Issue with Recording process

Hi Experts,
I was trying to create an LSMW object for Customer Master(XD01), So Intiallly I started recording the process of input through
SHDBRecoding process. The problem is that I cannot view some of the fields for input example in Address Details I have a field called as C/O and STREET2, which are not getting displayed while recording.
While creating the Customers normally without recording process, I have made these two fields mandatory for input. So, the fields are getting diplayed when I manually create the customers.
But, when I start the recording process, I cannot view both fields (C/O and STREET2) for input. Are there any settings to be done in recording process(SHDB) to make the fields visible and mandatory for input.
Your inputs would be certainly appreciated.
Thanks in Advance,
KishoreJ.

Hi Balu,
Thanks for the input, As I was mentioning in my question while I am manually creating (NOT THROUGH RECORDING PROCESS),
I can view the fields, since I made them mandatory and more over you would have the option MORE FIELDS, only when you manully create customers with out recording process.
If there is an option which can show "MORE FIELDS",in recording process Please let me know.
Regards,
KishoreJ.

Similar Messages

  • Issue with Recording Process (SHDB)

    Hi Experts,
    I was trying to create an LSMW object for Customer Master(XD01), So Intiallly I started recording the process of input through
    SHDBRecoding process. The problem is that I cannot view some of the fields for input example in Address Details I have a field called as C/O and STREET2, which are not getting displayed while recording.
    While creating the Customers normally without recording process, I have made these two fields mandatory for input. So, the fields are getting diplayed when I manually create the customers.
    But, when I start the recording process, I cannot view both fields (C/O and STREET2) for input. Are there any settings to be done in recording process(SHDB) to make the fields visible and mandatory for input.
    Your inputs would be certainly appreciated.
    Thanks in Advance,
    KishoreJ.

    Hi Premal Mistry,
    I beleive I was seeking help for Customer Master, But anyways if we consider the reply given by you for vendor master.
    If I used the Function module 'ISIDE_SM_VENDOR_DETAILS_UPDATE', How Can I create an SHDB Recoding, in order to use it in LSMW, by Direct input or Recording method.
    As I believe this is an Remote Enabled Function Module, should I create a raffer and use it as a BAPI.
    As I need to upload " CUSTOMER MASTER UPLOAD" through LSMW.
    Thank You,
    KishoreJ.

  • Issues with FMSEdge process while security scan in progress

    We have recently deployed Flash Media Streaming server 3.5.2 and Flash Media Encoder on a Windows 2003 machine. We are able to capture live streaming and the regular streaming of recorded video’s without any issues.
    We are encountering an issue with one of the FMS’s process’s whenever a security scan is performed on the machine, during the security scan process one of the process’s for FMS called FMSEdge.exe creeps all the way up to 100% CPU utilization. This is causing problems with security scan not completing.
    Have any of you experienced this kind of problem? Could you please let us know if there is solution to this issue.

    Hi [email protected],
    Please refer the solution in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
    If you continue to face difficulties you can try initiating a direct download by following the steps listed at http://forums.adobe.com/thread/981369

  • Statistics technical content activation issue with MD process chain in BI7

    Hi,
    Let me give you history of the issue first.
    I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
    Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
    Load data- Process Variant Attribute and
    Load data- Process Variant Text.
    I did the same and it got activated after removing them.
    Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
    Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
    Relying on you for solution.
    Thanks
    Pavan

    Thank You Neethika,
    I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
    Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
    Thanks
    Pavan

  • Issue with recorder

    hi all,
    i am encountering a strange issue.
    i m trying to post transaction FBRA (Reset cleared items). when i run the transaction normally, supplying the doc. no. , comp code and fiscal year...i click on save and a popup message comes up which asks to either only reset the documents or to reverse them as well...no issues so far...
    the issue however comes when i try and record this transaction....there is no pop up at all...?? why so??
    although i went in the code and found out the screen no. and okcode value to code my bdc but i would like to know why such sort of a thing would occur....as per my knowledge...this cannot be a limitation with recorder...or is it?
    any knowledge sharing will be appreciated...

