Issue with Query Designer

Hi Guys,
I am using 3.5 query designer.i have a requirement in a report.There is keyfigure structure developed which has key figures defined for eg Actual,target etc.This structure is is been restricted as whole by posting period ie 1,2,3 &4.so all the keyfigures will by defult display in posting periods ie 1,2,3 &4.I have a requirent to bring a new KF in the structure say forcast which has values for 1,2,3&4.Now i need another kef which compares only the target Posting period 4 value with all the posting period values of forcast.On which i will create an indicator.Could anyone help me in creating this new KF out of the structure so that it displaysonly the posting period 4 values of target.If i incude in the structure and restrict it with posting period 4,it comes up again with 4 coulmns for posting period which again makes it difficult to compare.
thanks
panchan

Panchan,
I am not so clear about your requirement.
But what i understand from below question is
You have created some KPIs with YTD fiscal year period reqtriction. and used the Fiscal year period in drill down.
Now you want to create 1 KPI with selected fiscal year period restriction, but you can see this column in all 4 fiscal year period.
but you want to see that in only 4th(selected) fiscal year period.
am i right?
if yes then use zero suppression with rows and column, as new KPI contains value in only 4th period, other 3 period will be suppressed by above setting.
Regards,
Ashish

Similar Messages

Sap bi authorizations issue with query designer..

i am using bw 3.x and bi 7 query designer with different kind of probs?...
i am able to see the info provider in query desinger 3.x. but i can see only cubes .i am not able to find dso or infosets or multiprovider.. can anyone suggest is there any authorizations issues..please suggest.
and with BI 7 query designer i am not able to see info providers in info areas folder to design a query..
please suggest if any authorizations should be added or not

hi suman chakravar,
thanks for replying,
can u be little bit clear about the steps.
i went to tcode su01 and entered profile 0bi_all..it doesnt work.
and executed tcode su56.there i can find list of BI related authorization profiles
i added s_rs_all profile to my user. even then i face the same problem.
i can see only queries in query designer of bi 7 format and i can not view info providers.
i can view only cube and infosets and i can not view dso and multiproviders in bw 3.x type query designer
Edited by: satishchow on Dec 14, 2011 3:23 PM

Performance issues with query input variable selection in ODS

Hi everyone
We've upgraded from BW 3.0B to NW04s BI using SP12.
There is a problem encountered with input variable selection. This happens regardless of using BEx (new or old 3.x) or using RSRT. When using the F4 search help (or "Select from list" in BEx context) to list possible values, this takes forever for large ODS (containing millions of records).
Using ST01 and SM50 to trace the code in the same query, we see a difference here:
<u>NW04s BI SQL command</u>
SELECT
"P0000"."COMP_CODE" AS "0000000032" ,"T0000"."TXTMD" AS "0000000032_TXTMD"
FROM
( "/BI0/PCOMP_CODE" "P0000" ) LEFT OUTER JOIN "/BI0/TCOMP_CODE" "T0000" ON "P0000"."COMP_CODE" = "T0000
"."COMP_CODE"
WHERE
"P0000"."OBJVERS" = 'A' AND "P0000"."COMP_CODE" IN ( SELECT "O"."COMP_CODE" AS "KEY" FROM
"/BI0/APY_PP_C100" "O" )
ORDER BY
"P0000"."COMP_CODE" ASC#
<u>BW 3.0B SQL command:</u>
SELECT ROWNUM < 500 ....
In 3.0B, rownum is limited to 500 and this results in a speedy, though limited query. In the new NW04s BI, this renders the selection screen unusable as ABAP dumps for timing out will occur first due to the large data volume searched using sequential read.
It will not be feasible to create indexes for every single query selection parameter (issues with oerformance when loading, space required etc.). Is there a reason why SAP seems have fallen back on a less effective code for this?
I have tried to change the number of selected rows to <500 in BEx settings but one must reach a responsive screen in order to get to that setting and it is not always possible or saved for the next run.
Anyone with similar experience or can provide help on this?

here is a reason why the F4 help on ODS was faster in BW 3.x.
In BW 3.x the ODS did not support the read mode "Only values in
InfoProvider". So If I compare the different SQL statements I propose
to change the F4 mode in the InfoProvider specific properties to
"About master data". This is the fastest F4 mode.
As an alternative you can define indexes on your ODS to speed up F4.
So would need a non-unique index on InfoObject 0COMP_CODE in your ODS
Check below for insights
https://forums.sdn.sap.com/click.jspa?searchID=6224682&messageID=2841493
Hope it Helps
Chetan
@CP..

