Issue with report (S_ALR_87013611) that is actual/plan line items for Cost

Hi Gurus,
I am having issue with the report (S_ALR_87013611) that is actual/plan line items for Cost Center.
When i execute the report for a cost element  510200 the amount is 23,380.13, but when i drill down on it by double click on that amount the value in obj curr is 15468.91. Hence there is the differnce. When i futher drill down by double click on the amont of 15468.91 and i go to display group currency and take the total it is 23380.13 and display in local / doc currency the amount is 15468.91. I guess due to this there is difference. The cost center & the cost elements are the same i have checket it.
My concerns is that the group curr is USD and obj curr / local curr is USD. So is group curr and doc curr is USD then when i click on dislay curr and select group curr why the amounts are changing.
Kindly adivce

Try to look if there is any filtering criteria applied in the report to which you drill-down.
The difference can be also caused by the "value type" - some reports show actual and statistical costs together in one column while the others strictly show (are defined to show) only e.g. actual costs (type 04) and not the statistical costs (type 11)

Similar Messages

  • Plan cost line items for cost centers report

    Hello,
    I am displaying the report: Plan cost line items for cost centers and when I display the details of a line item it appears a document number, where could I display this document?
    I have tried to display it in FB03 transaction but it seems not to be this kind of document.
    On the other hand in the field Business transaction it appears RKP6, what is the meaning of this field?
    Thank you very much

    Hi Beatriz Amezua ,
    For displaying plan line items for cost center - KSBP and for display of individual plan document : KABP
    RKP6 means "Planning Activity Dependent Costs"
    Like in FI module, the business transaction have been codified and the list you can find in KANK transaction , mention your controlling area, menu -- Groups --  Display Groups
    Srikanth Munnaluri

  • How to check plan line items for plan cost at network activity level?

    Dear all,
    How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
    I am not able to check using CJI4 or CJI9 report.
    Kindly advise.
    Thanks and regards,
    Jessie

    Hi Jess,
    Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
    In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
    But I am not sure if suits your requirements. Wait for other experts to comment on this.
    Regards,
    Amit

  • Transaction KSB1 - Display Actual Cost Line Items for Cost Centers

    Hi,
    When I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my offsetting accounts (accumulated depreciation accounts) are shown except for the ones for asset classes:
    - Buildings
    - PC & Small Applications
    On the FI side, I can see transactions being posted to their relative accumulated depreciation accounts but I do not see this on the CO side when transaction KSB1 is executed. I have checked the config and the account assignments look correct. Also, the assets created have cost centers assigned to them.
    Could you please help!
    Thanks,
    - Deki

    Hi Murali,
    I have one depreciation expense account (P/L Account) which is also a cost element.
    During depreciation run, the different asset classes are supposed to hit the depreciation account above and their corresponding accumulated depreciation accounts (These are Balance Sheet Accounts and I have separate accounts for each asset class .. ie: Accumulated Depreciation for Furniture and Fixture for asset class Furniture and Fixture).
    Now when I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my accumulated depreciation accounts are shown except for the ones for these asset classes:
    - Buildings
    - PC & Small Applications
    Any thoughts on why the above aren't showing?
    Thanks!  I really appreciate your help!
    - Deki

  • Display report : plan line items for internal orders

    When running the report with KOBP tcode, although i have some plan cost line items in the order, i have the message :
    No plan line items were selected
    Message no. KB421
    Could anyone advise?
    However, the report with KOB1 tcode works well and i have the results as expected for actual line items.

    this is may be config issue.
    can you explain with accounting entries for said line items and offsetting GL for each line?
    regards.
    ashok

  • Report KSB2 - CO Committment line item  for Cost center

    When the report is executed, system provides the Fiscal year as next year data.
    Can some body help me in understanding why system behave like this.
    regards
    ARvind

    I got the solution from COEP table.

  • Display projet planned line items CJI4

    i have done planning on wbs *** cost element level in CJR2 along with quantity
    im trying to run report CJI4 but no line item selected.
    No line items were selected
    Message no. KB422
    Diagnosis
    No line items were found.
    Possible explanations:
    You have no authorization for these line items
    You have activated criteria that exceed the initial screen (by means of the 'Further selection criteria' function).
    Procedure
    1. In your user master, check which authorizations you have for reporting
    2. or change the selection criteria.
    how can i resolve it

    This is an extract from help.sap.com:
    In project cost planning, line items are only created if the project or WBS element has a user status to which the business transaction "Plan line items" is assigned. This being the case, plan line items only document the changes made from the time when planning documents are written for a project or WBS element.
    In planning, you can define whether line items should be written in a plan version for cost and revenue planning activities.
    If planning integration is active in the fiscal-year-dependent parameters of the relevant planning versions, the system writes cost element planning line items for plan-integrated WBS elements, regardless of user status.

  • Planned line item to be removed

    Hi Asset Experts,
    Is there a way to remove the following recalculate depreciation planned in asset master in the background?
    Since the year end is already done for 2011, In AW01N for 12 month  it has been posted and planned.
       (1) Posted for 12 month (2) Planned for 12 month.
    How can we remove the Planned line item for the 12th Month for the year 2011.
    Pls reply ASAP
    Kumar

    Hi,
    If your depreciation for FY 2011 has been posted completely and FY 2011 also closed for AA, then there is no point of planned depreciation for 2011 in AW01N.
    Else, you can use tcode AFAR to recalcualte depreciation for your company code and check.
    Regards,
    Srinu

  • Issue with report Y_DEV_82000038 P & L by period plan.

