Issue with Returns created using BAPI_CUSTOMERETURN_CREATE

I have been able to create customer returns using BAPI_CUSTOMERETURN_CREATE in a wed-dynpro java application. However, the issue is when I review the order in VA02 or VA03, the order quantity field is not populated. I input the order quantity in 'TARGET_QTY' field of the RETURN_ITEMS_IN table.
Is the order quantity supposed to go in another field ? Dont see any fields like REQ_QTY in the RETURN_ITEMS_IN table.
Thanks in advance for your response.

Hi,
I think that qty should be in RETURN_SCHEDULES_IN-REQ_QTY
Plus ITM_NUMBER, SCHED_LINE, REQ_DATE have to be filled for schedule line and also RETURN_SCHEDULES_INX for corresponding fields.
Br,
Einar

Similar Messages

  • Issue with Generate Create Script in new ODT 11.1.0.6.10 beta

    I've tried this on several tables in my database. I choose Generate Script to ... a file, for a given table it gives me the error message "An error occurred while writing to fil: \nValue was either too large or too smal for an Int32."
    (It doesn't matter if I'm in a Oracle database project or some other project.)
    Trying to Generate Script To Project... when I'm in a Oracle Database Project, Visual Studio (2005) crashes. It appears to be some overflow exception according to crashinfo:
    EventType : clr20r3 P1 : devenv.exe P2 : 8.0.50727.762 P3 : 45716759
    P4 : mscorlib P5 : 2.0.0.0 P6 : 461eee3d P7 : 407b P8 : a3
    P9 : system.overflowexception
    (With ODT 11.1.0.5.10 beta it worked fine dispite the issue discussed in thread: Re: Issue with Generate Create Script in new ODT 11.1.0.5.10 beta
    /Tomas

    Tried to debug this error and got these exception details. Hope it helps!
    /Tomas
    System.OverflowException was unhandled
    Message="Value was either too large or too small for an Int32."
    Source="mscorlib"
    StackTrace:
    Server stack trace:
    at System.Decimal.ToInt32(Decimal d)
    at System.Decimal.op_Explicit(Decimal value)
    at Oracle.Management.Omo.TableSpaceQuotaDetails.FillTableSpaceQuota(OracleDataReader reader)
    at Oracle.Management.Omo.User.FillTableSpaceQuotas(OracleDataReader reader)
    at Oracle.Management.Omo.Connection.GetUserCollection(Boolean refresh)
    at Oracle.Management.Omo.Connection.GetUsers(Boolean refresh)
    at Oracle.Management.Omo.TableSQLGenerator.GetCreateSQLs(OmoObject obj, ArrayList& typeAndNames, Boolean checkRequired, Boolean appendSchemaName)
    at Oracle.Management.Omo.TableViewBase.GetCreateSQLs(Boolean appendSchemaName)
    at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateCreateScript(OracleUILConnCtx connCtx, String[] objectNames, String objectOwner, OracleUILObjectType objectType)
    at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateCreateScriptAsyncMethod(IntPtr ppvObj, OracleUILConnCtx connCtx, String[] objectNames, String objectOwner, OracleUILObjectType objectType, ICollection& scriptText)
    at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
    at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
    at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
    Exception rethrown at [0]:
    at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
    at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
    at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateScriptAsyncMethodDelegate.EndInvoke(ICollection& scriptText, IAsyncResult result)
    at Oracle.VsDevTools.OracleUILDBProjectServices.OnGenerateScriptAsyncCompletion(IAsyncResult ar)
    at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
    at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
    at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
    at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
    at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)

  • Compatibility issue with developer 6i using (64 bit) OS

    Hi All,
    I am using oracle 9iR2 (32 bit) on Linux Red Hat (32 bit) with developer 6i. Now i want to upgrade OS Red Hat (64 bit) and migrate database 10gR2 (64 bit).Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
    Thanks

    Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
    No, as long as developer 6i is at least patch 16. We use it.

  • Performance Issue with Crosstab Reports Using Disco Viewer 10.1.2.48.18

    We're experiencing Performance Issue (retrieving 40000 rows) with Crosstab Reports Using Disco Viewer 10.1.2.48.18 ( > 01 Minute , executing "Building Page Axis" or executing a Refresh).
    Are there parameters to tun (in pref.txt file) , in order to reduce "Building Page Axis" execution ?
    Note : We've got the same performance problem , using Discoverer Desktop 10.1.2.48.18.
    Thank's in advance for your Help.