Issue with Query on a virtual infoprovider

Hello,
I am getting the following error message while executing a query on a virtual infoprovider. We have recently gone through upgrade from BI 3.5 to BI 7.0 EHP1 (SP5) and from SEM BCS 4.0 to BCS 6.0.
EVersion not specified or not unique                                                             UCR0                006
EError reading the data of InfoProvider ZBCS_CV11                                    DBMAN             305ZBCS_CV11
EError while reading data; navigation is possible                                          BRAIN               289
I>> Row: 11 Inc: RAISE_READ_ERROR Prog: CL_RSDRV_VPROV_BASE   RS_EXCEPTION        301CL_RSDRV_VPROV_BASE
this query has been running fine before the upgrade. In the selection screen there are two fields - version1 and version2, if I am specifying same value in both the fields then the query runs fine and if I am providing different values then the above stated error message appears.
I have tried different settings with properties - Read mode: H,A,X and also different combination from the properties of the virtual infoprovider - with and w/o hierarchies; with and w/o navigation attributes but it did not workout.
the only thing which has changed on this virtual provider is that I had enabled delta caching as this was supposed to be used in a multiprovider.
Has anyone experienced similar issue or have an idea as to what is going wrong here. Please advice.
Regards,
Manish

Hi Manish,
I have exactly the same issue with a query on a virtual infoprovider after upgrading from BI 3.5 to BI 7.0 EHP1 (SP5) and from SEM BCS 4.0 to BCS 6.0.
Would you be so kind to tell me how you fixed this. (other queries seem to be working)
Kind regards,
Jamie Flaxman

Issue with Output designer and Konica bizhub Pro 920 Driver:

Hi, i would appreciate if someone could help me with the following issue:
I have designed a document using Adobe Output Designer and need to print it on Konica printer which uses above driver. Konica is not included in Adobe Presentment Target List so i am trying to use a Generic Postscript L2 - (PSLEVEL2) presentment target. I want to make few changes to this driver to match it with destination printer settings. e.g Output Order should be Face Up, Input and Output Tray should be Auto, Print position should be Left etc etc. I have tried to edit ICS file but it's not making any sense to me as i dont's know the PCL. Could anyone familiar with a similar situation help?
Thanks in advance
Tayyab.

Hi, i would appreciate if someone could help me with the following issue:
I have designed a document using Adobe Output Designer and need to print it on Konica printer which uses above driver. Konica is not included in Adobe Presentment Target List so i am trying to use a Generic Postscript L2 - (PSLEVEL2) presentment target. I want to make few changes to this driver to match it with destination printer settings. e.g Output Order should be Face Up, Input and Output Tray should be Auto, Print position should be Left etc etc. I have tried to edit ICS file but it's not making any sense to me as i dont's know the PCL. Could anyone familiar with a similar situation help?
Thanks in advance
Tayyab.

Display issue with LiveCycle Designer ES4 for cropped PDF in WIN7

Hi,
I am having issue displaying the cropped PDF file in the LiveCycle Designer ES4. The PDF files are cropped 3 inches from bottom using Adobe Acrobat 8 Professional. It used to display properly when we have a WinXP machine but once we moved to a Win7 machine, it cannot display the top part of the PDF anymore. Can anyone help on how to fix the display issue? Thanks.
Kenny
Environment:
Adobe LiveCycle Designer ES4 V11.0.0.2013.0303.1.892433
Adobe Acrobat 8.0.0
Screenshots
Win 7, LiveCycle Designer does not display properly
Win XP, LiveCycle Designer used to display properly

Thanks vNohria.
I am having same issue with Adobe Acrobat 9. The Acrobat 9 cropped file is displaying properly under WinXP but have the same issue as above in Win7. This issue seems uncommon as I tried to look for similar issue and couldn't find any.
P.S. It's only the Design View in Win7 that has the issue, I can still see the file fine with Preview PDF in both enviornment.
Design View:
Preview PDF:

Issues with Query Caching in MII

Hi All,
I am facing a strange problem with Query caching in MII query. Have created one xacute query and set cache duration 30 sec. The associated BLS with the query retrieves data from SAP system. In the web page this value is populated by executing an iCommand. Followings are the steps I followed -
Query executed for first time, it retrives data from SAP correctly. Lets say value is val1
At 10th sec Value in SAP changed to val2 from val1.
Query excuted at 15th sec, it gives value as val1. Which is expected as it gives from cache.
Query is executed 1t 35th sec, it gives value as val2 retriving from SAP system. Which is correct.
Query executed at 40th sec, it gives value as val1 from cache. Which is not expected.
I have tried with java cache clear in browser and JCo cache of the server.
Same problem I have seen for tag query also..
MII Version - 12.0.6 Build(12)
Any thoughts on this.
Thanks,
Soumen

