Issue with Report refresh of the data

Hi All,
we have recently upgraded from 11.1.1.5 to 11.1.1.7 version of OBIEE and since then we are facing few issue with the data refresh.
whenever the data gets loaded in the back end the report don't seem to get updated. Neither the Reload Metadata or Refresh option works.
We have to explictly have to go on the RPD and update the row Counts of the object and Close all cursor to Reflect the data.
Is there any why we can do this....
Thanks & Regards
Shashank

What about cache setting?

Similar Messages

Issue With Report Builder After Installing SP3 for SQL 2008 R2

Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
Application url   :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
  + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Issue with Report Links in OBIEE

I'm facing a issue with report links(modify,printer friendly,refresh etc) in obiee
The reports which are set as "Display Results-->Embedded in Section" for those reports if I put report links(modify,printer friendly,refresh etc),the links do not show up.In the palce of link I can see "-"(minus sign) appearing.
If I change the report to "Display Results--->Show as link in seperate window" the lniks show up fine.
Any idea why this is happening?
Your suggestions are welcome.
Please help
Regards.
Edited by: 810008 on Apr 14, 2011 1:39 AM

Edit Dashboard -> Report Properties -> Report Links... (directly under Display Results) -> Customize
M.

Issue with Reports using costume measures - BPC 10.0 NW

Hello BPC Colleagues,
I’m having a problem with some BPC reports using costume measures and I would like to have your inputs about this issue.
When all the reports are executed using a costume measures the report execution fails after a long time of execution (7min). The report has 1200 accounts and 57 company codes.
In order to create trial balance we create these costume measure. Basically the measures are standars (with a few changes) and it works for limited reports (few account and companies) but we I try to executed for several accounts and companies I have the following error:
“The execution of report Default Report failed. Please contact your administrator.”
Error while communicating with the server
Framework message:
The underlying connection was close: An unexpected error occurred on a receive.
Summary of the BPC LOG:
|An error occurred while receiving the HTTP response to https://BPCENV.APPSET.MODEL. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See server logs for more details.#
We already increased the PSAPTEMP table and this didn’t fix the issue. At the beginning we were sure that this was an issue with table space but the error persist.
I don’t think (maybe I’m wrong) that this is not an issue related to the costume measure or to authorizations since I can retrieve data if I reduce the request to less accounts an company, so in my point of view this looks like a performance issue.
Just for you, below you will find the details about our measure that generate the problem:
'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER), [MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA],CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
Finally is important to mention that we are using BPC 10.0 NW (SP08)
If you have any suggestion for me I will appreciate.
Thanks you a lot!

Hi Vadim,
Once again, thanks for your help.
We already modified the YTD standard measure but is with that measure that I have problem. Do you think that my new formula is not efficient and for that reason I’m having this problem? Is this correct?.
Below you will find the standard and costume measure. In red I marked the difference between these 2 formulas:
YEAR TO DATE CUSTOME MESURE:
'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER), [MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA],CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
YEAR TO DATE STANDAR MEASURE:
'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER),-[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",-([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),-[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
If you have any suggestion to correct my formula I would really appreciate it.
Regards,

Unnecessary Report refresh on the dashboard when changing the dashboard prompts

Hello All
I have two reports on a dashboard with two dashboard prompts for example Report 1) Year, State, Count; Filter: Year is prompted 2) Year, State, Count; FIlter: State is prompted. On the dashboard we have two reports Report1) and Report 2) with Year and State dashboard prompts.
The issue is when you change year prompt both the reports gets refreshed even though nothing changes on report 2 but it still dissapears and appears as it is refreshing and the same happens with report 1 when i change the state prompt it refreshes that report.
Please letme know how i can limit the dashboard prompt to refresh only the report where it is prompted.
Thanks
Ravi

are you talking about the database table caching? if so we are using OLAP cubes and I am not sure if caching is disabled. Is my issue related to caching? also another updated if I have just one dashboard prompt for example just year only report 1 refreshes and the report 2 doesn't disappear. But when I add state dashboard prompt, which ever prompt I change state or year both reports refreshes. The problem is when I add more than one prompt on the dashboard all the reports refreshes when the dashboard prompt selection changes. Any ideas.
Thanks

Issue with report RBDMIDOC

Hi Gurus,
I have an issue with the report RBDMIDOC. When I run it to the message type MATMAS, it takes 8 or 9 seconds to send the IDoc. With the message type CLFMAS takes 3 seconds.
The duration of the execution of this report depends only of the access to the BDCP and BDCPS tables or is there any other factor that has influence on this time?
The BDCPS table has 300000 entries, and is well indexed.
What could I do to reduce this time?
Thanks and regards,
Manuel Míguez.

