Issue With R/3 Extractor 2LIS_13_VDITM and 2LIS_11_VAITM during Delta Updat

Hi all,
We are using 2LIS_13_VDITM and 2LIS_11_VAITM Datasources to upload sales overview cube directly as well as a custome ODS seperately using Direct Delta method.
Now first time upload was perfect(Initialization) but if any changes are made to the existing data or if any new entries are entered in the source system, R/3 extractor (2LIS_13_VDITM and 2LIS_11_VAITM) is not pulling those records.
Once we tried deleting SETUP table and reloaded it, extractor was able to pull the records but again the issue crops up for any new entries or changes made in source system.
This is stopping us from completing the project. So any suggestions the would help us solving the issue is most welcome.
Regards,
Surendhar.

Hi,
If you have selected the 'Queue delta' Update method for applications 11 and 13,then make sure that the "update" job is scheduled to move the data from LBWQ to RSA7. Once the data available in RSA7, you can execute the infopackage with delta load.
If you have selected the 'Direct delta' Update method for applications 11 and 13,then there is no need of "update" job to move the data from LBWQ to RSA7. Once the data available in RSA7, you can execute the infopackage with delta load.
With rgds,
Anil Kumar Sharma .P

Similar Messages

  • Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

    Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

    Does the device get any signal? 
    Sounds like the device may have had a hardware failure.  If it is out of warranty, the only option is the Out of Warranty replacement.
    AppleCare is only an option if it is still under the original warranty.

  • OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B

    I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1.  
    Everything works perfectly previously on 10.8.4 and 10.8.5.  I did not test on 10.9.0 as I went straight to 10.9.1.  Anyone else having this problem?  Any thoughts on resolution?

    OK so perserverance seems to have helped here - i used the cmd R function on start up to get to the page where i can re install OS X Lion - Safari now working.
    However i have Office 2011 for MAC and now Excel wont start so i will post on another thread for help with this
    Hope this helps if anyone has a similar issue

  • Issue with Acrobat 10.1.2 and Windows 7 64-bit Preview Handler

    Hi. I work in an enterprise environment that is currently migrating to  64-bit Windows 7. The only version of Acrobat we have approved for Windows 7 is 10.1.2. We're seeing an issue with this version that causes the preview handler to not work. The preview panel in Explorer is just white and will eventually give the error "Preview handler surrogate host has stopped working."  I've tried to fix listed on http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html but that registry key is already correct. Our current work around for these users to just install Reader X1 and make it the default PDF handler, but I would like to find a better solution. Is there a known issue with Acrobat 10.1.2 and 64-bit operating systems? Or is there a way to change just the default preview handler?

    Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
    Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
    I'll ping some folks about the error you are getting. . .
    hth,
    Ben

  • Are there any issues with using OS X Mavericks and Premiere CC?

    Are there any issues with using OS X Mavericks and Premiere CC?

    Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
    Peter Garaway
    Adobe
    Premiere Pro

  • Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows

    Here's some information on an issue that we've identified with Matrox products and Encore CS5.1:
    "Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows"

    Still flickering on Encore even when rendered in MPEG-2 DVD in Pemiere Pro CS5.5. Looks perfect in Premiere Pro.
    Any other ideas?
    EDIT: Was looking for Google for people with similar problems to me and I came across this http://forums.adobe.com/message/3959757?tstart=0
    I am currently re-rendering the video in PAL DV Widescreen MPEG-2 DVD and using maximum render quality.

  • Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks?  Don't want to download Yosemite.  Not hearing good things about it.

    Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks?  Don't want to download Yosemite.  Not hearing good things about it.  I'm on Mavericks 10.9.5.

    one obstacle, quickly removed. thank you.
    nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
    i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

  • I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

    I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

    adamboettiger wrote:
    Sophos and MacKeeper
    There are many reported problems with both these programs.
    Run through this list of fixes in order, will tune you right up.
    They are in order for a reason.
    ..Step by Step to fix your Mac

  • I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

    I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
    I mostly enter the original items on my laptop
    There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

    This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

  • Issue with Visibility Settings for Backgrounds and Layers

    I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
    When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
    Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
    I was wondering if anyone else has run into this and has a solution, or has any recommendations.
    Thanks in advance.

    Hi setrev2012,
    How are you adding the backgroud?
    The only way I can think to accomplish this is via a watermark.
    The basics...
    Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
    Select a jpg or PDF of your background and adjust scaling options as desired.
    Then click the Appearance Options.. and uncheck the Show When Printing option.
    In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
    If you want a solid color background, just create a flat image of the background color for use as the watermark.
    If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
    Regards,
    Rave

  • HT4972 Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

    Has anyone had issues with failure of the music player to launch after updating to OS5? My Gen 3 will no longer play music!

    I think a few have.
    Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????

    Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????  AT&T my DSL carrier suggests I get a new router.  Apparently the one I have is really old and doesn't support my Macbook Pro.  Does this sound right?

    If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
    Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
    One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
    One for entering into devices, computers etc for Internet Access Only.
    You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
    Also if you give out the password to another, they can't hack the network with the guest access password.
    Computers remember the internet password, so anyone with access to your machines or network will have the password.
    Since you have another Admin only password, they can't hack in. got it?
    You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
    Good luck.

  • I have a ipad 3 with ios 5.1.1 and it will not update to ios 7. I keep getting a software failed message and the download takes 13 hours and stops half way through. Any help?

    I have an ipad 3rd gen with ios 5.1.1 and I can not update it to ios 7. It will take 13hours and when I try it stalls out halfway through and says software update failed. I have tried everything. Any help?

    it actually needs more space than that.  The file size is your 65 mb is probably the ota incremental file size.  The full package is 700 mg, and the system needs 3 gig of free space to unpack and install.
    There is a fairly good discussion here
    https://discussions.apple.com/message/23680750#23680750

  • I have an iPhone with iOS 7.1.1 and am trying to update to 7.1.2, but get an error message "iTunes could not back up the iPhone becaus the backup was corrupt or not compatible with the iPhone"

    I have an iPhone with iOS 7.1.1 and am trying to update to 7.1.2, but get an error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone"

    Assuming you are using the current version of iTunes (11,2,2), open iTunes, click "Preferences" under the leftmost entry on iTunes' menu, then choose "Devices".
    Find the iPhone's backup there, highlight it, and choose "Delete Backup".

  • When i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

    when i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

    Hello,
    Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

Maybe you are looking for