Soumen Mondal,
If you are facing this problem from the same client PC and in the same session, it's very strange.. but if there are two sessions running on the same PC this kind of issue may come..
Something about caching:
To decide whether to cache a query or not, consider the number of times you intend to run the query in a minute. For data changing in seconds, and queried in minutes, I would recommend not to cache query at all.
I may give a typical example for query caching in a query on material master cached for 24 hours, where we know that after creating material master, we are not creating a PO on the same day.
BR,
SB

SSO with Query Designer

Hi all,
I need to add a link to SAP Query Designer in Portal that will launch Query Designer using SSO.
We have SSO with R/3 and with BI already implemented (the user will click on the link and launch SAP GUI without having to type username/password), but we don't know how to do that for Query Designer.
Can anyone help us? Is there any documentation on the subject that we didn't find?
Thanks,
Daniel

Apparently there needs to be some kind of certificate to add.
Anyone know anything about this?

Issue with query output

hi there,
I have an issue with the display of hours 00:00:00 in the query output in BW.
The system assumes it as 0 or blank and therefore display it under unassigned hour.
I am using the reference of 0TIME for this hourly display.
When I checked the 0TIME i could not find the corresponding SID value for 00:00:00 hours.
Can anybody please advise what needs to be done?
Thanks in advance,
Kind regard,
Kate

Hi Kate,
I am experiencing the same problem as you: an InfoObject, created referencing 0TIME, represented in the BEX Query as "#" when the Value is "00:00:00".
How did you work it out?
The Formula Variable strategy is not applicable in this case because 0TIME is not a key figure !
Bye
Aldo

Question about calculation example with Query Designer

Hi guys,
I have to calculate within columns and rows and I am not familiar with the settings in Query Designer that could be done to achieve the results.
For example:
Payments----
Delay -
Weighted Delay
1000USD--10 days--
10000
2000USD--20 days--
40000
3000USD--xxx--
50000 (this is the sum row)
The column marked with the xxx is calculated with the sum of weighted delay divided by the sum of payments (50000 / 3000).
Has anybody an idea how the sum row can be calculated separately?
Thank you for suggestions!
Edited by: saplaz on Jul 13, 2010 8:47 AM
Edited by: saplaz on Jul 13, 2010 9:08 AM

Hi,
Assuming you have the Payments Infoobject in the rows and WD Infoobject in the columns; Delay as a formula object.
> Payments----
Delay -
Weighted Delay
> 1000USD--10 days--
10000
> 2000USD--20 days--
40000
> 3000USD--xxx--
50000 (this is the sum row)
> The column marked with the xxx is calculated with the sum of weighted delay divided by the sum of payments (50000 / 3000).
You may try this workaround of using
NODIM( SUMCT(WEIGH_DELAY) / SUMCT(PAYMENTS) )
on a formula variable. (In this case, the assumption is you have not static type-restricted the rows/cols) If you find any hinderances in the default approach, you may check this out as a formula & insert this at the cell editor level.
If not, use a simple formula variable; here define the replacement path as 0(N) for your Payments. (N being the # of digits)
Use a simple calculation:
SUMGT(WD)/FV
But you may not get an result o/p in the last row, as the values are not linked (sans relation with Payments). as it will return a X for the delay in the Result row.
Pls. let me know know if this works or some sample o/p if the initial assumption was wrong.
Thanks,
Arun Bala

Performance issue with Query

11g
Hi there experts,
I have an issue with performance with a simple SQL which I thought cannot be tuned but just wanted to check with the experts here. We are running a query to get a persons ID based on his logged in email address from a Parties table which is huge (Millions of records). The query takes about 30 seconds to return a value. Was wondering is there a way to optimize this
The query is
{code}
select par.party_id
from parties party, users users
where
lower(party.email_address) = lower(:USER_EMAIL)
and party.system_reference = to_char(users.person_id)
and users.active_flag ='Yes';
{code}
The emails are stored in upper and lower, hence the lower functions
IS creating a function based index the only way?
Thanks,
Ryan

