Issue with risk analysis report in GRC10.0

Hi All,
We are running the user risk analysis report from NWBC: Reports and Analytics -> Access Risk Analysis Reports -> User Risk Violation report.
This report is not fetching all the data even though user has all the required authorizations.
We are getting the data when we execute the dashboard reports.
Any one has idea?
Cheers
Hari

Alessandro,
Thanks for the reply. I am aware of this.
Problem is when dash board report is showing the risk for the user but risk anaylsis report in Reports and Analytics is not showing the risks to that user.
As per our investigation, the risk data that is displaying in the risk anaylsis report in Reports and Analytics is incomplete. We didn't find any errors in SLG1. Also there is no issues from authorizations side.
Regards
Hari

Similar Messages

Issues with Vendor analysis report

Hi Guys,
We raun this standard report using transaction MC$4. For the month of November we started getting output as 0. This report is standard and not sute if there is any inconsistancy.
Any input on this is welcome.
Thanks,
Gajanan Nadkarni

Hi Kunal,
Thanks for the updates. The report is working okay for October, I still have open POs in November. But the report is not working. Not sure if there is any inconsistancy in table s012.
Thanks,
Gajanan

Risk analysis Report Error in GRC AC 10.0

Dear GRC,
I had problem with Risk analysis Report in GRC Access Request form
When i run the Risk analysis report on Action Level , Permission Level , Critical Action Level and Critical Permission Level then report showing as "No Violations" but if i run the Risk analysis report only on Critical Action Level and Critical Permission Level then report showing too many Violations.
I maintained Action Level , Permission Level , Critical Action Level and Critical Permission Level as default risk analysis type in SPRO Configuration Parameters settings.
i am not understanding why system behaves like this. Could you please help me on this.
System Details : GRC AC 10.0 , SP-12
Thanks a lot for swift response.
Best Regards,
RK

Hi GRC Team,
Please help me on this. I am waiting for your replay.
Regards,
KR

Ad hoc Risk Analysis report is returning incorrect Risk Level for some Risks

We are running GRC AC 10.0 with SP 16. After application of Support Pack 16, some of our ad hoc risk analysis reports are returning incorrect risk levels. For example: Risk F024 Open closed periods and inappropriately post currency or tax entries is set as High. When the Ad hoc report is run, the risk F024 will show on a user with a level of Medium. We have generated our ruleset and have followed the normal procedures used to implement the support pack. Any ideas what is causing this issue? I have exhausted my knowledge and search attempts.
Any help is appreciated.
Sara B.

Hi Kevin
Many thanks for your post, we did run a full BRA but no luck unfortunately. Some Risks still reporting as Medium when they should be Critical or High. Oddly it is reporting correctly against some risks just not for all!
Cheers
Hussain

Risk Analysis Reports Format

Hello Experts,
What is main difference between Risk Analysis Report Formats ....
Summary
Detail
Management Summary
Executive Summary
Please explain in depth and which scenarios we are using these reports. Please give a one business example.
Regards,
Babu

Dear Babu,
trying to help you.
Summary: gives you an overview of conflicts on action level. Can be used to discuss with business what is causing the risk.
Detail: gives you an overview of conflicts on authorization level. Can be used to analyze how a conflict can be removed.
Management summary: gives you an overview of risks on user level. Can be used to report how many risks are currently in the system on user level. E.g. userA has 3 risks, userB has 2 risks, etc.
Executive Summary: gives you an overview of risks on risk level. Can be used to have a general overview of applicable risks in the system. E.g. riskA has no conflicts, riskB has 7 conflicts, etc.
Best if you just analyze and you will see the differences. If you have a particular question do not hesitate to contact us.
Regards,
Alessandro

GRC_10 Risk Analysis Report

Hi,
i should extend the risk analysis report with more details from diffrent tables, they hold special role details.
I havent found an idea how to do this.
Could i extend the standard report for risk analysis with more columns?
Is there something like user.exits or enhancement-points?
thank you very much indeed
best regards
Alex

Hi Alex,
did you have a chance to look at standard SAP Help information about different types of reports and information available?
If not yet -please take a look at:
Risk Analysis Reports - SAP GRC Access Control - SAP Library
What exactly information you would like to add to reports?
Standard reports can by customized by adding some additional fields which are hidden in standard view.
There is also an option to add custom fields and data,
Lets us know,
Filip

Role Based Risk Analysis Report

Hello All,
When I executed the Risk Analysis report for a role with SOD Risk Level = ALL and Report type = SOD at Authorization Object level, the results come back as "NO CONFLICT FOUND". this is the correct response.
However, I executed the Risk Analysis report for the same role with SOD Risk Level = HIGH and Report type = SOD at Authorization Object level, the results come back SOD conflicts based on the conflicting transactions. Is there a bug with analyzing roles using this option?
Also, when I click on the Detail Report button, I received object data that does not appear correct.
Please Help. Thanks.
Edited by: Michael Johnson on Apr 8, 2009 8:54 PM

Hi Babiji,
Are you using any specific tools for SOD's? If you are using GRC tool, then it can be done using compliance calibrator Role level Risk analysis.In addition to what Sneha has said,
To find out the conflicting roles in CC version 5.2 the path is INFORMER->Risk Analysis->Role level.In Virsa 4.0 you have the option of carrying out risk anaysis at role level by executing the t-code /N/VIRSA/ZVRAT.
In section Analysis type, choose Roles and enter the list of roles.
In section SOD Risk level, choose the appropriate risk.
Then choose the appropriate report type and report format before executing it.
This will display all the roles with the levels of risk associated with it and then you can mitigate these as per your organizational policies & procedures.
Thanks,
Saby..

