contains the following value: p:CN=SAP/<ServiceAccount>@<DOMAIN>.
    Example: p:CN=SAP/[email protected]
    The customer is using one AD Service Account "SNCServiceUser" with one registered SPN "SAP/SNCServiceUser" for all systems (yes, this is not recommended... but the case).
    Important: All users use group entries in the SAP Logon (saplogin.ini). Means, for SAP logon the SNC name can not be manually configured on the SAP Front End. With group logons, the application server's SNC name is dynamically requested by the message server each time a SAP GUI connection is started. The SNC Name is greyed out in this case as dynamically obtained from the applications servers profile parameter snc/identity/as.
    Now our customer implements SAP NetWeaver Single Sign-On 2.0 within his landscape. Based on the Secure Login Server 2.0 (SP3) he likes to use X.509 based authentication to his AS ABAP backends using SAP GUI SNC while others still use SNC Client Encryption.
    Replacing the SNC Library on the AS ABAP
    The Secure Login Library 2.0 (SP3) has been installed on one of the ABAP systems and the SNC Client Encryption SNC Library (which is based on SSO 1.0) is no longer used, thus we changed the parameter snc/gssapi_lib to point to the new SNC library. We removed the old PSE.ZIP containing the keytab and created the new SAPSNCSKERB.PSE incl. the keytab and proper credentials. To ensure parallel operation, we kept the snc/identity/as value as is =  p:CN=SAP/[email protected].
    After restarting the system with initialized Secure Login Library 2.0, still the SNC client encryption works fine for existing users.
    The problem
    We created on the Secure Login Server an SNC certificate for the AS ABAP which has the following X.509 Distinguised Name Fomat: CN=SAP/[email protected] This is to avoid having to change the snc/identity/as to an "real" X.509 DN which would lead to non-working SNC Client Encryption for all the other users using SAP GUI and logon groups.
    As soon as we install the PSE via STRUST on the system the SNC Client Encryption solution stops working with error „Server refuses kerberos key exchange“.
    As part of an pilot implementation we have installed Secure Login Client 2.0 (SP3) on some test PCs. The test PC with SLC is able to perform Single Sign-On with SNC based on X.509 (incl. Encryption) to the ABAP system.
    Seems the SAP System now only tries to do X.509 based authentication thus key exchange fails. The problem is, we cannot change the snc/identity/as value because of the logon groups. If we were able to do so, we would in any case set the server identity to X.509 DN and in addition create the SAPSNCSKERB.PSE incl. keytab. This should work, as confirmed by SAP see this post.  
    Any ideas how to solve this and have both solutions in parallel?
    Appreciate any help.
    Regards,
    Carsten

    Hi all,
    we was able to fix the issue. It was an issue with the customers cluster configuration and the  $SECUDIR variable. This tricky issue leads to non working or sporadic working SNC Client Encryption...
    This was how the configuration looks before:
    Environment variable $SECUDIR is defined:
    "/ABCDEF<SID>/usr/sap/<SID>/DVEBMGSxx/sec“
    sapgenpse seclogin -l -v
    running seclogin with USER="<SID>adm"
    Credentials for username '<SID>adm':
    0 (LPS:OFF):
             (LPS:OFF): /ABCDEF<SID>/usr/sap/<SID>/DVEBMGSxx/sec/SAPSNCSKERB.pse
    1 (LPS:OFF):
             (LPS:OFF): /usr/sap/<SID>/DVEBMGSxx/sec/SAPSNCS.pse
    After changing the $SECUDIR to "/usr/sap/<SID>/DVEBMGSxx/sec“ and re-creating the credentials, it worked like a charm.
    As a result of this we can confirm, this configuration and SNC Client Encryption works with CommonCryptoLib in parallel to the SSO configuration.
    And Valerie was right with 2. SLC starting from V. 1.0 SP2 PL3 was able to convert the CN= part of the SNC Name into an SPN, was my mistake. In addition SNC Client Encryption starting from Version 1 SP1 PL1 does this also.. just to make this clear
    Thread closed hope this helps someone
    Carsten

