Issue with Replacement path variable

Hi all,
I had created a formula variable with replacement path for this i had created a variable with replacement path and i had used it in the formula but i am unable to get the value of the replaced objects can any one thru some light on this.
Regards

yes the ref char having value. another thing do i need to include the char in the row r columns which has been replaced in the formula variable.
regards

Similar Messages

Using Characteristic value with Replacement path variable

Hi All,
Could you please let me know if it is possible to use charecteristic value instead of key figure with replacement path variable. My requirement is to use factory calendar id as the replacement variable on plant characteristic, now when I choose replcaement variable with Attribute value, the dropdown menu only gives the list of key figures assigned as an attributes to Plant.
Now I am looking for a solution to use factory calendar id as the attribute.
Thanks for your help in advance.
Regards
SS

Hi sachin
U can use it
Look at these links
Re: Customer exit & Replacement path........?
Variable with Replacement Path
Re: Replacement Path for Charastrictics Variable
http://help.sap.com/saphelp_nw04/helpdata/en/03/6ba03cc24efd1de10000000a114084/frameset.htm
Regards
KR

Nav Attribute Calculation in Query with replacement path variable

Gurus,
Can we use attribute of a charecteristic in calculation based on the sap how to below.
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc&overridelayout=true
Basically above document uses attribute which is KF key figure ,but i want to use a attribute which is if type - NUMC.
So the question is can i directly use the same steps mentioned in the link or need to modify because the type is NUMC.
Thanks in advance

Hi Andrew,
You can not use the attribute with NUMC in calculation. In order to do the calculatio based on attribute you have to create the attribute as Key Figure type. I mean to say as described in the document.
NUMC is data type Char string with numbers and you can not do calculation based on Char string.
Regards,
Kams

Replacement Path Variable with Another Variable

Hi,
I am currently trying to create a report that would need me to have the same values for different characteristics (e.g. clearing date, posting date, net due date). I have seen that there is a way in the replacement path variable that would replace its value with another variable that is ready for input. I also looked into SAP help but I can't seem to figure out on how to do it specifically. Does anyone know a step-by-step process on how to do this? How does this work?
Thank you in advance!

take an e.g.
u have characteristic say ch1
u want to restrict it with replacement path variable
first of all create a variable var1
click what it is based upon for e.g. 0calday, 0material etc.
make it user entry variable
select single or multiple entry
make it mandatory
save it and hit okey
click on ch1
right click and say restrict
in new window create a new variable
give its name and technical name
processing path is replacement path
go to next tab of replacement path
select several ooptions
replace variable with another variable
select a variable called var1
change the offset length and offset start with different parameters.
hit okey
this way u have restricted ch1 with replacement path variable var1
now when u run report u have to enter value of var1
which will then further feeded to ch1
this way u can create replacement path variables at lots of instances and then u can always feed the value from var1 at different time
make sure as this ur requirement is date
try to use 0calday as reference infoobject all the times....

Replacement path variable with offsets

Hi experts,
I have the requirement to report receivables (open items) historically by fiscal year / period.
More precisely, each period should show the open items that are open at the end of the period.
Example:
001.2010 (shows open items from 31.01.2010)
002.2010 (shows open items from 28.02.2010)
...etc.
The idea is that the user enters a fiscal year/period using a manual entry variable.
The open items should be calculated as follows:
KF: Amount
Posting Date <= Variable
Clearing > Variable or unassigned
Variable is a replacement variable that is replaced by attribute "Date To" from the user entry Variable (Fiscal year period)
E.g. if the user enters 008.2010, then this value is automatically replaced by 31.08.2010.
Generally this works.
However, to view the values for the last 12 months, a structure is needed consisting of 12 elements with offsets in order to show the 12 months prior to the selected period (e.g. 001.2010 - 002.2010 - 003.2010 ....etc.)
The problem is that the replacement only considers the user's variable entry and ignors the offsets.
Example:
User enters 008.2010.
In the column strucure I show 3 months 006.2010, 007.2010, 008.2010.
Then all columns would show items open on 008.2010 - the offsets are ignored.
Any idea, why this happens and how it can be resolved?
This problem has given me a headache for days.
Your help is much appreciated.
Thanks and regards,
Alex
The user should be able to enter a fiscal year / period and

take an e.g.
u have characteristic say ch1
u want to restrict it with replacement path variable
first of all create a variable var1
click what it is based upon for e.g. 0calday, 0material etc.
make it user entry variable
select single or multiple entry
make it mandatory
save it and hit okey
click on ch1
right click and say restrict
in new window create a new variable
give its name and technical name
processing path is replacement path
go to next tab of replacement path
select several ooptions
replace variable with another variable
select a variable called var1
change the offset length and offset start with different parameters.
hit okey
this way u have restricted ch1 with replacement path variable var1
now when u run report u have to enter value of var1
which will then further feeded to ch1
this way u can create replacement path variables at lots of instances and then u can always feed the value from var1 at different time
make sure as this ur requirement is date
try to use 0calday as reference infoobject all the times....

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

Issue with the Replacement Path Variable.