[Duplicate Post|Issue with Report RBDMIDOC;

Issue with report Y_DEV_82000038 P & L by period plan.

Hi,
It seems we are having an issue with report Y_DEV_82000038. When we are executing this report then in the output for one line item it is showing one value and when we drill down it it is shoiwng double value of what it is showing in the initial screen of output.
Regards

Hi,
The reports with 'Y' or 'Z' are not standard ones. You have to check with the person who developed this report. Ask to your ABAP team to help you.
Regards,
Eli

Issue with displaying summary in the Page Bottom

Hi Friends,
I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
Regards,
Subbarao

HI,
Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
Eg: Protect
bottom
text
endbottom
endprotect.
Regards,
Venkatesh

Issue with Report Layout

Hi All,
I am working on a report which display employee present or absent in the month. I have to display dynamic column as days varies as per month .
I am done with the report design/query part, using matrix report layout. Report executes and produce expected output too.
Problem:
As this report consists maximum 33 columns (1 = employ name + 31=days in the month + 1=Total days present) I change Page Layout to Landscape.
When I select report output as "pdf" it generates report in Portrait Layout.
Could you please tell me how to fix this issue?
regards,
RSD

Title of this Forum: Forms
Title of this Thread: Issue with Report Layout
I can't point my finger on it, but something feels wrong. Or is it just me ;) ?
Reports has its own forum dedicated to questions related to...reports:
Reports
You have a good chance that you get more answers over there. Also you did not mention any version numbers (reports version, database version,...) so please add these informations over there as well as the solution to your problem may depend on the version of the product you are using.
good luck!
cheers

I am exporting a 2 min video, using a custom compressor setting. i have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

I am exporting a 2 min video, using a custom compressor setting. I have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

Name: Vimeo HD Encode
Description: No description
File Extension: mov
Estimated size: 2.3 GB/hour of source
Audio Encoder
          AAC, Stereo (L R), 44.100 kHz
Video Encoder
          Width: 1920
          Height: 1080
          Pixel aspect ratio: Square
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls On:
                    Retiming: (Best) High quality Motion Compensated
                    Resize Filter: Statistical Prediction
                    Deinterlace Filter: Best (Motion Compensated)
                    Adaptive Details: On
                    Antialias: 0
                    Detail Level: 0
                    Field Output: Progressive
          Codec Type: H.264
          Multi-pass: On, frame reorder: On
          Pixel depth: 24
          Spatial quality: 75
          Min. Spatial quality: 25
          Key frame interval: 30
          Temporal quality: 50
          Min. temporal quality: 25
          Average data rate: 5.12 (Mbps)
Compatible with Mac
My video in the timeline is 1920 x 1080 / 23.98 fps
I've installed Toast and photoshop elements recently, i also updated my apps the other day.
I have had this problem before the updates of the apps though

Having an issue with a page in the internet

Hello,
I registered to the forum a few days ago but did not introduce myself. Please accept my apology.
I have a Blackberry style 9670 model, of which I am very happy with.
I was having an issue with a page in the internet, in which I was receiving errors on my device. My daughter has a Blackberry Curve and she was able to access the page without any errors. I can not figure out why I do.
Thanks

I am not sure if this is the same issue but there was a bug that caused small exchange numbers to become negative which was resolved in one of the 11.1.1.3 patches, it is worth logging into My Oracle Support and having a look at the patches available.
9588147 – In exchange rates table, entering very small values become negative after you save the data forms. For example, 0.000071 becomes –7.1E-5 after you save the exchange rate.
Cheers
John
http://john-goodwin.blogspot.com/

Anyone else having issues with location services since the 7.1 update? Ever since I updated i've been seeing the location services on my status bar at all times.

Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?

The "solution" is probably to increase your knowledge. You've done good things. Perhaps this article will educate you a bit more about location services.
Basically, they can be very useful, but can cause a lot of iPhone use. A major example is "Remind me to ... when I leave home."
http://support.apple.com/kb/HT5594

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

In my opinion, the real solution is for Apple to offer us a choice of the photo sort order in ITunes. My preference would be filename, perhaps with options to choose the Date Taken attribute, file timestamp or date modified filestamp (EXIF date fields as

I tryed to sort my pictures with buying Apps and following suggestion from apple, but without any success. In my opinion, the real solution is for Apple to offer us a choice of the photo sort order in ITunes. My preference would be filename, perhaps with options to choose the Date Taken attribute, file timestamp or date modified filestamp.

Not a problem when using iPhoto on a Mac, which the transfer of photos is primarily based on - not manually managing photo storage as seems to be common with Windoze.
The same should be available with a supported photo management app on a PC.
http://support.apple.com/kb/HT4221

Issue with Report refresh of the data

Similar Messages

Maybe you are looking for