Issue with right-click menu after latest update

After updating Firefox, the right-click menu is showing much more commands than before (Play, Pause, Mute etc. etc.), most of them out of context ("Open Link in New Tab" when there is no link) and none of them working.

Issues with a massive right-click context menu have been reported as caused by Firebug, so make sure to update Firebug to the latest version.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

Disable (all) functions on the block diagram with right-click menu

Hello to everyone,
here is one more idea, which I'd like to propose.
As for me, it would be useful to have the following: when all components (functions, wires, subVIs, etc.) are selected on the block diagram (like, after ctrl+A), operator could do right-click, and in the menu would appear menu item "Disable everything". After it, all the code could be placed into Disable structure.
Of course, I can add Disable structure to block diagram manually, and cover whatever I want, but with right-click menu it would be much faster.
Also, it can be modified to disable only selected items - then each of them can be placed into separate Disable structure, and, for example, additionaly in the enabled case of Disable structure, corresponding wires will be connected. Sometimes it is needed for testing - just to disable couple functions, and test subVI. Or to disable subVI fully (it's faster, then disable place, where it is called. Especially, if subVI is used in many places).
It will not make debugging difficult, because anyway Disabled structures are used; such functionallity can just make life a little bit easier...

There is always the File->New... which opens up a new window. You can have your templates in that window by putting them somewhere (I don't remember where at the moment).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Strange issue with right click menus in apps

Every now and again the right click menu will stop working in applications. I won't be able to right click at all and sometimes closing and re-opening the app will work and sometimes I will need to restart the computer to fix the issue.
I am running a very simple Fluxbox and SLiM based system and only really use Chromium, Thunderbird, XChat and Gvim on a regular basis but it seems to affect all of them from time to time which suggests to me it is a system wide problem. Does anyone have any ideas as to what may be causing this rather annoying problem?
As an aside this never effects the right click menu in Fluxbox.

Issues with a massive right-click context menu have been reported as caused by Firebug, so make sure to update Firebug to the latest version.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Left clicking mouse acts as if I'm right clicking, and comes up with right click menu?

Hi I was wondering whether anyone could help me with this, I've had this problem for a week or so now and it's beginning to get frustrating.
I have a newish iMac, bought in January, and I've been having this problem the last week or so, where when I left click something, it acts as if I am right clicking it and it comes up with the right click menu. I has happened mostly while on the internet (chrome), but also when I'm just on my desktop, but less often.
It only happens every so often, and rights itself after a couple of minutes. What could be causing this, and how do I stop it?
This is my first ever post on here, so I do apologise if I have been vague or I have posted this question in the wrong section, I am also new to macs (well since January).
The mouse I am using is a dell wired mouse, a couple of years old, which I just plugged in without the need of installing software etc.
Many thanks for any help in advance.

Hello & welcome!
No worries, you did great for a 1st post, & this is generally a friendly place.
It sounds light it's the Mouse button from here, to test it...
Go to System Preferences > Mouse, change the Primary button to the Right button... does the Right button ever do that now as the left button?

Help with right click menu!

Hello. I have a little problem with my right click menu and Firefox. When I right click a document and go to "open with" menu I get about 5 Firefox options along with other applications to open the file; how can I get rid of all this Firefox entries?? I guess they are there because of many Firefox updates from about 2 years but, it should be just one.

Do you have multiple versions of Firefox installed? If so, you either have to remove all but one or live with it.
If you have only one version of Firefox currently installed, rebuild your launch services database:
http://hints.macworld.com/article.php?story=20031215144430486

Need help with right click menu

I have recently upgraded my VLC video player to a new version. Now when I right click on a file to select "open with" I get VLC twice... quite annoying. Can I edit the right click menu and get rid of one of them?
Vignus

For an entry-by-entry method, try this:
http://www.macosxhints.com/article.php?story=20030730161311391
For a more direct approach, try:
http://lifehacker.com/308898/clean-up-finders-open-with-menu
Message was edited by: musicwind95

I lose functions from my right click menu after updating to FF 28

After my FF automatically updated to the current version, I lost a lot of the righ-click context menu functionality. I can no longer 'save page as' or 'save image as'.
It also caused my USPS and UPS programs to get stupid, and will no longer print my shipping labels. If I right-click and 'save page as' the cursor changes to the hourglass and sits there. As soon as I move the mouse the icon turns back to a cursor. It normally would have opened an interface to allow me to save to preferred location.
I removed the new one and reloaded FF 25 and it works correctly, but each morning when I boot up the computer it goes and gets me the new updates and screws me up again. Even with the FF option set to "never check for updates"

Hi Wingunner,
Thank you for your question, lets try to get you up and running.
*[[Fix printing problems in Firefox]]
*Do you have that problem when running in the Firefox SafeMode? [http://support.mozilla.com/en-US/kb/Safe+Mode] Don't select anything right now, just use "Continue in SafeMode." if so try [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
*Save as try: [[What to do if you can't download or save files]]
I hope this helps, if the above information does not resolve your issue, please consider creating a new thread containing the specific details of your issue.
Doing so will allow the Mozilla volunteers to give you solutions that are more helpful to you. This may help them to solve your problem faster and more efficiently.
Please, feel free to post the link to your thread on this thread for volunteers interested in assisting you.
Thank you.