Hi,
I have an issue in using the Replacement Path Variable.
Issue: I have Sales information in the Sales Cube and AR information in the Accounts Receivable cube. Now we have a requirement to show the open AR documents with Sales information in it.
Apparently the system generates same number for both AR and Billing document.
So I thought of using the Replacement path variable in the Sales Query on Billing Document, so that it runs the AR query to get the list of open AR documents into the Sales query. But the system is complaining:
"System error in program CL_RSR_OLAP and form IF_RSR_OLAP~MODIFY_VQUERY_SETTINGS-01- (see long text)".
I searched OSS note on this and found the note: 1432062. Implemented, but now it complains:
"Abort Variable XXX cannot be replaced in this query".
I am trying to return the result from Accounting Document to the Billing Document. I know this is an issue, but after implementing the Note, i thought it would be fixed. But no luck.
Did anyone come across this situation. If you have any solution for this, pls let me know.
Thanks.

Hello;
Why don't you try to add the billing document in your financial cube;
mapping it with the a ccount document number?
This should make the replacement path work fine.

Issue - Formula Variable with Replacement Path

Hi,
Is it mandatory to include the base characteristics in the rows on which the formula variable(replacement path) is based on. As long as the base char is in the rows the variable works fine. The moment I take that off, the variable doesn't produce any result. I know the char can be put in the rows and can be hidden, but then in that case I don't get the desired aggregation level.
Has anybody come across this probelm and managed to sort this out? Kindly suggest any solution.
Thanks,
Anurag.

Hi,
a formula variable with replacement path only works if the replacement object is in the query in either the rows or colums. The data can never be aggregated on a higher level then the infoObject in the replacement path. If you want a higher aggregation you can add a new key figure as an attribute to your infoObject and fill it with the value you want in the loading process. You can use that key figure in your queries every way you want.
Kind regards,
Alex

Text Variable With Replacement Path : supported in Webi 4.0 or Not.??

Hello to All WebI Gurus,
We are on BO 4.0
We are building WebI report on top of Bex query using the BICS connection from IDT.
Our BW query is having some Text Variable with processing type "Replacement Path".
Also its having fiscal year period in filter with user input variable.
the text variables references Fiscal year period and are used in Key figure description,
hence whatever value the input variable will capture the description of Key figure changes accordingly/dynamically.
But when I try to use it in BO it throws me an error msg saying :
Unknown error occured in SL Services
I am Aware that text variable in this fashion were not supported in BO XI3.1
Used of Sap text variable with replacement path in Bo designer
So are Text variable Supported in BO 4.0 in this fashion.
Any response will be highly appreciable.
Thanks & Regards
Neeraj

Hi,
Here's a great SDN article, which includes several slides covering u201CWhich BEx features are supported using BICS connectivityu201D : http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d056e1bc-2794-2e10-959e-8779c5623cc5
Pages 8 -> 12 cover these topics.
If your design choices are compliant (supported) then i'd avise opening a support case if this issue persist after checking again on Patch2.11 (release recently)
Regards,
H

BEx Analyzer: Formula Variable with Replacement path change Month with Day

Hi experts I'm facing this issue in BEx Analyzer.
I need to have some dates in format DD/MM/YYYY in Index Structure, in order to do this I've created a formula variable with replacement path referenced to 0CALDAY characteristic.
The formula works but it behaves in a strange way:
if the day is higher than 12 the displaied result is correct (DD/MM/YYYY)
if the day is lower or equal 12 the displaied result is wrong (MM/DD/YYYY)
I'm on BW 7.01 SP6 and BEx Analyzer 7.10 SP12, excel 2007.
anybody has faced this issue before?
any help will be appreciated
Daniele Cortopassi

Hi Daniele,
This seems pretty strange. Pls. redo validation with the dump data, as being a flat struture BEx does not apply any logic changes. May be it might have been MM/DD/YYYY format as in workbooks. Else you may change the property of 0calday display as "Text". Business Explorer > Display > KeyMaster Data/Texts > Texts (Plese check this option). If you are using some text table you may maintain the same using BI0/TCALDAY (Similar to BI0/TCALMONTH2). Guess it should be an excel based issue; if not you may try the same in WAD/Report designer to verify the nature of the issue. If you don't face these inconsistencies in WAD/RD then you may change excel formatting options. Lastly, please let us know if the infoobject has some predefined settings in RSA1 > Infoobject > (BEx) Properites.
Thanks,
Arun Bala

Error while creating a Characteristic Variable with Replacement Path

Hi all,
    I am trying to create the Characteristic Variable ZVLOWDT (Low Date') with Replacement Path on characteristic ZSTARTDT (Start Date) and it gives the error 'Source to replace 'Low Date' is not defined.
   I have created a User Entry Variable VAR_DATE (Start Date) with interval like '01/01/2009 - 01/15/2009' and Customer Exit variable ZVCPDAY (does some calculation based on the input of VAR_DATE) on the same ZSTARTDT characteristic. I want to get the 01/01/2009 (lower range date of the selection) into this Characteristic Variable ZVLOWDT. We are in BI 7.0 and the following are it's properties:
General Tab:
Description: Low Date
Technical Name: ZVLOWDT
Type of Variable: Characteristic Value
Processing by: Replacement Path
Reference Characteristic: ZSTARTDT Start Date
Details Tab:
Variable Represents : Single value
Variable is: Mandatory
Variable is Ready for Input : unchecked
Replacement Path Tab: Replacement Rule
Replace Variable with : Variable
Variable : VAR_DATE
Replace with : KEY
Why I am getting this error, PLEASE ?
Thanks,
Venkat.