    Hi
    Well if the same issue occurs in both Desktop and Viewer then you have your answer. It's not the way that Discoverer is running the workbook its the way the workbook has been constructed.
    For a start, 40000 rows for a Crosstab is way over the top and WILL cause performance issues. This is because Discoverer has to create a bucket for every data point for every combination of items on the page, side and top axes. The more rows, page items and column headings that you have, the more buckets you have and therefore the longer it will take for Discoverer to work out the contents of every bucket.
    Also, whenever you use page items or crosstabs, Discoverer has to retrieve all of the rows for the entire query, not just the first x rows as with a table. This is because it cannot possibly know how many buckets to create until it has all the rows.
    You therefore to:
    a) apply sufficient filters to reduce the amount of data being returned to something manageable
    b) reduce the number of page items, if used
    c) reduce the number of items on the side or top axis of a crosstab
    d) reduce the number of complex calculations, especially calculations that would generate a new bucket
    If you have a lot of complex calculations, you should consider the use of a materialized view / summary folder to pre-calculate the values.
    Does this help?
    Best wishes
    Michael Armstrong-Smith
    URL: http://learndiscoverer.com
    Blog: http://learndiscoverer.blogspot.com

  • Issue with Generate Create Script in new ODT 11.1.0.5.10 beta

    So I'm trying to determine if there's an issue with the Generate Create Script option in the new ODT 11.1.0.5.10 beta (when you right click on a table in Server Explorer).
    The SQL create script that it generates lacks the slash between lines. For example I generated the create script for my User table and this is what was generated:
    CREATE TABLE "DEV"."SYSTEM_USER_TB" ("RID" NUMBER(10,0),"USER_NAME" VARCHAR2(256 CHAR),"APPLICATION_RID" NUMBER(10,0),"FIRST_NAME" VARCHAR2(256 CHAR),"LAST_NAME" VARCHAR2(256 CHAR),"PW" VARCHAR2(128 CHAR),"PW_FORMAT" NUMBER,"PW_SALT" VARCHAR2(128 CHAR),"LAST_ACTIVITY_DT" DATE,"EXPIRATION_DT" DATE,"EMAIL" VARCHAR2(256 CHAR),"PW_QUESTION" VARCHAR2(256 CHAR),"PW_ANSWER" VARCHAR2(256 CHAR),"APPROVED_FLG" NUMBER(1,0),"LOCKED_OUT_FLG" NUMBER(1,0),"LAST_LOGIN_DT" DATE,"LAST_PW_CHANGED_DT" DATE,"LAST_LOCKOUT_DT" DATE,"FAILED_PW_ATTEMPT_CNT" NUMBER(6,0),"FAILED_PW_ATTEMPT_WINSTART" DATE,"FAILED_PW_ANSW_ATTEMPT_CNT" NUMBER(8,0),"FAILED_PW_ANSW_ATTEMPT_WINSTRT" DATE,"CREATED_BY_RID" NUMBER(10,0),"CREATED_DT" DATE,"MODIFIED_BY_RID" NUMBER(10,0),"MODIFIED_DT" DATE) TABLESPACE "USERS" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE ( INITIAL 131072 MAXEXTENTS 2147483645 MINEXTENTS 1 )
    CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
    ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033033" PRIMARY KEY ("RID") USING INDEX "DEV"."XPKSTAFF" ENABLE VALIDATE )
    ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033032" CHECK ("RID" IS NOT NULL) ENABLE VALIDATE )
    CREATE TRIGGER "DEV"."SYSTEM_USER_TRG1"
    BEFORE
    INSERT
    ON "DEV"."SYSTEM_USER_TB"
    FOR EACH ROW
    begin
         select SYSTEM_USER_SEQ.nextval into :new.RID from dual;
    end;
    In my new Oracle Database Project, if I right click on the script and select "Run" or "Run On", the script fails saying:
    Connected.
    CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
    ERROR at line 2:
    ORA-00922: missing or invalid option
    If I then add, a slash between lines, the script runs successfully and creates the table/trigger and whatever else just fine. For example, I changed the above generated code to look as follows:
    CREATE TABLE "DEV"."SYSTEM_USER_TB" ("RID" NUMBER(10,0),"USER_NAME" VARCHAR2(256 CHAR),"APPLICATION_RID" NUMBER(10,0),"FIRST_NAME" VARCHAR2(256 CHAR),"LAST_NAME" VARCHAR2(256 CHAR),"PW" VARCHAR2(128 CHAR),"PW_FORMAT" NUMBER,"PW_SALT" VARCHAR2(128 CHAR),"LAST_ACTIVITY_DT" DATE,"EXPIRATION_DT" DATE,"EMAIL" VARCHAR2(256 CHAR),"PW_QUESTION" VARCHAR2(256 CHAR),"PW_ANSWER" VARCHAR2(256 CHAR),"APPROVED_FLG" NUMBER(1,0),"LOCKED_OUT_FLG" NUMBER(1,0),"LAST_LOGIN_DT" DATE,"LAST_PW_CHANGED_DT" DATE,"LAST_LOCKOUT_DT" DATE,"FAILED_PW_ATTEMPT_CNT" NUMBER(6,0),"FAILED_PW_ATTEMPT_WINSTART" DATE,"FAILED_PW_ANSW_ATTEMPT_CNT" NUMBER(8,0),"FAILED_PW_ANSW_ATTEMPT_WINSTRT" DATE,"CREATED_BY_RID" NUMBER(10,0),"CREATED_DT" DATE,"MODIFIED_BY_RID" NUMBER(10,0),"MODIFIED_DT" DATE) TABLESPACE "USERS" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE ( INITIAL 131072 MAXEXTENTS 2147483645 MINEXTENTS 1 )
    CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
    ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033033" PRIMARY KEY ("RID") USING INDEX "DEV"."XPKSTAFF" ENABLE VALIDATE )
    ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033032" CHECK ("RID" IS NOT NULL) ENABLE VALIDATE )
    CREATE TRIGGER "DEV"."SYSTEM_USER_TRG1"
    BEFORE
    INSERT
    ON "DEV"."SYSTEM_USER_TB"
    FOR EACH ROW
    begin
         select SYSTEM_USER_SEQ.nextval into :new.RID from dual;
    end;
    So, does anyone know if this is a bug? Could I be missing an option to add in the slashes to the generated code? Is there an option to not require the slashes? Could there be another way to execute these scripts?
    Seriously, I think I'm having deja vu from the last release of the Dev Tools: Generate Create Script creates scripts that won't run: ORA-00922: missing..
    ...except this time the documentation says I should be able to use the "Run" and "Run On" commands in the Oracle Database Project (see page 8): http://www.oracle.com/technology/tech/dotnet/pdf/ODT11_whatsnew.pdf
    null