    Hi,
        It seems we are having an issue with report Y_DEV_82000038. When we are executing this report then in the output for one line item it is showing one value and when we drill down it it is shoiwng double value of what it is showing in the initial screen of output.
    Regards

    Hi,
    The reports with 'Y' or 'Z' are not standard ones. You have to check with the person who developed this report. Ask to your ABAP team to help you.
    Regards,
    Eli

  • Issue with report RBDMIDOC

    Hi Gurus,
    I have an issue with the report RBDMIDOC. When I run it to the message type MATMAS, it takes 8 or 9 seconds to send the IDoc. With the message type CLFMAS takes 3 seconds.
    The duration of the execution of this report depends only of the access to the BDCP and BDCPS tables or is there any other factor that has influence on this time?
    The BDCPS table has 300000 entries, and is well indexed.
    What could I do to reduce this time?
    Thanks and regards,
    Manuel Míguez.

    [Duplicate Post|Issue with Report RBDMIDOC;

  • Issue With Report Builder After Installing SP3 for SQL 2008 R2

    Hello.  We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend.  You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
          Server  : Microsoft-HTTPAPI/2.0
          X-AspNet-Version: 2.0.50727
     Application url   :
    http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
          Server  : Microsoft-HTTPAPI/2.0
          X-AspNet-Version: 2.0.50727
    IDENTITIES
     Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
     Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
    APPLICATION SUMMARY
     * Online only application.
     * Trust url parameter is set.
    ERROR SUMMARY
     Below is a summary of the errors, details of these errors are listed later in the log.
     * Activation of
    http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
      + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
    COMPONENT STORE TRANSACTION FAILURE SUMMARY
     No transaction error was detected.
    WARNINGS
     There were no warnings during this operation.
    OPERATION PROGRESS STATUS
     * [10/15/2014 9:35:56 AM] : Activation of
    http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
     * [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
     * [10/15/2014 9:36:29 AM] : Installation of the application has started.
     * [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
     * [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
     * [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
    processorArchitecture=msil.
     * [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
    processorArchitecture=msil.
     * [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
    ERROR DETAILS
     Following errors were detected during this operation.
     * [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
      - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
      - Source: System.Deployment
      - Stack trace:
       at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
       at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
       at System.Deployment.Application.ComponentVerifier.VerifyComponents()
       at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
    notification, DownloadOptions options)
       at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
       at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
       at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
       at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
    COMPONENT STORE TRANSACTION DETAILS
     No transaction information is available.

    Hi DMcGarveyt,
    This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
    Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Issue with Report Layout

    Hi All,
    I am working on a report which display employee present or absent in the month. I have to display dynamic column as days varies as per month .
    I am done with the report design/query part, using matrix report layout. Report executes and produce expected output too.
    Problem:
    As this report consists maximum 33 columns (1 = employ name + 31=days in the month + 1=Total days present) I change Page Layout to Landscape.
    When I select report output as "pdf" it generates report in Portrait Layout.
    Could you please tell me how to fix this issue?
    regards,
    RSD

    Title of this Forum: Forms
    Title of this Thread: Issue with Report Layout
    I can't point my finger on it, but something feels wrong. Or is it just me ;) ?
    Reports has its own forum dedicated to questions related to...reports:
    Reports
    You have a good chance that you get more answers over there. Also you did not mention any version numbers (reports version, database version,...) so please add these informations over there as well as the solution to your problem may depend on the version of the product you are using.
    good luck!
    cheers

  • Having issues with low memory that is causing some of my apps to crash, need help please !!!

    Having issues with low memory that is causing some of my apps to crash, need help please !!!

    Is the device actually showing low memory errors?
    What is really occurring?
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • Issue with Report Links in OBIEE

    I'm facing a issue with report links(modify,printer friendly,refresh etc) in obiee
    The reports which are set as "Display Results-->Embedded in Section" for those reports if I put report links(modify,printer friendly,refresh etc),the links do not show up.In the palce of link I can see "-"(minus sign) appearing.
    If I change the report to "Display Results--->Show as link in seperate window" the lniks show up fine.
    Any idea why this is happening?
    Your suggestions are welcome.
    Please help
    Regards.
    Edited by: 810008 on Apr 14, 2011 1:39 AM

    Edit Dashboard -> Report Properties -> Report Links... (directly under Display Results) -> Customize
    M.

  • I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

    I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
    Anyone had these issues?

    Settings > General > Reset > Reset network settings

Maybe you are looking for

  • Importing clips to imovie hd from external hard drive

    Ok it all started when i wanted to put an hour long clip into imovie HD. I had 54gb left on my computer and just before it finished it told me i did not have enough space on my startup disk. so read forums and people said delete so i took other clips

  • How make a jCheckBox editable in a table with personal TableModel?

    Hi, first of all sorry about my English, ;) I made my own Table Model with this simple characteristics: - All rows isn't editables. - Backgound colors changed. - Get a Object[][] and Strin[] in his constructor. - Accept booleans type and put in the c

  • Unable to create Groups through API

    Hi, I have an approval workflow for creation of a new organization and it works fine.Once the last level of approval is completed, I should create a new org and three groups inside OIM. My adapter creates the new organization successfully. however, I

  • Where are Cost Codes attached to a Project Number in Financials?

    Where are Cost Codes attached to a Project Number in Financials? Don't know where to start looking in the documentation.. I need to know where I can add GL Cost Codes to a particular Project number for our testing of i-Expenses. anybody know? many th

  • Ordering unit different from invoicing unit

    Hi all, My client procures steel. In PO, they want to buy with ordering unit EA, but when invoicing, they want it in KG (because based on the law here, invoice for steel must be in KG). We suggested them to use ordering unit KG because in SAP, PO uni