    Is this popup to get some kind of Profile?
    I'm thinking that this is your problem,  I did a search in that program for SY-BINPT , this is a system value which is set to "X" when in Batch Input or BDC mode.  I think that this is why you are not getting your popup.
      IF NOT ls_message IS INITIAL
        <b>AND SY-BINPT = SPACE</b>.
        CALL FUNCTION 'BAL_DSP_PROFILE_POPUP_GET'
             IMPORTING
                  e_s_display_profile = ls_display_profile.
        ls_display_profile-use_grid   = 'X'.
        CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
          EXPORTING
            i_s_display_profile          = ls_display_profile
          EXCEPTIONS
            profile_inconsistent         = 1
            internal_error               = 2
            no_data_available            = 3
            no_authority                 = 4
            OTHERS                       = 5
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        CALL FUNCTION 'BAL_LOG_REFRESH'
          EXPORTING
              i_log_handle = ls_handle.
      ENDIF.
    Regards,
    Rich Heilman

  • Issues with parallel processing in Logical Database PCH and PNP

    Has anyone encountered issues when executing programs in parallel  that utilizes the logical database PCH or PNP?
    Our scenario is the following:
    We having have 55 concurrent jobs that execute a program that use the logical database PCH at a given time.  We load the the PCHINDEX table with the code below.
          wa_pchindex-plvar = '01'.
          wa_pchindex-otype = 'S'.
          wa_pchindex-objid_low = index_objid.
          APPEND wa_pchindex TO pchindex.
    We have seen instances where when the program is executed in parallel, with each process having its own range of positions id's, that some positions are dropped or some are added that is outside the range of the given process.
    For example:
    process 1 has a range of positions ID's 1-10
    process 2 has a range of positions ID's 11-20
    process 3 has a range of positions ID's 21-30
    Process 3 drops position 25 and adds position 46.
    Has anyone faced a similar issue?
    Thanks for your help.
    Best Regards,
    Duke

    Hi,
    first of all, you should read [Using Parallel Execution|http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/usingpe.htm#DWHSG024] in documentation for your version - almost all of these topics are covered there.
    1. According to my server specification how much DOP i can specify.It depends not only on number of CPU. More important factors are settings of PARALLEL_MAX_SERVERS and PARALLEL_ADAPTIVE_MULTI_USER.
    2. Which option for Setting Parallel is good - Using the 'alter table A parallel 4' or passing the parallel hints in the sql statementsIt depends on your application. When setting PARALLEL on a table, all SQL dealing with that table would be considered for parallel execution. So if it is normal for your app to use parallel access to that table, it's OK. If you want to use PX on a limited set of SQL, then hints or session settings are more appropriate.
    3. We have a batch processing jobs which are loading data into the tables from flat files (24*7) using sql loader. is it possible to parallel this operation and any negative effect if enabled parallel.Yes, refer to documentation.
    4. Query or DML - which one will be perform best with parallel option.Both may take advantages of using PX (with some restrictions to Parallel DML) and both may run slower than non-PX versions.
    5. What are the negative issue if parallel option is enabled.1) Object checkpoint happens before starting parallel FTS (true for >=10gR2, before that version tablespace checkpoint was used)
    2) More CPU and memory resources are used with PX - it may be both benefit and an issue, especially with concurrent PX.
    6. what are the things to be taken care while enabling the parallel option.Read the documentation - it contains almost all you need to know. Since you are using RAC, you sould not forget about method of PX slaves load balancing between nodes. If you are on 10g, refer to INSTANSE_GROUPS/PARALLEL_INSTANCE_GROUPS parameters, if you are using 11g then properly configure services.

  • Status issues with sales process

    Hi Friends,
    I have an issue with thrid party sales order processing
    Step#1
    My client runs the sales order for
    Material Qty
    p-100 10
    p-101 10
    p-102 10
    step-2
    Purchase requisition created and from vendor delivery happened
    Step-3
    My user created billing with reference of sales order for below material
    Material quantity
    p-100 20
    p-101 10
    p-102 20
    step-4
    user found mistake and he cancelled the invoice and created new billing document
    for
    material quantity
    p-100 10
    p-102 10
    again he found mistake and cancelled this billing document and create one more billing document with reference of sales order
    material quantity
    p-100 10
    p-101 10
    p-102 10
    now the issue is for p-100 and p-101 it showing being process and p-101 it showing status as completed
    please suggest m

    Just checking to see if anyone has re-produced any of these issues...
    Thanks!
    Jason Walters

  • Xi-Fi Issue with recording

    Im am recording in nuendo and Im using the creative asio driver. When I record a track on track one all is good. However, when I go to track two and hit record, it wants to record the play back on track one. I cannot play a track and record on a separate track without the first track being recorded also. How do I multi track record with the creative XI -FI ($199.00) setup. I also have an audigy zs sound card that I have no issues with. However my inputs seem to have stopped working after I swapped out motherboards. So I went out and purchased this creative XI-FI setup.
    PLEASE HELP!