Switchable graphics option not showing in right click menu after windows 8.1 update

I have a Pavilion 15 e016tx laptop. i have recently updated my laptop to Windows 8.1. After updating i am not able to find switchable graphics option which was earlier shown on after right clicking on desktop. I tried to search in shearch charm but couldn't find.
Please help me.

I found Catalyst control center but it shows a alert message " AMD Catalyst Control Center cannot be started. There are currently no setting that can be configured using AMD Catalyst Control Center". Please help.

Import failed with canon 6d footage after latest update

After I updated to Final Cut X 10.0.8, I've been getting "Import Failed" messages during the import process when taking in footage from my Canon 6D
The import process also seems to be going very slow (slower than usual)
I've tried duplicating the SD card locally on the hard drive and re-importing, but have gotten the same results.
If I click OK on the error dialogue box, the import will continue. but another box will pop up every 5 to 10 minutes or so
Any ideas?

Hey Russ, it actually works fine for me too the few times I've used it but I point it out as a common denominator with people who have trouble importing that way. Separating the .mov files into their own folder eliminates the camera and card reader, both much slower than just transfering files from a connected drive. But I'm doing newspaper video with Canon DSLRs - including 5D3 video, similar to 6D - almost daily where speed is of the essence and this is by far the most foolproof method I've come across.

Are yo having any issues with mac os x the latest update heres the fix

ok a lot of people have had issues with installing the update via the software update option in mac os x tiger now let me explain something first it is not apples fault they did not expect that tons of people would be downloading this update at once which caused problems
some of the issues people have run into are
1.the cd rom after the update the superdrive or regular super drive will not read cds
2.your photoshop application stops working or any adobe product stops working
now the simple fix is this
go online to apple.com select the download section in the support area of this web page once this is done
go and download the update manually and run the update manually this will correct any issues with the update including cd rom drive errors and even adobe product errors

ok a lot of people have had issues with installing
the update via the software update option in mac os x
tiger now let me explain something first it is not
apples fault they did not expect that tons of people
would be downloading this update at once which caused
problems
Since Apple know exactly how many systems are out there, have experienced download demands from previous update releases, they very clearly know the kind of demand there will be when a new update for MacOS is released. The issues with Software Update are nothing to do with this - and indeed, historically there have always appeared to be a small proportion of systems that have not functioned correctly with a MacOS update - a quick perusal of MacFixit going back some years would evidence the fact.
When Software Update downloads the wrong components, it's not volume of traffic that causes it, but that when Software Update examines the specific system, it finds components that cause it to misidentify it.
some of the issues people have run into are
1.the cd rom after the update the superdrive or
regular super drive will not read cds
2.your photoshop application stops working or any
adobe product stops working
There are many reasons users may suffer these, and similar (and very DISsimilar) issues, not just from the update itself, but prebinding, permissions, system caches, font files, plists....
now the simple fix is this
go online to apple.com select the download section in
the support area of this web page once this is done
go and download the update manually and run the
update manually this will correct any issues with the
update including cd rom drive errors and even adobe
product errors
You omitted to mention WHICH update file to download - which is the critical part of the advice. Users who experience problems with the update as downloaded by Software Update, should download the 10.4.8 'Combi' update file from the apple/support/downloads page. The combi (combined) update contains the entire thing, not just the bits tailored to what Software Update takes to be the specific system. There are two versions of this file - one for PPC systems and one for Intel - it's important of course to select the correct one for the type of system, being used.
People often say that the Combi update fixes their problem when in fact what may well be happening is that by installing the combi update version, it overwrites faulty files (plists for example) that had caused the problem the user experienced. Installing this version of the update can certainly RESOLVE these kind of problems, but is not the only way to do so.
Simple and easy when it works - undoubtedly so.