Issue with Exceptions in Reporting

Hi BW Gurus,
            I am still new to BW, Like I have a issue with exceptions in reporting.
            Let me explain clearly, I created a report which gives me two MRP values they are for example V1 and PD(there other MRP types but I am focusing only this two). Here I can see in my report those two values and the overall result of all MRP types (they are 6 different types). My report looks like this for examply
   V1                  46,782,434(this are rough figures)
   PD                  56,232,453
   Overall Result      102,434,111
        Here my requirement is I need to find this overall result like accroding to thresold values this overall result shows RED,YELLOW,GREEN.
        I have given threshold values in exceptions. like
   0           -
> 45,000,000(Red)
   45,000,001 -
> 65,000,000 (Yellow)
   65,000,001 -
> 500,000,000 (Green)
       But according to this values I should get Red( Overall Result), I cant see any change in the overall result.
       Please can some one give advice how to reflect this threshold values in my report.Or I have to select any other options in exceptions.
       Thanks in advance.
Regds
Sam

Not really possible with BEx functions, but if you provide a workbook to users you can just type in this information in a non-Bex cell and save the workbook.
Else you can try to name your exception such that it shows the value ranges. Then in the report, from the toolbar Layout > Display Exceptions.
Hope this helps...

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Risk analysis reports in IDM 6.0

Hi
I was trying to run risk analysis report to detect deleted users in Red hat linux. I was not sure what report to run. I tried various things like user report, resource accoutn report etc. However these reports gave the the list of users deleted in IDM but not the resource. Can i somehow create a customized report to do this?
Any help regarding this matter is appreciated
Thanks
Man

Hi,
Please check following path in easy access
1) Accounting ->Controlling -> Product Cost Controlling ->Product Cost Planning ->Information System
2) Accounting ->Financial Accounting ->Fixed Assets ->Information System
Best Regards,
Madhu

GRC AC 10 (BRM) Risk Analysis Report type is editable

Hi,
In GRC10 – BRM Risk analysis at “Action Level”, “Permission Level”, “Critical Action”, “Critical Permission” and “Critical Role/Profile” is editable.
When i start to create a role in the Risk Analysis step, Permission Level is always selected .Selection is fine as this is configured this way (Parameter in SPRO 1023 -Default Report Type for Risk Analysis). But exist the option to deselect "Permission Level".
As you can Permission level is always selected and not editable?
Regards

Hi,
I guess Cristian mentions attached BRM screen. I have same issue; how to change default values of report type in BRM like parameter 1023 changes in access request.
Also, if we change default value of check box, Cristian can set non-editable fields through SE80.

GRC Risk analysis reports are not checking all possible risk conflicts set up in the rule set that lead to risks.

Dear All,
After running the risk analysis it shows only the first conflict for a risk in the rule set (Rule ID 0001). We have already Generated SOD ruleset. Also during migration from 5.3 to AC10.1 all the rulesets were imported properly.
What could be reason??
Thanks for your help.
Regards,
Abhisshek

Abhisshek,
there is already a thread with the same question: Dear all I only get result for one rule id and not with others what should be an issue?
Regards,
Alessandro

Can you download RAR Risk Analysis reports to something other than Excel?

When you run a RAR Risk Analysis and go to export the resulting reports, RAR automatically exports this into an Excel spreadsheet.
Is it possible to export the reports into some other kind of format/tool? (SQL would be ideal.)
We are on GRC 5.3 SP13.
Thanks.

Our CMG group runs a company-wide risk analysis 2-3 times a year to use in their SOD Review process. We are looking into loading this report into QuickView to give them more capabilities with using the report. QV will work with Excel, but you have to load every spreadsheet and every page separately.
We are looking to see if we could download it into some other format that would contain all of the report in just one file. Would make the QV load easier. Something like SQL would probably be ideal.
Thanks.

Hierarchy issue with Web Intelligence Report

Hi All,
We are facing an issue with OLAP Universe where we are using hierarchy for cost center in reports.
BEx query shows correct data in RSRT with hierarchy nodes.
We have built a Universe on top of this BEx Query.
We are using couple of nodes of cost enter hierarchy in WebI report but if we keep more than one node in WebI query, data comes double (probably because of duplicate rows). Instead if I keep just one of the node in WebI query, WebI report returns correct data.
Please suggest, why such behavior with OLAP universe and how to resolve this?
Best Regards,
Ashish

Thanks for your suggestions.
I am little confused on how to check SQL generated for OLAP WebI Query.
But other reports on same universe behave same way and I'll give a try to another universe but I don't expect it to behave in different way. I saw a setting for relational Universes like restriction on duplicate rows but the same is not present in case of OLAP Universe.
Do you know how WebI behaves with BEx hierarchies?
There has to be some setting to make it work...
Best Regards,
Ashish

Issue with printing lockbox report

Hi,
My lockbox report after processing file is giving the total amount and check amount correctly but when I print the same report, the figures don't match with the correct report figures for check amount and advice total.
Please help....
Thanks,
Sheel
Edited by: Sheel Ahuja on May 19, 2010 11:11 PM

Hello,
Please, open a message for SAP on the OSS Marketplace. There are some notes for this type of issue, but they are currently in pilot release.
So, open a message describing the issue and providing a reproducible example in your system.
REgards,
REnan

Issue with risk analysis report in GRC10.0

Similar Messages

Maybe you are looking for