    kbone wrote:
    Im am recording in nuendo and Im using the creative asio driver. When I record a track on track one all is good. However, when I go to track two and hit record, it wants to record the play back on track one. I cannot play a track and record on a separate track without the first track being recorded also. How do I multi track record with the creative XI -FI ($199.00) setup. I also have an audigy zs sound card that I have no issues with. However my inputs seem to have stopped working after I swapped out motherboards. So I went out and purchased this creative XI-FI setup.
    PLEASE HELP!
    WHAT? Is there this "What U Hear" option on X-Fi too???
    Just change the recording source to the one you're recording from (I can't say how because I do not have the X-Fi card). This can be done on Audio Creation Mode settings panel (I suppose). On Audigy .rec source shall be set to AnalogMix(...) or Microphone normally.
    jutapa

  • Issue with BDC processing of F-65 after upgrade to ECC 6.0

    Dear ABAP gurus,
                  We have upgraded our SAP system from version 4.7 to ECC 6.0.            
    We are facing issue when processing BDC sessions for transaction code F-65.
    The screen which appears for Assignment to a profitability segment creates issue when processing BDC for F-65.
    The screen name is SAPLKEAK and the corresponding screen number is 0300.
    This screen displays the characteristic and its corrsponding values. The characteristics and its values are pulled in from FICO Config at runtime when you execute F-65 and all relevant Tcodes of business transaction RFBU.
    We checked for the characteristics maintained for Characteristic group via std. transaction code KEPA. It shows 4 characteristics listed of which 2 are optional and 2 are mandatory. The same settings are available in older version as well as in ECC 6.0. Also validated the assignment of characteristic group to the actual data i.e to the business transaction RFBU via Tcode KE4G.
    When we do recording in SHDB in both the systems, the older version shows it correctly displaying 4 fields(2 optional and 2 mandatory) in the Assignment to a profitability segment screen whereas the new system displays some 12 additional fields. Also none of the fields appear mandatory.
    The issue is we are still not able to identify whether this is a technical issue or functional issue.
    Searched for relevant OSS notes but couldn't find any.
    Anyone of you who have faced this issue, please respond immediately.
    We have this issue to be resolved on high priority.
    Help will be highly appreciated.
    Regards,
    Kavita

    This issue was also posted with an OSS-message to SAP, and the solution was to run this  program SD_PLANVALUE_UPDATE
    Berit

  • Issue with page processing - confirmation message & show /hide a button..

    Hello,
    I am working on a to do list application.
    I have events and for each event, I show list of tasks (grouped in reports based on the calculated task's status).
    In one region I have a drop down list of events and a Select Event button.
    For each task, I had to create a CLOSE option (initially I used a link, but the requester wanted a confirmation before closing the task).
    Now I have a checkbox for each task (generated dynamically with apex_item.checkbox(1,task_id)).
    Closing a task in my application means to set the end_date to sysdate.
    I followed the instructions from
    http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/check_box.htm#CEGEFFBD. I've created also a button and a process and updated the sql from "delete" to "update".
    The process is set: OnSubmit - After Computations and Validations; Run Process Once per page visit (default).
    The issue number 1 is that I see the confirmation message (that tasks have been closed) every time I reload the page (the same when I click Select_event button).. not only after I press on that Close_task button..
    For issue number 2, I have to mention that I've added a condition to show / hide the Close_task button, only if I have at least 1 task in the report.
    The issue number 2 is that I see the button only if I click 2 times on the Select_Event button.. The same is for hide.
    I feel like I am missing something very important about how to synchronize different events(buttons clicks), processes..
    help..?
    Thank you!
    Anca

    This forum is magic..
    As soon as write here, I find the answer!
    Issue 1: I fixed it by specifying this: When Button Pressed (Process After Submit When this Button is Pressed) and my button. I miseed this 1st time.
    Issue 2: I moved the button after the report.. and now it's working just fine!
    I did this about it for some time before asking the question here.. but I just had to write here and got the right answer ;)
    Have a nice day!
    Anca