Found some severe issues with my Xperia mini after ICS update

Hi,
I am a application and game tester from India and i am using Xperia mini for 7 months, last month i have upgraded my mini with ICS. But the update is not so good as i am facing many problems after updating. I am listing few of my problems below, i dont know this is for my set or with all:
1. If i am forwarding any message and selects 'Add Recipient' option then the phone get stuck in the Contacts list and fails to respond the back button. Also on returning to Home screen and selecting message option after than then Contact list opens instead of Message and to rectify this issue i have to restart my mobile.
2. For my Calenders(i have sync with Facebook) there are lots of event marked on the days but on selecting the particular dates no name is displayed just blank tabs are displayed.
Please reply me is this the problem with all Xperia Minis(ICS)? or i am the lucky one . If this is with all then please fix the issues and make a new update available.
Regards,
Touseef

Hi guys, well as a matter of facts, yes, I have a similar problem, amongst other...
-This feature I use a lot: in GB, when i open conversation, on the top the contact`s name and phone appears, i tap on it and make the call, in ICS, when i tap on it, it opens Contact list from the begining, so i have to find the contact which i want to call. And on the end, back and menu buttons don`t work in that case (like toseefb2 problem), so i have to press the home button....
Maybe, just maybe this happens because i installed Skype, because, after its installation, when i wanted to send an SMS, it asked me which will the messaging app going to be used, Skype or Messaging. I`ve chosen the Messaging and my problem appeared. Only Contacts with picture can be called, and only if i tap the picture...
Please solve this, i don`t want to uninstall Skype, nevertheless, the phone should work regulary even with 3rd party apps.

GT60 issue with keyboard manager software after Windows Update

After a recent Windows update, I've started to get an annoying pop-up when I boot my GT60-0NE. The box says: "Microstar SCM service is stopped!!!" I then have to click OK and immediately get a UAC pop-up asking for permission to run Msiservice.exe which I also have to approve. Finally after clicking OK twice my keyboard will light up. This is Windows 7 64-bit running S-Bar 2.0 (Ver 4.5) and Keyboard LED Manager v1.0.1112.1901
Anyone else seeing this? Could it possibly be related to IE10? I tried disabling UAC but that only got rid of the second pop-up. Still got the SCM service stopped error. Thing is, when you check services it is in fact running not stopped.
Edit: Uninstalled IE10 and the problem went away. If anyone from MSI reads this please take note that either S-Bar and/or KLM have issues running on Windows 7 systems with IE10 installed.

Quote from: Svet on 03-April-13, 20:19:50
you can report this to msi at >>How to contact MSI.<<
Thanks. Did that last night. They said they would inform their software team.

Issues with flickering iPod Touch and latest update (5.0)?

I recently updated my iPod Touch 3G to 5.0. Since updating, the iPod will shut off at will, sometimes flickering, sometimes going straight to the "slide to shut down" screen. Sometimes it will shut down in the middle of an app, I'll start it back up, and it will shut down again immediately. Occasionally, when I start it up after crashing, it will make the camera shutter sound! And there's no camera on this iPod!
This also happened when I upgraded to 4.3.3. but eventually (over several weeks) stopped happening at all. I wiped the iPod clean and reinstalled and all that did was wipe out my settings (of course). Resyncing the iPod worked (apps and music loaded fine), but still it shuts down without warning. I tried installing a new free app, which I read would help, but that didn't work.
Usually I'm pretty good at figuring out these sorts of issues, but I'm at my wits end. My iPod is a little over 18 months old. Is anyone else having these problems? Am I screwed?

Okay, so now I have read that you have to install a free app through the phone, not through the computer. I've done so and it looks like everything is good for now. Keeping my fingers crossed. My question now, is that if this is a common occurance with the 4.3.3 update, why did Apple imply that I needed to wipe my iPod clean when this was the much easier and less invasive answer?

ALV: Issue with double click event after sorting the ALV

Hello Experts,
I have an internal table that populates an ALV grid. When the user doubleclicks a row, my method HANDLE_DOUBLE_CLICK returns the e_row-index value from the ALV Grid. I use this index value to read the internal table, then retrieve additional data.
My problem is the user may sort the ALV grid before double clicking on a line. If this happens my internal table is not sorted to match the ALV grid, so reading the internal table with the e_row-index value returns the wrong information.
When the double click event occurs, is it possible to capture the value in column 1 instead of a value for e_row-index?
There is one more paramter in HANDLE_DOUBLE_CLICK for row id.   It is coming blank in debugging . what is the purpose of this parameter and how i can make use of it ?
Regards
Vivek