Hi Everyone.
Thanks and apologies, first post on tuning as such. Here is the explain plan generated through SQL DEVELOPER. IT showed the output in XML
By the way, looks like the {code} tag does not work?
{code}
SELECT STATEMENT
84903
     HASH JOIN
84903
     Access Predicates
     PARTY.ORIG_SYSTEM_REFERENCE=TO_CHAR(PERSON_ID)
     TABLE ACCESS
     PER_USERS
STORAGE FULL
1059
     Access Predicates
     AND
     ACTIVE_FLAG='Y'
     OR
     OR
     BUSINESS_GROUP_ID=0
     BUSINESS_GROUP_ID=1
     BUSINESS_GROUP_ID=DECODE(SYS_CONTEXT('FND_VPD_CTX','FND_ENTERPRISE_ID'),NULL,BUSINESS_GROUP_ID,TO_NUMBER(SYS_CONTEXT('FND_VPD_CTX','FND_ENTERPRISE_ID')))
     Filter Predicates
     AND
     ACTIVE_FLAG='Y'
     OR
     OR
     BUSINESS_GROUP_ID=0
     BUSINESS_GROUP_ID=1
     BUSINESS_GROUP_ID=DECODE(SYS_CONTEXT('FND_VPD_CTX','FND_ENTERPRISE_ID'),NULL,BUSINESS_GROUP_ID,TO_NUMBER(SYS_CONTEXT('FND_VPD_CTX','FND_ENTERPRISE_ID')))
     TABLE ACCESS
     HZ_PARTIES
STORAGE FULL
83843
     Access Predicates
     LOWER(PARTY.EMAIL_ADDRESS)='[email protected]'
     Filter Predicates
     LOWER(PARTY.EMAIL_ADDRESS)='[email protected]'
{code}
Purvesh, around 50% are 'Yes'
Thanks!

Issue with Report Designer urgent please

Hi All,
I am having a requirement where i need to move char "customer " from Row to Columns, Is der any such option in Report Designer.
I try to delete the row in the header but i am not able to do it.
please let me know
Regards
Priya

Hi guys,,
there r two structure in the query design but i need to create one more as to achieve the requirement, I know that der is no possiblility but is der any alternate sol instead of structure.
Regards

Sling mapping issue with Query String

For a button component, URL behaves differently with query string. Please let me know the sling mapping example for query string.
Button component behavior across env:-
Working Scenario:-
- In Author edit mode, URL pointing to "/content/<websitelink>"
- In Author preview mode shows URL "<host>:<port>/content/<websitelink>.html"
- In Publisher mode shows URL, "<host>:<port>/<websitelink>", we do not want "/content" before website link so it is fine.
Failure Scenario with query string:-
- In Author edit mode URL pointing to "/content/<websitelink>?username=han"
- In Author preview mode with URL "<host>:<port>/content/<websitelink>?username=han"
- In Publisher mode, <host>:<port>/content/<websitelink>?username=han - Here we see the content, which is not acceptable in our scenario.
Please let me know the mapping changes when we have a URL with query string.

1) I assume you configure as per the rules mentioned in http://sling.apache.org/site/mappings-for-resource-resolution.html --> 'Mapping Entry Specification' under /etc/map. Based on the configuration in /etc/map and the website that we publish, it translates and shows all the applicable combination in the Felix console http://<host>:<port>/system/console/jcrresolver.
2) How does Adobe CQ 5.4 resolve the right mapping, if we have multiple map folder like below in /etc directory with the same website with different rules.
etc/map --> http --> <website> with property sling:match, sling:internalRedirect
etc/map.publish --> http --> <website> with property sling:match, sling:internalRedirect
etc/map.publish-stag --> http --> <website> with property sling:match, sling:internalRedirect
Kindly clarify.

Problem with Query designing

Hi All,
I had created a query and started designing a crystal report.
But after designing the report, i came to know that some infoobjects are missing in the query.
So i went to query designer and added the corresponding infoobjects inorder, they could reflect while designing my crystal report.
But when i have reopened the report the field explorer is not showing the infoobjects which i have added newly.
In crystal reports what is the way to obtain those objects which are newly added to the query.
Even i have refreshed the field explorer many times but still it is not showing the updated objects.
But if i go creating a new report on the same query, there it is showing the added objects as well.
Only for the new report i could able to see the newly added objects in field explorer but not for the old report.
Please let me know the solution for this problem ASAP.
Best Regards
Jiten

Jiten,
i think if you click Database--->Verify Database and also try Set datasource location -
>Update.
this should do the trick.
Regards
Jehanzeb

Extract the Month from the day with Query designer ...

Hi everybody,
Is there exist a method in Query designer to extract the CalMonth (Date Month) from the CalDay ?
Thanks!
Rodolphe.

take reference from this step by step doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a

Issue with Query Designer

Similar Messages

Maybe you are looking for