Hi Khaja,
   We could derive a Variable value from another Variable with out Customer Exit. There is a white paper.
First have the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next create the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we could get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path, PLEASE ?
Thanks,
Venkat.

Variable with Replacement Path

Hi, I have two queries. The results of the first one should be the input for the second one. E.g. the first query shows a list of personnel numbers and additional information. These personnel numbers shall be overtaken by the second query. The personnel numbers belong to "Dimensions" in the Query Designer. I alread tried to create a variable with replacement path to the dimension personnel number. I implementet this variable in both the first and the second query (under: "rows"). It`s no "Formular variable" and no "Calculated Key Figure" but a "Characteristic Value Variable" of a Dimension. The problem is now that I cannot execute any of the two queries. The error "Abort the query cannot be released for OLE DB for OLAP. System error in programm CL_RSR_REQUEST and form PREPARE_VQUERIES:INVALID_
What is my mistake? Thank you in advance! Eve

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

Creating Variable with Replacement Path to get value from ANOTHER Variable

Hi all,
    Is anyone has created the Variable with Replacement Path to get the value from another User Entry Variable, PLEASE ?
First created the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next created the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we should get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path for my requirement, PLEASE ?
The following is from help.sap..com:
Replace with Characteristic Value
Text and formula variables with the processing type Replacement Path can be replaced with a corresponding characteristic value. In the variable editor, on the General tab page, you specify under Reference Characteristic the characteristic that is to be referenced by the replacement. On the Replacement Path tab page, you can choose whether the variable is replaced with the From or the To Value and with the Key or the Name of the characteristic value. You can also specify the Offset Start and Offset Length for the output.
Replace with Variable
Characteristic value variables, hierarchy variables, text variables, and formula variables with the Replacement Path processing type can take their values from a different variable.
The following prerequisites need to be fulfilled:
Variable
●      The variable must not be input-ready
●      The variable must represent a single value
Source Variable
●      The source variable must not be a hierarchy node variable
●      The source variable must be input-ready
●      The source variable must be available in the query
●      The source variable must represent a single value or an interval
In the variable editor, on the Replacement Path tab page, you specify the source variable from which the value is to be determined. The value is either determined from the key, the external attribute of the key, the description, or the attribute value. You can specify an Offset Start and an Offset Length for the output here. The variable is replaced on the variable screen upon each data release.
Thanks,
Venkat.

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

Formula variable with replacement path on system date

Hi Experts,
I got a requirement to calculate "Days without payment" in report level.
Days without payment = System Date - Payment Date.
(Payment date field is available in CUBE, but system date field is not available in the CUBE)
As we know, the difference b/w 2 dates is not possible directly.It can be possible by creating 2 formula variables with replacement paths on the dates and by writing aformula on these 2 formula variables.
But the thing is I dont have system date readily available, and I tried by using SAP Exit. But we cant create formula variable replacement path on another variable (SAP EXIT).
Do we have any SAP variable for formula with replacement path readily avaliable to get system date (or) any other suggession.
Please suggest me.
Thanks,
Sai Chand.S

Hi Arminder,
Thanks for your valuable answer.
I tried doing the same previously.As u said we can get system date by creating customer exit variable.
But the thing is to find difference b/w 2 dates, we cant do it directly, we need to create 2 formula variables with replacement path.
1) Var1 = Formula variable with replacement path on system date(custoer exit variable).
2) Var2 = Formula variable with replacement path on paymanet date.
Number of days = var1 - var2.
But as in 1st point, we cant create formula variable with replacement path on another variable, as system date is already a variable of type customer exit.
We can create replacement paths only on characteristics.
Please suggest me .
Thanks,
Sai Chand.S

Formula Variable with Replacement Path - drillup ref.char and still working

Hi all,
I have a requirement, where formula variable (with replacement path) shouldn't work when I remove the reference characteristic from the rows. But this is not the case at the moment
I have 'Brand' and 'Material' in the rows and there is 'Material Indicator' in the columns. This 'Material Indicator' is a formula and there is formula variable in it with the type replacement path.
Reference char is 'Material'; Replace with 'Attribute Value' is selected also. As attribute I am selecting one of the attributes of the 'Material'.
In the report output, I am seeing relevant attribute values when Material is in the rows. But when I remove the Material from the report, I still see the values for this Material Indicator column. But I expect to see blank instead..
Can you please share your comments?
Thanks in advance.
S.P.

hi,
Irrespective of the drilldown on Material, the fomula variable will be replaced by material value. This is how replacement variable should behave. You might have to change the design. For more inputs, let me know your requirement exactly.

Issue with Replacement path variable

Similar Messages

Maybe you are looking for