    There are 2 issues in the generated script :
    1. Missing semicolons at the end of the create stmts
    2. Missing slashes
    Both of these fixes will be available in the ODT 11.1 release.

  • Anyone else having an issue with TCP connections using iCloud for Windows?

    Hi,
    Before I asked this question, I did wait to see if any related questions came up, but none did, so I submit it now.
    On my admittedly older laptop running Windows 7 64b Home, I've run into difficulties with the iCloud for Windows app to the extent that I had to uninstall it.
    It would that, as my laptop was running, in the background, iCloudServices.exe would endlessly iterate TCP connections, which, while not actively sending or receiving any data, after some hours would number over 100 instances, taking up resources, and grinding my laptop's WiFi connection to a grindingly slow pace. I ended up, within the app, turning off everything, iCloud Drive and Photos, (I never used bookmarks), but still this would continue to occur.
    I contacted Apple Support, explaining what was going on, and they stated they only dealt with IOS and gave me a Microsoft Support number. When I called Microsoft support, I came more and more to the realization that the issue was specifically with the iCloud for Windows app, as that was the only software that was endlessly creating and not closing TCP connections as it was. How was Microsoft supposed to solve an issue with Apple code?
    So I called Apple back, whereupon they insisted it was a Microsoft issue. I explained other cloud services installed on the same computer were not having the same issue, it was unique to ICloudServices.exe. They stated they only dealt with IOS. I stated I purchased an iPad Air less than 7 months ago, and was trying to run iCloud in support of that.  They again stated they only dealt with IOS, and suggested I again try Microsoft. I asked them if it was reasonable to expect Microsoft to solve issues with Apple code? They said regardless, there was zero support offered for anything having to do with Windows, and all I could do was uninstall the app, which I did, though that did not feel very satisfactory to me. My thinking is, if Apple writes a Windows app in support of their hardware, they should offer support for it.
    Anyway, I was just wondering, is this an issue unique to me? or have others experienced a similar issue? I found this issue by opening the Windows Resource Monitor, looking under the Networking tab, and scrolling through the TCP Connections section to find 100+ concurrent iCloudServices.exe instances listed, whereas even Chrome, with multiple tabs and extensions, topped out at around 20.
    My one month old Desktop, DYI, sports a solid Asus 1150 MoBo, i7-4790k cpu, 16GB Ram, and an EVGA GTX 970 video card. I list some specs only to illustrate this computer has no hardware issues in comparison to my long in tooth laptop. On this desktop, running Win 8.1 Pro 64b,  at least as many, identifiably Apple, background service TCP connections are created even compared to Chrome, regardless of many tabs being open, many extensions, and even some related apps. Adobe does not even come close, though I run the full CC subscription. On this new computer, running Windows 8.1 Pro 64b, there are currently over 50 TCP connections and loopbacks that do not identify themselves, with just a - for the Image, and PID. With the experience on my laptop, I wonder how many of these are generated by Apple software, if not specifically iCloud software?
    The frustrating aspect of these connections is they seem in no way active, While the Chrome and Adobe connections can be seen to be transferring data, as long as I am not running iTunes, or so have my iPad actually plugged in, it seems 99% of the time these iCloudServices.exe connections are just taking up ports, neither sending nor receiving any data discernable to me under the Processes with Network Activity, or Network Activity lists, both displayed in the same window as the TCP Connections in the Windows Resource Monitor.
    Though I am fairly ignorant as regards coding, it seems as if there is no call to close a connection, very specifically, iCloudServices.exe, when it is no longer needed, and the next time a connection is needed, a new one is opened, rather than accessing the one previously opened. The only other reason I could imagine this might be occurring is if my Norton Internet Security software might mask and/or block the port after a certain time of inactivity.
    Anyone out there have any ideas or advice about this? Thanks in advance.

    Thanks jared,
    I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
    So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
    Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
    For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

  • EJB Issue with return empty children in join fetch query

    I'm a newbie and still trying to learn all of the facets of EJB 3.0 (and other backend capabilities) however could not find this issue anywhere resolved.
    I have a recursive table which has a 0,1-n relationship with itself. In this case, I want to query for all objects and fetch the resulting children.
    To do this I have written the following query:
    select o from Node o inner join fetch o.childrenNodeList order by o.nodeorder
    If my database has the following entries:
    Parent
    Child
    Grandchild
    The above query will get all 3 and allow me to access the list of children through getChildrenNodeList, however, for Grandchild this returns "An attempt was made to traverse a relationship using indirection that had a null Session...." for Parent and Child however it works like it should and gets the fetched rows.
    Is there a way for me to either:
    1. Modify the query so that the getChildrenNodeList will return a 0 sized array (so I can test for no children)
    2. Modify the getter such that I can check that the parent really has no children and not some issue with the query
    Thanks for any help,
    Kris

    fixed

  • Issue with WSDL created for sender agreement

    Hi,
    Can you please help me why I am getting the erroe with WSDL that has been created from directory Sener agreement in PI 7.1 EHP1?
    My interface is a SOAP to file ASYNC scenario and we have been given 5 XSDs that are referencing one each other ,5 XSDs are imported successfully and referenced properly,no errors/issues found.
    Created all ESr and directory objects and I tried creating WSDL from sender agreement for my Source/outbound inteface that is created with XSDs in ESR.
    When I try to import WSDL into SOPA UI to validate ,the import process stuck for ever while trying to import "http://www.w3.org/2001/xml.xsd" and finally throws me error.
    After that I tried importing WSDL created in Directory into AltovaXML spy to created the webservice request,I am getting the following error""invalid XML Schema:"xml:lang" is already declared in the schema dcument C:|..my WSDL.
    Even our partner who wants to make Webservice calls using this WSDL,they are not able to develop their Webservices they are getting errors something related to schema not found /not defined etc.
    Please let me know,what might be the issue?I verified several times with my XSD imports and referencing properly and configuration objects.
    Thank you for your help in advance.
    Regards,
    Prem

    Hi Mark,
    I am not getting issue while displaying/Exporting  as WSDL in ESR.I am getting issue while trying import WSDL that is generated out of Service Interface into SOAP UI or Altova XML Spy.
    I don't think PI created the WSDl out of W3 standards.
    This is the error I am getting in XML Spy:
    File C:\Documents and Settings\Prem\Desktop\SI_XYZ_O.wsdl is not valid
         Invalid XML schema: ''xml:lang' is already declared.
              Error location: schema / attribute++
    and in SOAP UI:It is trying to import the WSDL and it stuck for ever while trying to import http://www.w3.org/2001/xml.xsd and never imprts the WSDL into SOAP UI project.
    Please let me know,if you have any ideas.
    Thank you,
    Prem.