  • Issues after installing Hotfix Rollup 5 for SP3

    Hi,
    Last weekend we installed Hotfix Rollup Pack 5 for SP3 on our (single) Exchange 2010 Enterprise server.
    This was needed to fix the WebApp Light issue with IE11 and to fix the problem where users were unsable to delete mails sent from multifunctionals.
    These 2 issues were fixed by installing the hotfix rollup pack, but now our users have different problems...
    Some users (not all of them, haven't found a common denominator yet) report that they don't see new mails in their Outlook 2010 box, even though they got the envelope notifier.
    When they change folder and back to the Inbox the new mail is suddenly visible.
    Same sort of "delay" happens when users mark a message for follow-up or try to change a message from unread to read.
    Some users also report that they see delegated mailboxes (mailboxes from other users that they have full mailbox access to) twice in their Outlook 2010.
    Outlook 2010 is running in online mode (because it's running on terminal/citrix servers), so it's no issue with caching as far as I understand.
    I've already checked if there are any updates for Outlook available, but we've installed them all already.
    I though I'd found something:
    Noticed a lot of errors in the application log on the Exchange Server which pointed me to this:
    http://theintegrity.co.uk/2010/08/mapi-session-exceeded-the-maximum-of-500-objects-of-type-objtfolder/
    I've added the registry values now with a value of 1500, but unfortunately this didn't help.
    The errors in the eventlog are gone, but even after restarting the IS some users still have these problems.
    One user reported that it takes about 7 minutes for a read mail to actually switch to "read" when looking at his inbox.
    Did anyone else notice these problems? And maybe have a fix for them?
    I really don't want to roll back the update :(
    I even rebooted the Exchange Server after installing the rollup even though that wasn't even necessary
    Thanks in advance!
    Regards,
    Jeroen

    Correct - http://support.microsoft.com/kb/2925273 discusses this issue.
    If you do raise a support case to request this, please ensure that you review and understand the requirements for IU installation and removal.
    For example:   You *MUST* manually remove it prior to installing Exchange 2010 SP3 RU6.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • CR2008 connectivity issue with BOE Universes(sap and non sap universes)

    Hi Experts !!
    Recently we tried to build/connect to a Universe in Crystal Reports2008 via 'Make a new connection tab'.
    The universes are of SAP BW or non SAP Lying in BOE Servers and we are trying to build reports on them by conncting/utilizing the universes as a database for Crystal Reporting.
    Our issue is most of the time we are not able to connect to the Universes and the connectivity blows out by some 'communication Error' thing initially.
    While at some other points in time, the connectivity takes us to the Universe and we are able to select few characteristics and key figures from the Universe but the moment we go futher and try to run by pressing 'OK' button it blows out and say' LOGON FAILED'.
    Apparantly, it is an connectivity issue with BOE server and from the different blogs it looks like it is a known issue for long.
    The proposed issue resolution were like either CR2008 should be SP2 with BOE SP3 or there should be some additional .dll files defined in the paths in case of MSSQL database. None of this applies to us as we are on CR2008 with SP3 and going back to SP2 is probably not a viable option for us, and we are using Oracle as underlying database in this specific case.( i would like to tell you here that we are able to connect to Oracle Database directly though).
    We have raised a message with SAP and was just wondering if we do have some solution/workaround already available to this known issue in place please?
    Thanks&Regards.
    Edited by: AMIT GHILDYAL on Aug 1, 2011 2:41 PM
    Edited by: AMIT GHILDYAL on Aug 1, 2011 2:44 PM
    Edited by: AMIT GHILDYAL on Aug 1, 2011 3:14 PM

    Hi Amit,
    Moved to Universe Forum.
    If you have a case logged then no point posting here also, this is a public site and not a case management tool.
    Once you do get the solution from your case please post it here also to help others if they have the same problem.
    Thank you
    Don

Maybe you are looking for