  • Inbound IDoc w/message ORDERS - issues with error processing

    We are using inbound IDoc ORDERS05 with message type ORDERS to create the sales orders in SAP. In WE20 we have the following settings:
    - partner type LS (= Sales Org VKORG)
    - process code ORDE
    - trigger by background program
    - post-processing agent of type US (user) with a user ID.
    We create IDocs through an ABAP program and use RBDAPP01 to post the IDocs. When there is an application error in the IDoc posting we expect the designated user to receive a workflow item in the SAP Inbox, but for some reason this is not happening.
    I did some research and went through all the possible settings for workflow, task, etc. and everything seems to be set up correctly. When debugging RBDAPP01 I have noticed that it calls FM APPLICATION_IDOC_POST_IMMEDIAT, which, in turn, calls IDOC_START_INBOUND. If IDOC_START_INBOUND returns SY-SUBRC = 1 then the workflow item is sent correctly to the designated user, exactly as we want. But for some reason it returns 0 (I changed it to 1 in the debugger).
    It seems that IDOC_START_INBOUND reads TEDE2 records (TEVE2-EVCODE = ORDE) and sy-subrc = 1 is only possible when EDIVR2 is 1,2,3 or 4. In our case TEDE2-EDIVR2 = 6. It seems that TEDE2 is maintained in the transaction WE42. However, I tried to change the settings there but it affects the IDoc processing in whole (IDoc gets some odd status and doesn't get processed as before). I've also tried to use process code ORDE_BY_WORKFLOW in WE20 with the same "success".
    What do we need to do to get a workflow item for the errors that happen in the application layer when IDoc is posted? Is it even possible with this message type?
    Any ideas would be appreciated.

    Hi,
    Can you please share how do you overcome the problem, so that it can be helpful for others.

  • Issue with recorded sound- sounds like the recordings were made underwater.

    Hi, all.
    I'm running Adobe Audition CS5.5 on a Toshiba Satellite Pro C660-1UZ with Windows 7 Home Premium installed. My machine meets all of the system requirements, as far as I can tell, and yet recordings made in Adobe Audition sound like they were made underwater.
    For reference:
    http://www.soundclick.com/player/single_player.cfm?q=hi&songID=11138745
    I'm not using an interface at present, but would be willing if there were a cheap model available.
    Thanks for any help,
    Casey

    I have a slightly older Toshiba Satellite notebook that I use for recording and mixing and I can tell you that the built in audio interface (i.e. the mni jack mic input) is worse than bad.  I can get away with it for Skype phone calls but that's about it--and even for Skype I often plug in my interface.
    The other thing going on with the sample you posted is that the levels are very low so the need to crank things up to hear anything just accentuates the noise.
    Basically, Audition just takes the signal provided by your mic and interface and doesn't affect the sound in any way until you deliberately add processing.  You really do need to invest in an interface--pretty well any two track USB devices will be a vast improvement on the Toshiba mic input. 

  • Issues with downloading process...

    I recently tried to download the trail version for Photoshop Elements. While trying to extract the files I kept gettting error code 101, which means that I don't have sufficiant space on the hard drive in question. So I went to the disk drive and looked it up, and found that I have over 300gb extra space on that drive... now I would like to hope that photoshop doesn't need THAT much space just to download. I've had this issue already with downloading that actual product from Wacom for the Tablet I had bought from them last week, although that error code revolved around the file being corrupted.
    I know that it has nothing to do with my computer as I have tried to download it on two different laptops and even my main desktop for both the trail process and the actual product itself. I don't know what seems to be the issue and I really would like to find the issue soon. I feel like I'm just bad luck brian when it comes to anything photoshop at this point....

    Hi [email protected],
    Please refer the solution in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
    If you continue to face difficulties you can try initiating a direct download by following the steps listed at http://forums.adobe.com/thread/981369

  • Wired Headset issue with recording

    Hi,<br><br>I've a blackberry 9300 running on os5. When I try to speak during a call or record with the wired headset, the audio is not heard by the other person n doesn't seems to get recorded.<br><br>With a high volume of audio it gets recorded and it is very feeble to listen with full volume. The speaker of headset works well when I listen to mp3. Also the headset works well with other devices where it can record the sound with minimal effort.. I donno what's wrong with it. Kindly suggest any solution.<br><br>Thanks &amp; Regards,<br>Bhavan

    Please try to isolate the issue by using another headset. If the other headset works fine, that means the one that you're using may be faulty.
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • Issue with the process chain?

    Hi All,
    I have a process chain triggerred by an event.I had this transported into Q box.After moving it to Q i did click on acativate and schedule icon.When i triggered the event in Sm64.The process chain triggerred successfully.The next day when i tried to trigger the event ,the process did nothing,its only after i actiavted the process chain and triggrred the event the process.
    I know the process chain should be good after ictivated once when  moved into a new system.Can anybody tell me how to resolve my issue of activating the PC whenever i wnat to trigger it.What i am i missing here?
    Please advice,urgent

    I think Geo answered what you want and what I wanted to tell.
    Thanks Geo
    Ther are two  basic things
    --> In order that your PC responds to your "Event & Parameter", maintain the same and PC <b>should be in scheduled status</b>
    --> the periodic check box <b>schedules again</b> once the current run completes. i.e makes ready the PC for the next run whenever the next "event and parameter" gets triggered by any means ( you no need to activate and schedule again)
    Sorry If my answer confused you..Hope everything is clear now...!
    VJ

Maybe you are looking for