  • FDM: Issues with importing mapping using excel files

    Hi All,
    I am trying to map ICP Entries using an excel file.
    I have made 2 mapping (explicit) entries, manually and exported it in Excel and then added all the Mappings in the same file, in proper format. when I am importing, I am not getting any error but the mapping is not getting updated and the new entries are also not getting added. so Ideally no Change in the tDatamap table.
    Environment details: FDM Version 11.1.1.3 is getting used. Target App is Essbase 11.1.1.3. able to connect to Essbase, no issues with connectivity.
    Has anyone face this issue.

    The section of the admin guide I reference will tell you how to create a properly formatted excel workbook. Import XLS will work if the excel workbook is set up properly. The import XLS functionality will not change existing records, only add new ones.
    Your template requires that the first cell is the table name. The second row is the table field names and rows 3 through X are the values to be inserted into the table. The named range beginning with UPS needs to highlight all of these rows and columns.
    Quite honestly, if you take the time to review the admin guide, I'm sure you'll find the answer that you need. Please understand that, like you, most of us that post on this board are consultants. We share knowledge to help the community better utilize the product. It's frustrating to hear that none of the answers that I previously provided you were at all helpful.
    Edited by: TonyScalese on Nov 30, 2010 3:23 PM

  • Issue with Email generation using MAPI32.OCX and Outlook 2010

    Our application use MAP32 OCX to generate an email with an attachment (PDF File), but no email address. The user will select the address from their contacts.
    Right now we have an issue with some Outlook 2010 clients that after about 8 emails , Outlook has an issue and hangs.
    Now if we do a mailto://[email protected] before we create the 8th email, Outlook 2010 doesn't hang.  Is there any setting we can set in Outlook 2010 to prevent the "address checking" when the email is generated or do I have to fill
    the email address with a "bogus" address that the user must then overwrite to prevent this from happening?
    Thanks,
    Chad Newman

    Hello Chad,
    Why do you need to use MAPI instead of OOM?
    I'd suggest automating Outlook instead. See
    How to automate Outlook from another program and
    How to automate Outlook and Word by using Visual C# .NET to create a pre-populated e-mail message that can be edited for more information.
    Also you may find the
    C# app automates Outlook (CSAutomateOutlook) sample project helpful.

  • Weird issues with file share using both SMB and AFP?

    I use my Xserve with 10.4 server primarily as a file server (with a huge RAID array attached via Ultra320 SCSI). I've served files from this server over SMB ("Windows" sharing) to both PCs and Macs for a few years now with no big issues. The files are being shared in a collaborative environment with extensive user accounts and ACLs set up.
    I would like to turn on AFP for these same file shares, so those accessing with a Mac can have the added benefits of AFP over SMB. However, I've heard some rumors of some complicated issues developing from the use of both AFP and SMB together on the same folders, in a mixed environment.
    The rumors I've heard are things that would happen rarely but enough for it to be significant. For example, a file created over SMB and then edited over AFP would have some problems being re-edited over SMB again, due to some complicated feature that the rumor is unable to explain (something with a resource fork or file locking?). Maybe something weird that just involves the Adobe Creative Suite?
    Anyway, I figured I'd throw this out there. Anyone who serves files over both protocols to a varied set of computers and applications having weird issues? Or is everything working for you? Thanks in advance.
    Message was edited by: dtemp

    Thanks for the responses!
    re:crop
    It's coming in as cropped with no way to fix it that I can see.
    Pressing space or opening in preview shows the full image but if it gets anywhere near Photoshop it comes in auto-cropped.
    I'm starting to this it's a bug and will be reporting it to Adobe.