Hi,
I am Posting The Code Which Uses Double Click Event.
And This Code will provide the total information to you.
REPORT ZALVGRID_PG.
TABLES: SSCRFIELDS.
DATA: V_BELNR TYPE RBKP-BELNR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: IRNO FOR V_BELNR.
PARAMETERS: P_GJAHR TYPE RBKP-GJAHR.
SELECTION-SCREEN END OF BLOCK B1.
DATA: WA TYPE ZALVGRID_DISPLAY,
      ITAB TYPE STANDARD TABLE OF ZALVGRID_DISPLAY.
DATA: IDENTITY TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: L_IDENTITY TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: L_TREE TYPE REF TO CL_GUI_ALV_TREE_SIMPLE.
TYPE-POOLS: SLIS,SDYDO.
DATA: L_LOGO TYPE SDYDO_VALUE,
      L_LIST TYPE SLIS_T_LISTHEADER.
END-OF-SELECTION.
CLASS CL_LC DEFINITION.
PUBLIC SECTION.
    METHODS: DC FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID IMPORTING E_ROW E_COLUMN.
ENDCLASS.
CLASS CL_LC IMPLEMENTATION.
METHOD DC.
    DATA: WA1 TYPE ZALVGRID_DISPLAY.
    READ TABLE ITAB INTO WA1 INDEX E_ROW-INDEX.
    BREAK-POINT.
    SET PARAMETER ID 'BLN' FIELD WA1-BELNR.
    CALL TRANSACTION 'FB02'.
ENDMETHOD.                    "DC
ENDCLASS.
DATA: OBJ_CL TYPE REF TO CL_LC.
START-OF-SELECTION.
PERFORM SELECT_DATA.
IF SY-SUBRC = 0.
    CALL SCREEN 100.
ELSE.
    MESSAGE E000(0) WITH 'DATA NOT FOUND'.
ENDIF.
INCLUDE ZALVGRID_PG_STATUS_0100O01.
INCLUDE ZALVGRID_PG_LOGOSUBF01.
INCLUDE ZALVGRID_PG_SELECT_DATAF01.
INCLUDE ZALVGRID_PG_USER_COMMAND_01I01.
***INCLUDE ZALVGRID_PG_STATUS_0100O01 .
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'AB'.
* SET TITLEBAR 'xxx'.
IF IDENTITY IS INITIAL.
    CREATE OBJECT IDENTITY
    EXPORTING
      CONTAINER_NAME = 'ALVCONTROL'.
    CREATE OBJECT GRID
    EXPORTING
      I_PARENT = IDENTITY.
    CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
         I_STRUCTURE_NAME              = 'ZALVGRID_DISPLAY'
      CHANGING
        IT_OUTTAB                     = ITAB.
    CREATE OBJECT OBJ_CL.
    SET HANDLER OBJ_CL->DC FOR GRID.
    ENDIF.
    IF L_IDENTITY IS INITIAL.
      CREATE OBJECT L_IDENTITY
      EXPORTING
        CONTAINER_NAME = 'LOGO'.
      CREATE OBJECT L_TREE
      EXPORTING
        I_PARENT = L_IDENTITY.
      PERFORM LOGOSUB USING L_LOGO.
      CALL METHOD L_TREE->CREATE_REPORT_HEADER
        EXPORTING
          IT_LIST_COMMENTARY    = L_LIST
          I_LOGO                = L_LOGO.
      ENDIF    .
ENDMODULE.                 " STATUS_0100 OUTPUT
***INCLUDE ZALVGRID_PG_LOGOSUBF01 .
FORM LOGOSUB USING    P_L_LOGO.
P_L_LOGO = 'ERPLOGO'.
ENDFORM.                    " LOGOSUB
***INCLUDE ZALVGRID_PG_SELECT_DATAF01 .
FORM SELECT_DATA .
SELECT RBKP~BELNR
         RBKP~BLDAT
         RSEG~BUZEI
         RSEG~MATNR
         INTO TABLE ITAB
         FROM RBKP INNER JOIN RSEG
    ON RBKP~BELNR = RSEG~BELNR
    WHERE RBKP~BELNR IN IRNO
    AND RBKP~GJAHR = P_GJAHR.
ENDFORM.                    " SELECT_DATA
***INCLUDE ZALVGRID_PG_USER_COMMAND_01I01 .
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'CANCEL'.
       EXIT.
       ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
Warm Regards,
PavanKumar.G
Edited by: pavankumar.g on Jan 19, 2012 5:30 AM

Issues with mouse clicks/jumps after using CleanMyMac App.

Since using this app. my hitherto slightly slow responding iMac has required multiple mouse clicks and is less/unresponsive.
Anyone else used this software?
As yet have not approached CleanMy Mac.
I have reinstalled Mountain Lion (download) not clean install.
Any suggestions? Is there a separate app for mouse that I can reload. Im guessing a minor chunk of code was deleted along with rubbish.
Reg25x

Uninstall CleanMyMac and do not reinstall it.
CleanMyMac is one of a broad category of time- and money-wasters capable of causing system corruption that can only be rectified by reinstalling OS X, restoring from a backup, or completely erasing your system and rebuilding it from the ground up. Get rid of it and test your Mac for operation. If it does not perform normally, the possibility that Cleanmymac resulted in system corruption must be considered.
The vast majority of Mac problems reported on this site are the direct result of having used garbage like that. Never install such junk on a Mac.

Issue with right-click menu after latest update

Similar Messages

Maybe you are looking for