  • Issue with Captivate 8 using IE with HTML5

    I discovered a rather unique situation with Captivate 8 and IE.  We have a SuccessFactors LMS with the content stored on a CDN server (cross domain environment).  I found that when we launched modules created with Captivate 8 using Internet Explorer (ver 9 and higher) we would get a blank page. The same modules published with captivate 7 worked fine.  I discovered that the index.html file was different between the Cap7 and Cap8 versions.  The Cap8 version has 2 new lines in it:
    function OnLoad_Activities()
    var lFrameset = document.getElementById("myFrameset");
    var newFrame = document.createElement("frame");
    newFrame.id = "scormdriver_content";
    newFrame.name = "scormdriver_content";
    newFrame.width = "100%";
    newFrame.height = "100%";
    var lParamString = window.location.toString().split("?")[1];
    The newFrame.width and newFrame.height lines are the new lines.  If I comment them out, the page loads just fine.  Apparently IE has an issue with this.  has anyone else run into this problem?

    Hello ,
    Welcome to Adobe Forums !
    Could you please check the version of Captivate you are using to publish (Go to Help > About Adobe Captivate) ?
    Also check the version of Scorm you are using , Try switching between Scorn 1.2 to Scorm 2004 or vice versa .
    Also try renaming the published output try to keep it simple , means without spacing or any special character.
    Regards
    Himanshu

  • Issues with pagination when using Adobe table with Web dynpro for ABAP

    Hi All,
    I am facing strange issue with table text.
    I have three cols in table, one is of type Char255 and other two cols are of type string.
    The text in the col 1 is displayed perfectly but in other two cols of type string whenever we have pagination the text in table is getting truncated and in next page new row starts.
    Could you please tell me the settings that will enable flowing of text in the row of table to next page.
    Thanks,
    Arti.

    Check the properties of the text field you use for those columns (if you want to control it on this level) or check the same attribute for the row subform (one level up control): "allow page break within content".
    Regards Otto
    p.s.: we all have deadlines... and manage to pay something back. Think about it.

  • Does the Bone tool work with strokes created using the pencil or line tools?

    I have a working bone rig in a document(CS4) that I created using a SINGLE pencil stroke, and applying the armature to it.  Object drawing was off and it was a single piece with no part being a  symbol.  This was accomplished TWICE for two stick figure arms.
    However, when I tried the same thing in a new document, I couldn't apply bone to the pencil stroke or the line stroke.  After going back into the earlier document(where it was still functional) I tried creating a new armature using the exact same technique.  But this time Flash wouldn't allow it.
    Having failed every additional attempt, I'm wondering if Flash may have glitched somehow the first time, allowing this to work when, typically, it doesn't.  Or could I have possibly missed a step somewhere that caused it to fail each attempt at a recreation.

    I agree, it is sometimes difficult to click the sweet spot. Here are 3 suggestions:
    Pay close attention to the cursor icon. It will change when you're over an anchor or direction point.
    Try turning on "Smart Guides". They can be a nuisance, but sometimes they're helpful.
    Use the "Convert Buttons" on the Options bar. They may take a bit longer but they're full-proof, plus, you can convert or delete multiple selected points simultaneously using this method.

  • Issue with SaveAs PDF using XSLFOP

    Hi, We have been using SaveAs method to generate PDF files using XSLFOP technique successfully, however, recently we ran into an issue where a very large report (about 100+ pages) generated a PDF file that could not be opened. We get the following error when we try to open the PDF file. “There was an error opening this document. The file is damaged and could not be repaired.” We tried it again with lesser range of dates and the proper PDF file is generated. (Report was about 35 pages). So we think it has something to do with the large volume of data which is causing the SaveAs method to generate the corrupt PDF file. Any help will be much appreciated !! Note : In the same folder where we have the EXE,PBD and DLLs, we have two subfolders fop-0.20.5 and jre. Thanks, Chirag Vora

    Hello Chirag,
    We submitted this problem to engineering 10 years ago with PowerBuilder 9 !!!
    It appears to be a problem with the FOP processor which needs a large amount of memory to complete the task. You can find similar issues with other tools than PowerBuilder:
    The oXygen-user October 2003 Archive by thread
    As a workaround, you can save the data in XSL-FO format within PowerBuilder, then use the fop.bat file in the \Shared\PowerBuilder\fop-0.20.4\ folder to convert it from outside PB.
    This will still give you the memory error until you modify the batch file to increase the maximum heapsize for java.
    In the fop.bat file change the java start command to : java -Xms64m -Xmx256m ...
    The option -Xms definies the initial heapsize for the java engine and -Xmx the maximum heapsize.
    We believe the default maximum heap is 64MB and this is what it is running into (or running out).
    Setting it to 256MB with -Xmx and it was able to complete
    HTH,
    Jacob

Maybe you are looking for